Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Emergency Escape Breathing Devices (EEBDs) Supply – Ocenco M-20.3 or Equal

Active

Federal

Response Deadline08/10/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Homeland Security → Base MIAMI(00028)View Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

Key West, FL, 33040, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 07:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Base MIAMI(00028)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Base MIAMI(00028)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 32 Emergency Escape Breathing Devices (EEBDs), either the Ocenco M-20.3 model or a technically equivalent alternative meeting NIOSH standards and salient physical/functional characteristics.

Similar Contracts

Same NAICS industry code

STRETCHER, PATIENTThe contract specifies the procurement of a Rapid Extraction Patient Stretcher, low profile, in O.D. Green, designed for swift and safe patient extraction in battlefield and high-risk environments. The system includes the stretcher body with part number SK-RESLP01-GR, a Cordura backpack (SK-RES02-CB), a pair of horizontal lift slings (SK-RES03-GR), a Sked tow strap (SK-204), and a steel locking D-carabiner (SK-206-B). Manufactured by Panakeia, LLC (CAGE 6A4F9), the item is classified as a Class I medical device by the FDA, requiring compliance with registration, listing, labeling, and GMP standards despite not needing a 510(k) premarket notification. All components must be marked per the latest Medical Marking Standard No. 1 and packed according to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging requirements. The NSN is 6530-01-723-3554, and the unit of issue is EA. Delivery is required within 20 days to Fort Bragg, North Carolina, FOB destination, with zero tolerance for quantity variance. The item is subject to federal medical device regulations, and the contracting officer must submit an EBS referral for FDA confirmation. The contract is issued under solicitation SPE2DH-26-T-5527, with a response deadline of August 3, 2026, and the original required delivery date is July 28, 2026. Freight must be shipped via traceable means, excluding parcel post, with detailed labeling and shipment controls applied.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 24 hours ago

DEADLINE

GLOVE, NITRILEThe contract is for the procurement of 12 boxes of nitrile patient examination gloves, each box containing 90 gloves, with specifications requiring the gloves to be textured for enhanced wet and dry gripping, longer and thicker than standard exam gloves, form-fitting with an extended beaded cuff, ambidextrous, non-sterile, disposable, latex-free, powder-free, and sand-colored in size X-large. The item is identified by NSN 8415-01-600-6052 and delivered FOB destination to a specified address in Boise, Idaho, with a strict delivery requirement of 20 days after award. Packaging must comply with DLA Packaging Requirements for Procurement (RP001), ASTM D3951 for non-hazardous materials, and MIL-STD-129 or Medical Marking Standard No. 1 for medical items, including mandatory barcoding and labeling per government standards. The gloves are non-hazardous and do not require hazardous material packaging controls under FED-STD-313 or TQ IP025. Invoicing and payment processing are exclusively through Wide Area WorkFlow (WAWF), and acceptance of goods occurs at the delivery point by government representatives under FAR 52.246-2. The solicitation, issued by the Department of Defense’s Medical Supply Chain, requires offerors to provide their Unique Entity ID and CAGE code and to certify their small business status and compliance with socioeconomic programs. All contractors must adhere to stringent cybersecurity requirements under DFARS 252.204-7012, including safeguarding covered defense information and reporting cyber incidents, as well as prohibitions on using equipment or services from designated foreign telecommunications vendors. Compliance with whistleblower protections, restrictions on compensation of former DoD officials, and requirements for hazard communication labeling are mandatory. The contract incorporates numerous FAR and DFARS clauses including those related to trafficking in persons, employment eligibility, sustainable products, hazardous material identification, and subcontracts for commercial services. No unit prices or contract value are provided in the solicitation, and award will be based on the lowest price technically acceptable response. All submissions must be made electronically via the DIBBS portal by the closing date of July 30, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

SPONGE, SURGICALThe contract solicitation SPE2DS-26-T-251W is for the procurement of surgical sponges designated as a medical device by the FDA, with each sponge measuring 4 inches by 4 inches and packaged in precut envelopes—25 per box, with 600 boxes total as the unit of issue. The sponges are intended for use around drains, catheters, intravenous infusions, hyperalimentation, and dialysis procedures. Delivery must be completed within five days of order placement under FOB Destination terms, with inspection and acceptance occurring at the point of delivery. The packaging and marking must strictly adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and preservation and packing must comply with MIL-STD-2073-1E. All materials must be marked in accordance with DLA’s MMS No. 1, and commercial packaging standards must be followed without reliance on military specifications except where explicitly required. The contract is a total small business set-aside under NAICS code 339113, with automated award likely based on Lowest Price Technically Acceptable methodology. Pricing is not specified in the document, rendering the total contract value indeterminate. Contractors must be registered in SAM, possess a Unique Entity ID, and comply with cybersecurity requirements under FAR 52.204-21 and 52.240-93 for safeguarding covered defense information. Subcontracting plans are required under FAR 52.244-6, and accelerated payments to small business subcontractors are mandated. Invoicing must be submitted via Wide Area WorkFlow (WAWF), and all shipments must be properly labeled and documented in compliance with federal hazardous materials regulations and DLA logistics directives. The contracting office is located at DLA Troop Support in Philadelphia, PA, with Tiffany Parker listed as the primary point of contact. All responses must be submitted electronically via the DIBBS portal by the solicitation close date, and no physical submissions are permitted.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

FUNNEL, COMMON, LABORATOThe contract is for the procurement of two plastic laboratory funnels, each 58mm in size, specifically designated for use with Taylor phosphate and nitrate test kits. The item is identified by NSN 6640-00-165-5851 and is to be delivered within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. The solicitation, numbered SPE2DS-26-T-275U, was posted on July 27, 2026, with responses due by August 3, 2026. It falls under NAICS code 339113 and is managed by the Department of Defense's Medical Supply Chain MD Surg FSF office. Delivery is to a military postal address with zip 96662, and primary point of contact is Olusola Emmanuel, reachable via email and phone provided.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

BAG, OXYGEN MANAGEMENTThe oxygen management bag is constructed from 1000 denier nylon with full high-density foam padding to safeguard the oxygen cylinder and regulator during transport. It features three closeable interior pockets for storing accessories, elastic airway loops for secure attachment, a 2-inch wide carrying handle, and a vinyl-coated bottom for durability and easy cleaning. The bag includes a rifle sling-style strap, reinforced steel rings and hooks for secure mounting, and reflective trim on both sides for enhanced visibility in low-light conditions. Weighing two pounds and measuring 9.5 inches diagonally by 21 inches in length, it is designed for portability and rugged use. The item is identified by NSN 6530-01-692-9797 and is being procured in a quantity of one unit under Purchase Request 7017623669 with a delivery deadline of 20 days ADO. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards and government identification must be removed from rejected supplies. The solicitation, issued under SPE2DH-26-T-5535 on July 27, 2026, with a response deadline of August 3, 2026, is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance centered in Norfolk, Virginia, and point of contact Tina Vu at tina.vu@dla.mil.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 24 hours ago

DEADLINE

APPLICATOR, DISPOSABLEThe contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and supplied in units of 2 per packet with 100 packets per unit of issue, totaling 200 applicators. The item must comply with commercial packaging standards as mandated by DLA Packaging Requirements, with each unit sealed in a protective container to prevent damage and each shipping container designed for safe transport at the lowest cost to the delivery point. All items must adhere to Medical Marking Standard No. 1, replacing references to MIL-STD-129, with labeling and documentation required per this standard. The product is regulated by the FDA, and bidders must explicitly state the manufacturer, company, and part number—approved suppliers include REDI Products Inc. (P/N 36737), Medline Industries Inc. (P/N MDS202000Z), and McKesson Medical-Surgical Inc. (P/N 36767). Mercury or mercury-containing compounds are strictly prohibited in the product or its contact surfaces, with limited exceptions for specific functional components governed by NAVSEA standards. The item must be delivered FOB destination within 20 days with zero variance allowed in quantity, inspected and accepted at the delivery point under MIL-STD-2073-1E packaging guidelines. The NSN is 6515-00-564-8242, and the solicitation is issued under SPE2DS-26-T-273F with a response deadline of August 3, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

ADHESIVE TAPE, SURGICALSurgical adhesive tape measuring 540 inches by 1.5 inches, known as Leukotape P, is a pressure-sensitive product with adhesive on one side and exceptionally high tensile strength, specifically intended for use in treating patellofemoral pain. The item is packaged in units of twelve tapes per package, with a mandatory shelf life of sixty months from the date of manufacture, and no more than nine months may have elapsed between the manufacturer’s date and delivery to the government. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and include clear markings for the date of manufacture, expiration or retest date, contract number, and lot number. Each unit must be sealed in a protective container to prevent damage or breakage, and shipped in commercial exterior containers suitable for safe transport via common carrier at the lowest possible rate to the designated delivery point in San Antonio, Texas. The product is identified by NSN 6510-01-321-7747, with a required quantity of three packages and a delivery deadline of five days after award. Bidders must specify the source and part number being offered, and all submissions must adhere to the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements. The solicitation, issued under contract number SPE2DS-26-T-273L, has a response deadline of August 3, 2026, and is managed by the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

NEEDLE, HYPODERMICThe item is a hypodermic needle specifically designed for pneumothorax drainage, sized at 10 gauge and 3.25 inches in length, with a unit of issue of each. It is identified by the NSN 6515-01-673-1701 and requires a shelf life of 48 months, which is non-extendable and governed by RS001 for TYPE I items. The procurement is subject to the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date, depending on acquisition size. Packaging must adhere to DLA standards, and all government identification must be removed from non-accepted supplies. The bid solicitation number is SPE2DS-26-T-276P, posted on July 27, 2026, with responses due by August 3, 2026. The required quantity is two units, to be delivered within 20 days after award to Fort Bragg, North Carolina. The contracting activity falls under the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, with Allen Costello listed as the primary point of contact. The NAICS code 339113 applies, confirming the product’s classification within medical device manufacturing.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

SAMPLING KIT, CHEMICThe contract solicitates two units of a Chemical Sampling Kit (NSN 6665-01-509-4866) for delivery to Joint Base Lewis McChord, Washington, within five days after order placement. The kit is designed for high-efficiency field sampling of potentially toxic and forensic environmental samples and includes sterile water, hyper wipes, M256 pouch, and RSDL pouch, all of which must be cleaned, tested, and certified free of interferences. Each kit must be individually packaged in accordance with MIL-STD-2073-1 Appendix D, using Method of Preservation 31 to protect the most critical component, and must comply with RP001 DLA packaging requirements. Packaging must include a parts list and assembly instructions inside the container, with markings conforming to MIL-STD-129, including special Code ZZ requirements such as “Arrow Up,” “Type I, Shelf-Life,” and “Open This Side.” The product must have a shelf life of nine months, with no more than one month elapsed from manufacture to delivery, and labels must clearly identify the NSN, manufacturer, CAGE code, manufacture date, expiration or retest date, and contract/lot number. Bidders must specify the source and part number being supplied. The contract incorporates numerous FAR and DFARS clauses related to employment equity, trafficking in persons, hazardous materials, sustainable products, cybersecurity, and employment eligibility verification, all under Deviation 2026-00038 except where otherwise noted. Payment must be processed electronically through the Wide Area WorkFlow system, requiring both an invoice and receiving report unless an exception applies. Inspection and acceptance occur at destination per FAR 52.246-2, with quality controls tied to the DLA Master List of Technical and Quality Requirements identified by R and I numbers, including RQ011 for removal of government identification from non-accepted supplies and RQ035 for potential battery content. Contractors must comply with DFARS 252.223-7001 for hazardous material labeling under OSHA’s Hazard Communication Standard and must submit hazard warning labels and safety data sheets for non-listed materials before award. All offerors must maintain current SAM registration and provide representations regarding small business status, covered telecommunications equipment, and joint venture eligibility. The solicitation, issued on July 15, 2026, with a response deadline of July 27, 2

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

DRESSING, OCCLUSIVE, ADHThe contract specifies the procurement of TEGADERM Transparent Dressing, an occlusive adhesive dressing designed for use on peripheral and central IV catheters or as a wound dressing. Each unit is individually packaged, sterile, and measures 2.375 inches in width by 2.750 inches in length, with a unit of issue consisting of 100 dressings per package. The product must have a 36-month shelf life, with no more than five months elapsed from the manufacturer’s date to the date of delivery to the government. Shelf-life markings must comply with the latest revision of Medical Marking Standard No. 1, and all labels must include the date of manufacture, expiration or retest date, contract number, and lot number. Packaging must meet commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers suitable for safe delivery at the lowest freight rate to Fort Bragg, North Carolina. All items must be marked in accordance with MMS No. 1, which supersedes MIL-STD-129, and must be sourced with clear identification of part number and supplier. The NSN is 6510-01-234-8943, with a single package quantity required for delivery within 20 days of award under solicitation SPE2DS-26-T-274S, issued on July 27, 2026, with bids due by August 3, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, and RD003 applies as the item is potentially covered under Defense Information.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

TUBE, TRACHEALThe contract specifies the procurement of two tracheal tubes, each measuring 7.0mm in internal diameter, featuring a Murphy eye, a cuffed design, and a hollow round tip, constructed from plastic and supplied in sterile condition with an integrated stylette. Each unit is designated as a single item for delivery, with a mandatory shelf life of 60 months from manufacture, and no more than nine months may have elapsed between the date of manufacture and the date of delivery to the government. Compliance with DLA packaging requirements and technical specifications outlined in the DLA Master List of Technical and Quality Requirements is enforced, with the applicable revision controlled by the solicitation issue date. The product is identified by NSN 6515-01-654-7664, and bidders must clearly state the source and part number being offered. Delivery is required within five days of award, with performance to be fulfilled at Williamsburg, Virginia, under solicitation SPE2DS-26-T-275M. The contract falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain, with Chandler Alvarez listed as the primary point of contact for inquiries and submissions.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 24 hours ago

DEADLINE

SEALING COMPOUNDThe contract pertains to the procurement of a black sealing compound with part number PR-2201 B1 and NSN 8030-01-511-1245, supplied in 2.5 fluid ounce units, with a total requirement of 20 kilotons divided into two line items of 5 and 15 kilotons respectively. The item is classified as a Type 2 shelf life item with a six-month shelf life that is extendable, and must be stored below 80 degrees Fahrenheit. Packaging and labeling must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 33 indicating Type II shelf life, and all hazardous material shipping requirements under IP025. The product is subject to the revised Hazard Communication Standard, requiring submission of Safety Data Sheets and compliant labels per 29 C.F.R. 1910.1200 prior to award, along with employee training on these requirements. Delivery is FOB destination with zero variance allowed, inspection and acceptance occurring at the destination. Shipment must be made via traceable means, prohibiting parcel post, and addressed to HMX-1 Supply at Quantico, Virginia. The original required delivery date is July 28, 2026, with a 20-day delivery window. The contract is issued under SPE8ES-26-T-2448 and incorporates all technical and quality requirements referenced in the DLA Master List, with full compliance mandated for packaging, marking, and shipping as outlined in DLA-specific guidelines.

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Base MIAMI(00028)

Same awarding agency

Small Business Prime Contractor Coordination and Proposal Support

Offices of Certified Public Accountants

POSTED

DEADLINE

Commercial Item Packaging, Preservation, and Marking (Military Standards Compliance)

Packaging and Labeling Services

POSTED

DEADLINE

Technical Equivalency Documentation and Compliance Support

Testing Laboratories and Services

POSTED

DEADLINE

Emergency Escape Breathing Device (EEBD) for CGC Charles DavidThe United States Coast Guard is soliciting quotes for 32 Emergency Escape Breathing Devices (EEBDs), specifically the Ocenco M-20.3 model or an equally compliant alternative, under a total small business set-aside. The requirement is for commercial items procured under a brand name or equal solicitation, where any alternative product must provide detailed technical documentation proving it meets NIOSH standards and matches the salient physical and functional characteristics of the Ocenco M-20.3. Delivery is required FOB Destination to the CGC Charles David at 100 Trumbo Rd, Key West, FL, within 90 days after receipt of order, and payment will be processed net 30 days after invoice approval. Quotes must include full pricing, estimated delivery timeline, company UEI, CAGE code, and Tax ID, along with supporting technical data if proposing a non-Ocenco product. The award will be made on a Lowest Price Technically Acceptable basis, prioritizing compliance with technical requirements before cost. The solicitation is closed to small businesses only under NAICS code 339113, with responses due by August 10, 2026. Primary and secondary points of contact are provided for inquiries, and all submissions must adhere strictly to the outlined criteria without a traditional written solicitation being issued.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Mold remediation/HVAC services at Coast Guard Sector Key West UPHThis solicitation, numbered 70Z028-26-Q-0000057, is a combined synopsis and solicitation for a firm fixed price construction contract under simplified acquisition procedures, exclusively set aside for small businesses under NAICS code 238220 with a size standard of $19.0 million. The requirement is for HVAC improvements and maintenance services at the USCG Sector Key West Barracks facility located at 100 Trumbo Road, Key West, Florida, including cleaning forty-four fan coil units, replacing four roof exhaust fans, converting forty-two units from plenum to ducted return configuration, modifying three dedicated outdoor air systems, and conducting third-party mold testing with documented results. Work must be completed within thirty calendar days of notice to proceed, with a strict work schedule limited to weekdays from 8 a.m. to 3 p.m., and no work allowed on weekends or holidays. The contract will be awarded using the lowest price, technically acceptable method, with an anticipated award date ten business days after the solicitation close, now revised to August 7, 2026 following two amendments that first extended the deadline to July 31, 2026 to allow for site visits and then to August 7, 2026. Offers must be submitted via email to Jerry.Lopez@uscg.mil by 3 p.m. EST on the due date, and telephone inquiries are not accepted. All offerors must be actively registered in the System for Award Management with their UEI and tax ID on file, and must have the correct NAICS code listed in their SAM profile. The solicitation requires a site visit to be coordinated with point of contacts Lieutenant Brett Foster or Chief Warrant Officer Amanda Green, and all attendees must present government-issued photo identification. Mandatory FAR clauses include those on differing site conditions, site investigation, inspection of construction, suspension of work, anti-kickback, covenant against contingent fees, and personal identity verification, among others. Additionally, the contract incorporates HSAR provisions prohibiting contracts with corporate expatriates and designating a Contracting Officer’s Technical Representative. Contractors must comply with Buy American requirements, the prohibition on trafficking in persons, and must ensure all employees requiring facility or CUI access have undergone favorable background investigations. Final acceptance requires submission of all warranties, inspection records, photographic documentation, and successful participation in a government-lead final walkthrough, with deficiencies corrected to the contracting authority’s satisfaction.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Repair/Replace Security Systems at Sector Key WestThis contract is a small business set-aside for a firm fixed price service award under simplified acquisition procedures, aimed at replacing and upgrading the existing CCTV and network surveillance system at U.S. Coast Guard Sector Key West, Florida. The requirement covers extensive enhancements across multiple building locations including B107, B108, B109, B48, B102, and the IDS area, involving the installation of new NDAA-compliant Hanwha AI-enabled cameras, wireless bridges, PoE switches, surge protectors, NVR systems, and cellular emergency communication equipment. All equipment must be newly installed, with existing infrastructure reused where feasible, and all work must comply with strict manufacturer specifications and Coast Guard security protocols. The contractor is responsible for removing obsolete systems, terminating and labeling cabling, configuring all devices, integrating the new systems with the existing video management platform, performing functional testing and commissioning, and delivering full documentation including equipment inventories, configuration records, and manufacturer warranties. A one-year quality warranty is mandated, and the contractor must hold current manufacturer certification for the proposed equipment. The solicitation requires all offerors to be registered in SAM with an active status and classified as a small business under NAICS code 561621, with limitations on subcontracting enforced. The government will award the contract on a Lowest Price, Technically Acceptable basis, with proposals due by 3 p.m. on August 17, 2026, submitted via email. Site visits are strongly encouraged and scheduled for August 5, with all personnel requiring pre-approval for base access and proper identification. Work is restricted to weekday hours of 8 a.m. to 4 p.m., excluding holidays, and weekend access requires prior written consent. Wage rate requirements under the Davis-Bacon Act apply, and all materials must be new and of the highest suitable grade. The anticipated award date is August 31, 2026, with performance to begin no later than 10 business days after award. The Contracting Officer’s Representative and technical points of contact are assigned to oversee compliance, inspection, and final acceptance, which requires a formal demonstration of full system operation at the site. All submittals must include technical and compliance documentation, and any deficiencies identified during final inspection must be corrected at no additional cost to the government.

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

System Integration and Final TestingThis contract requires the integration of cameras, servers, cabling, and wireless links into a fully operational system tailored for deployment in Key West, Florida, under the oversight of the Department of Homeland Security. The work involves end-to-end testing, system diagnostics, and final acceptance procedures conducted in coordination with designated government points of contact to ensure all components function as intended within operational standards. The project demands technical expertise in assembling and validating complex surveillance and communication infrastructure, with strict emphasis on reliability, security, and compliance. The contract is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, and it falls under NAICS code 541512 for computer systems design services. The solicitation was posted on July 22, 2026, with a firm deadline for responses on August 17, 2026, at 7:00 PM. Performance is localized to Key West with no specified additional office or agency address, and all deliverables must meet government requirements prior to formal acceptance.

Computer Systems Design Services

POSTED

DEADLINE

Server Closet Installation and Equipment RackingThe contract outlines the installation of server closets at a location in Key West, Florida, with a focus on creating secure, functional enclosures for network equipment. This includes the full scope of rack mounting, power distribution units, cooling systems, and cable management solutions to ensure proper environmental control and operational reliability. All work must comply with industry best practices for data center infrastructure and support the secure housing of sensitive network hardware deployed by the Department of Homeland Security. This opportunity is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified under SBA guidelines are eligible to respond. The NAICS code 238210 classifies the work as electrical and other construction installation services, aligning it with specialized facility installation rather than general contracting. The solicitation was posted on July 22, 2026, and responses are due by August 17, 2026, at 7:00 PM Eastern Time. The performance location is specifically identified as Key West, and the contracting activity falls under Base MIAMI, indicating centralized oversight from a larger Department of Homeland Security infrastructure office.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Wireless Bridge and Antenna Relocation and InstallationThe contract requires the relocation and installation of wireless bridges and antennae between buildings to restore critical inter-building connectivity. This includes precise alignment of equipment, comprehensive signal testing to ensure optimal performance, and full integration into the existing network infrastructure. The work must be performed at the specified location in Key West, Florida, with all tasks carried out to maintain secure, reliable communication between facilities. This is a subcontract under a Total Small Business Set-Aside, designated under NAICS code 238210, meaning only small business concerns are eligible to bid. The solicitation was posted on July 22, 2026, and responses must be submitted no later than August 17, 2026. The contract is managed by the Department of Homeland Security through its Base MIAMI office, and all work must comply with the technical and logistical expectations outlined in the solicitation to ensure seamless restoration of network services at the Key West site.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Low-Voltage Cabling and Conduit Installation (Building 108)The contract requires the installation of weatherproof cabling, conduits, and raceways within Building 108 in Key West, including the pulling of fiber and Cat6 cables, proper grounding, and accurate labeling to ensure long-term reliability and ease of maintenance. All work must adhere to applicable environmental and safety standards, with specific attention to durability against harsh coastal conditions such as salt spray, high humidity, and UV exposure. The project mandates full compliance with industry best practices for low-voltage infrastructure to support mission-critical communications systems. This is a total small business set-aside under the SBA program, classified under NAICS code 238210 for electrical and wiring installations, and is issued by the Department of Homeland Security through its Base MIAMI(00028) office. The solicitation was posted on July 22, 2026, with proposals due by August 17, 2026, at 7:00 PM. Performance is strictly limited to the designated location in Key West, Florida, with a ZIP code of 33040. The contract type is defined as a subcontract, and interested parties must respond through the official SAM.gov portal to be considered for award.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

CCTV Camera and Server Hardware SupplyThe contract involves the supply of IP cameras, video management servers, storage units, cabling, and associated hardware necessary for a surveillance system, along with required delivery, documentation, and coordination support for installation teams. All work must be performed at Key West, Florida, with a strict response deadline of August 17, 2026, and full compliance with small business set-aside requirements under the SBA program, meaning only qualified small businesses are eligible to compete. The solicitation falls under NAICS code 423490 for Other Electronic Parts and Equipment Merchant Wholesalers, indicating the procurement is focused on wholesaling and supply of electronic security hardware rather than pure services or installation labor. The contracting entity is the Department of Homeland Security through its Base MIAMI office, and the agreement is structured as a subcontract under a larger federal acquisition framework.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

CCTV System Design and Engineering SupportThe contract calls for comprehensive technical design, system integration planning, and engineering oversight to replace and modernize the CCTV, recording, and data transmission systems at a location in Key West, Florida. This includes developing detailed network diagrams, ensuring compatibility between legacy and new components, and providing ongoing engineering support to guarantee seamless system performance. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, with the North American Industry Classification System code 541330 indicating engineering services. The solicitation was posted on July 22, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Homeland Security under Base MIAMI(00028), emphasizing the critical nature of enhancing security infrastructure for federal operations in the region.

Engineering Services

POSTED

DEADLINE