Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Environmental and Mechanical Testing Services

Active

Federal

Response Deadline12/31/2027, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Environmental and Mechanical Testing Services supports Air Force 416 SCMS projects by verifying compliance for prime contractors. The scope of work involves executing approved Qualification Test Plans, specifically focusing on environmental and mechanical stress testing in accordance with Drawings T320A44 and T363A98. The contractor is responsible for utilizing precision measurement equipment and environmental chambers to conduct these tests, while also facilitating on-site government witnessing of the processes. The final deliverables for this engagement include a certified Test Report and a verified qualification article. Managed by the Department of Defense under agency FA8122 Afsc Pzaab, the work is performed in S Coffeyville, Oklahoma. The contract falls under NAICS code 541380 and has a response deadline of December 31, 2027.

General Info

Environmental and mechanical testing services for Air Force projects in Coffeyville, Oklahoma.

Agency

Department Of Defense → FA8122 Afsc Pzaab

NAICS

541380 - Testing Laboratories and Services

Place of Performance

S Coffeyville, OK, 73145, USA

Set-Aside

NONE

Documents

This scope was carved out of F16_AN_APG68_Radar_Dual_Transmitter_NSN5998012031936_PN77R025G01.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

F16_AN_APG68_Radar_Dual_Transmitter_NSN5998012031936_PN77R025G01

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJan 20

subcontract

Response DeadlineDec 31

Submission deadline

Response Deadline

12/31/2027, 05:00:00 AM UTCin about 1 year

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8122 Afsc Pzaab

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8122 Afsc Pzaab

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs verification of compliance for prime contractors on Air Force 416 SCMS projects. Executes approved Qualification Test Plans including environmental and mechanical stress testing per Drawings T320A44 and T363A98. Utilizes environmental chambers and precision measurement equipment. Facilitates on-site government witnessing of testing processes. Delivers a certified Test Report and verified qualification article.

Similar Contracts

Same NAICS industry code

Third-Party Construction Materials Testing & Inspection

University of Massachusetts System

POSTED

about 8 hours ago

DEADLINE

Campus Consulting – Construction Materials Testing And Special Inspection Services

Solicitation # 20261026019

California State University, Chico

POSTED

about 13 hours ago

DEADLINE

MIL-STD Environmental Testing ServicesThe MIL-STD Environmental Testing Services subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves performing critical environmental qualification testing for prime contractors. The scope of work focuses on aircraft interior decontamination projects for the Joint Project Manager for CBRN Special Operations Forces. The selected provider will conduct chamber evaluations and environmental stress testing, utilizing temperature, humidity, and vibration chambers to verify equipment survival in austere environments. All testing activities must strictly adhere to MIL-STD-810H standards, with the final deliverable being comprehensive environmental qualification test reports. This opportunity falls under NAICS code 541380 and is designated for performance in Abell. The response deadline for this requirement is November 24, 2026.

POSTED

about 15 hours ago

DEADLINE

Specialized Aerospace Quality Inspection/Certification

Ok DLA Aviation At Oklahoma City

POSTED

about 15 hours ago

DEADLINE

in about 17 hours

AMS Designated Laboratory Meat Testing Services (ADL)

Solicitation # 12-1NTS-26-R-0002

The USDA Agricultural Marketing Service (AMS) is soliciting proposals under solicitation 12-1NTS-26-R-0002 to establish AMS Designated Laboratories (ADLs) for microbiological and fat testing of meat, poultry, egg, and aquatic products. This effort supports the National School Lunch Program and other federal nutrition assistance programs to ensure compliance with Federal Purchase Program Specifications. The government intends to award a Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract with a base period from April 1, 2027, through March 31, 2028, and four subsequent option periods, extending the total performance period to March 31, 2032. The contract has a guaranteed minimum of 10,000 dollars and a maximum ceiling of 15,000,000 dollars. This procurement is specifically set aside for Women-Owned Small Businesses (WOSB). Selected laboratories must maintain ISO/IEC 17025:2017 accreditation and utilize approved methods from FSIS MLG, AOAC, or AOCS. Key responsibilities include conducting analyses for Aerobic Plate Count, Total coliforms, Generic E. coli, and Salmonella, as well as providing sampling procedures and shipping supplies to vendors. Contractors are required to provide timely reporting of results, daily status reports, and statistical process control data. Proposals will be evaluated based on Best Value, considering technical capabilities, past performance with at least two references from the last five years, and price. All submissions must be uploaded in PDF format via WBSCM by the deadline of November 20, 2026.

POSTED

about 15 hours ago

DEADLINE

Granite Surface Plate Calibration and lapping - with Q&As

Solicitation # W519TC27QA007

Solicitation W519TC27QA007, issued by the Army Contracting Command - Rock Island, seeks an ISO 17025 accredited vendor to provide annual inspection, calibration, and lapping repair for granite surface plates at the Rock Island Arsenal Joint Manufacturing and Technology Center. The requirement is structured as a firm-fixed-price contract consisting of a base year from February 2, 2027, to February 1, 2028, with four subsequent option years, for a total potential duration of five years and six months. All work must be performed in accordance with ASME B89.3.7 and ANSI Z-540-1 standards, with calibrations traceable to NIST. The contract utilizes a hybrid pricing model where the annual inspection and calibration of all plates are firm-fixed-price lots, while lapping repairs are priced separately via an hourly labor rate and must be authorized by the Contracting Officer or COR. Estimated travel costs should be included in the firm-fixed pricing, though actual costs will be billed after service per Joint Travel Regulation rates. Deliverables include calibration stickers for each plate and a Service Acceptance Report submitted within three business days of completion. Offerors must submit their proposals by November 9, 2026, including a signed concurrence of the Scope of Work and documentation of their technical capabilities.

POSTED

about 15 hours ago

DEADLINE

B--METAGENOMICS & TRANSCRIPTOMIC SERVICES

Solicitation # 140G0226Q0145

Solicitation 140G0226Q0145 is a firm-fixed-price Blanket Purchase Agreement (BPA) issued by the USGS OAG Denver Acquisition Branch to provide next-generation sequencing (NGS) services for the Upper Midwest Water Science Center’s Michigan Bacteriological Research Laboratory. The scope of work includes shotgun metagenomics, whole genome sequencing (WGS), and RNA-sequencing (RNA-seq) to support research on bacterial pathogens, antibiotic resistance, and microbial ecology. The contract utilizes technologies such as Illumina, AVITI, Oxford Nanopore, and PacBio. The BPA has a total not-to-exceed value of $300,000.00 and a five-year period of performance from September 28, 2026, to September 27, 2031, with specific performance periods defined by individual call orders. This opportunity is set aside for Women-Owned Small Businesses (WOSB) and Economically Disadvantaged Women-Owned Small Businesses (EDWOSB). Award decisions are based on the most advantageous offer, where non-priced technical factors—specifically past performance, key personnel qualifications, and the capability to provide the required sequencing deliverables—are significantly more important than cost. Deliverables must meet strict quality standards, including a 75% quality score over 30 per sequencing run, and be delivered via secure FTP or external hard drive with comprehensive technical metadata. Payments are processed electronically through the Treasury’s Invoice Processing Platform (IPP), and the place of performance is located in Lansing, Michigan.

Ofc Of Acquisition Grants-Denver

POSTED

about 15 hours ago

DEADLINE

W684Q-264141 - Laboratory Testing - RFSO

Solicitation # WS5609648156

The Government of Canada, through the Department of Public Works and Government Services, has issued solicitation WS5609648156 for laboratory testing services. This federal opportunity, identified as W684Q-264141, falls under NAICS code 541380 and specifies that the place of performance will be located in British Columbia, Canada. The solicitation was posted on October 27, 2026, with a response deadline set for November 4, 2026, at 7:00 PM. Interested parties may coordinate with the primary contracting authority, Nicki Arrieta, to facilitate their submissions.

Department of Public Works and Government Services

POSTED

about 22 hours ago

DEADLINE

Ultrasonic Rail Testing and Material CertificationThis subcontract for Ultrasonic Rail Testing and Material Certification involves providing independent third-party testing and certification services for prime contractors working on Maryland Transit Administration projects. The selected vendor must be an MTA-approved certified independent testing laboratory capable of performing 100 percent in-line ultrasonic testing across the full length of rails. This technical process requires the use of a computerized DAPCO 300 testing unit or an approved equivalent to ensure material integrity. The contractor is responsible for delivering formal certified test reports and certificates of compliance to verify that all rail materials meet the necessary standards. Interested parties must submit their responses by November 16, 2026, under NAICS code 541380.

Maryland Transit Administration

POSTED

DEADLINE

Concrete Field TestingThis subcontract opportunity involves providing quality assurance testing for prime contractors working on California Department of Transportation highway projects. The primary scope of work focuses on conducting field testing of concrete pours to verify strength and ensure strict adherence to mix compliance standards. The selected provider is responsible for delivering certified test reports to document these findings. To qualify for this engagement, the contractor must employ a certified ACI Grade 1 concrete field-testing technician. Interested parties must submit their responses by December 3, 2026, in accordance with the solicitation posted on October 26, 2026. The project falls under NAICS code 541380.

California Department of Transportation

POSTED

DEADLINE

in about 1 month

Laboratory Ventilation Testing and CertificationThis subcontract opportunity is for Laboratory Ventilation Testing and Certification to support prime contractors on San Francisco Unified School District facility projects. The selected provider will perform specialized testing and official certification of both new and existing bio-safety cabinets and laboratory fume hoods. Using smoke generators and airflow velocity meters, the contractor must verify proper containment and airflow, ultimately providing official certification labels and detailed reports for every unit tested. The project is managed by the San Francisco Unified School District Facilities Design and Construction Department and will be performed in San Francisco, California. Qualified bidders must possess certification authority recognized by local and California state agencies. The solicitation was posted on October 26, 2026, with a response deadline of November 12, 2026.

San Francisco Unified School District Facilities Design and Construction Department

POSTED

DEADLINE

Vehicle Compliance Testing & InspectionThe Vehicle Compliance Testing and Inspection subcontract involves providing essential legal testing and safety inspections for prime contractors delivering vehicles to School District 68 Nanaimo-Ladysmith in British Columbia, Canada. The scope of work includes conducting safety inspections, weight distribution checks, and legal compliance certifications from the point of initial receipt through final acceptance. These services must be performed using appropriate weigh scales and safety tools to ensure all requirements mandated by law under Section 3.3 are met. The selected provider is responsible for delivering all necessary inspection reports and certifications to verify compliance. This opportunity is categorized under NAICS code 541380 and is associated with the Province of British Columbia. Interested parties should note the response deadline of November 26, 2026.

School District 68 Nanaimo-Ladysmith

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8122 Afsc Pzaab

Same awarding agency

F118 Front Frame Remanufacture

Solicitation # FD20302600592

POSTED

DEADLINE

Precision Aerospace Component RemanufacturingThe Precision Aerospace Component Remanufacturing subcontract involves providing specialized maintenance and repair services for F110 Motional Transducer projects supporting the Air Force Sustainment Center. The scope of work includes the disassembly, cleaning, and replacement of internal components, specifically focusing on low and medium levels of repair such as the replacement of connectors and core or shaft assemblies to deliver fully remanufactured units. To execute this contract, the provider must maintain a clean-room environment and hold several critical certifications, including AS 9100, NATO AQAP2070, and CMMC. Additionally, all units must feature UID 2D data matrix marking. This Department of Defense effort is categorized under NAICS code 811210, with a response deadline set for November 23, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Aerospace Electrical Connector SupplierThis subcontract opportunity with the Department of Defense, specifically the Air Force Sustainment Center, involves the sourcing and delivery of high-reliability, aerospace-grade electrical connectors for F110 Motional Transducer projects. The selected supplier will provide components compatible with the F110 weapon system, ensuring all parts meet strict aerospace standards for prime contractors. To ensure quality and security, the contractor must maintain AS 9100 certification and provide comprehensive Supply Chain Risk Management documentation to mitigate the risk of counterfeit parts. Interested parties must respond by November 23, 2026, for this requirement categorized under NAICS code 334417, with performance taking place in zip code 73145.

Electronic Connector Manufacturing

POSTED

DEADLINE

F110 Motional Transducer Core and Shaft Assembly SupplierThis subcontract involves the manufacture and delivery of specialized internal components for the Air Force Sustainment Center F110 Motional Transducer remanufacture projects. The supplier is responsible for providing certified, flight-ready core assemblies, shaft assemblies, and major subassemblies corresponding to specific manufacturer part numbers. The contract is managed under the Department of Defense and requires strict adherence to quality and security standards, including AS 9100, ISO 9001:2000, and a Counterfeit Prevention Plan. Performance will take place in the 73145 zip code area, with a response deadline set for November 23, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

F110 Motional Transducer Remanufacture

Solicitation # FA812227RB002

The United States Air Force, through the Air Force Sustainment Center at the Oklahoma City Logistics Center, is soliciting the remanufacture of the F110 Motional Transducer under solicitation FA812227RB002. This requirement is structured as a Firm-Fixed Price, Indefinite Delivery Requirements Type contract consisting of a one-year basic period and four one-year option periods. The scope of work includes both medium and low levels of repair, involving the replacement of core and shaft assemblies, connectors, and major subassemblies. Due to the specialized nature of the equipment, the government anticipates a sole source award to an authorized distributor of a qualified source, and all offerors must be approved sources in accordance with FAR 52.209-1. Key administrative and technical requirements include the use of the Wide Area WorkFlow system for electronic invoicing and the mandatory application of unique item identifiers using two-dimensional data matrix symbology. Offerors must comply with stringent quality standards, including ISO 9001:2000, AS 9100, and NATO AQAP2070, and must provide a Cybersecurity Maturity Model Certification unique identifier. The acquisition is unrestricted, though a 10 percent price evaluation preference is granted to HUBZone small business concerns. Deliverables include various reporting requirements such as Commercial Asset Visibility, Government Property Inventory, and Supply Chain Risk Management plans. Inspection and acceptance will occur at the DLA Distribution Depot Oklahoma at Tinker AFB.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Aerospace Component Cleaning and Inspection ServicesThe Aerospace Component Cleaning and Inspection Services subcontract involves providing specialized industrial cleaning and non-destructive testing for prime contractors supporting AFSC Pzaab projects at Tinker AFB. The scope of work focuses on the cleaning of fuel system components and the execution of inspections for fatigue, wear, or cracks utilizing Dye Penetrant or Magnetic Particle equipment in strict accordance with AF Technical Orders. To qualify for this engagement, the service provider must maintain ISO 9001:2000 certification. Key deliverables include the return of cleaned components accompanied by comprehensive inspection reports. This opportunity is categorized under NAICS code 332999 and is managed under the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

F108-201 Fuel Pump Component SupplierThe F108-20 Fuel Pump Component Supplier subcontract, issued by the Department of Defense for AFSC Pzaab at Tinker AFB, involves the procurement and delivery of certified aircraft-grade components. The scope of work focuses on supplying new OEM or approved equivalent long-lead parts, specifically internal pump seals, bearings, gears, or housings compatible with part numbers 708400-1 through 708400-5. Strict adherence to technical and logistical standards is required, including Item Unique Identification compliance and Mil-Std-129R packaging and marking. This opportunity falls under NAICS code 336413, with a response deadline set for November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

F108-201 Main Fuel Pump RemanufactureThis subcontract involves the full-cycle remanufacture of F108-201 Main Fuel Pumps for prime contractors supporting Department of Defense projects at AFSC Pzaab, Tinker AFB. The scope of work includes the disassembly of pump assemblies, precision cleaning, and the inspection and remanufacturing of components to ensure they meet original technical specifications. Each completed pump must be delivered with a Certificate of Conformance. To qualify for this project, the provider must operate an FAA Part 145 rated facility for CFM56-2B engine components and utilize test equipment that is ANSI/NCSL 2340-1 compliant. The opportunity was posted on October 16, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

Remanufacture F108-201 MAIN FUEL PUMP NSN: 2915-01-241-9239PN

Solicitation # FD20302401595

The United States Air Force, specifically the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research via a Sources Sought Synopsis to identify potential sources for the remanufacture of F108-201 Main Fuel Pumps (NSN: 2915-01-241-9239PN). The estimated requirement is 13 units per year. The goal of this effort is to determine the best acquisition strategy, including whether the requirement can be a Small Business Set-Aside or broken out by airframe. This is not a formal solicitation, and no funds are currently available for award. The selected contractor must provide all labor, materials, and equipment to disassemble, clean, inspect, and remanufacture the pumps to a condition as close as possible to their original life expectancy. Key requirements include maintaining an FAA Part 145 rated facility for CFM56-2B engine components and adhering to ISO 9001:2000/ANSI/ASQC Q92 quality standards. The contractor will be responsible for supply chain management, logistics, and the procurement of long-lead parts. Strict adherence to Mil-Std-129R for packaging and marking, as well as IUID compliance, is required. Additionally, the contractor must follow Nuclear Weapon Related Materiel management requirements per AFI 20-110 and maintain measuring test equipment according to ANSI/NCSL 2340-1.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

F108 Outer Nozzle Support Repair

Solicitation # FA812226RB002

Solicitation FA812226RB002 is a Department of Defense requirement for F108 Outer Nozzle Support Repair. Managed by the AFSC PZAAB agency, the project is categorized under NAICS code 336412 and will be performed at Tinker Air Force Base in Oklahoma. The solicitation was posted on October 16, 2026, with a response deadline of October 30, 2026. Primary coordination for this effort is handled by Brock May, with Bradley Bonsall serving as the secondary point of contact.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Specialized Container Hardware SupplyThis subcontract, titled Specialized Container Hardware Supply, involves the provision of industrial-grade hardware components for F108 shipping and storage containers. Supporting prime contractors on Department of the Air Force AFLCMC projects, the scope of work includes the delivery of bulk fasteners, heavy-duty latches, document containers, cleats, skids, and rub bands. All supplied components are required to meet or exceed specific government drawing requirements to ensure operational standards are maintained. Managed under the Department of Defense agency FA8122 Afsc Pzaab, the contract falls under NAICS code 332510. The primary objective is the delivery of these essential hardware components to the prime integrator, with the place of performance located in zip code 73145.

Hardware Manufacturing

POSTED

DEADLINE

Marine-Grade Plywood Container Shell FabricationThis subcontract involves the fabrication of primary structures for F108 shipping and storage containers intended for Department of the Air Force AFLCMC projects. The scope of work requires the cutting and assembly of container shells using fiberglass coated marine-grade plywood, strictly adhering to provided design drawings. To ensure environmental and durability standards are met, a specific fiberglass coating must be applied to all shells. The project is managed under the Department of Defense and falls under NAICS code 321999. A critical requirement for the contract is the successful completion and approval of a First Article Inspection before full delivery of the completed fiberglass-coated plywood container shells.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Environmental and Performance Qualification Testing

FA8122 Afsc Pzaab

POSTED

DEADLINE

in about 1 year

ERHS Tinian Lab Services (QAQC)

Solicitation # FA502526RB002

FA5025 356 Eceg Pk

POSTED

CLOSED

H165--Nuclear Medical Physicist and MRSE Services 36C255-26-AP-0874 Robert J. Dole VAMC, Wichita, KS 67218

Solicitation # 36C25526Q0130

255-NETWORK Contract Office 15 (36C255)

POSTED

CLOSED

Quality Testing and Inspection Services (Subcontractor Support)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Environmental laboratory specimen sampling required for compounding pharmacies.

Solicitation # 36C24726Q0220

247-NETWORK Contract Office 7 (36C247)

POSTED

CLOSED

GENOTYPING AND GENETIC MONITORING OF MOUSE SAMPLES.

Solicitation # NIAID-NOI-26-2279499

National Institutes Of Health Niaid

POSTED

CLOSED

Surveillance of severe influenza-associated encephalopathy and related complications in US children

Solicitation # SS-75D301-2026

CDC Office Of Acquisition Services

POSTED

CLOSED

Aerospace Component Quality Assurance & Testing

DLA Aviation Oklahoma City

POSTED

DEADLINE

Government First Article Testing (GFAT) Services

Defense Logistics Agency

POSTED

DEADLINE

B533--Hemodialysis Water Analysis | Wilkes Barre VA Medical Center

Solicitation # 36C24426Q0129

244-NETWORK Contract Office 4 (36C244)

POSTED

CLOSED

H146--Legionella Testing Sampling Service at the Minneapols VA Health Care System

Solicitation # 36C26326Q0282

Network Contract Office 23 (36C263)

POSTED

CLOSED

Quality Management System (QMS) and Compliance Support

Navsup Weapon Systems Support Mech

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS