Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Employee Parking Services for BEP District Currency Facility

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision and management of 500 dedicated employee parking spaces located within a quarter-mile radius of the Bureau of Engraving and Printing (BEP) facility at 14th and C Streets, S.W., Washington, D.C. The contractor is fully responsible for delivering the parking services without any government oversight, ensuring seamless operation and management of the parking assets. This arrangement places accountability solely on the contractor to meet all performance obligations. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, targeting small business participation. The relevant NAICS code for this contract is 532291, indicating parking lots and garages as the primary business classification. The contracting agency is the Office of the Chief Procurement Officer within the Department of the Treasury. The work is to be performed in Washington, D.C., with a solicitation posted on October 28, 2025. The contract emphasizes small business involvement in providing essential employee parking services near a critical federal facility.

General Info

Provide and manage 500 employee parking spaces near BEP, DC; full contractor responsibility, small business set-aside.

Agency

Department Of The Treasury → Office Of The Chief Procurement OfficerView Agency

NAICS

532291 - Home Health Equipment RentalView NAICS

Place of Performance

Washington, DC, 20228, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedOct 28

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Treasury → Office Of The Chief Procurement Officer

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide and manage 500 dedicated employee parking spaces within a ¼-mile radius of the BEP facility at 14th and C Streets, S.W., Washington, D.C. The contractor assumes full responsibility for performance with no government oversight.

Similar Contracts

Same NAICS industry code

Parking Management and Vehicle AccessThe contract requires the provision and comprehensive management of parking services for up to 200 vehicles, with an absolute mandate of 100% availability throughout the duration of the event. All operations must strictly adhere to federal, state, and local traffic, safety, and access regulations to ensure seamless and secure vehicle movement and parking. The contractor is responsible for the full lifecycle of parking logistics, including layout planning, signage, staffing, traffic flow control, and emergency access protocols, all while maintaining compliance with regulatory standards at all times. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, classified under NAICS code 532291 for Other Activities Related to Real Estate. The opportunity was posted on July 9, 2026, with responses due by July 24, 2026, and the work is to be performed in Rio Rancho, New Mexico, with a zip code of 87144. The contracting activity falls under the Department of Defense, specifically the W7NQ Uspfo Activity Nm Arng, and the performance location is fixed with no flexibility in geographic scope.

W7NQ Uspfo Activity Nm Arng

POSTED

DEADLINE

Lighting and Special Effects RentalCypress-Fairbanks ISD is seeking a subcontractor to supply and install stage lighting, uplighting, fog machines, and LED effects for events requiring enhanced visual ambiance and production quality. The contract covers the full scope of equipment provision, setup, and operation to meet performance standards for various campus and district events. The solicitation is open for responses through June 30, 2027, with work expected to be performed at locations designated by the district, though specific sites are not listed. The NAICS code 532291 identifies this as a rental and leasing service for recreational and entertainment goods, indicating the temporary nature of the equipment deployment. Interested parties must submit proposals via the provided Texas SmartBuy portal before the deadline to be considered for award.

CYPRESS-FAIRBANKS ISD

POSTED

DEADLINE

Meeting/Training Space RentalThe contract seeks providers to supply ADA-compliant meeting and training spaces equipped with audiovisual technology for in-person events and educational sessions. These facilities must meet accessibility standards to ensure full inclusion for individuals with disabilities and include modern AV systems to support effective training delivery. The requirement is structured as a subcontract under the Food and Nutrition Service, part of the Department of Agriculture, with the NAICS code 532291 indicating a focus on other commercial and industrial machinery and equipment rental and leasing. The solicitation was posted on July 1, 2026, and responses are due by July 31, 2026. No specific location or point of contact is listed, suggesting flexibility in where the services may be delivered, though performance must comply with federal accessibility mandates. Interested parties must ensure their offerings align with both technical and compliance requirements to qualify for consideration.

Food And Nutrition Service

POSTED

DEADLINE

Facility Operations and Compliance ManagementThe contract requires the operation and maintenance of a physical facility dedicated to service delivery, with strict adherence to ADA accessibility standards, fire safety regulations, and all applicable safety codes. The successful bidder must ensure that services are delivered without any waitlists, guaranteeing immediate placement for clients at all times. This subcontract falls under NAICS code 532291 and is managed by the Texas Eastern Probation Office in Tyler under the Judicial Branch. Performance is required specifically in Tyler, and the proposal must be submitted by July 27, 2026, with no solicitation number or set-aside classification provided. The facility must be fully functional, compliant, and consistently available to support uninterrupted service operations.

Texas Eastern Probation Office-Tyler

POSTED

DEADLINE

Facility and Administrative Support ServicesThe contract seeks a provider to deliver ADA-compliant, confidential office space within the designated catchment area, specifically in Orange, along with comprehensive administrative support services. This includes managing scheduling, client intake procedures, and records management to ensure seamless operational workflow. The facility must meet all accessibility standards and maintain strict confidentiality to support judicial functions under the Texas Eastern Probation Office-Tyler. The opportunity is structured as a subcontract under NAICS code 532291, with a response deadline of July 27, 2026, at 10:00 PM. The work is tied to the Judicial Branch, emphasizing the need for secure, professional environments conducive to probation and court-related activities. While specific location details like state and zip code are not provided, the place of performance is clearly identified as Orange. There is no set-aside classification specified, and the contract does not include a solicitation number or point of contact information.

Texas Eastern Probation Office-Tyler

POSTED

DEADLINE

Lodging and Site Support InfrastructureThe contract titled Lodging and Site Support Infrastructure is a small business set-aside subcontract under the NAICS code 532291, designated for total small business participation, and is managed by the Department of Defense through its W7N7 Uspfo Activity Wv Arng office. The work requires comprehensive support services including the provision of cots, lodging accommodations, site preparation and ongoing maintenance, and fuel supply for all equipment involved at the designated event location in Glen Jean, West Virginia, with a zip code of 25846. This effort is intended to ensure operational readiness and logistical sustainability at remote or temporary event sites by delivering essential infrastructure and resources necessary to sustain personnel and equipment during deployment periods. The contract was posted on June 18, 2026, and is accessible through the SAM.gov platform for qualified small business contractors seeking to fulfill these critical support obligations.

W7N7 Uspfo Activity Wv Arng

POSTED

about 1 month ago

DEADLINE

Breakout Room FacilitationThe contract involves providing a dedicated breakout room in Springfield on Thursday, March 5, 2026, from 7:30 to 9:00 AM. This includes not only the space but also setup and access arrangements to facilitate small group discussions during that time. The service is being subcontracted under the NAICS code 532291, which relates to office space rental. The contract is issued by the Illinois Law Enforcement Training and Standards Board and falls under their jurisdiction within the state of Illinois. Although specific details about organization type, set-aside status, and contact information are not provided, the contract aims to support the agency's operational needs by accommodating focused group interactions during a scheduled event. The posted date for this solicitation was January 14, 2026.

Illinois Law Enforcement Training and Standards Board

POSTED

DEADLINE

Classroom Rental – Multi-Day UseThis contract involves the rental of two classroom spaces at Loyola University in Chicago for a duration of three consecutive days. The agreement is designated as a subcontract under the NAICS code 532291, which pertains to leasing and rental services. The activity is managed by the Asset Management agency in Illinois, with the classroom facilities located in the 60601 zip code area of Chicago. The contract does not specify a solicitation number or set-aside type, indicating it may not be restricted to certain groups or categories of vendors. The rental is intended for multi-day use, providing the lessee access to the classrooms for a short-term educational or event-related purpose. Details such as the point of contact and further organizational information were not included, but the public link to the contract details is provided through the Illinois state procurement website.

Asset Management

POSTED

DEADLINE

Half-Day Conference Hall Rental – Kasbeer HallThis contract involves the rental of Kasbeer Hall for a half-day period to facilitate training activities. The event is scheduled to take place in Chicago, with the zip code 60601, and is managed by the Asset Management agency in Illinois. The arrangement falls under the NAICS code 532291, which pertains to formal halls and conference room rentals. The contract is classified as a subcontract and was publicly posted on December 16, 2025. While details such as the solicitation number, specific agency office address, and point of contact are not provided, the focus remains clearly on securing the conference hall for the designated half-day use. This engagement supports the agency’s operational requirements for training purposes and emphasizes the logistical need for a professional space within the city of Chicago.

Asset Management

POSTED

DEADLINE

Full-Day Conference Hall Rental – Kasbeer HallThe contract involves the rental of Kasbeer Hall at Loyola University in Chicago for two full days, intended to facilitate training sessions. This subcontract, categorized under NAICS code 532291, falls under the management of the Illinois Asset Management agency. The location for the event is specified as Chicago with the postal code 60601, ensuring a central and accessible venue for participants. Key details include the full-day use of the conference hall, allowing ample time for comprehensive training activities. The contract was posted on December 16, 2025, and serves the agency's operational needs by securing a suitable space for educational events. While there is no specified set-aside type or direct contact point provided, the arrangement underscores the agency's commitment to effective resource utilization and event planning through a reputable academic institution.

Asset Management

POSTED

DEADLINE

Training Facility Operations and Site ManagementThe contract involves managing U.S.-based training facilities with responsibilities encompassing logistics coordination, maintenance of equipment, and ensuring compliance with applicable domestic performance standards. It is structured as a subcontract under the Department of Transportation, targeting operations that support effective training environments. The contract falls under the NAICS code 532291, indicating a focus on equipment rental and leasing services, which aligns with the upkeep and operational aspects of the training sites. The opportunity was posted on December 15, 2025, with a response deadline extending to January 31, 2028, providing a substantial timeframe for interested parties to submit proposals. While specific location details and certain organizational information remain unspecified, the contract's primary objective is clear: to ensure that training facilities operate smoothly and meet all regulatory requirements. This would typically include managing facility logistics, maintaining the necessary equipment to support training activities, and adhering to standards set forth by the contracting agency.

Dept Of Transportation

POSTED

DEADLINE

Warehouse Facility Activation and Commissioning

City of Jurupa Valley

POSTED

DEADLINE

More opportunities from Department Of The Treasury → Office Of The Chief Procurement Officer

Same awarding agency

Transportation & Incineration of Disintegrated Non-Securities Waste ServicesThe Bureau of Engraving and Printing intends to award a five-year blanket purchase agreement for the transportation and incineration of disintegrated non-securities waste generated at the District Currency Facility, with services required to be performed at a Waste-to-Energy facility. The contract will be structured in five annual ordering periods running from September 21, 2026, through September 20, 2031, during which the selected contractor must supply all personnel, equipment, vehicles, materials, and supervision necessary to safely transport and incinerate the waste. This solicitation is a total small business set-aside under NAICS code 562219, meaning only small businesses are eligible to compete. The procurement will follow Federal Acquisition Regulation Part 12 procedures and will be conducted electronically through SAM.gov, with proposals due by July 31, 2026, and an anticipated award date of September 21, 2026. The contracting office is located in Washington, D.C., and all performance will occur within the District of Columbia, with JerKendra Holloway serving as the primary point of contact for the Office of the Chief Procurement Officer under the Department of the Treasury.

Other Nonhazardous Waste Treatment and Disposal

POSTED

about 21 hours ago

DEADLINE

Elevator ModernizationThe solicitation 2031ZA26Q00100 for Elevator Modernization is a Firm Fixed Price contract issued by the Office of the Chief Procurement Officer within the Department of the Treasury, targeting a total small business set-aside under NAICS code 541330. The contract requires the contractor to develop comprehensive bridging documents, including conceptual design, technical specifications, and performance criteria, to enable the subsequent solicitation of a design-build construction contract for the complete modernization of seventeen electric elevators—twelve passenger and five freight—as identified in the 2024 Elevator Assessment. Work involves replacing all obsolete or end-of-life components, upgrading MEP systems, abating asbestos-containing materials, removing PCBs, and making structural and architectural alterations to bring machine rooms and hoistways into compliance with current codes. The new elevator controllers must be fully integrated with the Bureau of Engraving and Printing’s existing SCADA system. All work must adhere to stringent environmental, health, and safety standards including EM 385-1-1, OSHA regulations, ABAAS, and BEP-specific EHS requirements, while minimizing disruption to facility operations and achieving sustainability targets such as LEED compliance. Deliverables include a detailed survey report, Basis of Design documentation, and a 35% design submission with supporting engineering calculations and a draft commissioning plan, all formatted to BEP CAD standards. Proposals must be submitted electronically by 12:00 p.m. Eastern Time on July 28, 2026, following strict formatting rules: three volumes totaling 20 maximum pages for technical and past performance sections with 12-point minimum font, single spacing, and one-inch margins, while pricing is unrestricted in length. Offerors must be currently registered in SAM and meet pass/fail criteria for Technical Capability and Past Performance, with award going to the lowest-priced technically acceptable offer. The performance period is an 8-month base term with no options, targeting a 230-day duration after notice to proceed, with scheduled work dates from September 1, 2026, to April 30, 2027, at the Bureau of Engraving and Printing facility in Washington, DC. Performance is constrained by standard working hours, an annual year-end shutdown from December 25 to January 1, and mandatory work permits for high-risk activities. Contractors must maintain insurance as required under FAR clauses 52.

Engineering Services

POSTED

DEADLINE

WASTEWATER PRETREATMENT PLANT OPERATION AND MAINTENANCE SERVICESThe Bureau of Engraving and Printing in Washington, DC is seeking contractor services to manage, operate, maintain, and provide technical support for its Industrial Wastewater Pretreatment Plant and associated Storm Water Programs on a 24/7 basis. The plant consists of four distinct systems: the Wiping Solution Wastewater Pretreatment Plant, the Plating Wastewater Pretreatment Plant, the Grease Trap Wastewater Pretreatment Plant, and the Wiping Solution Recycling Plant, all supported by an on-site laboratory and materials storage area. The contractor will be responsible for ensuring continuous compliance, supply management, preventive and corrective maintenance, and overall operational integrity of these systems to meet environmental and regulatory standards. The solicitation, numbered 2031ZA26R00023, was posted on July 15, 2026, with responses due by September 15, 2026. It is being conducted under the 8(a) program as a competed acquisition, targeting small disadvantaged businesses. The North American Industry Classification System code is 561210, which pertains to waste collection and treatment services. The contract will be managed by the Office of the Chief Procurement Officer within the Department of the Treasury, with performance taking place at the BEP facility in Washington, DC, zip code 20228. Primary point of contact for inquiries is Marico Sellers, reachable via email at marico.sellers@treasury.gov.

Facilities Support Services

POSTED

DEADLINE

in about 2 months

Request for Quote (RFQ) for Fourier Transform Infrared (FTIR) MicroscopeThe Bureau of Engraving and Printing’s Research Analysis Division within the Office of Technology Development is seeking a Fourier Transform Infrared (FTIR) Microscope through a combined synopsis and solicitation for commercial items, with no separate written solicitation to be issued. The requested equipment must be capable of capturing microscopic images and localized FTIR spectra to support critical functions within the District Currency Facility and must fully comply with all current U.S. commercial codes and industrial standards for laboratory-grade analytical instruments. The contractor is responsible for delivering the equipment, performing installation, and providing comprehensive training to ensure seamless integration and operational readiness. All references to brand names or trademarks are for illustrative purposes only and do not imply government endorsement. This solicitation, identified as RFQ 2031ZA26Q00102, is a Total Small Business Set-Aside under FAR 19.5, with NAICS code 334516, and is open exclusively to small businesses. Responses are due by July 31, 2026, at 6:00 PM Eastern Time, and the opportunity was posted on July 15, 2026. The performance location is in Washington, D.C., with the point of contact being Naweed Nezam of the Department of the Treasury, Office of the Chief Procurement Officer. The contract will be managed through the SAM.gov portal, and all quotations must meet or exceed the technical specifications outlined in the Statement of Work without reliance on any single manufacturer or model designation.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Physical Vapor Deposition (PVD) Laser Cleaning ServicesThe contract requires the provision of ablative laser cleaning services for four IPC 1100 Physical Vapor Deposition (PVD) machines located at the Bureau of Engraving and Printing’s DC Currency Facility and Western Currency Facility in Washington, D.C. The effort replaces manual, abrasive cleaning methods with a precise, non-contact laser process to remove chrome deposits from stainless steel components such as chamber shields, viewports, and cryogenic traps, ensuring the integrity and performance of equipment critical for producing high-quality intaglio plates. The work must comply with ANSI Z136.1 standards for laser safety, including the establishment of a Laser Controlled Area with protective barriers and beam stops, and requires physical masking of sensitive parts using laser-opaque materials like copper foil or high-temperature tape. All personnel must undergo BEP-conducted background investigations, wear ID badges at all times, be escorted by BEP staff, and adhere to strict security protocols, including advance notification for foreign nationals and prohibitions on weapons on site. The contract is a Firm Fixed Price procurement under NAICS code 811310, structured as a total small business set-aside with a base period of one year beginning 30 September 2026 and four optional one-year extensions through 29 September 2031, covering scheduled cleaning cycles for all machines across both facilities. Offerors must submit a three-volume proposal—Technical, Past Performance, and Price—each adhering to strict formatting rules including 8.5" x 11" pages with one-inch margins, minimum 12-point font in Times New Roman, Calibri, or Arial, single line spacing, and no condensed fonts. Volume I and II are capped at ten pages each, while the Price volume has no limit. Proposals are due by 12:00 p.m. Eastern Time on 10 July 2026 via email to the designated point of contact. Technical acceptability is determined as a pass/fail gate, requiring full compliance with all solicitation requirements, and pricing completeness is mandatory; failure in either disqualifies submission. Evaluation prioritizes technical capability, past performance on similar contracts, and fair and reasonable pricing analyzed under FAR Subpart 12.201-4, with award going to the lowest-priced technically acceptable offer. Payments must be submitted electronically through the Invoice Processing Platform unless otherwise authorized, and the Contractor must adhere to all applicable FAR and DTAR clauses, including labor standards, code of

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Zeiss EVO-15 Scanning Electron Microscope (SEM) MaintenanceThe Bureau of Engraving and Printing is seeking a contractor to provide comprehensive non-personal services for the preventive maintenance and troubleshooting of the Zeiss EVO-15 Scanning Electron Microscope at the District Currency Facility in Washington, D.C. The contractor is responsible for supplying all personnel, equipment, tools, materials, and supervision required to perform these services without any direct government oversight, maintaining full accountability to the government through the contracted entity. The work includes all necessary support to ensure the SEM operates at peak performance in alignment with the defined Performance Work Statement, with no supervision or control exercised by the government over day-to-day service delivery. The contract has a one-year base period beginning 3 August 2026 and extending through 2 August 2027, with four additional one-year option periods available, potentially extending the total performance period to five years. The solicitation is open to full and open competition under NAICS code 811210 for Electronic and Precision Equipment Repair and Maintenance, and responses must be submitted electronically via SAM.gov by 24 July 2026. The solicitation, issued on 15 July 2026 under number 2031ZA26Q00122, is managed by the Office of the Chief Procurement Officer within the Department of the Treasury, with inquiries directed to JerKendra Holloway at jerkendra.holloway@bep.gov. All performance is to occur at the facility located in Washington, D.C., with no set-aside provisions applied.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Raw Material and Substrate SupplyThe contract entails the supply of high-opacity, coated paper substrates equipped with a permanent pressure-sensitive adhesive, specifically designed for use in currency label production. The materials must meet stringent quality standards to ensure durability, clarity, and adhesion under varied environmental conditions, with a mandatory requirement for recycled content certification to align with sustainability mandates. All submissions must comply with technical and environmental specifications, and vendors are expected to provide documented proof of material composition and certification throughout the contract term. This is a total small business set-aside under the SBA program, restricted exclusively to small business concerns as defined by the NAICS code 322220 for paper manufacturing. The opportunity is posted under the Office of the Chief Procurement Officer within the Department of the Treasury, with performance required at Washington, D.C. 20228. Proposals must be submitted by July 31, 2026, at 8:30 p.m. EDT, and all applicants must be registered in SAM.gov to be eligible for award. The procurement supports secure government currency operations and emphasizes responsible sourcing through certified recycled materials.

Paper Bag and Coated and Treated Paper Manufacturing

POSTED

DEADLINE

Quality Assurance and Testing ServicesThe contract titled Quality Assurance and Testing Services is a small business set-aside solicitation under the NAICS code 541380, issued by the Office of the Chief Procurement Officer within the Department of the Treasury. It seeks qualified independent service providers to perform comprehensive inspection, testing, and certification of label batches, with a focus on barcode quality, color accuracy, tamper evidence, and adherence to ANSI/ASQ Z1.4 sampling standards. The work is to be performed in Washington, D.C., with a zip code of 20228, and all responses must be submitted by July 31, 2026, at 8:30 PM Eastern Time. The solicitation is specifically reserved for total small business concerns as defined under SBA regulations, ensuring that only eligible small businesses may bid. The contract is structured as a subcontract and is publicly accessible via a SAM.gov link for further reference.

Testing Laboratories and Services

POSTED

DEADLINE

Specialized Packaging and Kitting ServicesThe contract involves specialized packaging, kitting, and labeling of currency labels in strict compliance with government standards, organized by BEP Process Number, ensuring accurate and secure handling of sensitive financial materials. All activities must adhere to Department of Transportation protocols for shipping and include proper carton marking to meet regulatory requirements for transport and identification. The work is to be performed at a designated location in Washington, D.C., with a zip code of 20228, and requires full compliance with federal guidelines for packaging and labeling currency-related items. This is a total small business set-aside under the SBA program, meaning only small businesses qualifying under the North American Industry Classification System code 424990 are eligible to bid. The opportunity is issued by the Office of the Chief Procurement Officer within the Department of the Treasury and is structured as a subcontract. The solicitation was posted on July 10, 2026, with a firm deadline for responses on July 31, 2026, at 8:30 p.m. Eastern Time. All bidders must demonstrate capability in handling federally mandated processes and maintaining compliance throughout the entire lifecycle of packaging, kitting, labeling, and shipping operations.

Other Miscellaneous Nondurable Goods Merchant Wholesalers

POSTED

DEADLINE

High-Security Pressure-Sensitive Label ManufacturingThe contract calls for the precision manufacturing of high-security, tamper-evident, pressure-sensitive labels specifically designed for U.S. currency bundles and Cash-Paks, demanding strict adherence to federal standards for authenticity and integrity. Each label must incorporate Pantone color matching to ensure visual consistency with official currency specifications, incorporate machine-readable barcodes for automated tracking, and be delivered in continuous rolls suitable for high-volume institutional use. Production must meet rigorous quality control benchmarks to prevent counterfeiting, unauthorized modification, or degradation under standard handling conditions. This is a total small business set-aside under the SBA program, exclusively open to small businesses as defined by the NAICS code 323111, which pertains to commercial printing. The solicitation was posted on July 10, 2026, with a firm response deadline of July 31, 2026, at 8:30 p.m. Eastern Time. Performance is required to take place in Washington, D.C., with a ZIP code of 20228, under the oversight of the Office of the Chief Procurement Officer within the Department of the Treasury. All manufacturing processes, materials, and delivery methods must comply with federal security protocols and be capable of integration into existing U.S. currency handling systems without disruption or delay.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Currency Bundle Labels and Cash PakThe U.S. Department of Homeland Security, through the Office of the Chief Procurement Officer, is conducting a sources sought action for currency bundle labels and cash-pak labeling solutions under solicitation number 2031ZA26N00047, with a response deadline of July 31, 2026. This effort is specifically designated as a Total Small Business Set-Aside under FAR 19.5, requiring all responders to qualify as small businesses under NAICS code 322299 with no more than 500 employees. The procurement seeks technical capability statements and product documentation from small business contractors capable of supplying high-security, pressure-sensitive labels used by the Bureau of Engraving and Printing for currency bundle and cash-pak applications across all BEP facilities. Labels must adhere to strict technical specifications including white coated substrates with permanent pressure-sensitive adhesive, black text printing, Pantone® color matching, bar code compliance meeting ANSI X3.182 Grade C/10/630 or better, and tamper-evident features for cash-pak labels. Every fourth bundle label must include an 8 by 3 mm horizontal black counting mark, and all labels must be delivered in numerically matched process sets—either 100K (3,200 bundle labels and 200 cash-pak labels) or 200K (6,400 bundle labels and 400 cash-pak labels)—with no breaks in the continuous roll format. Packaging must conform to Department of Transportation and National Motor Freight Classification standards, with cartons capped at 381mm in width, depth, and 305mm in height, and each carton clearly marked with process number, bank identification, currency denomination and series, serial number prefixes and suffixes, manufacturer name, and BEP purchase order number. The Bureau of Engraving and Printing reserves the right to inspect and test all submitted products on its production equipment with inspection levels III for bar code and human-readable characters at an AQL of 0.025, and Level II for appearance and workmanship at an AQL of 1.5, with zero tolerance for numbering inaccuracies. Each delivery must be accompanied by a signed certification confirming compliance with all technical, environmental, health, and safety requirements including adherence to BEP document 75B-07.0-05 and disclosure of any recovered content. Attachments detail

All Other Converted Paper Product Manufacturing

POSTED

DEADLINE

DCF AHU CoilsThe Bureau of Engraving and Printing in Washington, DC is seeking two 5WR-33 x 117-08D12AL chilled water coils to replace existing units in its air handling systems, ensuring continued efficient cooling, precise temperature and humidity control, energy savings, improved air quality, and enhanced reliability of critical HVAC infrastructure serving production and office areas. The contract, issued under solicitation number 2031ZA26Q00108 with a title of DCF AHU Coils, is a Firm Fixed Price procurement set aside exclusively for small businesses under FAR 19.5, classified under NAICS code 238220. The coils must meet specific technical specifications including 0.625-inch OD copper tubes with 0.020-inch wall thickness, 0.006-inch corrugated aluminum fins, and 16-gauge T304 stainless steel casings, with each unit weighing approximately 665 pounds and tagged as A9-4 CW coil top/bot. Delivery is required within 90 days of the notice to proceed, with a firm deadline of September 1, 2026, to the Bureau’s Annex Loading Dock at 14th and C Streets SW, Washington, DC. The contractor must coordinate delivery timing directly with the Contracting Officer’s Representative, Patrick Brown, and perform a visual inspection upon arrival to confirm no damage occurred during transit. The solicitation emphasizes compliance with a comprehensive set of FAR clauses governing ethics, whistleblower protections, privacy safeguards, unmanned aircraft prohibitions, small business subcontractor payments, and U.S.-flag vessel preferences, with Alternate I and II of 52.247-64 specifically incorporated. Offerors must be registered in SAM.gov with current representations and certifications, including small business status, UEI and CAGE codes, ownership disclosures, and compliance with Buy American and Service Contract Labor Standards. Evaluation will prioritize price, with technical acceptability considered secondary, and offers must include detailed technical documentation, warranty terms, and full compliance with FAR 52.212-3 representations. Proposals may be submitted via SF 1449 or company letterhead, must be received by July 20, 2026, and pricing must remain firm for 30 days after the deadline. All subcontractors must flow down key ethics and labor compliance clauses, including those addressing human trafficking, equal opportunity for

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 1 month ago

DEADLINE