Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Emergency and Safety Lighting Supply (Brand-Specific Manufacturing)

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of emergency and safety lighting units manufactured by Julian A. McDermott Corp. or approved equivalent products that meet stringent compliance standards set by the Port Authority of New York and New Jersey, including ENERGY STAR certification and environmental regulations. All lighting units must adhere to specific technical and performance criteria outlined by the Port Authority to ensure reliability and efficiency in critical safety applications. The solicitation is structured as a subcontract and is open for responses until July 31, 2026, with proposals required to demonstrate full alignment with the mandated specifications and manufacturing sources. The work falls under NAICS code 335132, which pertains to lighting fixture manufacturing, and the performance location is tied to the New York office of the Port Authority, though exact delivery addresses are not specified. This procurement emphasizes quality control, regulatory compliance, and the use of approved manufacturers to maintain consistency across safety infrastructure systems.

General Info

Supply of compliant emergency safety lighting units by approved manufacturers for Port Authority until July 2026.

Agency

New York → Port Authority Of Ny & NjView Agency

NAICS

335132 - Commercial, Industrial, and Institutional Electric Lighting Fixture ManufacturingView NAICS

Place of Performance

NY, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNew York → Port Authority Of Ny & Nj
ContactsNo contacts available
OfficeN/A
Organization / Agency
New York → Port Authority Of Ny & Nj
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of emergency and safety lighting units manufactured by Julian A. McDermott Corp. or approved equivalents, compliant with Port Authority specifications, ENERGY STAR, and environmental standards.

Similar Contracts

Same NAICS industry code

NAICS: 335132
New
SLED
Bid # 6000003394 - Supply and Deliver Emergency and Safety Lighting as Manufactured By Julian A. McDermott Corp. to Various Warehouses in NY and NJ - Two (2) Year Requirements ContractThe Port Authority of New York and New Jersey has issued a two-year requirements contract under Bid #6000003394 for the supply and delivery of emergency and safety lighting manufactured by Julian A. McDermott Corp. to multiple warehouses located across New York and New Jersey. This contract obligates the vendor to fulfill all emergency and safety lighting needs for the duration of the term, ensuring continuous availability and timely delivery to designated facilities without interruption. The solicitation was posted on July 17, 2026, with responses due by July 31, 2026, and all deliveries must meet the specified manufacturing standards and performance criteria set by the Port Authority. All shipments are to be directed to various warehouse sites within the New York and New Jersey region, with no single point of delivery specified; the vendor must be prepared to coordinate logistics across multiple locations. Procurement Operations, reachable at bids@panynj.gov, serves as the primary point of contact for questions and documentation related to the bid. The contract does not specify a set aside type or NAICS code, indicating it is open to all qualified suppliers without restriction. Participation requires submission through the designated online portal accessible via the provided UI link.
Port Authority Of Ny & Nj

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 335132
New
Federal
Commercial Lighting Fixture SupplyThe contract entails the procurement and delivery of commercial off-the-shelf lighting fixtures that meet federal procurement standards, with strict adherence to the Buy American Act requiring domestic content in all components and manufacturing processes. The fixtures must be fully compliant with applicable federal specifications and capable of deployment at the designated place of performance in Curtis Bay, Maryland, 21226. This is a subcontract under the Department of Homeland Security’s Sflc Procurement Branch 1, identified by NAICS code 335132 for lighting fixture manufacturing, and is categorized as a subcontract without a specific set-aside designation. The opportunity was posted on July 17, 2026, with a firm response deadline of July 23, 2026, at 2:00 PM, requiring all submissions to be completed within this window to be considered. All offerors must ensure that the lighting fixtures are sourced, assembled, and tested in the United States in full compliance with Buy American Act requirements, and must provide documentation to verify domestic content percentages. The contract is not open to foreign manufacturers or suppliers who cannot meet these domestic sourcing thresholds. Delivery timelines, quality assurance protocols, and testing procedures will be subject to federal contract compliance standards, and any deviation from domestic content mandates will result in disqualification. Bidders are expected to align their proposals with the operational needs of the Department of Homeland Security and must be prepared to furnish technical certifications and supply chain transparency upon request.
Sflc Procurement Branch 1(00080)

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 335132
New
Federal
FIXTURE, LIGHTINGThe United States Coast Guard Surface Forces Logistics Center is soliciting quotations for four specific lighting fixtures exclusively manufactured by PAULUHN ELECTRIC MFG. CO. INC., each identified by unique NSNs and OEM part numbers: FPS2L-G2 (50 units), FPS2L EMT2 (25 units), FLC2L (25 units), and FLC2L RV-1 EMT2 (100 units). These fixtures are critical for onboard lighting systems on 154 WPC vessels and 154 FAST Response Cutters, with technical specifications including 24-inch LED fixtures producing 3520 lumens, white or 4000K color temperature, non-metallic housings, feed-through cable glands, and vapor-tight designs. All items must be sourced as brand-name products with no substitutions accepted unless deemed equivalent by the Coast Guard based on salient physical, functional, or performance characteristics. Delivery is required F.O.B. Destination to the USCG Surface Forces Logistics Center in Baltimore, MD, and the entire order must be submitted in a single shipment. Packaging must strictly comply with MIL-STD-2073-1E Method 10 using ASTM-D5118 single-wall fiberboard boxes, with marking conforming to MIL-STD-129R and barcoding following ISO/IEC-16388-2007 using Code 39 symbology. Failure to meet packaging, packing, and marking requirements will result in rejection and return of goods, delaying payment. The solicitation is issued as a combined synopsis/solicitation under FAR Subpart 12.6 with a NAICS code of 335132 and a small business size standard of 700 employees, with awards made on a lowest price technically acceptable basis using simplified acquisition procedures. All offerors must be registered in SAM.gov, possess a valid DUNS number and Tax Identification Number, and submit a completed FAR 52.212-3 with Alternate I. The contract is a firm fixed price, and the government will evaluate compliance based on adherence to specifications and regulatory clauses including FAR 52.209-10 on inverted domestic corporations, FAR 52.225-1 and 52.225-3 under the Buy American Act, and FAR 52.219-6 designating the acquisition as a total small business set
Sflc Procurement Branch 1(00080)

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 335132
New
DIBBS
CAPSULE, CONTROL REPThe contract solicitation SPE4A6-26-T-07BF seeks the procurement of 12 units of CAPSULE, CONTROL REPLACEMENT with a delivery requirement of 262 days after award, targeting a final delivery date of April 13, 2027, to DLA Distribution San Diego, California. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I identifiers, and must be strictly adhered to. The item is subject to stringent packaging and marking standards under MIL-STD-2073-1E and MIL-STD-129, which mandate cleaning and drying only without preservation material, prohibition of mercury compounds, and application of the “01-01 Fragile” label. Packaging must use the D3 unit container code and E5 inner packaging code. Item Unique Identification is not required, and barcoding must comply with MIL-STD-129 using formats such as Data Matrix or USS Code 128. The item is classified as controlled technical data under ITAR or EAR, and access is restricted to contractors with JCP certification, completion of DLA export control training, and DLA approval. Export disclosures are governed by DFARS 252.225-7048. Inspection and acceptance occur at the destination point, with quality verification conducted under MIL-STD-1916 or a comparable zero-based sampling plan, assigning verification levels VII, IV, and II for critical, major, and minor attributes with corresponding AQLs of 0.1, 1.0, and 4.0. Sampling may also utilize MIL-STD-105/ASQ Z1.4 with zero non-conformances required unless otherwise specified. The contract includes comprehensive cybersecurity and defense information safeguarding requirements under DFARS 252.204-7012 and NIST SP 800-171, with CMMC Level 2 certification applicable for third-party assessors. Hexavalent chromium is prohibited, and hazardous materials must be labeled in accordance with 29 CFR 1910.1200, requiring submission of Safety Data Sheets prior to award. Electronic invoicing through WAWF is mandatory, and all contractors must comply with employment eligibility, anti-trafficking, sustainable procurement, and equal opportunity clauses. The solicitation is issued under NAICS 335
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 335132
New
DIBBS
LIGHT EMITTING DIODThe contract pertains to the procurement of a single light-emitting diode identified by NSN 5980-01-629-9076 and part number LV2000-B, with a required delivery of one unit within 20 days from the contract award date. Delivery is to be made FOB origin, with inspection and acceptance occurring at the destination. The item must comply with DLA Packaging Requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking required. Packaging must follow specified methods including preservative type 31, dry conditioning, and use of standard unit containers. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the item except for specific functional applications such as batteries or sensors as defined by NAVSEA, and portable devices containing mercury must include a secondary containment system. The product is subject to federal acquisition regulations and must be shipped via traceable freight, not parcel post, to the designated military delivery point at Camp Pendleton, California. The contract is issued under solicitation SPE7M5-26-T-330G and aligns with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with compliance determined by the revision in effect on the solicitation issue date. The procurement is for government use only, with assigned identifiers for project tracking, distribution, and financial control, and the original required delivery date is set for July 17, 2026.
ACTIVE DEVICES DIVISION

POSTED

4 days ago

DEADLINE

in 9 days
View Details

More opportunities from New York → Port Authority Of Ny & Nj

Same awarding agency

NAICS: 322291
New
SLED
Sustainable Packaging and Product Labeling ServicesThe contract calls for the provision of eco-friendly packaging solutions specifically designed for lighting products, requiring all materials to be derived from recycled sources and explicitly excluding PVC and polystyrene. Packaging must comply with the Port Authority of New York and New Jersey’s sustainability standards, which include accurate and compliant labeling to ensure proper identification and environmental adherence. The work is scoped as a subcontract under NAICS code 322291, indicating a focus on other paper product manufacturing, and is intended to support environmentally responsible practices within the Port Authority’s supply chain. All deliverables must meet strict sustainability criteria to align with agency-wide environmental goals. The solicitation was posted on July 17, 2026, with a response deadline of July 31, 2026, and is managed by the New York branch of the Port Authority. While specific location details for performance or contact information are not provided, the opportunity is open through the Port Authority’s BonfireHub platform, requiring potential bidders to submit proposals via the designated online portal. There is no set-aside status designated for small, minority-owned, or other disadvantaged businesses, making the opportunity open to all qualified subcontractors who can meet the technical and environmental requirements outlined in the scope of work.
Sanitary Paper Product Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
New
SLED
Bid # 6000003384 - Supply and Deliver One (1) Gibraltar G-5500 24-Foot Crash Rated Slide Gate to Newark Liberty International AirportThe Port Authority of New York and New Jersey is soliciting bids for the supply and delivery of one Gibraltar G-5500 24-foot crash-rated slide gate to be installed at EWR Gate 1, Newark Liberty International Airport, with performance required at the designated construction site located at 1 Conrad Rd, Newark, NJ 07114. Bids are due by July 31, 2026, and must be submitted exclusively through the Bonfire procurement portal; no hand-delivered or mailed proposals will be accepted. The contract is structured as a request for quotation and is expected to be awarded on a fixed-price basis, though the specific contract type and total value are not disclosed due to the absence of unit pricing or cost data in the submission. The contractor must provide all materials, equipment, packaging, freight, and delivery to the site, and must also accommodate up to ten estimated qualified manufacturer representative site visits for inspection, testing, and commissioning support. Delivery must be escorted airside, with prior notification required before arrival, and all work is subject to performance commencement within five days of notice. The contractor is bound by a comprehensive set of administrative, operational, and security requirements, including mandatory compliance with Port Authority Facility Rules, non-discrimination, environmental regulations, and strict adherence to OSHA, EPA, and other federal and state laws. All personnel accessing secure areas must undergo thorough background checks, including criminal history, terrorist watchlist screening, and biometric identification, and must present two forms of government-issued ID and an original Social Security card. Personnel must be verified as legally authorized to work in the U.S., communicate in English, wear approved uniforms with issued photo badges, and be replaceable within 24 hours if performance is unsatisfactory. The contractor must submit all records, data, and documentation produced under the contract as the exclusive property of the Port Authority, maintain confidentiality of protected information, and comply with the Port Authority’s Information Security Handbook. Security and access controls prohibit unauthorized photography, video recording, or sketching on-site without written approval. The contractor is fully responsible for indemnification, liability, insurance, and compliance with sustainability guidelines, including best efforts to use sustainable packaging, though specific packaging, preservation, labeling, or bar-coding standards are not detailed. Subcontracting requires prior written approval and the contractor retains full liability for subcontractor actions. The Port Authority retains termination rights for convenience or default, audit rights to all records without cost, and the authority to enforce compliance with

POSTED

2 days ago

DEADLINE

in 12 days
View Details