Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Electronic Repair and Overhaul of Automatic DA Server

Active

Federal

Response Deadline11/27/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the electronic repair and overhaul of the Automatic DA Server (NIIN: 016890513) to support prime contractors on Department of the Navy projects. The scope of work includes the complete teardown, evaluation, and modification of server units to identify failures and execute necessary repairs in accordance with technical orders and drawings. The contractor is responsible for validating functional requirements for Cage Code 52088 and ensuring all units receive physical identification per MIL-STD-130 standards to deliver fully operational equipment. Managed by the Navsup Weapon Systems Support Mech under the Department of Defense, the project falls under NAICS code 334419. The solicitation was posted on October 21, 2026, with a response deadline set for November 27, 2026.

General Info

Electronic repair and overhaul of Automatic DA Servers for Department of Navy projects.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

334419 - Other Electronic Component Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QNE27.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SERVER,AUTOMATIC DA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineNov 27

Submission deadline

Response Deadline

11/27/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs teardown, evaluation, repair, and modification of the SERVER, AUTOMATIC DA (NIIN: 016890513) for prime contractors on Department of the Navy projects. Disassembles units to identify failures, executes repairs per technical orders and drawings, and validates functional requirements for Cage Code 52088. Applies physical identification per MIL-STD-130. Delivers a fully repaired and functional server unit.

Similar Contracts

Same NAICS industry code

Supply of Specialized Electronic Components for Antenna ControlThis subcontract involves the supply of specialized electronic components, circuit boards, or housings for antenna control systems supporting DLA Mechanicsburg naval projects. The selected provider will deliver individual parts or component kits to prime manufacturers, ensuring all items strictly adhere to TDP Version 004 specifications. To qualify, the contractor must maintain an ISO 9001 quality management system certification and provide Certificates of Conformance verifying that all supplied components are free of metallic mercury. The opportunity is managed under NAICS code 334419 for the Department of Defense, with a response deadline set for November 20, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Light Signal Receiver (NSN 017138790) SupplyThis subcontract involves the manufacture and supply of Light Signal Receivers for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work requires the production of units according to specific Cage Codes and reference numbers OGX96 SFP-10/25G-LR-S and 1KH72 SFP-10/25G-LR-S. The contractor is responsible for delivering between 112 and 224 units on a FOB Origin basis. Strict adherence to military standards is required, including marking per MIL-STD-130, REV N and packaging per MIL-STD-2073. Additionally, the provider must hold OEM authorization and ensure full compliance with DFARS 252.211-7003 regarding Item Unique Identification. This effort falls under NAICS code 334419 for the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Industrial Control Electronics & Signal ConversionThe Industrial Control Electronics and Signal Conversion subcontract involves the supply of electronic signal processing hardware to prime contractors supporting NASA Shared Services Center propulsion testing projects. The scope of work requires the design and production of circuitry capable of analog temperature output in 4–20 mA, 0–20 mA, or 0–10 VDC, as well as the implementation of non-volatile memory logging systems utilizing EEPROM or Flash. All delivered signal processing boards and analog output modules must maintain full compatibility with the FMPI temperature measurement ecosystem. This opportunity is categorized under NAICS code 334419 and was posted on October 21, 2026. Interested parties must adhere to a brief response window, with the deadline for submissions set for October 23, 2026, at 5:00 PM.

NASA Shared Services Center

POSTED

about 7 hours ago

DEADLINE

Power Supply Unit Supplier (OEM or Authorized Distributor)This subcontract opportunity is for a supplier to provide specialized power supply units, specifically part number SGA30X501E-2JAAAJ and NSN 6120-01-664-9589, to prime contractors supporting DLA Mechanicsburg procurement projects. The selected vendor must be an Original Equipment Manufacturer or an authorized distributor capable of manufacturing or sourcing units that strictly adhere to the technical requirements outlined in Sections C, D, and E. If the supplier is not the OEM, they are required to provide the OEM CAGE code and part number. The contractor is responsible for the delivery of completed units and must maintain detailed inspection records for a period of 365 days. This procurement is managed under NAICS code 334419 for the Department of Defense. Interested parties must submit their responses by the deadline of November 20, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Supply of Electronic Component (NSN 7RH 5998-01-374-4843 LX)This subcontract involves the supply of eight units of electronic component NSN 7RH 5998-01-374-4843 LX, part number N00383-26-X-1105, for prime contractors supporting DLA Aviation projects under the Department of Defense. The supplier is responsible for ensuring the provenance of all components through government-approved sources and must provide official authorized distributor letters to verify authenticity. To qualify, the provider must maintain ISO 9000 certification and ensure compliance with NIST SP 800-171 standards. Additionally, because the components are classified as Critical Safety Items, strict adherence to DFARS 252.209-7010 is required. The opportunity was posted on October 21, 2026, with a response deadline of November 20, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 7 hours ago

DEADLINE

in about 1 month

61--WIRING HARNESS

Solicitation # SPE4A627Q0144

POSTED

about 7 hours ago

DEADLINE

DRAWER ASSEMBLY,SIG

Solicitation # N0010426QNE60

Solicitation N0010426QNE60, issued by NAVSUP Weapon Systems Support, is a request for quotations for the repair of several National Stock Number items, including Filter Assemblies, Electronic Components, and Drawer Assemblies. The scope of work involves the teardown, evaluation, and repair of these assets to meet specific operational and functional requirements, with a requested repair turnaround time of 140 days. The government has included an option to increase the quantity of each item by up to 100 percent for 259 days after receipt of order. All repair work must adhere to original manufacturer specifications and contractor standard practices, and the government requires source inspection and acceptance at the origin. Key contractual requirements include strict adherence to MIL-STD-129 and MIL-STD-130 for marking and identification, as well as MIL-STD-2073-1 for packaging. The contract mandates that all materials be mercury-free and requires compliance with ANSI/ESD S20.20 for electrostatic discharge control on electronic parts. Offerors must submit quotes via email to the designated point of contact, providing detailed pricing for unit repairs and beyond repair scenarios, along with their CAGE codes and throughput constraints. Invoicing and payment will be managed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

ELECTRONIC COMPONEN — 5998013744843 — SPRPA127QYA17

Solicitation # SPRPA127QYA17

Solicitation SPRPA127QYA17 is a fixed-price request for quotations issued by DLA Aviation at Philadelphia for an electronic component, NSN 5998-01-374-4843 LX. This opportunity is a small business set-aside under Emergency Acquisition Flexibilities authority, with a response deadline of November 20, 2026. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Technical acceptability is strictly limited to government-approved sources of supply, and distributors must provide an authorized distributor letter on the source's letterhead to be considered. The contract requires delivery within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin. Strict adherence to military packaging and marking standards is mandatory, specifically MIL-STD-2073 for packaging and MIL-STD-129 for marking. Additionally, the contractor must comply with cybersecurity requirements under DFARS 252.204-7012 and provide hazardous material certifications if applicable. Payment will be processed electronically through the Wide Area Workflow system. Evaluation of offerors will include risk assessments via the Supplier Performance Risk System, focusing on item, price, and supplier risk.

Pa DLA Aviation At Philadelphia

POSTED

about 15 hours ago

DEADLINE

in about 1 month

SEL-651R Control System ProviderThis subcontract agreement involves the supply and integration of electronic control systems for prime contractors working on Peabody Municipal Light Plant projects in Peabody, Massachusetts. The scope of work requires the provision of SEL-651R control units, the installation of six Low Energy Analog voltage sensors, and the integration of necessary batteries and power supplies. The selected provider is responsible for configuring single-mode fiber optic, Ethernet, and RS232 communication ports according to manufacturer specifications. Final deliverables consist of configured control units fully installed within recloser assemblies. The solicitation was posted on October 20, 2026, with a response deadline of November 5, 2026.

PMLP - Peabody Municipal Light Plant

POSTED

DEADLINE

Motional Transducer Fabrication (OEM/Specialized Manufacturer)This subcontract involves the specialized fabrication of Motional Transducers, identified by NIIN 015356450, to support prime contractors under DLA Mechanicsburg supply contracts. The manufacturer is required to produce these units in strict accordance with TDP Version 007 and Cage Code 07482. The scope of work includes the physical identification and marking of all units per MIL-STD-130, REV N, with a requirement to maintain all inspection records for a period of 365 days. The final deliverable consists of finished, marked, and packaged transducers provided to the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Manufacture of ASSY, RECT & PANEL (NIIN: 200087698)This subcontract involves the manufacture of complete Rectifier and Panel Assemblies, identified by NIIN 200087698, for prime contractors supporting DLA Mechanicsburg supply contracts. The scope of work requires the fabrication of hardware based on Cage Code 38200 and reference number 148968-1, with a strict requirement that all physical identification and marking adhere to MIL-STD-130, REV N. To maintain quality and compliance, the manufacturer must utilize specialized electronics assembly equipment to guarantee that no refurbished materials are incorporated into the final product. The ultimate deliverable is the finished Rectifier and Panel hardware, produced under NAICS code 334419 for the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Manufacture of Air Sensors (NIIN: 006011423)This subcontract involves the manufacture of air sensors for prime contractors supporting Department of the Navy projects under the Navsup Weapon Systems Support Mech. The scope of work includes the fabrication and assembly of sensors identified by NSN 2835-00-601-1423 and NIIN 006011423, strictly adhering to TDP Version No. O15. The contractor is responsible for ensuring design compliance with specified Cage Codes and delivering the finished products to designated RGN shipping locations. Strict adherence to regulatory and quality standards is required, specifically MIL-STD-130, Rev N and the domestic content mandates of the Buy American Act. The project falls under NAICS code 334419. Interested parties must note the response deadline of October 26, 2026, for this Department of Defense requirement.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves providing specialized packaging and physical identification, ensuring all assets are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073 and MIL-DTL-197. The contractor must utilize industrial marking equipment and adhere to POP-certified hazardous materials packaging standards as mandated by 49 CFR and FED-STD 313. The ultimate objective is to deliver packaged assets that are fully prepared for FOB Origin shipment through the Navy's CAV system. This opportunity falls under NAICS code 561990, with a response deadline set for November 4, 2026.

All Other Support Services

POSTED

about 7 hours ago

DEADLINE

Supply of Replacement Parts for Thrust Shoe w/InstrThis subcontract involves the supply of OEM or approved replacement parts, seals, and hardware for the Department of Defense under the Navsup Weapon Systems Support Mech agency. The scope specifically focuses on providing components for Thrust Shoe w/Instr that meet Reference Number 482480-008 and NSN 016233028 specifications. To ensure quality and authenticity, the provider must submit proof of authorized distributor status from the original manufacturer. The contract mandates a strict delivery schedule with a certified replacement component Repair Turnaround Time of 23 days. Interested parties must respond by November 4, 2026, under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Repair and Modification of Thrust Shoe w/InstrThis subcontract involves the teardown, evaluation, repair, and modification of Thrust Shoe w/Instr (NSN 016233028) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider must be an authorized distributor of the original manufacturer and is required to disassemble and assess assets using precision tooling and technical orders in accordance with CAGE 75333 and Ref No. 482480-008. The primary objective is the delivery of a fully repaired and modified asset that meets all specified functional requirements. This opportunity falls under NAICS code 811210, with a response deadline set for November 4, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 7 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Hydrostatic CertificationThis subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech, involves providing specialized non-destructive testing and hydrostatic certification for critical safety items on Naval Sea Systems Command projects. The scope of work includes performing hydrostatic testing at 150 percent pressure, dye penetrant inspections, and quantitative chemical and mechanical analysis of titanium alloys to ensure structural integrity and safety compliance. Qualified contractors must hold a Confidential security clearance and possess ASNT Level II or III certifications to perform these technical evaluations. The primary deliverables for this engagement are certified test reports and detailed analysis data. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Torlon 4503 Valve SeatsThis subcontract involves the fabrication and supply of six high-performance polymer mating seats for prime contractors supporting Naval Sea Systems Command shipboard projects. The components must be manufactured from Torlon 4503 polymer in strict accordance with Electric Boat Specification 4147 and drawing specifications DN330635C5 and DN330635C9. To qualify for this engagement, the provider must maintain Confidential clearance and provide Mercury-Free certification. Final delivery of the mating seats requires the inclusion of Certificates of Compliance to ensure all technical and quality standards are met.

All Other Plastics Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Precision Machined Titanium Ball for 3" Ball ValveThis subcontract through the Department of Defense and Navsup Weapon Systems Support Mech involves the manufacture and supply of three high-precision titanium balls for 3 inch ball valves used in Naval Sea Systems Command shipboard projects. The contractor must utilize centrifugal casting for 6AL-4V titanium according to ASTM-B367 Grade C-5 standards and perform precision grinding based on drawing DN330635C5/C9. Quality assurance requires either dye penetrant inspection or hydrostatic testing at 150 percent pressure for 30 minutes, with final delivery including full analysis reports. To be eligible for this project, the provider must maintain ISO-9001 certification and hold a Confidential security clearance. The opportunity is categorized under NAICS code 332710, with a response deadline set for November 20, 2026.

POSTED

about 7 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work involves the specialized packaging of repaired electronic assemblies, specifically requiring the use of anti-static shielding and cushioning in strict accordance with MIL-STD-2073 standards. The service provider is responsible for the secure delivery of Circuit Card Assemblies to Ship To W25G1U and the shipment of items to the DLA Distribution DDSD New Cumberland Facility. This requirement falls under NAICS code 488510, with a response deadline set for November 30, 2026.

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Electronic Component Supplier (Circuit Card Parts)This subcontract, titled Electronic Component Supplier (Circuit Card Parts), involves the procurement of capacitors, resistors, integrated circuits, and specialized hardware to support prime contractors on Navsup Weapon Systems Support Mech projects for the Department of Defense. The supplier is responsible for sourcing components that strictly adhere to original manufacturer specifications, specifically for NIIN 015547943, and must ensure all items are delivered directly to the designated repair facility. To maintain quality and security, the contractor must provide full traceability documentation and certifications of conformance to mitigate the risk of counterfeit parts. Additionally, all provided components must comply with the Buy American Act. This opportunity falls under NAICS code 423610, with a response deadline set for November 30, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Circuit Card Assembly Repair and ModificationThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the teardown, evaluation, repair, and modification of Circuit Card Assemblies. The primary objective is to restore these items to A condition in strict accordance with provided technical orders and drawings. To ensure quality and compliance, the contractor must maintain ISO 9001 certification and utilize ESD-safe workstations meeting MIL-STD-1686 standards. Additionally, all calibration equipment must be compliant with NCSL Z540 .3, and final products must adhere to MIL-STD-130 marking requirements. The response deadline for this opportunity is November 30, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 7 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and MarkingThis subcontract opportunity with the Department of Defense for Navsup Weapon Systems Support Mech involves providing specialized physical identification, marking, and packaging services for prime contractors. The selected provider must ensure all assets are identified according to MIL-STD-130, REV N and packaged in compliance with MIL-STD-2073, utilizing military-grade containers and anti-static bagging to deliver transport-ready assets. Qualified candidates must demonstrate proven experience in MIL-SPEC packaging. The solicitation was posted on October 21, 2026, with a response deadline of November 4, 2026, at 8:30 PM. The project falls under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

Computer Subassembly Replacement Parts SupplierThis subcontract opportunity with the Department of Defense, specifically for Navsup Weapon Systems Support Mech, seeks a supplier to provide electronic components, integrated circuits, and hardware necessary for the repair of Computer Subassembly NIIN 015451903. The selected provider must source parts from original equipment manufacturers or approved equivalents, ensuring all deliverables strictly adhere to original manufacturer specifications and are provided as certified replacement parts. To qualify, suppliers must provide proof of their status as an authorized distributor. This requirement falls under NAICS code 423610. Interested parties must submit their responses by the deadline of November 4, 2026, following the posting date of October 21, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Computer Subassembly Repair and OverhaulThis subcontract for the Department of Defense, specifically under Navsup Weapon Systems Support Mech, involves the technical repair, evaluation, and modification of Computer Subassembly NIIN 015451903. The selected contractor will be responsible for executing complete teardowns, failure analyses, and repairs in strict accordance with original manufacturer specifications, technical orders, and engineering drawings to deliver a fully functional unit. The project requires the use of specialized testing equipment and mandatory compliance with DFARS 252.204-7012 standards. This opportunity falls under NAICS code 811219, with a response deadline set for November 4, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS