Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Engineering Support Services for Automation Systems

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Engineering support services are being procured to provide on-site or remote assistance for the setup, troubleshooting, optimization, and lifecycle management of robotic wire harness systems used in automated environments. The work is scoped to ensure seamless integration and sustained performance of these systems, with technical expertise required across all phases from initial deployment through end-of-life processes. This subcontract falls under NAICS code 541330 for engineering services and is managed by the Department of Defense through the W6QK Acc-Apg Cont Ct Tyad Ofc office, with all performance activities centered at Tobyhanna, Pennsylvania, ZIP code 18466. The contract was posted on May 14, 2026, and is intended to support critical defense automation infrastructure through skilled engineering resources capable of operating both onsite and remotely as needed.

General Info

Engineering support for robotic wire harness systems in defense automation at Tobyhanna, PA.

Agency

Department Of Defense → W6QK Acc-Apg Cont Ct Tyad OfcView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Tobyhanna, PA, 18466, USA

Set-Aside

NONE

Documents

This scope was carved out of W51AA126PA041.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Robotic Wire Harness Manufacturing Machines

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg Cont Ct Tyad Ofc
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W6QK Acc-Apg Cont Ct Tyad Ofc
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
On-site or remote engineering support for setup, troubleshooting, optimization, and lifecycle management of robotic wire harness systems.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
Scattergood GS. Units 1&2 Green Hydrogen-Reaady Modernization
Solicitation # scattergood-gs-units-12-green-hydrogen-reaady-modernization
Kiewit Infrastructure West Co. is seeking sub-quotes for the Scattergood GS Units 1&2 Green Hydrogen-Ready Modernization project for the City of Los Angeles Department of Water and Power. The scope of work is extensive, encompassing professional and technical services such as civil, structural, mechanical, electrical, and instrumentation and controls engineering, as well as utility locating, potholing, geotechnical and geophysical investigations, LIDAR surveying, BIM/3D modeling, and environmental assessment and compliance. Additional requirements include hazardous materials surveys, permitting support, and CPM scheduling. The solicitation specifically encourages participation from certified Disadvantaged Business Enterprises, including MBE, WBE, and OBE firms. Interested bidders must contact Kiewit to receive an Invitation to Bid through the Building Connected system, with a bid deadline of September 11, 2026. To be considered responsive, firms must possess a valid California Contractor's license and provide acceptable insurance. Responsible subcontractors and material contractors are required to provide bonding for 100 percent of their contract value, though Kiewit will reimburse the bond premiums. Kiewit is a signatory to several collective bargaining agreements and requires bidders to demonstrate an ability to maintain labor harmony on the project. Plans and specifications are available for review at Kiewit's Costa Mesa, California office, and further inquiries should be directed to Lead Estimator Joe Bockelman.
Kiewit Infrastructure West Co.

POSTED

about 8 hours ago

DEADLINE

in 18 days
View Details
NAICS: 541330
New
Seeking Qualified Subconsultants for City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3
Solicitation # seeking-qualified-subconsultants-city-bends-southwest-sewer-improvement-phase-3-project-no-1ssw3
Water Systems Consulting, Inc. is seeking qualified subconsultants to assist with the Southwest Sewer Improvement Phase 3 project for the City of Bend, Oregon. The scope of work involves professional design services to address sewer system deficiencies, including the extension of gravity sewer mainlines, the decommissioning of existing pump stations, and the installation of service laterals for properties currently using onsite septic systems. The project may also encompass necessary transportation improvements. WSC is specifically looking for expertise in roadway and drainage engineering, surveying and mapping, right of way services, and public outreach. This project is funded by the Clean Water State Revolving Fund through the Oregon Department of Environmental Quality. The solicitation is open to various small business certifications, including DBE, WOSB, and SDVOSB, with a response deadline of September 29, 2026.
Water Systems Consulting, Inc.

POSTED

about 8 hours ago

DEADLINE

in 17 days
View Details
NAICS: 541330
New
SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT
Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water
GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for the Elsinore Valley Municipal Water District in California. The project seeks expertise in engineering, environmental services, surveying, geotechnical analysis, permitting, public outreach, and utility location. This opportunity is specifically open to Disadvantaged, Small, Women-Owned, and Minority-Owned Business Enterprises, as well as other certified small business entities. Interested firms must contact Charlie Brown via email to submit a qualifications package and request solicitation documents. The deadline for initial contact is August 7, 2026, with a final deadline to receive solicitation documents by 5pm PST on Friday, August 14, 2026. Relevant NAICS codes for this engagement include 541330, 237110, and 541490, among others.
GHD Inc.

POSTED

about 8 hours ago

DEADLINE

in 3 days
View Details
NAICS: 541330
New
Subcontracting Opportunity: City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3
Solicitation # 27-3214
Parametrix is seeking qualified subconsultants to provide civil engineering design and right-of-way services for the City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3. The project aims to address sewer system deficiencies in southwest Bend by extending a gravity trunk sewer line to unsewered areas, decommissioning existing pump stations in the Romaine Village area, and installing service laterals to transition properties from private septic systems to public sewer. The scope may also include roadway reconstruction, ADA curb ramp and curb design, and minor transportation improvements such as turn lanes or mini roundabouts. The project is funded by the Clean Water State Revolving Fund administered through the Oregon Department of Environmental Quality, with a total design and construction budget of 3,875,000 dollars. The procurement process is managed by the City of Bend, with a proposal deadline of September 29, 2026. Selection is based on technical and administrative capabilities, with the potential for interviews to influence final scoring. Key deliverables include a preliminary engineering report, a public outreach plan, and construction contract documents at 30, 60, 90, and 100 percent completion, culminating in record drawings. The City intends to advertise for construction services in Fall or Winter 2027. Parametrix is actively soliciting firms with recognized federal, tribal, state, local, or independent DBE certifications as part of a good faith effort to include small, minority-owned, women-owned, and veteran-owned businesses.
Parametrix

POSTED

about 8 hours ago

DEADLINE

in 17 days
View Details
NAICS: 541330
New
SLED
Design / Engineering for Microgrid System and DC fast charger
Solicitation # PE-64458-NONST-2027-000000037
The City of Decatur is soliciting proposals from qualified vendors to provide turnkey services for the design, bid assistance, and construction administration of a microgrid system. This project, located at the Decatur Police Department at 420 West Trinity Place in Decatur, Georgia, involves the installation of a solar photovoltaic generation system, a battery energy storage system, and a DC fast charger. The solicitation, identified as PE-64458-NONST-2027-000000037, was posted on September 11, 2026, with a response deadline of October 13, 2026. The project start date will be established following the award and coordination with Georgia Power. Interested parties may contact David Junger for further information regarding this SLED organization opportunity.
City of Decatur

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
International
Infrastructure - Request for Proposal - RFP FOR SITE AND GEOTECHNICAL INVESTIGATION CONSULTANT SERVICES FOR VARIOUS LOCATIONS – ELEVEN (11) SOUTH ALBERTA SCHOOL SITES
Solicitation # AB-2026-06239
The Infrastructure agency is seeking proposals from qualified consultants to provide site and geotechnical investigation services for eleven school sites located in South Alberta. This solicitation, identified as AB-2026-06239, focuses on essential land assessments and technical investigations to support the development of educational facilities in the Calgary region. Interested parties must submit their responses by the deadline of October 7, 2026, at 10:00 PM. The procurement process is being managed by Project Procurement Specialist Nkechi Nzewi, and further details regarding the submission process can be found through the official Alberta purchasing portal.
Infrastructure

POSTED

about 9 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541330
New
SLED
Civil/Roadway Engineering Design (100% Plans)
Department of Environmental Protection

POSTED

about 9 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541330
New
SLED
Professional Services for Pensacola Bay Unpaved Roads Project
Solicitation # 2027002
The Department of Environmental Protection of Florida is seeking qualified vendors to provide professional services for the Pensacola Bay Unpaved Roads Project under solicitation number RFSOQ 2027002, which was posted on July 7, 2026, with a response deadline of August 11, 2026, at 7:00 PM Eastern Time. The work falls under NAICS code 70171503 and is classified as a state, local, or educational government procurement, with performance location specified within the state of Florida. Interested parties must submit their responses by the stated deadline, and failure to file a formal protest within the timeframe outlined in section 120.57(3) of the Florida Statutes or to post the required bond or security will result in the waiver of rights to pursue any administrative proceedings under Chapter 120. All inquiries and submissions should be directed to Sabina Flanagan at sabina.flanagan@FloridaDEP.gov or by phone at 850-245-2187. Additional details regarding technical and administrative requirements are contained within the full solicitation document accessible via the provided online portal.
Department of Environmental Protection

POSTED

about 9 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541330
New
SLED
Engineering Services for the Mountain View Sanitary Pump Station Facility Rehabilitation
Solicitation # RFP 2417
The Township of Wayne, through its Division of Water and Sewer, is soliciting proposals from qualified professional engineering firms for the rehabilitation of the Mountain View Sewer Pump Station. The selected firm will be responsible for providing comprehensive design, bidding, and construction administration services to ensure the successful facility upgrade. This solicitation, identified as RFP 2417, was posted on September 11, 2026, with a response deadline of October 6, 2026, at 3:00 PM. Interested parties should direct inquiries to Nicole Lee, the Specifications Writer, via email or phone. The project is managed by the Purchasing Division of the Township of Wayne in New Jersey.
Purchasing Division

POSTED

about 11 hours ago

DEADLINE

in 25 days
View Details
NAICS: 541330
New
Federal
Specialized Technical Services (IT & Planning)
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
Federal
CryCam UV System Installation and Personnel Training
Brookhaven National Labor -Doe Contractor

POSTED

about 12 hours ago

DEADLINE

in 21 days
View Details
NAICS: 541330
New
Federal
Architectural & Engineering Design Services
Department Of Commerce Sspo

POSTED

about 12 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → W6QK Acc-Apg Cont Ct Tyad Ofc

Same awarding agency

NAICS: 484220
New
Federal
Heavy Material Transport to Tobyhanna Army Depot
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 327910
New
Federal
Supply of Alumina Zirconia Blasting Grit (Saint-Gobain)
Abrasive Product Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 327910
New
Federal
Sources Sought Brand Name Only Blasting Grit Alumina Zirconia
Solicitation # W25G1V0098069707
The Army Contracting Command, Tobyhanna Division, is conducting market research through a sources sought notice to identify capable providers for 50,000 lbs of Alumina Zirconia blasting grit. This is a brand name only requirement specifically for Saint-Gobain Ceramics Materials, part number MCA1360/60, featuring a blocky shape, 60 grit mesh size, and a true specific gravity of 4.3 Grams/CC. Interested firms must submit a capability package to the identified contract specialist via email within seven days of the notice. The requirement falls under NAICS code 327910 and product service code 5350, with performance located in Tobyhanna, Pennsylvania. The government retains sole discretion on whether to compete the requirement based on the responses received.
Abrasive Product Manufacturing

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 541380
Federal
Authorized Inspection Agency (AIA) for Unfired Pressure Vessels
Testing Laboratories and Services

POSTED

9 days ago

DEADLINE

in 5 days
View Details
NAICS: 541380
Federal
Unfired Pressure Vessel Inspections
Solicitation # W51AA126QA090
Solicitation W51AA126QA090 is a firm-fixed-price service contract for the inspection of unfired pressure vessels at Tobyhanna Army Depot in Pennsylvania. The requirement is a 100 percent small business set-aside and consists of a base year for a one-time structural integrity inspection to establish a baseline, followed by four option years for annual external visual inspections. The contractor is also responsible for performing unscheduled re-inspections necessitated by new installations or rework to existing systems. To be eligible, the contractor must be an accredited Authorized Inspection Agency holding a valid NB-369 Certificate of Accreditation and possess a minimum of five years of experience. The contractor must provide all necessary personnel, equipment, and supervision to execute the work, adhering to the Service Contract Act wage determinations for Monroe County. Security requirements include CMMC Level 1 Self certification and strict compliance with installation access and visitor restrictions at the depot. Performance will be evaluated by the government according to a Quality Assurance Surveillance Plan. Award will be based on the most advantageous offer, considering price and past performance, with the total evaluated price including all option years. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Testing Laboratories and Services

POSTED

9 days ago

DEADLINE

in 5 days
View Details
NAICS: 332710
Federal
Precision Metal Motor Components- sUAS Systems
Solicitation # MC090126
The Department of Defense, through the Tobyhanna Army Depot in Pennsylvania, is issuing a sources sought notice under solicitation MC090126 to identify capable manufacturers for precision-machined metal components. These components are essential for small Unmanned Aircraft Systems electric propulsion Brushless Direct Current motors, specifically covering seven CNC-machined parts across the 3115 and 2807 motor series, including shafts, rotor caps, bases, and magnet rings. The project requires expertise in handling tight tolerances and specialized technical processes such as knurling, passivation, anodizing, and electroplating. This request is intended for market research and planning purposes, seeking industry capability statements that include CAGE and UEI information, business size, and detailed manufacturing and quality control credentials. Interested parties must submit their responses by September 14, 2026. The procurement falls under NAICS code 332710 and is managed by the W6QK Acc-Apg Cont Ct Tyad Ofc, with primary coordination handled by Jessica McHugh.
Machine Shops

POSTED

11 days ago

DEADLINE

in 3 days
View Details
NAICS: 332215
Federal
Precision Tooling and Cutting Equipment SupplyThis subcontract, titled Precision Tooling and Cutting Equipment Supply, is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Tyad Ofc. The agreement focuses on the procurement of high-precision cutting tools, fixtures, and workholding devices specifically designed for micro-machining sUAS motor components. These tools must be fully compatible with BMX45-SY2 and Kobra 20SLY-X machines. The contract falls under NAICS code 332215 and is designated for performance in Tobyhanna, Pennsylvania. Posted on August 13, 2026, the primary objective is to ensure the availability of specialized equipment necessary for the precise manufacturing of small unmanned aircraft system motor parts.
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

30 days ago

DEADLINE

N/A
View Details
NAICS: 611430
Federal
CNC Operator and Maintenance Training ProgramThis subcontract involves the development and delivery of a technical training program designed for government personnel under the Department of Defense. The program focuses on the operation, programming, and preventive maintenance of CNC equipment to ensure technical proficiency and equipment longevity. The project is managed by the W6QK Acc-Apg Cont Ct Tyad Ofc and is categorized under NAICS code 611430. Performance of the training services will take place in Tobyhanna, Pennsylvania.
Professional and Management Development Training

POSTED

30 days ago

DEADLINE

N/A
View Details
NAICS: 332439
Federal
CNC Automation and Robotics IntegrationThis subcontract, titled CNC Automation and Robotics Integration, is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Tyad Ofc. The primary objective of the agreement is the supply and integration of robotic loading systems and specialized automation software. These technologies are intended to facilitate 24/7 unattended lights-out machining capabilities across all CNC machines. The project is categorized under NAICS code 332439 and is scheduled for performance in Tobyhanna, Pennsylvania. Posted on August 13, 2026, the contract focuses on enhancing operational efficiency and autonomy within the machining environment to ensure continuous production without the need for constant manual intervention.
Other Metal Container Manufacturing

POSTED

30 days ago

DEADLINE

N/A
View Details
NAICS: 811212
Federal
CNC Machine Installation, Calibration, and CommissioningThis subcontract, managed by the Department of Defense under the W6QK Acc-Apg Cont Ct Tyad Ofc, involves the on-site installation, calibration, and commissioning of 20 CNC machines at the Tobyhanna Army Depot in Tobyhanna, Pennsylvania. The primary objective of the project is to ensure that all machinery achieves full operational readiness and adheres to all required technical specifications. The contract is categorized under NAICS code 811212 and was posted on August 13, 2026. All performance activities are centered at the Tobyhanna facility to support the agency's operational requirements.
Computer and Office Machine Repair and Maintenance

POSTED

30 days ago

DEADLINE

N/A
View Details
NAICS: 333242
Federal
High-Precision CNC Machine Supply (Swiss Lathes)This subcontract with the Department of Defense involves the procurement of four Kobra 20SLY-X Swiss Lathes. These machines are designated for the high-precision turning of complex sUAS motor components, specifically those requiring multi-axis capability and tight tolerances. The contract is managed by the W6QK Acc-Apg Cont Ct Tyad Ofc and falls under NAICS code 333242. Performance of the contract is centered in Tobyhanna, Pennsylvania, with the official posting date recorded as August 13, 2026.
Semiconductor Machinery Manufacturing

POSTED

30 days ago

DEADLINE

N/A
View Details
NAICS: 333242
Federal
High-Precision CNC Machine Supply (Turning Centers)This subcontract with the Department of Defense involves the supply of 16 BMX45-SY2 Rapido CNC Turning Centers to support the manufacturing of sUAS motor components. These high-precision machines feature 4 to 5 axis machining capabilities, automated bar feeding, and robotic integration, specifically designed to enable unattended lights-out operations. The project is managed by the W6QK Acc-Apg Cont Ct Tyad Ofc and is categorized under NAICS code 333242. Performance for this contract will take place in Tobyhanna, Pennsylvania.
Semiconductor Machinery Manufacturing

POSTED

30 days ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS