Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Environmental Compliance and Reporting Support

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract establishes a subcontract to deliver comprehensive technical support for environmental compliance and reporting in alignment with Federal Acquisition Regulation, Defense Federal Acquisition Regulation Supplement, and Department of Defense environmental mandates. This support encompasses the development and maintenance of documentation, secure recordkeeping systems, audit preparedness, and the timely generation of regulatory reports necessary to ensure adherence to federal environmental standards. The scope is focused on enabling the Defense Logistics Agency to meet its obligations under DoD environmental requirements through accurate, defensible, and consistently updated compliance systems. Work under this contract will be performed to support the Department of Defense's overarching compliance objectives, with all activities required to align with NAICS code 541620, which corresponds to environmental consulting services. The contract is positioned as a subcontract under the Defense Logistics Agency and is intended to bolster institutional capacity in environmental governance without specifying a location for performance or a formal point of contact. The posting date indicates the opportunity was released in mid-2026, reflecting a forward-looking procurement timeline aimed at sustaining regulatory readiness across DoD operations.

General Info

Subcontract for environmental compliance support under DoD mandates using NAICS 541620 for Defense Logistics Agency.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide technical support for regulatory compliance, including documentation, recordkeeping, audit readiness, and reporting in alignment with FAR/DFARS and DoD environmental requirements.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance and Documentation

ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & SDS Management

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Handling and Documentation

ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Hazardous and Radioactive Materials Compliance Support

FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Sustainable Products & Environmental Compliance Support

FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance Certification and DocumentationThe contract provides ongoing regulatory compliance support for hazardous materials, ensuring adherence to EPA, DOT, and defense-related regulations. It encompasses critical functions such as conformance certification, management of safety data sheets, and documentation to meet federal requirements for handling and transporting hazardous substances. The work is performed under a subcontract arrangement associated with the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 541620 indicating environmental consulting and related services. The contract is tied to the specific procurement identifier SPE7L325D5006 with delivery order SPE7L326F1726 and is designed to support continuous compliance efforts without a defined end date. Although the place of performance and point of contact details are unspecified, the nature of the work implies nationwide or Department of Defense-wide application, requiring responsive, accurate, and up-to-date regulatory expertise to maintain operational readiness and legal compliance across military and defense supply chains.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance & Documentation (SDS & HWL)The contract requires the preparation, maintenance, and certification of Safety Data Sheets and Hazardous Waste Labeling documentation specifically for battery shipments, in full compliance with Attachment G and Department of Defense regulations. All documentation must be accurately generated and regularly updated to ensure adherence to federal hazardous materials transportation and labeling standards. The work is scoped under NAICS code 541620 and is structured as a subcontract awarded by the Defense Logistics Agency under the Department of Defense, with performance obligations tied to the regulatory framework governing hazardous material handling in military supply chains. The contract is linked to a specific procurement identified by contract number SPE7LX26D0001 and delivery order SPE7L126F060P, though no specific location or point of contact is provided. Timely and precise certification of SDS and HWL documents is critical to avoid regulatory noncompliance and ensure the safe transport of batteries, which are classified as hazardous materials. Failure to meet documentation requirements could result in shipment delays, penalties, or contract termination, making strict adherence to DOD standards and Attachment G a core responsibility of the contractor.

Defense Logistics Agency

POSTED

DEADLINE

Environmental Compliance and PermittingThe contract titled Environmental Compliance and Permitting seeks a subcontractor to manage environmental permitting, develop Spill Prevention, Control, and Countermeasure plans, and coordinate with the Georgia Environmental Protection Division to ensure compliance with regulations for underground storage tanks and fuel systems. The work is focused on regulatory adherence within the City of Rome’s jurisdiction and requires expertise in state-specific environmental requirements, particularly those governed by the Georgia EPD. The scope involves navigating complex permitting processes, preparing documentation for UST systems, and maintaining ongoing communication with state regulators to achieve and sustain compliance. The solicitation was posted on July 17, 2026, with a response deadline of August 20, 2026, and is classified under NAICS code 541620 for environmental consulting services. The contract type is a subcontract, though no set-aside provisions are indicated, and the place of performance is linked to the City of Rome in Georgia. All deliverables must align with state environmental regulations and be submitted in a manner that facilitates approval by the Georgia EPD. The work requires a thorough understanding of federal and state UST regulations, SPCC plan development standards, and the ability to interface effectively with state environmental agencies to resolve compliance issues promptly.

POSTED

DEADLINE

in about 1 month

Environmental Site Assessment and MonitoringThe contract pertains to environmental site assessment and monitoring activities tied to pre-construction phases and ongoing site development, requiring comprehensive surveys to evaluate ecological, geological, and regulatory conditions before any ground-disturbing work begins. It mandates continuous environmental monitoring throughout the development process and the submission of detailed compliance reports to ensure adherence to applicable environmental standards and regulations. The work scope is aligned with NAICS code 541620, indicating it involves environmental consulting services and is structured as a subcontract under the Utah agency. Responses are due by August 5, 2026, with the opportunity posted on July 17, 2026, and all performance activities are expected to occur within Utah, though specific locations are not detailed. There is no set-aside designation specified, and the point of contact information is not provided.

POSTED

DEADLINE

Environmental Compliance and RemediationThe contract titled Environmental Compliance and Remediation is a subcontract under NAICS code 541620, issued by the Health and Human Services Commission in Texas, aimed at assessing, monitoring, and mitigating environmental impacts related to stormwater, wetlands, and hazardous materials. It requires the contractor to deliver comprehensive environmental services ensuring regulatory compliance and long-term environmental protection across project sites within the state. The work involves detailed environmental evaluations, ongoing site monitoring, and implementation of remediation strategies to address contamination and ecological disturbances, with a focus on adhering to state and federal environmental standards. The solicitation was posted on July 17, 2026, with a response deadline of August 7, 2026, at 4:30 PM, leaving potential bidders a limited window to submit proposals. The contract does not specify a set-aside classification or point of contact, and performance location details including city and zip code are not provided, suggesting work may be distributed across multiple sites within Texas. The official portal for the solicitation is accessible via the Texas SmartBuy platform, which serves as the primary avenue for submission and communication. Contractors must demonstrate expertise in environmental remediation, regulatory compliance, and field monitoring to meet the technical and operational demands of this subcontract.

Health and Human Services Commission

POSTED

DEADLINE

CT 12356 - Noise Insulation Program Consulting ServicesThe City and County of San Francisco, through its Airport Commission, has issued a solicitation for Noise Insulation Program Consulting Services under Contract No. 12356, seeking a qualified provider to administer and support the San Francisco International Airport’s Noise Insulation Program (NIP), which encompasses both FAA-funded and Airport-funded initiatives. The scope of work includes identifying eligible residential properties, planning and delivering noise insulation improvements, administering grants, coordinating the design and construction of upgrades, acquiring aviation easements in noise-impacted areas, preparing FAA reimbursement reports, conducting community outreach, maintaining program databases and communications tools, and supporting all phases of project delivery through closeout. The contractor must comply with federal and state noise control regulations, including the Federal Noise Control Act and California Title 21 regulations, as well as local requirements such as the Healthy Airport Ordinance, the Minimum Compensation Ordinance (Article 111 of the San Francisco Labor and Employment Code), and the Labor Peace/Card Check Rule (Rule 12.1, adopted February 7, 2023). Evaluation of proposals is based solely on technical merit, with no consideration of price, and is scored across four weighted factors: Description of Services Work Approach (100 points), Project Team and Qualifications (125 points), Past Projects (40 points), and References (10 points), totaling 275 points, with a minimum qualifications pass/fail gate required for eligibility. Oral interviews are optional and may add up to 212 additional points if conducted. The contract has an initial term of four years with a one-year option for extension, and a not-to-exceed value of $9,500,00.00 for the base term, with potential proportional increases if the extension is exercised. Proposers must submit detailed documentation including SBE participation plans, certifications on tax delinquency and debarment, a Trade Restriction Certification, and mandatory letters of commitment from key personnel dated within five days of the proposal deadline. Small Business Enterprise participation is required at a 5.12% goal, and failure to meet or demonstrate good faith efforts toward this goal renders a proposal non-responsive. Compliance with prompt payment rules mandates subcontractor payments within seven days of the contractor’s receipt of payment from the City, and monthly reports on SBE payments are required throughout the contract term. All proposals must be submitted via the Airport’s e-Procurement portal by August 13, 2026,

Procurement Services

POSTED

DEADLINE

Environmental Compliance and RemediationThe contract titled Environmental Compliance and Remediation seeks a subcontractor to provide environmental site assessments, permitting support, and oversight of remediation activities to ensure adherence to regulatory requirements. The work involves evaluating environmental conditions at affected sites, navigating complex permitting processes, and monitoring remediation efforts to confirm compliance with applicable environmental standards. The scope is focused on supporting the Water System agency in Georgia to manage environmental liabilities and maintain regulatory alignment throughout project lifecycles. Performance of the work is expected to begin following the submission deadline of August 27, 2026, with no specified location for performance beyond the general jurisdiction of Georgia. The contract falls under NAICS code 541620, which classifies environmental consulting services, and is structured as a subcontract, indicating it is part of a broader project managed by another entity. There is no set-aside designation or point of contact provided, and interested parties must access details through the provided online portal to prepare their proposals.

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGEThis contract specifies the procurement of four lead acid, dry charged, rechargeable batteries under NSN 6140-00-889-9777, with a unit price of $4.00 and a total contract value of $16.00. Delivery is required within five days of award, with shipment FOB origin and zero variance allowed in quantity. The batteries must comply with stringent packaging, marking, and shipping standards including MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating a non-extendable Type I shelf life of 60 months. The items must be packaged and palletized according to DLA packaging requirements and all hazardous material shipping protocols as defined by IP025. Mercury or mercury-containing compounds are strictly prohibited except in functional applications such as batteries, fluorescent lamps, and specified instruments, which must be shockproof and include a secondary containment as per NAVSEA guidelines. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and all attributes not explicitly defined are treated as major. Documentation including MSDS/PSDS, MIL-STD-130N labeling, and Federal Standard 313 compliance are mandatory. The end destination is DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey, with freight handled by A.J. Worldwide Services Inc. The contract is issued by the Defense Logistics Agency under solicitation SPE7L7-26-T-4368 with a response deadline of July 30, 2026, and an original required delivery date of July 21, 2026.

Battery Manufacturing

POSTED

about 4 hours ago

DEADLINE

FLOODLIGHT, ELECTRICThe contract specifies the procurement of two electric floodlights with NSN 6220-01-723-0678 and part number 1403522 from J. W. Speaker Corporation, under solicitation SPE8E7-26-T-3364. Delivery is required within ten days of contract award, FOB origin, with no variance in quantity allowed, and inspection and acceptance occur at the destination. The items must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging consistent with ASTM D3951 is acceptable. Packaging units are defined as one unit per pack with a QUP of 001, and palletization must conform to DLA guidelines. The delivery address is W33RBS, Building 1509, Fort Stewart, GA 31314-5185, with shipment mandated to be sent by the fastest traceable means, excluding parcel post. The required delivery date is July 15, 2026, and the contract includes specific government tracking codes, project references, and point of contact information for Kelly Mitchell at the Defense Logistics Agency.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

SENSING ELEMENT, FIRThe contract specifies the procurement of five Sensing Elements, FIR, with NSN 6350375306236 and part number 90100040030-00A, supplied by CONSILIUM MARINE US INC and CONSILIUM MARINE & SAFETY AB. Each unit is priced at $5.00, with a total contract value of $25.00, and delivery is required within 20 days FOB destination, with no variance allowed in quantity. Inspection and acceptance occur at the destination point. Packaging must comply with DLA requirements, specifically RP001, and follow MIL-STD-129 for marking and labeling. If the item is non-hazardous, packaging must meet ASTM D3951 unless superseded by higher-priority DLA Master List Technical and Quality Requirements, which take precedence. Hazardous materials must adhere to TQ requirement IP025. All packaging must conform to specified Unit of Issue and Quantity per Unit Pack standards, and palletization must follow DLA guidelines. Shipments must be sent via the fastest traceable means, not parcel post, to the designated FPO address aboard the USS RICHARD M MCCOOL JR LPD 29, using RDD 777 and referencing the transportation notes C19 and C20. The required delivery date is July 15, 2026, with solicitation issued under SPE8E8-26-T-4753, and the contract is managed by the Defense Logistics Agency under NAICS code 335311.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

LADDER, FIRE, SINGLEThe contract pertains to the procurement of a single fire ladder with NSN 4210-01-127-7836 and part number 775A-14, sourced from DuO-Safety Ladder Corporation in Oshkosh, Wisconsin. One unit is required to be delivered within five days under FOB origin terms, with no variance allowed in quantity and inspection and acceptance occurring at the point of origin. Packaging must comply with MIL-STD-2073-1E, including specified methods for preservation, wrapping, and cushioning, and marking must adhere to MIL-STD-129 without special codes. The item is subject to DLA’s packaging and quality requirements referenced in the DLA Master List, and Covered Defense Information protocols apply. Delivery is directed to a Canadian military facility in Montreal, with both parcel post and freight shipping addresses provided. The contract is issued under solicitation SPE8E6-26-T-3751, with a required delivery date of July 23, 2026, and the supplier must meet all federal acquisition standards, including unit of issue alignment and hazardous materials handling where applicable.

POSTED

about 4 hours ago

DEADLINE

GAGE FEMALE TYPE NThe contract pertains to the procurement of a GAGE FEMALE TYPE N with NSN 5220-01-397-2521 and part number 85054-60050 from Keysight Technologies Inc, requiring one unit to be delivered within 20 days from the order date under FOB origin terms with no variance permitted in quantity. All packaging must comply strictly with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement, with DLA Master List of Technical and Quality Requirements taking precedence over any general standards. Inspection and acceptance occur at the destination, and the item is designated as a critical application item with potential exposure to covered defense information. Shipping must be conducted via the fastest traceable means, explicitly prohibiting parcel post, with delivery directed to Det ELMACO, 4th Maint Bn, 4th CRR at Fort Benjamin Harrison in Indianapolis, IN. The contract references specific DLA procurement controls, including the DLA Master List revision effective on the solicitation issue date, and mandates compliance with all applicable technical and quality requirements identified by R or I numbers. The required delivery date is March 25, 2026, with the solicitation issued under SPE8E5-26-T-3631 and a response deadline of July 30, 2026, managed by the Defense Logistics Agency under NAICS code 334516, with Khue Nguyen as the primary point of contact.

Analytical Laboratory Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

FILTER, AIR DUCTThe contract is for the procurement of two air duct filters with NSN 4460016180197 and part number RITTAL 0102-.700, issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-4754. The items must be delivered within 20 days to the USS Dwight D Eisenhower CVN 69 at FPO AE 09532, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence. Palletization must adhere to DLA packaging requirements, and shipments must be sent via traceable means—parcel post is prohibited. The unit of issue is each, priced at $2.00 per unit for a total of $4.00. The Required Delivery Date is July 15, 2026, and the contract references applicable technical and quality standards via R and I numbers from the DLA Master List. All government-specific labeling, documentation, and shipping instructions including VSM for vendors, TCN V033696187CJ24, and DLAD Proc Notes C19 and C20 must be strictly followed.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

ADHESIVEThis contract pertains to the procurement of an adhesive product identified by NSN 8040-01-685-5306, with part number RTV157, supplied in 2.8-ounce tubes as a solid paste in gray/grey color. The item is classified as a Type I (Code H) with a non-extendable shelf life of 12 months, requiring storage between 60 and 80 degrees Fahrenheit. The supplier must comply with all DLA packaging standards under MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for Type I shelf-life items, and palletization per DLA requirements. Hazardous material regulations under OSHA’s revised Hazard Communication Standard are strictly enforced, mandating submission of Safety Data Sheets and compliant labeling per 29 C.F.R. 1910.1200 prior to award, along with employee training on these updated requirements. The product must be delivered FOB destination within five days of notification, with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. The shipment is destined for a U.S. NATO facility in Romania through vessel transport, with specific customs clearance instructions and transportation protocols governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE8ES-26-T-2386 for a total of twenty tactical units, with a required delivery date of July 21, 2026, and is subject to federal procurement regulations including the removal of government identification from non-accepted supplies and the incorporation of DLA’s master list of technical and quality requirements referenced by R and I numbers.

Adhesive Manufacturing

POSTED

about 4 hours ago

DEADLINE

VALVE, CHECKA check valve with a 1/4 inch male brass connection and a nominal opening pressure of 1/3 PSI is being procured under solicitation SPE7MC-26-T-140R, with a single unit quantity requiring delivery within 20 days FOB origin. The item is designated as a critical application and must conform to DLA packaging requirements and technical specifications referenced in the DLA Master List of Technical and Quality Requirements. The valve must be manufactured to the specified part number B-4C4-1/3 by Swagelok and is identified by NSN 4820011801756. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional exceptions like batteries, fluorescent lamps, sensors, or reagents as defined by NAVSEA; any such exceptions must include a secondary containment barrier and be shockproof per NAVSEA 5100-003D. Preservation and packaging must comply with MIL-V-3 and MIL-STD-2073-1E, using Level A preservation when ZZ is the specified method, and all marking must follow MIL-STD-129 with no special marking codes applied. The item must be shipped via traceable freight to Dyess Air Force Base, TX, and parcel post is strictly forbidden. Inspection and acceptance occur at the destination, with zero variance permitted in quantity, and the original required delivery date is July 15, 2026.

Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

FILTER, GASThe contract is for the procurement of 200 units of GAS FILTER, identified by NSN 4240013927048 and part number 020X from SUBMERSIBLE SYSTEMS, INC., under solicitation SPE8E6-26-T-3743. Delivery is required within five days of award, FOB origin, with no variance allowed in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, unit containers, and packing levels, with marking in accordance with MIL-STD-129 and palletization per DLA packaging requirements. The contract prohibits intentional addition of mercury or mercury-containing compounds to the supplies, except for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. Packaging and shipping of hazardous materials must meet IP025 standards. The freight forwarder is A.J. Worldwide Services Inc. in Secaucus, NJ, with delivery destined to DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey. The contract is a total small business set-aside under NAICS code 315990, with a response deadline of July 30, 2026, and an original required delivery date of July 21, 2026. Government-specific codes and identifiers are provided for logistics and tracking, including DIC A01, DIST F9B, and ADV 2L. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the procurement size.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 4 hours ago

DEADLINE

COATING COMPOUND, NOThe contract specifies the procurement of a non-slip coating compound identified by NSN 8010015506036, supplied in kits comprising components A and B totaling 18.9 liters (5 gallons), with a gray color matching Fed-Std-595, Color Number 36076. The item is classified as a Type II (Code 4) shelf-life item with a 12-month extendable shelf life, and packaging must strictly adhere to MIL-STD-2073-1E, Level B, using preservation method HM (humidity control) and dry storage conditions. All kits must be packed in a single box unless multiple boxes are necessary, in which case each must be marked with its sequence (e.g., 1 of 2) and include a complete contents list, with cushioning sufficient to prevent movement or damage during transit. Packaging and marking must comply with MIL-STD-129, including the use of Data Matrix barcodes for NSN, contract number, and other required data elements, along with special marking code 33 to indicate shelf-life status. The coating compound is subject to the revised OSHA Hazard Communication Standard (29 C.F.R. 1910.1200) and Global Harmonized System (GHS) requirements, mandating the submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) prior to award, as well as GHS-compliant hazard labels. Suppliers must ensure their employees are trained on these requirements. Delivery is FOB destination to Yokohama, Japan, with a 20-day delivery window from award date and a required delivery date of July 15, 2026. The Government retains inspection and acceptance authority at the destination point. The contract follows simplified acquisition procedures and incorporates DLA’s master list of technical and quality requirements referenced by R or I numbers. The contract type is not explicitly stated but is likely firm-fixed-price based on standard practice for such procurements. The purchase quantity is 4 kits, and invoicing must be submitted via Wide Area WorkFlow (WAWF). The contractor must comply with all applicable clauses including those related to employment eligibility, combating human trafficking, sustainable products, safeguarding covered defense information, and the prohibition of covered telecommunications equipment from restricted foreign entities. Additionally, the offeror must register in SAM, validate size status and socioeconomic certifications, and provide UEI and C

Paint and Coating Manufacturing

POSTED

about 4 hours ago

DEADLINE

CONNECTORThe contract pertains to the procurement of a connector with NSN 5935-LN-003-5697 and part number 8011-00002, for a quantity of ten units, to be delivered within five days of award. The delivery is FOB destination, with inspection and acceptance occurring at the destination location, and no variance in quantity is permitted. Packaging must comply with ASTM D3951 and mandatory DLA packaging standards, including MIL-STD-129 for marking and labeling, with palletization adhering to RP001 requirements. Item Unique Identification is not required per the Service customer’s direction, and the item has no shelf life. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified in the contract. Critical, major, and minor attributes must be verified at Level VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0. All technical and quality requirements referenced by R or I numbers take precedence and are sourced from the DLA Master List. The item must be shipped by the fastest traceable means, not parcel post, to the specified government facility in Jacksonville, Florida. The required delivery date is July 21, 2026, with a solicitation issued under SPEFA3-26-T-0321 and response deadline July 27, 2026. Unit of issue is each, price is $10.00 per unit for a total of $100.00.

Other Support Activities for Air Transportation

POSTED

about 4 hours ago

DEADLINE

SHEET, NONMETALLIC, PROTThe contract pertains to the procurement of a nonmetallic protective sheet and related special-shaped sections, identified by NSN 9390015957239 and part number 6440389-01M1, with a shelf life of 18 months classified as Type I, non-extendable. Deliveries are to be made FOB origin within five days of contract award, with no quantity variance allowed, and inspection and acceptance occur at the destination point. Packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking compliance to MIL-STD-129 and a mandated 10x10 inch MRAP sticker in fluorescent yellow with bold black lettering, placed visibly on palletized shipments destined for DDC depots or CCPs, though OEM-specific colors are authorized for designated contractors under Lean Six Sigma guidelines. Deviations in sticker dimensions are permitted if space constraints prevent full compliance, and no quality notifications are required if stickers are missing or OEMs run out of yellow stock. Hazardous material shipping rules and traceable freight methods are enforced, with no parcel post allowed, and shipments must be delivered to specified military installation addresses in Indiana and Washington state under unique identifiers and project codes. The contract is issued under solicitation SPE8E5-26-T-3624, administered by the Defense Logistics Agency, and is subject to overarching technical and quality requirements referenced from the DLA Master List, with all terms governed by the version in effect at the solicitation or award date.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 4 hours ago

DEADLINE