Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

EMI Shielded Chamber and Control Room Installation

Active

Federal

Response Deadline10/30/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the design, fabrication, and installation of a high-attenuation EMI shield enclosure and shielded control room for prime contractors supporting the Naval Surface Warfare Center Dahlgren Division. The project requires the construction of a 36 by 20 by 13 foot chamber equipped with an 8,000 lb capacity floor system, waveguide air vents, bi-parting equipment doors, and electronically controlled personnel doors featuring finger stock. The contractor must ensure all work adheres to MIL-STD-461 standards to deliver a fully tested and operational EMI Shielded Chamber. This Department of Defense project is categorized under NAICS code 332322 and will be performed in the 22448 zip code area.

General Info

Design, fabricate, and install a MIL-STD-461 EMI shielded chamber for Naval Surface Warfare.

Agency

Department Of Defense → Nswc Dahlgren

NAICS

332322 - Sheet Metal Work Manufacturing

Place of Performance

VA, 22448

Set-Aside

NONE

Documents

This scope was carved out of N0017827QC601.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

EMI CHAMBER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 04:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Dahlgren

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Nswc Dahlgren

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs design, fabrication, and installation of a high-attenuation EMI shield enclosure and shielded control room for prime contractors on Naval Surface Warfare Center Dahlgren Division projects. Fabricates a 36' x 20' x 13' chamber, installs an 8,000 lb capacity floor system, electronically controlled personnel doors with finger stock, bi-parting equipment doors, and waveguide air vents. Adheres to MIL-STD-461. Delivers a tested, operational EMI Shielded Chamber.

Similar Contracts

Same NAICS industry code

seeking Small Businesses to supply products and services in support of our USAF Noise Suppressor Sustainment Contract

Solicitation # seeking-small-businesses-supply-products-services-support-our-usaf-noise-suppressor-sustainment

Vital Link Inc. is seeking small businesses across all socioeconomic categories to serve as subcontractors providing products and services in support of the USAF Noise Suppressor Sustainment Contract. The scope of work involves a wide range of industrial supplies and services, including raw materials such as stainless and carbon steel, hardware like nuts, bolts, and bearings, and specialized components including electrical and electronic PLC components, motors, and gearboxes. Additional needs include insulation, sealants, sheet metal, machined parts, concrete, painting, structural steel support, and freight and packaging services. Interested parties should align with NAICS codes including 335999, 238320, 325520, 332722, 332999, and 332322. For freight, crating, and packaging, the nonmanufacturer rule applies, deeming businesses small if they have fewer than 500 employees. The response deadline for this solicitation is December 31, 2026. Primary points of contact for this opportunity are Ashley Barry, Ashley Aguilar, and A.C. Kujawa at Vital Link Inc.

Vital Link Inc.

POSTED

about 5 hours ago

DEADLINE

Electrical Enclosure and Housing SupplyThis subcontract involves the fabrication and supply of seven empty control panel enclosures for the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for producing metal or composite housings that strictly adhere to the dimensions and specifications of NSN 6110015498726, which includes the application of required industrial coatings and finishes. The project falls under NAICS code 332322 and requires full compliance with the Buy American Act. Performance for this contract will take place in Tracy, California, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

Aluminum Alloy 6061-T6 Flat Bar SupplyThis subcontract involves the supply of extruded flat aluminum alloy 6061-T6 bars to support prime contractors fulfilling DLA supply contracts. The required material must be 0.312 inches thick and 3.500 inches wide, with lengths ranging between 10 and 12 feet, and must strictly conform to ASTM B660 standards. A total of 55 feet of certified aluminum bars are to be delivered to DLA Distribution in Warner Robins, Georgia. To ensure quality and compliance, the provider must maintain a QSLD listing and furnish a Certificate of Quality Compliance. Additionally, all marking and packaging must be performed in accordance with MIL-STD-129. The contract is associated with NAICS code 332322 and is managed under the Department of Defense.

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7M3-27-T-0485

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-0987

Solicitation SPE4A6-27-T-0987 is a Request for Quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 17 plain studs, identified by NSN 5307-01-582-4012 and part number 06-32041-101 from Daimler Truck North America LLC. The procurement falls under NAICS code 332322. Quotes are due by October 15, 2026, and must be submitted via the DIBBS portal. Offerors are required to provide a complete data package for both approved and alternate parts for evaluation purposes. The contract specifies a delivery timeline of 261 days after order, with a required delivery date of October 31, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129 and the Hazard Communication Standard for any hazardous materials. Technical and quality requirements are governed by the DLA Master List under reference RA001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates several federal regulations, including DFARS 252.204-7012 for cybersecurity, DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program, and various FAR clauses concerning equal opportunity and the prohibition of trafficking in persons. Offerors must maintain current representations and certifications in the System for Award Management.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Custom Galvanized Duct TransitionsThis subcontract involves the fabrication and delivery of custom galvanized sheet metal duct transitions for a 7.5-ton ground unit. The project supports prime contractors working on CAL FIRE facility projects located in Siskiyou. All manufacturing must be completed using fabrication shears and brakes in strict accordance with SMACNA standards for duct construction. The solicitation was posted on October 15, 2026, with a response deadline of October 31, 2026. Classified under NAICS code 332322, the scope of work encompasses both the technical production of the components and their subsequent delivery to the project site.

POSTED

about 19 hours ago

DEADLINE

Roof Coping and Flashing FabricationThis subcontract involves the fabrication and supply of custom coping metal and flashing for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work requires the production of 25-gauge G90 galvanized steel sheets laminated to a non-reinforced membrane in soft white, along with manufacturer standard sheet flashing with a minimum thickness of 60 mil. All materials must be delivered according to the specific requirements outlined in Spec sheet detail A-8-0.4. The opportunity is categorized under NAICS code 332322 and was posted on October 15, 2026, with a response deadline of December 17, 2026. This project is managed through the state of California for the Department of Corrections and Rehabilitation.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Overhead Door Parts and Hardware SupplierThis subcontract opportunity is for an Overhead Door Parts and Hardware Supplier to provide replacement components necessary for the maintenance and repair of municipal overhead doors on City of Redding projects. The scope of work includes the supply of tension cables, rollers, hinges, reversing safety edges, belts, pulleys, coil cords, and key ways. The selected supplier is required to provide manufacturer or distributor invoices for all parts and ensure delivery is made FOB Redding, California. The solicitation was posted on October 14, 2026, with a response deadline of October 28, 2026. This project falls under NAICS code 332322 and is intended to support prime contractors working with the City of Redding. Performance of the contract will take place in Redding, California, specifically within the 96003 zip code area.

City of Redding

POSTED

DEADLINE

Supply of Specialized Metal Sheets (NSN 9515009505323)This subcontract involves the supply of four precision-manufactured metal sheets for prime contractors supporting Department of Defense DLA supply contracts. The materials must be manufactured or sourced in strict accordance with the Technical Data Package and NSN 9515009505323. Compliance with MIL-STD-2073-1E and DLA Packaging Requirements for Procurement RP001 is mandatory for all packaging, and the provider must submit Metal Certification as specified in CDRL-METALSCERT. The contract is managed by Construction & Equipment MRO SVC I under NAICS code 332322, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by October 26, 2026, to provide the required metal sheets and accompanying certification documentation.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Waste Drain Strainer (NSN 4510016520064)This subcontract involves the procurement of one waste drain strainer for prime contractors working on Defense Logistics Agency Troop Support projects. The supplier is responsible for manufacturing or sourcing the item to strictly adhere to NSN 4510016520064 and the DIA Master List of Technical and Quality Requirements RA001. Additionally, the contractor must ensure full compliance with the Buy American Act and the Berry Amendment. The item is to be delivered FOB Destination to Yokosuka Naval Base in Japan. This opportunity is categorized under NAICS code 332322 and was posted by the Department of Defense. Interested parties must submit their responses by the deadline of October 26, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Fabrication of Ventilation Duct TerminalsThis subcontract involves the fabrication of 24 aluminum ventilation duct terminals for prime contractors supporting Department of Defense supply contracts at the DDSP New Cumberland Facility. The scope of work includes the manufacture of perforated bell mouth and bottom plate components in strict accordance with Basic Drawing NR 80064 690702 and MIL-DTL-22576A. Quality assurance and sampling must be performed following MIL-STD-1916 or ASQ H1331 standards. Due to the nature of the project, the contractor must be capable of handling Covered Defense Information and is required to complete a CMMC Level 2 self-assessment. The project falls under NAICS code 332322, with performance taking place in New Cumberland, Pennsylvania. Responses to the solicitation are due by October 26, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Precision Metal Tube Assembly FabricationThis subcontract involves the precision fabrication of five metal tube assemblies, specifically Bell Textron part number 209-062-759-127, for the DLA Weapons Support ASC Supplier OEM Division. The manufacturer must adhere strictly to OEM technical data and implement zero-non-conformance sampling in accordance with MIL-STD-1916 or ASQ H1331. Additive manufacturing is strictly prohibited for this project. The contract requires full compliance with the Buy American Act and the Berry Amendment. Performance will take place in San Diego, California. Interested parties must respond by October 22, 2026, to provide the completed and inspected assemblies under NAICS code 332322.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Nswc Dahlgren

Same awarding agency

Official RFP - NSWCDD HPM Support Services

Solicitation # N0017826R3107

Engineering Services

POSTED

about 23 hours ago

DEADLINE

B Department Operations Support

Solicitation # N0017827R3103

The B Department Operations Support contract, solicitation N0017827R3103, is a Cost-Plus-Fixed-Fee Level of Effort Task Order issued by the Naval Surface Warfare Center Dahlgren Division (NSWCDD). The requirement is solicited exclusively among SeaPort-NxG MAC holders and is designated as a small business set-aside under NAICS 541330. The contract provides comprehensive technical and support services across the acquisition lifecycle for Navy, Marine Corps, and Missile Defense Agency sensor systems. Key work areas include Information Technology, Program Financial Management, Technical Writing, Configuration Management, Program Analysis, Facilities Operations, Property Management, Procurement Support, and Electronics Technician services. Performance will occur primarily at NSWCDD in Dahlgren, Virginia, the Wallops Flight Facility in Wallops, Virginia, and at contractor facilities. The period of performance consists of a twelve-month base period followed by four twelve-month option years, totaling sixty months. The scope requires the contractor to provide on-site and callback support for critical incidents and testing, as well as surge support for mission-essential operations. Labor requirements are extensive, with significant hours allocated to Financial Analysts, Configuration Management Specialists, and Operations Support Specialists. Strict security and compliance standards are mandated, including CMMC Level 2 (Self) certification, adherence to NISPOM and SEAD-3, and compliance with SAE AS5553 for electronic part procurement to avoid counterfeit materials. Deliverables include the documentation of Standard Operating Procedures for Configuration Management and the monitoring of B40 test site and laboratory safety.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

Z-Fold Tuner Supply and IntegrationThis subcontract involves the supply and integration of Z-fold tuner systems for prime contractors working on projects for the Naval Surface Warfare Center Dahlgren Division. The scope of work includes sizing and supplying tuners tailored to specific chamber volumes, as well as the installation of corresponding motors and electronic controllers in strict accordance with OEM specifications. The ultimate objective is the delivery of a fully operational Z-fold tuner system integrated into the designated chamber. Managed under NAICS code 334511 for the Department of Defense, the project is centered in the 22448 zip code area. Interested parties should note that the response deadline for this opportunity is October 30, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Equipment Access Ramp FabricationThis subcontract involves the fabrication and installation of a heavy-duty equipment access ramp for prime contractors working on projects for the Naval Surface Warfare Center Dahlgren Division. The scope of work requires the construction of a structural steel ramp designed for an 8 by 10 foot bi-parting door, with a mandatory minimum load capacity of 8,000 pounds. All work must be performed in strict adherence to OSHA regulations and includes the final delivery of the installed ramp. The project is associated with NAICS code 332312 and is managed under the Department of Defense, with performance taking place in the 22448 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

EMI/RFI Power Filter Supply and InstallationThis subcontract involves the supply and installation of EMI/RFI filtered power systems for prime contractors supporting the Naval Surface Warfare Center Dahlgren Division. The primary objective is to isolate chambers from external interference by delivering installed and certified filtered power lines. The scope of work includes the implementation of MIL-STD-461 compliant power filters across multiple voltage specifications, specifically 120VAC at 20A, 208VAC at 60A, and 480VAC. Managed under NAICS code 238210 for the Department of Defense, the project is located in zip code 22448. Interested parties must note the response deadline of October 30, 2026, following the posting date of October 14, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Solicitation # N0017827QC601

The Naval Surface Warfare Center Dahlgren Division (NSWCDD) is soliciting quotations for the design and installation of a high-performance EMI Shielded Chamber and Shielded Control Room at its facility in Dahlgren, Virginia. The required enclosure must have internal dimensions of 36 by 20 by 13 feet, a floor capable of supporting 8,000 pounds, and specific access points including a 4 by 7 foot personnel door and an 8 by 10 foot equipment door with a supporting ramp. The project must adhere to MIL-STD-461, OSHA regulations, and OEM specifications. An optional requirement for Z-fold tuners with motors and controllers is also included. This is a firm-fixed-price acquisition for commercial items under FAR Part 12, with the award based on the Lowest Price Technically Acceptable basis. Quotes are restricted to Original Equipment Manufacturers (OEMs) or authorized resellers providing a Letter of Authorization. The delivery period is 25 weeks from the date of award, with shipping terms set as FOB Destination. All payments and receiving reports must be processed through the Wide Area Workflow (WAWF) system. The submission deadline for quotations is October 30, 2027, with an anticipated award date in December 2027.

Plate Work Manufacturing

POSTED

DEADLINE

Training Coordination and Mentorship ServicesThe Training Coordination and Mentorship Services subcontract supports NSWC Dahlgren by providing oversight, scheduling, and mentorship for the instructional workforce. The selected provider will coordinate training schedules across various schoolhouses and FCAs, manage resource distribution, and provide professional mentorship to Tier I through III instructors. Key deliverables include the maintenance of personnel qualification records and the delivery of comprehensive training schedules. Administrative requirements include the use of eCRAFT for financial reporting and PIEE/WAWF systems for contract management. Candidates must possess senior-level naval training experience to successfully execute these duties. This opportunity is categorized under NAICS code 541611 and is performed on-site in Dahlgren, Virginia.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 5 hours

LCS Training Facility (LTF) Specialized InstructionThis subcontract for the LCS Training Facility Specialized Instruction involves providing high-specialty Billet Specialty Training for prime contractors on NSWC Dahlgren projects. The primary focus is on the Littoral Combat Ship platform, specifically delivering Navigation and Ship Handling instruction to support T2Q and TYCOM certification for both Officers and Enlisted personnel. The scope of work includes the operation of high-fidelity LTF simulators to ensure the delivery of certified qualified personnel. The project is managed under the Department of Defense for NSWC Dahlgren and will be performed in Dahlgren, Virginia. Qualified providers must possess USCG Licenses or documented sea experience to meet the technical requirements of the instruction. The opportunity was posted on October 9, 2026, with a response deadline of October 16, 2026, falling under NAICS code 611519.

Other Technical and Trade Schools

POSTED

DEADLINE

in about 5 hours

Naval Training Material Development and AnalysisThe Naval Training Material Development and Analysis subcontract involves providing specialized design, development, and analysis of instructional materials for prime contractors supporting NSWC Dahlgren naval training projects. The scope of work focuses on creating curricula for new combat systems, identifying instructional gaps, and producing Train-to-Qualify and Type Commander certification materials. To execute these tasks, the contractor must utilize instructional design software and VR development tools while providing deep subject matter expertise in Naval Combat Systems. Managed under the Department of Defense for NSWC Dahlgren, the project requires the delivery of updated curricula and detailed analysis reports. Performance will take place in Dahlgren, Virginia, under NAICS code 611710. The solicitation was posted on October 9, 2026, with a response deadline of October 16, 2026.

Educational Support Services

POSTED

DEADLINE

in about 5 hours

Naval Combat Systems Instructional SupportThe Naval Combat Systems Instructional Support subcontract involves providing routine classroom and field instruction for prime contractors supporting NSWC Dahlgren naval training projects. The scope of work includes delivering schoolhouse training, deploying with Mobile Training Teams, and conducting Train the Trainer events at international locations and Fleet Concentration Areas. Instruction is delivered through high-fidelity simulation and Virtual Reality courseware to ensure accepted training outcomes. This opportunity is managed by the Department of Defense for NSWC Dahlgren, with performance based in Dahlgren, Virginia. Qualified personnel must possess USCG Licenses or Cybersecurity Workforce certifications. The solicitation was posted on October 9, 2026, with a response deadline of October 16, 2026, under NAICS code 611519.

Other Technical and Trade Schools

POSTED

DEADLINE

in about 5 hours

SCSTC Instructor Services Follow-on

Solicitation # N0017827R3102

The SCSTC Instructor Services Follow-on is a combined Advance Notice and Sources Sought for the Naval Surface Warfare Center Dahlgren to obtain instructional, curriculum development, and technical support services for the U.S. Navy and foreign military partners. The scope of work supports the Surface Combat Systems Training Command through schoolhouse training, Mobile Training Teams, Combat Information Center Training Teams, and Billet Specialty Training via the Littoral Combat Ship Training Facility. The requirement is structured as a hybrid contract consisting of Firm Fixed Price for stable, measurable services and Cost-Plus-Fixed-Fee Level of Effort for emergent and developmental support. The anticipated period of performance includes a twelve-month base period with four subsequent twelve-month option years, totaling sixty months. The effort requires a significant labor force, including key personnel such as Instructor Leaders, Senior Mentors, and Training Coordinators, alongside various tiers of instructors and training material analysts. Specific qualifications are mandated, including Cybersecurity Workforce Certifications for Tier II and III instructors and USCG licenses or documented sea experience for LTF Navigation and Ship handling instructors. Contract administration requires invoicing through the Wide Area Workflow module in PIEE and financial reporting via the eCRAFT system. Interested SeaPort MAC holders must submit capability statements and certify their status regarding organizational conflicts of interest and limitations on subcontracting.

Engineering Services

POSTED

DEADLINE

in about 5 hours

GUN WEAPON SYSTEMS (GWS) Request for Information

Solicitation # GUN_WEAPONS_SYSTEM

The Naval Surface Warfare Center Dahlgren Division (NSWCDD) E Department has issued a Request for Information (RFI) to assist in planning the acquisition strategy for the Gun Weapon Systems (GWS) program. The government is seeking industry feedback on a proposed hybrid contract structure combining Firm-Fixed-Price (FFP) and Cost-Plus-Fixed-Fee (CPFF) models, intended for execution via the SeaPort-NxG Multiple Award Contract vehicle. The scope of work encompasses technical support across multiple effectors, ammunition, and weapon systems, including system design, architecture, hardware development, testing, and program management. High-risk activities such as core mission systems engineering, hardware prototyping, and live test and evaluation are designated as CPFF efforts, while routine inventory and packaging tasks are categorized as FFP. The anticipated contract is structured for a base year and four option years, with an estimated total effort of 1,082,880 labor hours. Requirements include strict adherence to military and federal standards, such as MIL-STD-31000 for technical data packages and various IPC certifications for electronic assemblies. Contractors must be capable of providing secure, accredited conference facilities for up to twenty-five attendees and ensuring personnel comply with extensive security and safety regulations, including NISPOM and DoDI 5200.48. Interested respondents under NAICS code 541330 must submit their feedback and company qualifications by October 29, 2026, to inform the government's final determination on small business set-asides.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS