Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Environmental Compliance & Reporting Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses comprehensive environmental compliance services for federal operations, with a focus on waste tracking, recycling reporting, and maintaining audit-ready documentation to meet regulatory requirements. It requires the contractor to implement systems and procedures that ensure accurate and timely reporting of environmental data, support sustainability initiatives, and facilitate compliance during federal audits. Additionally, the contract mandates adherence toDEI compliance standards under FAR 52.222-90, requiring the contractor to demonstrate equitable hiring practices, workforce diversity, and inclusive employment policies in alignment with federal guidelines. Performance will be governed under the NAICS code 541620, indicating Environmental Consulting Services, and the work is being conducted under a subcontract awarded by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 14, 2026, with no specific place of performance or city-level details provided, suggesting services may be delivered across multiple federal sites or remotely, and all deliverables must be structured to satisfy Defense Logistics Agency’s oversight and reporting protocols.

General Info

Environmental consulting for federal operations, including waste tracking, DEI compliance, and audit-ready reporting under DLA oversight.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541620 - Environmental Consulting Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SP330026P0210.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTAINER RECLAMATION SERVICES, DDWG

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 14

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Support for federal environmental compliance including waste tracking, recycling reporting, and audit-ready documentation, including DEI compliance under FAR 52.222-90.

Similar Contracts

Same NAICS industry code

Medical Device Packaging and Labeling ServicesThis subcontract for Medical Device Packaging and Labeling Services supports prime contractors on DLA Troop Support Medical Supply Chain projects for the Department of Defense. The scope of work involves performing specialized medical-grade packaging and labeling of sterile devices to ensure they are ready for destination delivery. All work must adhere to strict regulatory standards, specifically ASTM D3951 for packaging and MIL-STD-129 and Medical Marking Standard No. 1 for labeling. The service provider will utilize medical-grade sterile pouches and containers designed to maintain sterile barrier integrity for a shelf life of 60 months. Performance of these services will take place in Rochester, and the opportunity is categorized under NAICS code 541620. Interested parties must respond by November 9, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

Cultural Monitoring for 2026-2027 Maintenance, Integrated Vegetation Management (IVM), and Wood Pole Projects (WPP), Western Area Power Administration, Desert Southwest Region, PhoenixThe Western Area Power Administration, under the Department of Energy, is forecasting a contract for cultural monitoring services to support maintenance, Integrated Vegetation Management, and Wood Pole Projects within the Desert Southwest Region of Phoenix. This initiative is scheduled for the 2026-2027 period and falls under NAICS code 541620, focusing on professional environmental consulting services to ensure cultural resource compliance during infrastructure work. The project is currently listed as a forecast with Vernadero Group Inc identified as the incumbent contractor. Coordination for this effort is managed by the Small Business Program Managers within the agency to ensure appropriate oversight and procurement standards are met for the upcoming project cycle.

Western Area Power Administration

POSTED

DEADLINE

CULTURAL RESOUCE SERVICESThe Western Area Power Administration, operating under the Department of Energy, has issued a forecast for Cultural Resource Services. This requirement is categorized under NAICS code 541620 and is currently associated with incumbent contractor Statistical Research Inc. The procurement is scheduled for posting around November 1, 2026. Interested parties may coordinate with the Small Business Program Managers, specifically Tetrault or Teves, for further information regarding this upcoming opportunity.

Western Area Power Administration

POSTED

DEADLINE

Biological Monitoring for 2026-2027 Maintenance and Wood Pole Projects (WPP), Western Area Power Administration, Desert Southwest Region, PhoenixThe Western Area Power Administration, under the Department of Energy, is forecasting a requirement for biological monitoring services to support maintenance and wood pole projects within the Desert Southwest Region of Phoenix. This project, scheduled for the 2026-2027 period, will be performed in Arizona and falls under NAICS code 541620. The opportunity is designated as a small business set-aside, with Vernadero Group Incorporated listed as the incumbent contractor. Interested parties can coordinate with the Small Business Program Managers for further details regarding this upcoming acquisition.

Western Area Power Administration

POSTED

DEADLINE

U.S. DEPARTMENT OF ENERGY/NATIONAL NUCLEAR SECURITY ADMINISTRATION (DOE/NNSA)OFFICE OF COUNTERTERRORISM AND COUNTER-PROLIFERATION (NA-80) TECHNICAL SUPPORT SERVICESThe National Nuclear Security Administration, under the Department of Energy, is forecasting a requirement for technical support services to benefit the Office of Counterterrorism and Counter-proliferation. This procurement is categorized under NAICS code 541620 and is intended as a small business set-aside. The work is expected to be performed in the District of Columbia. Project Enhancement Corporation is listed as the incumbent contractor for these services. Interested parties may coordinate with the Small Business Program Manager, Chelsea Murphy, regarding this upcoming opportunity.

National Nuclear Security Administration

POSTED

DEADLINE

U.S. DEPARTMENT OF ENERGYS (DOE) OFFICE OF THE ASSOCIATE UNDER (AU) SECRETARY FOR ENVIRONMENT, HEALTH AND SAFETY TECHNICAL SUPPORT SERVICES DOE/NNSA TEPS BPA DE-NA0003061 (Mele)The U.S. Department of Energy's Office of the Associate Under Secretary for Environment, Health and Safety is forecasting a requirement for technical support services under BPA DE-NA0003061. This procurement falls under NAICS code 541620 and is designated as a small business set-aside. The work is expected to be performed in the District of Columbia, with Project Enhancement Corporation listed as the incumbent contractor. The forecast was posted on November 1, 2026, and is managed by the Office of Environment, Health, Safety and Security. Interested parties can coordinate with Small Business Program Managers Jessy Abellard or Sara Stoops for further information regarding this opportunity.

Office of Environment, Health, Safety and Security

POSTED

DEADLINE

B23 & B24 Vapor Intrusions Mitigations - Phase 1 GPP FundedThe B23 and B24 Vapor Intrusions Mitigations Phase 1 GPP Funded project is a forecast opportunity issued by the Department of Energy under the Office of Fossil Energy. This effort is categorized under NAICS code 541620 and is designated as a small business set-aside. The work is scheduled to be performed in Oregon, with FED95 LLC listed as the incumbent contractor. The procurement is managed by Small Business Program Manager Brian Halstead. While the solicitation number is not yet available, the forecast was posted on November 1, 2026, indicating the government's intent to seek specialized environmental mitigation services for vapor intrusion at the specified sites.

Office of Fossil Energy

POSTED

DEADLINE

U.S. Department of Energy (DOE) Office of the Associate Under (AU) Secretary for Security Support Services. Contractor to develop and implement safeguards and security programs that provide protectio…The U.S. Department of Energy Office of the Associate Under Secretary for Security Support Services is seeking a contractor to develop and implement comprehensive safeguards and security programs. The primary objective of this effort is to ensure the protection of national security and other vital national assets entrusted to the agency. This requirement is managed by the Office of Environment, Health, Safety and Security and is categorized under NAICS code 541620. This opportunity is currently listed as a forecast with a posted date of November 1, 2026, and is designated as a small business set-aside. The place of performance is located in the District of Columbia. Project Enhancement Corporation is identified as the incumbent contractor for these services. Interested parties may coordinate with Small Business Program Managers Jessy Abellard or Sara Stoops for further information.

Office of Environment, Health, Safety and Security

POSTED

DEADLINE

Individual Consultant to support the development of project proposal for the Gre

Solicitation # UNDP-JOR-00742

The United Nations Development Programme is seeking an individual consultant to support the development of a project proposal for the Green Climate Fund NAP Readiness Program. This consultancy is based in Jordan and is structured as a deliverable-based assignment spanning a total period of three months. Interested candidates must submit their proposals directly through the designated Quantum portal by the specified deadline. All inquiries for clarification should be made in writing via the portal's messaging functionality to ensure a transparent response process. Applicants are advised to use existing profiles or register a new one through the official UNDP procurement resources to complete their submission.

POSTED

DEADLINE

Environmental Review & Wetlands ConsultingThis subcontract opportunity with the City of Camden involves providing specialized environmental review and wetlands consulting services for municipal projects. The selected contractor will be responsible for reviewing remediation plans, Phase I and II Environmental Site Assessments, and wetlands delineations to verify buffer requirements and boundaries for prime contractors. A primary deliverable of the contract is the provision of environmental compliance certifications. To be eligible for this role, the contractor must hold a Licensed Site Remediation Professional certification in the state of New Jersey. Interested parties should note that the response deadline is November 20, 2026, and the work falls under NAICS code 541620.

POSTED

DEADLINE

Environmental Management and Emergency PlanningThis subcontract for Environmental Management and Emergency Planning involves developing environmental safety plans for prime contractors operating on BC Timber Sales forestry projects. The selected provider will be responsible for preparing environmental emergency response plans using the BCTS LPC template, documenting EMS incidents, and performing pre-work site inspections. Key deliverables include completed emergency response plans, detailed incident reports, and comprehensive inspection logs. The project requires a deep understanding of the BC Timber Sales Environmental Management System and adherence to all BC provincial environmental regulations. This opportunity is issued by the Province of British Columbia under the BC Timber Sales Branch, with a response deadline of November 25, 2026. Performance of the contract will take place within Canada.

BC Timber Sales Branch

POSTED

DEADLINE

Water Pollution Control and Washout ServicesThis subcontract for Water Pollution Control and Washout Services supports prime contractors on California Department of Transportation pavement rehabilitation projects located in Imperial. The selected provider is responsible for developing and implementing comprehensive water pollution prevention plans, which include the preparation of the Water Pollution Control Program and the active management of temporary concrete washout facilities. To ensure compliance with state environmental regulations, the contractor must utilize silt fences and washout bins to maintain the site. The primary deliverables for this engagement are an approved Water Pollution Control Program and the successful management of the designated washout site. Interested parties should note that the response deadline for this opportunity is November 16, 2026. The project falls under NAICS code 541620, focusing on environmental consulting and regulatory compliance for infrastructure improvements.

California Department of Transportation

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Primer Coating (NSN 8010016306741)This subcontract involves the procurement and delivery of specialized primer coating, specifically Loctite Corp part number 135286, to support Defense Logistics Agency supply contracts. The contractor is responsible for providing one unit with a minimum shelf life of 24 months, delivered FOB Destination to Fort Leonard Wood, Missouri. Strict adherence to military standards is required, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129, with the application of shelf life marking code 32. Additionally, the contractor must ensure full compliance with HazMat handling regulations and 29 CFR 1910.1200 safety standards.

Paint and Coating Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Critical Application Check Valve (P/N 262T1-4BT-0.5)This subcontract involves the supply of one critical application check valve, part number 262T1-4BT-0.5 and NSN 4820017192817, manufactured by Circor Aerospace, Inc. The procurement is managed through the Defense Logistics Agency under the Department of Defense, with performance taking place in Virginia Beach. The item must be delivered FOB Origin and adhere to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. The contract mandates strict adherence to restricted source requirements and requires compliance with NIST SP 800-171 cybersecurity standards. Interested parties must have responded by the deadline of November 12, 2026, for this requirement categorized under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Refractory Castable Mix SupplierThis subcontract involves the supply of Refractory Castable Mix, identified by NSN 9350015694317, to prime contractors supporting Defense Logistics Agency supply contracts for the USS Ronald Reagan (CVN 76). The supplier is responsible for delivering one unit of the material FOB Destination to FPO 96616, ensuring the product is mercury-free and maintains a minimum extendable shelf life of six months. Strict adherence to federal standards is required, specifically regarding the Buy American Act and military specifications for packaging and marking under MIL-STD-2073-1E and MIL-STD-129. The opportunity is categorized under NAICS code 327999, with a response deadline set for November 12, 2026.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Fabrication of Instruction Data Plates (NSN 9905-00-670-5665)This subcontract involves the fabrication of 17 custom instruction data plates under NSN 9905-00-670-5665 for the Defense Logistics Agency. The contractor is responsible for engraving or printing specific technical data, including dimensions, weight, and National Stock Numbers, according to government drawings, while leaving designated spaces for serial numbers. Execution of this contract requires the use of industrial engraving equipment and valid CJCP certification. The project mandates strict adherence to ITAR/EAR regulations and packaging standards per MIL-STD-2073-1E and MIL-STD-129. All finished plates must be delivered FOB Origin to the Anniston Army Depot. The procurement falls under NAICS code 339999, with a response deadline of November 12, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Lamp Ballasts (NSN 6250-01-347-9549)This subcontract involves the procurement and delivery of 48 lamp ballasts, specifically Magnetek Inc Lighting Products part number 539-TC-P, for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires strict adherence to DLA Packaging Requirements RP001 and the DLA Master List of Technical and Quality Requirements RA001, as well as the application of hazard warning labels in accordance with 29 CFR 1910.1200. Managed under NAICS code 423610 for the Department of Defense, the contract was posted on November 1, 2026, with a response deadline of November 12, 2026. The primary objective is to ensure the delivery of these specific units to meet the technical and safety standards mandated by the agency.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Supplier of Off-White Sealing Compound (NSN 8030-01-450-1952)This subcontract involves the supply of off-white sealing compound, identified by NSN 8030-01-450-1952, for prime contractors supporting Defense Logistics Agency contracts. The required material consists of rolls measuring 1/8 inch thick by 3/4 inch wide and 25 feet long, featuring full-length release paper on a rigid core. The delivery consists of one box containing 28 rolls shipped FOB Origin. The supplier must ensure strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, safety data sheets and labels must comply with 29 CFR 1910.1200 standards. The contract mandates a guaranteed shelf life of 12 months for the provided sealing compound.

Adhesive Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Storage Batteries (NSN 6140-01-250-2113)This subcontract involves the supply of storage batteries, specifically NSN 6140-01-250-2113, to support prime contractors on Defense Logistics Agency Weapons Support Land Supplier Operations projects. The contractor is responsible for sourcing or manufacturing two units for delivery FOB Destination, ensuring that all sample lots contain zero non-conformances. A critical requirement of the agreement is the management of the batteries' shelf life, which is classified as TYPE I (CODE F) and is non-extendable for a period of six months. The project falls under NAICS code 335931 and is managed by the Department of Defense.

Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

Manufacture and Supply of Identification Markers (NSN 7690-01-468-6997)This subcontract involves the manufacture and supply of 18 specialized identification markers under NSN 7690-01-468-6997 for the Defense Logistics Agency in support of the Naval Undersea Warfare Center. The contractor is responsible for fabricating the markers according to Basic Drawing NR 53711 6579815, Revision B, ensuring all items meet a 24-month shelf-life requirement. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards. Performance will take place in Keyport, Washington. Due to the nature of the defense equipment, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on November 1, 2026, with a response deadline of November 12, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

RTV Silicone Adhesive-Sealant SupplierThis subcontract involves the supply of clear, one-part RTV silicone adhesive-sealant, identified by NSN 8040-01-457-0095, for use in adhering and sealing glass windows to doors on commercial clothes dryers. The materials are intended for prime contractors fulfilling Defense Logistics Agency supply contracts and must be delivered as two tubes FOB Destination to Edwards Air Force Base. The supplier must ensure strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Additionally, the contract mandates full compliance with the Buy American Act and hazardous material shipping regulations per IP025. The opportunity is categorized under NAICS code 325520.

Adhesive Manufacturing

POSTED

about 18 hours ago

DEADLINE

Solenoid Valve Supply (NSN 4810-01-066-9450)This subcontract involves the manufacture or procurement of one critical application solenoid valve, identified by NSN 4810-01-066-9450, to support Defense Logistics Agency supply contracts for the USS Ronald Reagan (CVN 76). The valve must be configured for 120 VAC, 60 HZ in accordance with DLA master lists RA001 and RP001. To ensure quality and precision, the provider must utilize calibration systems that meet ANSI/NCSL Z540-1-1994 or ISO 10012-1 standards. The contract requires strict adherence to the Buy American Act, the Berry Amendment, and MIL-STD-2073-1E packaging standards. The final deliverable is one warranted valve. This opportunity is managed under NAICS code 333998 for the Department of Defense, with performance taking place at FPO 96616.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

Manufacturer of Nonmetallic Special Shaped Protective Seals (NSN 9390-01-595-7239)This subcontract involves the manufacture and supply of specialized nonmetallic special shaped protective seals, identified by NSN 9390-01-595-7239, for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment contracts. The selected provider will be responsible for fabricating these protective sheets using precision molding or cutting equipment to ensure exact specifications are met. All deliverables must strictly adhere to MIL-STD-207 and RP001 DLA Packaging Requirements. This opportunity falls under NAICS code 326199 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 12, 2026.

All Other Plastics Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Floor Drain (NSN 4510013773942)This subcontract involves the manufacture or procurement of one specialized floor drain assembly, identified by NSN 4510013773942, to support Defense Logistics Agency supply contracts for the USS George H W Bush CVN 77. The contractor must ensure the assembly meets RA001 technical requirements and adheres to strict mercury restrictions as outlined in NAVSEA 5100-003D. Packaging and marking must be performed in accordance with RP001, MIL-STD-2073-1E, and MIL-STD-129. The final product is to be delivered FOB Origin. This requirement falls under NAICS code 326192 and is managed through the Department of Defense.

Resilient Floor Covering Manufacturing

POSTED

about 18 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS