Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Electronics Integration and Testing Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the integration and testing of battery management circuitry, sensors, and interface electronics within the MK11 assembly, requiring thorough diagnostics and calibration to ensure system reliability and performance. The work focuses on embedding and validating electronic components critical to battery operation, with an emphasis on functional accuracy, signal integrity, and compatibility within the existing hardware architecture. All activities must meet stringent military-grade standards for durability, safety, and operational readiness under varied environmental conditions. This subcontract is issued under the NAICS code 334511 for Electronic Component and Product Manufacturing by the Naval Surface Warfare Center, part of the Department of Defense, with performance expected to occur in a location identified by the zip code 32444. The solicitation was posted on August 3, 2026, and the work is intended for direct technical execution in support of defense systems requiring precision electronic subsystem integration. No set-aside provisions or award restrictions are specified, and the point of contact details are not provided.

General Info

Integrate and test military-grade battery electronics for Naval Surface Warfare Center in 32444.

Agency

Department Of Defense → Naval Surface Warfare Center

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

FL, 32444, USA

Set-Aside

NONE

Documents

This scope was carved out of N6133126C0002.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MK11 Battery Interface Assembly

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 3

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Surface Warfare Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Naval Surface Warfare Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Integration and testing of battery management circuitry, sensors, and interface electronics within the MK11 assembly, including diagnostics and calibration.

Similar Contracts

Same NAICS industry code

Solicitation # N0010427RZA06

Solicitation N0010427RZA06 is a presolicitation notice issued by the Department of Defense Navsup Weapon Systems Support Mech for the procurement of two sonar bow domes under NSN 2S-5845-014911342. The items are to be delivered to the Navsup Fleet Logistics Center Cheatham Annex in Williamsburg, Virginia. The government possesses full rights to the complete technical data package, meaning there are no engineering, tooling, or manufacturing restrictions, making this requirement a candidate for full and open competition. The procurement is categorized under NAICS code 334511 and is not currently utilizing FAR Part 12 commercial item policies, though interested parties may notify the contracting officer of commercial capabilities within 15 days of the notice. Responses are due by November 9, 2026. Primary coordination for this requirement is managed by Jeffrey A. Dietrich at the Mechanicsburg, Pennsylvania office.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

HOUSING SECTION, NIG

Solicitation # SPE4A727R0083

The Defense Logistics Agency is conducting market research through a sources sought notice to identify qualified parties capable of the new manufacture of the Housing Section, NIG, identified by NSN 5855-01-618-7805 and part number MPM-904-A4. The scope of work includes providing all labor, materials, facilities, and equipment necessary for the procurement of component parts, inspection, testing, preservation, packaging, and shipping. Estimated requirements are listed at quantities of 333 and 1,462 units. While Intelligent Manufacturing Solutions is currently the only approved source of supply, the government is seeking to determine if the requirement should be set aside for small businesses or pursued through full and open competition, with the possibility of multiple awards. The applicable NAICS code for this procurement is 334511. Interested organizations must submit their company details and tailored capability statements to Montana Kipp via email by October 26, 2026. The government will evaluate responses based on the organization's technical resources, financial capacity, and ability to implement a project management plan that addresses cost containment, tight schedules, and risk mitigation. There is no formal solicitation active at this time, and drawings or technical qualification requirements are currently unavailable.

POSTED

about 5 hours ago

DEADLINE

Mechanical De-reefer Device

Solicitation # W91CRB-27-Q-DEREEFER

The U.S. Army Contracting Command-Aberdeen Proving Ground is soliciting quotes for a commercial firm-fixed-price contract to procure forty new Mechanical De-reefer Devices. This procurement supports Foreign Military Sales to the Government of the Arab Republic of Egypt under Case EG-B-VRH. The acquisition is a total small business set-aside under NAICS code 334511. All provided equipment must be new, covered by a manufacturer warranty, and Berry Amendment compliant. Remanufactured or gray market items are strictly prohibited. Award will be based on the Lowest Priced Technically Acceptable approach, evaluating technical capabilities and past performance on an acceptable or unacceptable basis. Offerors must be actively registered in the System for Award Management and provide their Unique Entity Identification code with their submission. The vendor is not responsible for delivery but must prepare the shipment for pickup at a location within the continental United States and coordinate with a government-funded freight forwarder. Quotes are due by November 4, 2026, and must include a proposed delivery date and a side-by-side characteristic comparison if an alternate or equal product is offered.

POSTED

about 5 hours ago

DEADLINE

Battery Power Supply Fabrication and AssemblyThis subcontract involves the precision assembly and manufacturing of six Battery Power Supplies for prime contractors supporting DLA Distribution San Joaquin projects in Tracy, California. The fabrication process must strictly adhere to TDP Rev A Gen 1 and Drawing NR 13873 RE-200113759, with a mandatory requirement for an ESD-protected environment to ensure component integrity. Quality assurance is central to the contract, requiring compliance with ISO 9001:2015 standards and IUID marking per MIL-STD-130. All delivered units must undergo rigorous testing in accordance with MIL-STD-1916 or ASQ H1331. The project falls under NAICS code 334511, with a response deadline set for November 5, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 24 hours ago

DEADLINE

Manufacturing of Isolated Input DC/AC Converter ModulesThis subcontract involves the fabrication and assembly of 2,000 Isolated Input DC/AC Converter Modules, identified by NSN 5895-01-007-2798, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires the use of electronic assembly equipment and approved Additive Manufacturing processes in accordance with L31 guidelines to ensure all units meet strict DLA technical and quality requirements. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 334511. Interested parties must adhere to the timeline established by the Department of Defense, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supply of Indicator Lights (NSN 6210-01-212-5892)This subcontract involves the manufacture or sourcing of six indicator light components identified by NSN 6210-01-212-5892 for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider must possess a valid CAGE code and ensure all items strictly adhere to technical specifications. Performance takes place in Tracy, California, with strict adherence to MIL-STD-2073-1E for packaging and RP001 DLA Packaging Requirements for palletization. The solicitation was posted on October 25, 2026, with a response deadline of November 2, 2026, under NAICS code 334511.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Stator Assembly Supplier (NSN 6615-01-238-6768)This subcontract involves the manufacture or sourcing of 11 Stator Assemblies meeting NSN 6615-01-238-6768 specifications for prime contractors under the Defense Logistics Agency Weapons Support ASC Commodities Division. The supplier is responsible for ensuring all units are marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E and RP001. Performance of the contract will take place in New Cumberland. Strict adherence to cybersecurity and data protection standards is required, specifically compliance with NIST SP 800-171 and DFARS 252.204-7012. The opportunity falls under NAICS code 334511, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Supplier of Outlet Box, Alignment (NSN 6605-01-279-7291)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of seven Outlet Box, Alignment units identified by NSN 6605-01-279-7291. The selected supplier must ensure all components are produced according to the specified national stock number and undergo rigorous sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331, Table 1. Additionally, the contractor must comply with all disclosures regarding Covered Defense Telecommunications Equipment or Services. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334511, with the place of performance located in New Cumberland. Interested parties must submit their responses by the deadline of November 2, 2026. This contract serves to provide essential components to prime contractors supporting DLA Weapons Support projects.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Supply of Panel Lights (NSN 015229115)This subcontract involves the manufacture or procurement of 15 specialized panel lights under NSN 015229115 for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The selected provider must ensure all items meet strict DLA technical and quality requirements and adhere to DLAD standards. Performance will take place in New Cumberland, Pennsylvania, with items packaged and shipped via the First Destination Transportation program. The contract falls under NAICS code 334511 and requires a response by November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE7L4-27-T-0595

Solicitation SPE7L4-27-T-0595 is a federal procurement issued by the DLA Weapons Support LSO Combat Vehicles and Armament for 20 units of lens caps, identified by NSN 5855015846138. The requirement is not a small business set-aside and falls under NAICS code 334511. The procurement is managed under the First Destination Transportation program to utilize government-arranged transportation, with the delivery point and inspection/acceptance location set as the destination at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The need ship date is September 16, 2027, with an original required delivery date of October 20, 2027, and a delivery timeline of 314 days after order. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging and labeling must comply with MIL-STD-129, and palletization must follow RP001 requirements. Additionally, the use of class I ozone-depleting chemicals is prohibited. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity safeguarding under NIST SP 800-171, and prohibitions on certain telecommunications equipment.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 24 hours ago

DEADLINE

SIGHT GLASS, DETECTO

Solicitation # SPE7M1-27-T-1470

This fixed-price solicitation, number SPE7M1-27-T-1470, is issued by the Defense Logistics Agency for the procurement of one Detecto sight glass, identified by NSN 6665-01-089-4437. This is a Foreign Military Sales requirement for Bulgaria with a standard delivery window of 200 days after the award date. The contractor is also required to deliver one unit for first article testing within 90 calendar days of the contract date to Hill AFB, Utah. Evaluation of offers will include the government's first article testing cost, estimated at 1,000 dollars, which will be added to the offered price. The contract mandates strict quality and compliance standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and RP001, with specific marking requirements per MIL-STD-129 and MIL-STD-130. Additionally, the contract incorporates significant regulatory requirements, including CMMC Level 2 certification, ITAR and EAR export controls for technical data, and the Buy American Act. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

PAD, ELECTRODE, DEFIBRIL

Solicitation # SPE2DS-27-T-0926

Solicitation SPE2DS-27-T-0926 is for the procurement of eight adult electrode pads for the Automated External Defibrillator (AED) G3 PRO, identified by NSN 6515-01-613-1594 and manufacturer part number 9660-001 from Atlantic Diving Supply, Inc. These FDA-regulated devices are Type I Code M items with a non-extendable shelf life of 24 months. The contract requires delivery to Fort Campbell, Kentucky, within 20 days after receipt of the order, with FOB and inspection/acceptance points set at the destination. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 and RP001 for palletization, while ensuring all materials are marked according to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with FAR 52.246-2 for destination inspection. This is not a small business set-aside, and the offeror must certify compliance with the Buy American and Balance of Payments Program and representations regarding covered telecommunications equipment under FAR 52.204-24 and DFARS 252.204-7016.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Surface Warfare Center

Same awarding agency

Mensor Brand Hardware SupplierThis subcontract opportunity is for a supplier to provide authentic Mensor brand precision measurement equipment to prime contractors supporting the Naval Surface Warfare Center. The scope of work involves sourcing hardware based on specific government part numbers and ensuring all items are accompanied by traceable calibration certificates from an A2LA-accredited source. A critical requirement for this contract is that all provided items must maintain ISO 17025 accreditation. The project is designated as a total Small Business Set Aside under NAICS code 334517 and is managed by the Department of Defense. Performance for this contract will take place in Panama City Beach, Florida. Interested parties should note the response deadline of October 29, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

Small Business Set-Aside for for Mensor, LP Brand Sensors Per Attachments

Solicitation # N61331-27-Q-JK01

Solicitation N61331-27-Q-JK01 is a firm fixed price Small Business Set-Aside issued by the Naval Surface Warfare Center, Panama City Division, for the procurement of Mensor LP brand sensors. Quotes must be submitted via email to jamell.l.kilgore.civ@us.navy.mil by Thursday, October 29, 2026, at 11:00 AM Central Time. Submissions must be on company letterhead, include full OEM specifications, the vendor's CAGE code, and the lead time. If shipping is not included in the base price, it must be listed as a separate line item. Award will be based on the best value to the government, evaluating price, delivery, quality, and past performance via the Supplier Performance Risk System. Technical requirements specify that all hardware must include A2LA-Calibration certificates traceable and accredited according to ISO 17025, as well as Certificates of Conformance. Successful bidders must be capable of invoicing through the Wide Area Workflow system under NET 30 day terms. Deliveries to the receiving officer are restricted to Monday through Friday between 0900 and 1430 local time, with no deliveries accepted on federal holidays. The contract incorporates standard FAR and DFARS clauses, including requirements for the Buy American and Balance of Payments Program and safeguarding covered defense information.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 5 hours ago

DEADLINE

Small Business Set Aside for MK68 Spare and Repair Parts Fabrication IAW the attached NAVSEA Drawing, SOW, and ALL additional attachments. Request Access to drawings through SAM. Provide your Cage Code when requesting access in SAM.

Solicitation # N61331-27-Q-JC01

Solicitation N61331-27-Q-JC01 is a Small Business Set Aside issued by the Naval Surface Warfare Center Panama City Division for the fabrication and assembly of spare and repair parts for the MK68 System. The scope of work includes the production of six Bore Rod Gag Pin Lanyard Assemblies, four End Caps, six Housing Control Underwater Mine EX 1 MOD 0 Assemblies (including one Housing Adapter MK 157), and four MK 68 MOD 1 Thermal Battery Connector Assemblies. All fabrication must strictly adhere to provided NAVSEA technical drawings, and the contractor is required to provide all necessary personnel, facilities, and materials. Deliverables must be submitted to Panama City, Florida, within 180 days of the purchase order award. Award will be determined based on the best value to the government, evaluating price, delivery, quality, and past performance via the Supplier Performance Risk System. Required data deliverables include a Test/Inspection Report, a Certificate of Compliance, and Monthly Status Reports. Offerors must submit quotes by October 27, 2026, including their Cage Code and lead time, and must be capable of invoicing through Wide Area Workflow. Access to necessary technical drawings is managed through SAM. The effort is unclassified but requires strict adherence to Controlled Unclassified Information and Operations Security protocols.

POSTED

DEADLINE

in about 23 hours

Low-Range Force Frame Kit

Solicitation # N6426726R1010

Solicitation N6426726R1010 is a Request for Proposal issued by the Naval Surface Warfare Center, Corona Division, for a five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to procure Low-Range Force Frame Kits (FFK). The government requires a minimum of two and a maximum of forty-five kits to provide a standardized platform for calibrating handheld force gages, spring gages, and dynamometers across Navy fleet laboratories. The equipment must adhere to Calibration Standards Specification (CSS) 06-3228 and MIL-PRF-28800G Class 4 environmental standards. Key deliverables include the hardware, transit cases with specific identification plates and IUID bar-coding per MIL-STD-130N, COTS operator and service manuals (CDRL T001), and a repairable parts list (CDRL A001). The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis, evaluating the total price for the basic requirement and all options. Technical acceptability is determined by the offeror's ability to meet minimum specifications and a review of up to three past performance references from the last three years. Proposals must be submitted electronically via the PIEE Solicitation Module by November 2, 2026. Required submission documents include a completed Cross Reference Matrix in Excel, a statement of acceptance for delivery lead times of 120 calendar days, and a Small Business Subcontracting Plan for offerors other than small businesses.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Ergonomic Lab Furniture SupplierThis subcontract involves the supply of specialized ergonomic lab furniture to support prime contractors working on projects for the Naval Surface Warfare Center under the Department of Defense. The specific requirement is for one 40 inch black mobile ergonomic stand-up desk designed for CMM operators. The equipment must be delivered to the designated place of performance in Norco, California. This opportunity falls under NAICS code 423210, with a response deadline set for October 27, 2026.

Furniture Merchant Wholesalers

POSTED

DEADLINE

in about 7 hours

Precision Workstation and Monitor SupplierThis subcontract involves the supply of high-performance computing hardware to support prime contractors working on projects for the Naval Surface Warfare Center under the Department of Defense. The procurement includes three DELL Precision 5860XL Towers equipped with Windows 11 Pro, 64GB of RAM, and 1TB SSDs, along with one DELL P2418HT 24 inch touch screen monitor and USB 2.0 RS-232 serial adapters. The hardware is designated for delivery to Norco, California. This opportunity falls under NAICS code 423430 and was posted on October 15, 2026, with a response deadline of October 27, 2026.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

in about 7 hours

Mitutoyo Legex 9106 CMM System SupplierThis subcontract opportunity is for the procurement and delivery of a complete Mitutoyo Legex 9106 Coordinate Measuring Machine system to support prime contractors on Naval Surface Warfare Center projects. The required equipment includes the Legex 9106 Takumi Main Unit, an MPP-310Q High Accuracy Probe Head, and the MCOSMOS-3 CNC CMM software suite. To ensure all brand-name specifications are met, the supplier must be an authorized Mitutoyo reseller or the original equipment manufacturer. The selected provider will be responsible for delivering one fully configured system to Norco, California. This requirement falls under NAICS code 423830 and is managed under the Department of Defense. Interested parties must submit their responses by the deadline of October 27, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 7 hours

Mitutoyo Legex 9106 Coordinate Measuring Machine

Solicitation # N6426727Q4001

The Naval Surface Warfare Center, Corona Division, is conducting market research through a sources sought notice, solicitation number N6426727Q4001, to identify capable sources for the procurement of one Mitutoyo Legex 9106 Coordinate Measuring Machine. This is a brand name procurement based on specific precision and software compatibility requirements. The system must include the Legex 9106 Takumi Main Unit, an MPP-310Q High Accuracy Probe Head, a High-Precision Scanning Probe System F with MCOSMOS software and M3 Carbon Fiber Stylus Kit, MCOSMOS-3 CNC CMM with MiCAT Planner Off-line, and three DELL Precision 5860XL Towers, one of which must include a touchscreen monitor. Interested parties under NAICS code 334513 must submit a capability statement to Contract Specialist Julia Hunt by 5:00 PM PDT on October 26, 2026. The statement should include company identification, CAGE code, UEI number, business size, estimated unit pricing, lead time, and any industry commentary on the draft purchase description. The equipment will be delivered to the Naval Surface Warfare Center in Norco, California, with a required delivery date as soon as possible after the award. This notice is for informational purposes to determine the appropriate acquisition method and does not constitute a formal solicitation or commitment to award a contract.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

in about 7 hours

MIW and SMCM Engineering Support - SEAPORT

Solicitation # N6133127R0004

Solicitation N6133127R0004 is a small business set-aside issued by the Naval Surface Warfare Center under the Department of Defense. The contract seeks engineering support for Mine Warfare and Surface Mine Countermeasures, specifically requiring a Design Agent, Technical Direction Agent, In-Service Engineering Agent, and Foreign Military Sales support. This opportunity is restricted exclusively to SEAPORT MAC holders and falls under NAICS code 541330. The solicitation was posted on October 8, 2026, and requires responses to be submitted by 1500 CST on November 10, 2026. Managed out of Panama City Beach, Florida, the procurement process is overseen by primary point of contact AnnaBelle Tiller and secondary contact Cara Murray.

Engineering Services

POSTED

DEADLINE

Logistics and Shipment of AssembliesThe contract specifies the logistics, packaging, labeling, and delivery of completed MK11 Battery Interface Assemblies from TBE to the Naval Surface Warfare Center at Panama City Beach, Florida, with a zip code of 32444. The work involves ensuring proper handling and transportation of sensitive military equipment in compliance with all applicable military and federal standards for packaging and labeling to guarantee safe and secure transit. The contract is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for local and long-distance freight services, indicating that the primary focus is on the movement and logistics management of the assemblies. The project is issued under the Department of Defense, with performance centered at the NSWC Panama City Beach facility, and the solicitation was posted on August 3, 2026, signaling an upcoming procurement timeline that will require timely execution to meet operational readiness requirements.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Technical Data Package (TDP) and CUI Compliance SupportThe contract supports the management, documentation, formatting, and safeguarding of technical drawings, test reports, and manufacturing records in compliance with Controlled Unclassified Information protocols. It focuses on ensuring that all technical data packages are accurately organized, properly labeled, and protected according to federal CUI standards to maintain integrity and security throughout the lifecycle of defense-related documentation. The work is structured to uphold stringent requirements for handling sensitive but unclassified technical information within the Department of Defense ecosystem. This subcontract, issued by the Naval Surface Warfare Center under NAICS code 541330, requires performance at a location with zip code 32444. The contract emphasizes strict adherence to regulatory frameworks governing the storage, transmission, and archival of technical records, with an emphasis on precision in formatting and rigorous control measures to prevent unauthorized access or data exposure. No set-aside designation is specified, and the effort serves to reinforce the Department of Defense’s operational security posture through consistent compliance and expert handling of technical data.

Engineering Services

POSTED

DEADLINE

Precision Fabrication of Battery Interface Assembly ComponentsThe contract pertains to the precision fabrication of custom metal components intended for the MK11 Battery Interface Assembly, including housings, brackets, and internal structural parts. These parts must meet exacting engineering specifications to ensure functional integrity and compatibility within the assembly, supporting the operational requirements of naval systems. The work is classified as a subcontract under NAICS code 332510, which designates it within the metal forging and stamping industry, indicating the need for advanced manufacturing capabilities and quality control standards. Performance of the contract is to occur at a location with a zip code of 32444, associated with the Naval Surface Warfare Center under the Department of Defense. Although the solicitation number and point of contact are not provided, the contract was posted on August 3, 2026, and is positioned as a subcontract within the broader defense supply chain. No set-aside designation or organizational type is specified, suggesting the opportunity is open to qualified prime contractors or subcontractors with demonstrated expertise in high-precision metal fabrication for defense applications.

Hardware Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS