This Government Contract opportunity from California was posted on August 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Environmental Compliance and Certification Services

Closed

State & Local

Submission Closed09/03/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a fee-for-service subcontracting opportunity to provide comprehensive asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Warehouse, Warehouse Storage Area, and Gymnasium. Specifically, the project may require the removal and disposal of approximately 2,000 square feet in the warehouse, 1,600 square feet in the storage area, and 600 square feet in the gymnasium. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Interested offerors must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification form, proof of insurance, and three references for projects of similar scope by October 21, 2026. Award selection will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards and Department of Labor wage determinations for Grundy, Kendall, and Will counties. Selected contractors must adhere to strict records management, privacy breach notification, and information security requirements. Invoicing is to be submitted on a weekly or bi-weekly basis and must include a purchase order number and detailed pricing breakdowns. This opportunity is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone certified firms.

POSTED

DEADLINE

First Article Testing and Inspection (NDT)This subcontract, issued by the Department of Defense through DLA Mechanicsburg, involves performing non-destructive First Article Testing and inspection for prime contractors. The scope of work requires conducting NDT on a single sample unit utilizing methods such as X-ray, ultrasonic, dye penetrant, or magnetic particle inspection. The selected provider must develop and submit test procedures in accordance with the Contract Data Requirements List. To qualify, personnel must hold ASNT Level II or III certification. The final deliverables for this engagement include the approved test procedures and a comprehensive First Article Test/Inspection report. The solicitation was posted on October 19, 2026, with a response deadline of November 16, 2026, under NAICS code 541380.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Hardware Inspection and Quality ValidationThe Hardware Inspection and Quality Validation subcontract, issued by the Department of Defense through DLA Mechanicsburg, involves providing independent inspection and quality assurance testing for prime contractors. The selected provider will perform technical acceptability testing for detector accuracy using specialized calibration tools and testing rigs. Key deliverables include the submission of detailed inspection reports and formal certifications of technical acceptability. To qualify, contractors must hold recognized quality certifications such as ISO 9001 or AS9100 and are required to maintain all inspection records for 365 calendar days following delivery. This opportunity falls under NAICS code 541380, with a response deadline set for November 6, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports US Army 105mm M20 artillery projects through independent quality validation for prime contractors. The selected provider will perform dimensional inspections of rough machined parts based on drawing 12591138, Rev B, utilizing precision tools such as CMM, calipers, and micrometers. Key responsibilities include verifying First Article Approval, coordinating with government inspection points, and delivering detailed inspection reports. The project is managed by the Department of Defense under agency W6QK Acc Wva and will be performed in Watervliet, New York. To be eligible, contractors must hold ISO 9001 or AS9100 certification. The solicitation was posted on October 19, 2026, with a response deadline of November 4, 2026, falling under NAICS code 541380.

POSTED

DEADLINE

26RS0012 - Water Testing and Analysis Services

Solicitation # 26RS0012

Solicitation 26RS0012 is a Small Business set-aside for the California Department of Veterans Affairs to obtain water testing and analysis services for the Veterans Home of California Redding. The contractor must provide all labor, equipment, and materials for the complete water analysis and preventative maintenance of potable drinking water, chilled and hot water systems, and condenser/cooling tower systems. Key responsibilities include quarterly assessments, semi-annual biological drinking water and Legionella control programs, annual cooling tower treatments, and necessary repairs to the Dolphin Transformer Panel, Coil Pipe assembly, and Webmaster One controller. The contractor is responsible for all sampling supplies, including bottles and coolers, and must provide safety data sheets for all chemicals delivered. To be eligible, the contractor must be a DGS-certified Small Business, Micro Business, or Disabled Veteran Business Enterprise and an authorized service provider for Evapco Cooling Towers and the Dolphin Water Treatment system series 3000. Personnel must hold a California Department of Pesticide Regulation Qualified Applicators License in Aquatic and Microbial Pest Control categories, and the contractor must provide at least two factory-trained certified technicians. Insurance requirements include Commercial General Liability of 1 million dollars per occurrence, Professional Liability of 1 million dollars per claim and 3 million dollars aggregate, and mandatory Workers Compensation. The contract will be awarded to the lowest responsive responsible quote, and the state maintains the right to terminate the agreement with thirty days written notice.

California Department of Veterans Affairs

POSTED

DEADLINE

Asbestos Surveying, Air Monitoring, and Laboratory AnalysisThis subcontract agreement establishes a partnership with Home Group to provide specialized asbestos identification and monitoring services across various domestic and commercial housing projects. The scope of work includes conducting management, refurbishment, demolition, and re-inspection surveys to locate asbestos-containing materials, as well as performing air monitoring and laboratory analysis through accredited facilities. All activities must be executed in strict compliance with HSG264 standards to ensure safety and regulatory adherence. The service provider is responsible for delivering comprehensive survey reports, official air monitoring certificates, and detailed laboratory analysis results to the prime contractors.

POSTED

DEADLINE

First Article Testing (FAT) and Quality ComplianceThis subcontract, titled First Article Testing (FAT) and Quality Compliance, involves providing technical testing and reporting services for prime contractors under DLA supply contracts. The scope of work requires the testing of five initial Objective Flip Cover units to ensure full compliance with DLA Master List specifications and source-controlled drawings. These evaluations must be conducted using specialized testing equipment to verify quality and technical standards. The primary deliverable is a formal First Article Test report, which must be generated and submitted within 90 days of the contract award. This project is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located in New Cumberland.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, focuses on First Article Testing and Quality Validation. The selected provider will perform critical quality assurance services for prime contractors on DLA supply contracts, specifically conducting dimensional inspections via CMM metrology and material verification within testing laboratories. Additional responsibilities include the verification of manufacturing process sheets and the provision of quality assurance surveillance for sub-venders. To ensure compliance with aerospace industry requirements, the contractor must adhere to AS9100 or equivalent quality standards. The primary deliverables for this engagement are the First Article Testing Report and a comprehensive Quality Certification package. Performance for this contract is centered at Tinker AFB, and the response deadline for the solicitation is October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test services supports prime contractors under the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The scope of work involves performing First Article Testing to validate initial production units, ensuring they meet strict dimensional requirements of 0.170 thickness, 0.380 height, and 0.435 width. Additionally, the contractor must verify material integrity to ensure no splicing or gluing has occurred, utilizing precision measurement tools and material analysis equipment to confirm compliance. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. The primary deliverables include a comprehensive First Article Test report and a formal certification confirming that all units adhere to the Statement of Work. Interested parties should note the response deadline of October 29, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Quality Inspection and Sampling Services for Critical Aerospace ComponentsThis subcontract for Quality Inspection and Sampling Services for Critical Aerospace Components supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for performing zero-based sampling and quality inspections for prime contractors on aerospace procurements, specifically focusing on turbine engine components. The scope of work includes executing sampling plans according to MIL-STD-1916 or ASQ H1331 to ensure part authenticity and strict compliance with Boeing specifications for critical application items. The service provider will utilize precision measurement tools to verify components and is required to deliver detailed inspection reports and sampling certifications. Performance for this contract takes place in New Cumberland, Pennsylvania. The solicitation was posted on October 18, 2026, with a response deadline of October 26, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

First Article Testing and Validation for Electrical AssembliesThis subcontract involves performing specialized first article testing and validation for electrical assemblies on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work focuses on executing validation tests for NSN 5995-01-676-1147 in accordance with RT001 standards and specific technical data. The selected provider must coordinate closely with Government Quality Assurance Representatives for in-process verification and is required to deliver a formal written First Article Test Report upon completion. To be eligible, contractors must hold JCP certification for handling ITAR and EAR data and maintain certification in either SAE AS9003 or ISO 9001. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties must submit their responses by October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) EvaluationThis subcontract, issued by the Department of Defense via Depot Hill, requires the performance of First Article Testing for a solenoid valve with NSN 4810-01-044-9244. The selected contractor will utilize laboratory equipment to verify the performance and tolerances of the first production unit, ensuring it meets all necessary specifications. This process involves close coordination with the Engineering Support Activity for final approval and culminates in the delivery of a validated sample unit and a comprehensive FAT report. The project is based at Hill AFB and falls under NAICS code 541380. Due to the handling of Controlled Unclassified Information, the contractor must maintain CMMC Level 2 certification. Interested parties must respond by October 29, 2026.

DEPOT HILL

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The County of San Luis Obispo in California is seeking a subcontractor for Environmental Compliance and Certification Services. The primary objective of this contract is to secure third-party testing and certification for GAC batches to ensure full compliance with ANSI/NSF 61 standards, which includes the formal issuance of Certificates of Analysis. The project will be performed in Cayucos, California, under NAICS code 541380. Interested parties must submit their responses by the deadline of September 3, 2026, following the solicitation posting on August 10, 2026.