Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Engraving System Manufacturer/Supplier

Open

Federal

Response Deadline11/23/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, managed by the Department of Defense through DLA DIST SAN JOAQUIN, seeks a manufacturer and supplier to provide a specialized engraving system for prime contractors fulfilling DLA supply contracts. The selected vendor will be responsible for delivering one engraving system unit of issue that adheres to the technical specifications for NSN 3417016002321. Additionally, the supplier must provide all necessary Material Safety Data Sheets and hazard warning labels for any hazardous materials included with the hardware. The project falls under NAICS code 333248 and will be performed in Tracy, California. Interested parties must submit their responses by November 23, 2026, following the posting date of November 11, 2026.

General Info

Supply one specialized engraving system for DoD in Tracy, California by November 2026.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

333248 - All Other Industrial Machinery Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E5-27-T-0513.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ENGRAVING SYSTEM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 11

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 09:00:00 AM PSTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a specialized engraving system for prime contractors delivering DLA supply contracts. Manufactures and supplies hardware to meet technical specifications for NSN 3417016002321. Provides Material Safety Data Sheets (MSDS) and hazard warning labels for hazardous materials. Delivers one engraving system unit of issue.

Similar Contracts

Same NAICS industry code

CUVETTE, BLOOD SAMPLE

Solicitation # SPE2DH-27-T-0524

This solicitation, issued by the DLA Troop Support Medical Supply Chain FSH, is a Request for Quotations for blood sample microcuvettes (NSN 6640-01-671-4541) designed for use with the HemoCue HB 201 Plus Analyzer for hemoglobin point of care testing. The requirement consists of multiple line items, with each unit of issue being a box containing 200 cuvettes. The products must be stored between 15 to 30 degrees Celsius (59 to 86 degrees Fahrenheit) and must have a shelf life of 24 months. A critical delivery constraint specifies that no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Delivery is set for 20 days after order, with the place of performance and destination located at Fort Campbell, Kentucky. The contract mandates strict labeling requirements, including the NSN, manufacturer, CAGE code, manufacture date, expiration or retest date, and contract or lot number. Packaging must adhere to Medical Marking Standard No. 1 and ASTM D3951 for non-hazardous materials, while hazardous materials must follow FED-STD-313 and TQ requirement IP025. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment, and the contract incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Roller Fairlead Manufacturing and SupplyThis subcontract involves the manufacture and supply of 13 specialized Roller Fairleads for prime contractors supporting Defense Logistics Agency supply contracts. The required items must match Oshkosh Defense LLC part number 2HA499 or DP Manufacturing Inc. part number 14644 and be produced in strict accordance with TDP Rev A Gen 1. The contractor is responsible for ensuring all units are packaged according to ASTM D3951 and RP001 standards, with marking and labeling adhering to MIL-STD-129. This Department of Defense project is categorized under NAICS code 333248, with the place of performance located in Albany.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Planer JacksThis subcontract involves the supply of 60 Planer Jacks to prime contractors supporting Department of Defense supply contracts through the Construction and Equipment MRO SVC I. The provider is responsible for manufacturing or sourcing hardware identified by NSN 3460005177989, ensuring all units strictly adhere to established technical specifications and are packaged according to DLA Packaging Requirements for Procurement RP001. The contract falls under NAICS code 333248, with the place of performance located at Robins Air Force Base. Interested parties must note the response deadline of November 23, 2026, following the posting date of November 11, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Chain Hoist Manufacturing and SupplyThis subcontract involves the manufacture and supply of 70 industrial chain hoists for prime contractors supporting Department of Defense supply contracts. The equipment must strictly match NSN 3950016843417 as specified in the DLA Master List. All units must be packaged and labeled according to MIL-STD-129 and palletized per RP001 before being delivered to the designated inspection point in Texarkana, Texas. The provider is required to maintain full compliance with DFARS Buy American regulations and established cybersecurity standards. This procurement falls under NAICS code 333248 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 23, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Extension Shafts (Blade Auger)This subcontract involves the procurement and delivery of 13 specialized extension shafts for blade augers to support prime contractors on DLA Troop Support Construction and Equipment projects. The equipment must strictly adhere to NSN 3040016787801 and Little Beaver Inc P/N 2X36-HSL specifications, while meeting all RA001 technical and quality standards as outlined in the DLA Master List of Technical and Quality Requirements. Managed under the Department of Defense, the contract falls under NAICS code 333248. The successful provider is responsible for the delivery of all 13 units to the designated DLA location, with performance associated with New Cumberland, Pennsylvania. The solicitation period opens on November 11, 2026, with a response deadline of November 23, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Roll Set, Roller Tube Expander SupplyThis subcontract involves the procurement of 31 units of the Roll Set, Roller Tube Expander, identified by NSN 3456006403579, to support prime contractors on DLA Troop Support projects. The selected provider is responsible for manufacturing or sourcing the tool sets and ensuring all items are packaged according to RP001 DLA Packaging Requirements for Procurement and ASTM-D-3951-90 standards. Managed by the Department of Defense in Norfolk, Virginia, the contract falls under NAICS code 333248. The solicitation was posted on November 11, 2026, with a response deadline of November 23, 2026, and performance is centered in Norfolk, Virginia.

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0432

Solicitation SPE8EE-27-T-0432 is a federal procurement for 31 units of chain hoists (NSN 3950-01-569-6969) for the DLA Troop Support Construction and Equipment Manufacturing and Contracting agency. This is a total small business set-aside under FAR 19.5, with a required delivery date of August 10, 2027. The contract specifies a delivery timeline of 166 days and requires FOB destination shipping to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to strict technical and quality standards, including source control drawings and specific reference drawings from Columbus McKinnon Corporation. Because these are critical application items, source inspection is mandatory. Quality assurance follows MIL-STD-1916 or ASQ H1331 sampling plans, with specific AQL levels for critical, major, and minor attributes. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and the prohibition of covered defense telecommunications equipment. Payment is processed electronically via the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0499

This procurement is for the supply of 151 filter bottles, identified by NSN 3610-00-510-7846, for the Department of Defense through DLA Troop Support Construction and Equipment MRO SVC I. The contract specifies a delivery lead time of 166 days after order, with an original required delivery date of April 26, 2027, and a need ship date of May 9, 2027. Delivery is FOB Destination, with the consignee being DLA Distribution San Diego. Inspection and acceptance will occur at the destination, governed by FAR 52.246-2. The contractor must adhere to strict technical and quality requirements found in the DLA Master List, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with RP001 and MIL-STD-129, with hazardous materials requiring labeling per DFARS 252.223-7001 and safety data sheets meeting 29 CFR 1910.1200(g). The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, NIST SP 800-171 cybersecurity requirements, and the use of the Wide Area WorkFlow system for electronic invoicing. Mercury-containing compounds are prohibited unless specifically exempted per NAVSEA 5100-003D.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

ENGRAVING SYSTEM

Solicitation # SPE8E5-27-T-0513

This procurement, solicitation number SPE8E5-27-T-0513, is for the acquisition of one engraving system (NSN 3417-01-600-2321) for the DLA Distribution San Joaquin. The equipment is identified as a commercial item from Tyrelltech, Inc. (P/N VLS3.60DT50KIT). The contract is issued under the First Destination Transportation program to reduce costs, with a required delivery date of April 2, 2027, and a need ship date of May 9, 2027. Delivery is set for FOB Origin, with inspection and acceptance occurring at the destination in Tracy, California. The contractor must adhere to strict packaging and marking standards, primarily following MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Specialized requirements include CMMC Level 2 self-assessment and the safeguarding of covered defense information. Administrative compliance requires the use of the Wide Area WorkFlow system for invoicing and payment. The contract incorporates various FAR and DFARS clauses, including restrictions on covered defense telecommunications equipment, the Buy American and Balance of Payments Program, and specific prohibitions regarding hexavalent chromium and hazardous material disposal.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

ENGRAVING SYSTEM

Solicitation # SPE8E5-27-T-0500

Solicitation SPE8E5-27-T-0500 is a fixed-price procurement issued by the Defense Logistics Agency for the acquisition of two engraving systems, identified by NSN 3417-01-413-9905. The contract specifies a delivery timeline of 166 days after order, with an original required delivery date of February 6, 2027, and a need ship date of May 9, 2027. Delivery is established as FOB Origin, with the final destination for inspection and acceptance being DLA Distribution Cherry Point in North Carolina. The procurement incorporates strict technical and quality standards, including packaging and marking requirements per ASTM-D3951-15 and MIL-STD-129. It is subject to various federal and defense regulations, including DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.204-7018 regarding the prohibition of certain telecommunications equipment. While the solicitation is not a small business set-aside, it requires offerors to provide representations regarding telecommunications services and comply with the Buy American and Balance of Payments Program. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

WINCH, DRUM, HAND OPERAT

Solicitation # SPE8EE-27-T-0335

Solicitation SPE8EE-27-T-0335, issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, is for the procurement of 16 hand-operated drum winches under NSN 3950015954485. The requirement specifies a delivery timeline of 167 days after order, with an original required delivery date of March 21, 2027, and a need ship date of April 26, 2027. Delivery is established as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List of Technical and Quality Requirements take precedence. Each shipment must include an EPA approved Consumer Information Sheet. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The contract incorporates various federal and defense clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. All quotes are to be submitted via the DLA Internet Bid Board System.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

in about 24 hours

Supply, delivery, commissioning and provide training for One Set of Wave Making Machine with 2 units of Sector Carrier Pistons and One Unit of Static Absorbing Beach to School of Civil and Environmental Engineering

Solicitation # Doc5980334902

Nanyang Technological University is seeking proposals for the supply, delivery, commissioning, and training for one set of Wave Making Machine, including two sector carrier pistons and one static absorbing beach, for the School of Civil and Environmental Engineering in Singapore. Interested parties must download the specification documents via the sourcing event to identify the primary contact person and any required site briefings. All proposals must be submitted exclusively through the sourcing event by selecting submit entire response to avoid disqualification. Bidders should be aware that the currency cannot be changed after submission and the default opportunity amount of 500 USD should be ignored. The deadline for responses is November 19, 2026, at 15:59.

Nanyang Technological University

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

Military Grade Packaging and Shipment MarkingThis subcontract for Military Grade Packaging and Shipment Marking supports prime contractors on projects for the Department of Defense agency DLA Distribution San Joaquin. The scope of work involves providing specialized packaging and marking for 38 units to be delivered as FOB Origin shipments from Tracy, California. All work must be performed using industrial marking equipment and military-specification materials to ensure full compliance with rigorous federal standards. Key technical requirements include executing packaging according to MIL-STD-2073-1E Preservation Method 31 and applying shipment markings in accordance with MIL-STD-129. Additionally, the contractor is responsible for ensuring that all property identification adheres to MIL-STD-130N standards. The opportunity was posted on November 12, 2026, with a response deadline of November 23, 2026, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

DEADLINE

Fabrication of Identification Markers (NSN 7690-01-714-7022)This subcontract involves the fabrication of 38 identification markers for prime contractors supporting DLA Distribution San Joaquin projects in Tracy, California. The manufacturing process must strictly adhere to Basic Drawing NR 19207 12719162, Part Piece Number 12719162-006, and TDP Rev A Gen 1. The contractor is required to maintain rigorous quality standards, performing sampling per MIL-STD-1916 or ASQ H1331 with a requirement of zero non-conformance according to MIL-STD-105/ASQ Z1.4. Additionally, the project mandates full compliance with MIL-STD-130N and DFARS 252.204-7012 regulations for the delivery of the completed markers.

POSTED

DEADLINE

Supply of Commercial Space DehumidifiersThis subcontract involves the supply of 462 commercial movable floor-type space dehumidifiers to prime contractors supporting DLA Distribution Red River. The required units must feature 115V AC motors, automatic humidistats, 8-quart containers, and a minimum condensing capacity of 40 pints per day. Each unit must be accompanied by manufacturer commercial manuals for operation and repair. The contract mandates strict adherence to packaging and labeling standards, specifically ASTM D3951/RP001 and MIL-STD-129. Delivery is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement is managed under the Department of Defense through DLA Distribution San Joaquin under NAICS code 423440.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E5-27-T-0549

Solicitation SPE8E5-27-T-0549 is a fixed-price procurement issued by DLA Dist San Joaquin for 38 units of identification markers, identified by NSN 7690-01-714-7022. The items must be manufactured in accordance with Basic Drawing NR 19207 12719162 and Part Piece Number 12719162-006. Delivery is specified as FOB Origin, with an original required delivery date of April 8, 2027, and a need ship date of May 9, 2027. The items are to be delivered to the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for shipment marking, and MIL-STD-130N for property identification. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-non-conformance requirement for acceptance under MIL-STD-105/ASQ Z1.4. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including cybersecurity reporting under DFARS 252.204-7012 and a price evaluation preference for HUBZone small businesses. Quotations are due by November 23, 2026.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

DEHUMIDIFIER, SPACE

Solicitation # SPE8E8-27-T-0694

Solicitation SPE8E8-27-T-0694 is for the procurement of space dehumidifiers under the First Destination Transportation program for the DLA Distribution Red River. The requirement consists of two line items totaling 462 units (166 for CLIN 0001 and 296 for CLIN 0002) with a delivery schedule of 166 days after date of order. The technical specifications require movable floor-type units capable of condensing at least 40 pints of water daily at 80 degrees Fahrenheit with 60 percent relative humidity. Equipment must feature a maximum height of 24 inches, occupy no more than 270 square inches of floor space, and utilize a 115-volt AC single-phase compressor motor. Additional requirements include an automatic humidistat, automatic overflow control, an indicator light, and a moisture container with a minimum capacity of 8 quarts. Each unit must be accompanied by a manufacturer's commercial manual covering operation, service, maintenance, and repair. The contract mandates destination inspection and acceptance per FAR 52.246-1. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. The procurement is subject to the Buy American and Balance of Payments Program and includes restrictions on covered defense telecommunications equipment. Administrative requirements specify the use of the Wide Area WorkFlow system for invoicing and payment requests. This is not a small business set-aside, and offerors must maintain updated representations and certifications in the System for Award Management.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Additive Manufacturing Filament SupplierThis subcontract, managed by the Department of Defense through DLA DIST SAN JOAQUIN, requires the supply of 93 units of specialized additive manufacturing filament. The supplier is responsible for manufacturing or sourcing material that strictly adheres to NSN 9330017089373 specifications to support prime contractors fulfilling DLA supply contracts. The contractor must ensure all deliverables meet rigorous federal standards, including commercial packaging per ASTM D3951 and marking and labeling requirements according to MIL-STD-129. Additionally, the supplier must maintain full compliance with DFARS 252.225-7001 Buy American requirements. Performance for this contract is centered in Tracy, California.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

Supply of Extruded Aluminum Alloy 6061-T6 Structural AnglesThis subcontract involves the supply of 1,119 feet of extruded aluminum alloy 6061-T6 structural angles to support prime contractors fulfilling DLA supply contracts. The materials must be provided in 10 to 12 foot lengths and strictly adhere to SAE AMS10133-2004, SAE AMS-QQ-A-200/8A, and ASTM B666/B666M-20 standards. All deliverables require continuous identification markings in accordance with MIL-STD-2073-1E, as well as Mill-Material Certification and a QSLD listing. Managed by the Department of Defense through DLA DIST SAN JOAQUIN, the contract falls under NAICS code 331210 with the place of performance located in Tracy, California. The solicitation was posted on November 11, 2026, with a response deadline set for November 23, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Heavy Phosphate Coating ServicesThis subcontract opportunity involves providing specialized chemical finishing services for prime contractors supporting DLA Troop Support Construction and Equipment projects. The scope of work requires the application of heavy phosphate coatings to depth gages using chemical baths and processing equipment to ensure all finished components meet strict military corrosion and wear specifications. All work must be performed in accordance with MIL-DTL-16232 and Finish Series 5.3 of MIL-STD-171. The project is managed under the Department of Defense through DLA Dist San Joaquin and will be performed in Tracy, California. Interested parties should note that the response deadline is November 23, 2026. The requirement falls under NAICS code 332813, focusing on the delivery of high-precision components that adhere to rigorous military standards.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Vernier Depth Gage ManufacturingThis subcontract involves the manufacture and supply of three Vernier Depth Gages, identified by NSN 012599105, for prime contractors supporting DLA Troop Support Construction and Equipment projects. The scope of work includes the fabrication of the gage body and vernier scale, the performance of First Article Testing, and strict adherence to the DLA Master List of Technical and Quality Requirements. Notably, the use of additive manufacturing is explicitly prohibited for this production. Managed by the Department of Defense through DLA DIST San Joaquin, the contract falls under NAICS code 333241. Performance of the contract is designated for Tracy, California. Interested parties must have responded by the deadline of November 23, 2026.

Food Product Machinery Manufacturing

POSTED

DEADLINE

Nickel-Copper Alloy (QQ-N-288 Comp. E) SupplierThis subcontract involves the supply of raw Nickel-Copper Alloy QQ-N-288 Comp. E material to prime contractors supporting projects for the Department of Defense via DLA Distribution San Joaquin. The supplier is responsible for sourcing and certifying that all alloy stock meets specific QQ-N-288 Comp. E standards, which includes providing detailed material test reports covering both physical properties and chemical composition. Performance for this contract takes place in Tracy, California, under NAICS code 331319. Due to the nature of the defense application, the supplier must maintain strict compliance with ITAR and EAR regulations regarding the transfer of materials. The solicitation was posted on November 11, 2026, with a response deadline of November 23, 2026.

Other Aluminum Rolling and Drawing

POSTED

DEADLINE

Nickel-Copper Alloy Valve Disk ManufacturingThis subcontract involves the casting and precision machining of two 8-inch valve disks using Nickel, Copper Alloy QQ-N-288 Comp. E for projects supporting DLA Distribution San Joaquin. The work must be performed using industrial casting furnaces and precision machining tools, with a strict prohibition on the use of additive manufacturing. Finished products must be delivered in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Eligible contractors must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. Additionally, the provider must be part of the US/Canada Joint Certification Program to satisfy ITAR and EAR requirements. The place of performance is located in Tracy, California, under NAICS code 331511.

POSTED

DEADLINE

Paint Product Thinner SupplierThis subcontract, managed by the Department of Defense through DLA DIST SAN JOAQUIN, seeks a supplier to provide specialized paint thinner for prime contractors. The required chemical thinner must be capable of reducing the viscosity of phenol formaldehyde spar varnishes as well as styrenated alkyd resin enamels and medium oil. Performance of the contract will take place in Tracy, California, under NAICS code 325180. The supplier is responsible for delivering the physical product along with associated Safety Data Sheets that comply with 29 C.F.R. 1910.1200 and Hazardous Communication Standard labels. All deliverables must strictly adhere to MIL-STD-129 marking requirements and MIL-STD-2073-1E packaging standards. The solicitation was posted on November 11, 2026, with a response deadline of November 17, 2026.

Other Basic Inorganic Chemical Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS