Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Environmental Compliance & Testing Services

Active

State & Local

Response Deadline08/15/2026, 12:00:22 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive environmental testing and compliance services focused on arsenic removal systems, involving pre- and post-installation water quality analysis to establish baseline conditions and verify treatment effectiveness. The scope includes regulatory reporting to ensure adherence to state and federal standards, as well as performance validation to quantify the efficiency of arsenic removal technologies under actual operating conditions. All activities must be conducted in accordance with applicable environmental regulations and documented to support compliance audits. This subcontract, under NAICS code 541620 for environmental consulting services, is solicited by the Arizona utilities agency with a response deadline of August 15, 2026. Performance is expected to occur within Arizona’s service jurisdiction, though exact locations are not specified. The work demands technical expertise in water quality analysis, regulatory frameworks, and data reporting, with results directly impacting system certification and ongoing operational compliance. Contractors must be prepared to deliver precise, defensible data and maintain strict adherence to timelines and regulatory requirements throughout the project lifecycle.

General Info

Environmental testing for arsenic removal systems with regulatory reporting and performance validation in Arizona.

Agency

Arizona → UtilitiesView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

AZ, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 14

subcontract

Response DeadlineAug 15

Submission deadline

Response Deadline

08/15/2026, 12:00:22 AM UTCin 25 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyArizona → Utilities

ContactsNo contacts available

OfficeN/A

Organization / Agency

Arizona → Utilities

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Pre- and post-installation water testing, regulatory reporting, and performance validation of arsenic removal efficiency.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance & Labeling ServicesThe contract requires comprehensive regulatory compliance services for hazardous materials, focusing on accurate hazard labeling, preparation and maintenance of Safety Data Sheets (SDS), and OSHA-compliant safety reporting to ensure adherence to federal workplace safety standards. The scope centers on supporting safe handling, storage, and transportation of hazardous substances across defense operations, with all documentation and labeling required to meet current regulatory frameworks. This subcontract, issued under NAICS code 541620 for environmental consulting services, is managed by the Defense Logistics Agency under the Department of Defense. It is designated for performance in support of federal defense infrastructure, with no specific geographic location specified for the place of performance. The contract was posted on July 20, 2026, and is tracked under the DIBBS system with the contract identification SPE7L426D61CZ and delivery order SPE7L026F5662.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive identification, classification, and documentation of hazardous materials to ensure full compliance with OSHA and DFARS regulations. This includes the accurate authoring and timely submission of Safety Data Sheets (SDS) for all identified substances, with strict adherence to federal safety and reporting standards. The work must support the Department of Defense’s supply chain operations by maintaining rigorous hazardous materials management protocols, ensuring that all documentation meets the legal and operational requirements for handling, storage, and transportation of dangerous goods. Performance of this subcontract is designated for Pineville, Louisiana, under the NAICS code 541620, which pertains to environmental consulting services. Responses are due by July 31, 2026, following a posting date of July 20, 2026. The contract falls under the scope of the Land Supply Chain organization within the Department of Defense, emphasizing its critical role in military logistics and safety compliance. All activities must align with federal defense acquisition regulations, and failure to meet SDS submission deadlines or classification standards may result in non-compliance penalties or contract termination.

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the identification, labeling, and submission of Safety Data Sheets for hazardous materials contained in supplied kits, ensuring full compliance with Occupational Safety and Health Administration and Department of Defense regulations. All SDS documentation must be accurately processed and delivered according to established federal standards, with strict attention to detail to maintain regulatory adherence and operational safety. The work is governed under NAICS code 541620 and is structured as a subcontract under the Land Supply Chain division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and performance is expected to align with DoD supply chain requirements, though specific performance locations are not detailed. While no set-aside preferences are indicated, the contract mandates precise documentation practices for hazardous material handling and reporting, underscoring the critical nature of safety and regulatory compliance in the delivery of kit components. All submissions must be made through the designated DIBBS platform using the provided solicitation number.

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Material Safety Data Sheet (MSDS) Management and DocumentationThe contract requires the preparation, updating, management, and submission of Material Safety Data Sheets for hazardous materials, ensuring strict adherence to OSHA, GHS, and DLA regulatory standards. All documentation must be maintained with a minimum three-year retention period to support compliance and audit readiness. The work is to be performed for the Department of Defense’s Medical Supply Chain Pharm FSA, with the place of performance located in Groton, Connecticut, at the zip code 06340-4905. This subcontract falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to health and safety compliance. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and additional information can be accessed through the DIBBS platform.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 10 hours ago

DEADLINE

Hazardous Material Compliance and Safety Data SubmissionThe contract requires identification of hazardous materials used in packaging processes and the preparation of Safety Data Sheets and hazard labels that comply with federal and Defense Department regulations. The work is focused on ensuring all hazardous substances are properly documented and labeled according to established safety standards, with an emphasis on alignment with defense-specific requirements. This includes thorough evaluation of materials throughout the packaging workflow to determine potential risks and to generate accurate, regulatory-compliant documentation. The subcontract falls under NAICS code 541620, indicating it involves scientific and technical consulting services, and is managed by the Defense Logistics Agency under the Department of Defense. The contract is posted for potential bidders as of July 20, 2026, with performance expected to support defense supply chain operations. Although location details are unspecified, the obligations are tied to federal and military compliance frameworks, necessitating familiarity with OSHA, DOT, and other relevant hazardous materials handling regulations. Success in this effort requires expertise in hazardous material classification, SDS authoring, and labeling protocols aligned with defense procurement standards.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance & SDS PreparationThe contract requires the preparation and submission of Safety Data Sheets and hazard labels for the TCOM-200-PUR-DB cable to ensure compliance with OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement requirements. This work is critical to meeting federal safety and regulatory standards for hazardous materials handling, labeling, and documentation within the Department of Defense supply chain. The deliverables must accurately reflect the chemical composition, physical and health hazards, and proper handling procedures for the cable to support safe usage and transport across military and contractor environments. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, and is classified as a subcontract under NAICS code 541620 for scientific and technical consulting services. Performance location is designated as Tobyhanna, Pennsylvania, with a zip code of 18466-5050, indicating the work is tied to Defense Logistics Agency operations at this site. The contract falls under the Land Supply Chain organization within the Department of Defense, and bidders must ensure their submissions align with all applicable federal regulations governing hazardous materials documentation and labeling for defense-related products.

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 regulations. This subcontract is focused on ensuring accurate, up-to-date, and legally compliant documentation for hazardous materials used or handled by the Department of Defense. All deliverables must align with federal safety standards to support proper hazard communication, worker protection, and supply chain accountability within defense operations. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under the NAICS code 541620, which corresponds to scientific and technical consulting services. The contracting activity is under the Active Devices Division of the Department of Defense, indicating this effort supports specialized defense systems requiring strict adherence to hazardous materials management protocols. Subcontractors must be prepared to meet detailed regulatory requirements without deviation and ensure their documentation is traceable, standardized, and immediately accessible for audit or inspection purposes.

ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and material safety data sheets for electronic components that contain hazardous substances, ensuring full compliance with both DFARS and OSHA standards. This work is critical for maintaining regulatory adherence across the Department of Defense supply chain, particularly for components procured under Defense Logistics Agency oversight. The services must accurately identify, document, and communicate risks associated with hazardous materials within electronic systems, supporting safe handling, storage, and disposal procedures throughout military operations. The contract is classified as a subcontract under NAICS code 541620, indicating it involves scientific and technical consulting services, specifically tailored to regulatory compliance in hazardous materials management. It was posted on July 20, 2026, and is linked to the award identification SPE7M526V6191, with performance occurring within the broader scope of Department of Defense operations. Although specific geographic details or point of contact information are not provided, the requirement is centralized under the Defense Logistics Agency, which manages the logistics and compliance infrastructure for defense contractors nationwide.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance and HandlingThe contract titled Hazardous Materials Compliance and Handling is a subcontract issued by the Department of Defense through its Nuclear Reactor Program, aimed at securing consulting and compliance services related to the proper handling, labeling, and disposal of hazardous materials in alignment with Department of Defense regulations. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, ensuring eligibility and preference for small businesses as defined by the Farm Bill and FAR 19.5. The NAICS code 541620 identifies the scope of work within environmental consulting services, requiring specialized expertise in regulatory adherence, safety protocols, and documentation for hazardous waste management. Performance of the contract is specifically required at Tracy, California, with a zip code of 95304-5000, indicating the physical location where these services must be rendered. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, allowing potential offerors a window of eleven days to prepare and submit proposals. The contract opportunity is accessible via the DIBBS platform, and all interested small businesses must ensure full compliance with DoD standards and timely submission to be considered.

NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Handling and Labeling

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract titled Hazardous Materials Handling and Labeling requires the application of OSHA-compliant hazard warning labels and the preparation of Safety Data Sheets for any insulation blanket or packaging that contains hazardous materials. This subcontract, issued under NAICS code 541620 by the ASC COMMODITIES DIVISION within the Department of Defense, is focused on ensuring regulatory compliance for material safety documentation and labeling procedures. The work must be performed at the designated place of performance in Cherry Point, North Carolina, with a zip code of 28533-5040. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with all deliverables needing to meet federal occupational safety standards. Any subcontractor engaging with this contract must be prepared to identify, classify, and document hazardous substances in accordance with OSHA regulations, ensuring proper communication of risks through standardized labeling and accessible Safety Data Sheets.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Handling and DocumentationThe contract requires strict adherence to OSHA’s Hazard Communication Standard for all hazardous materials involved in cabinet production or preservation processes, ensuring proper labeling, safety data sheets, and employee training are maintained throughout operations. The work is classified as a subcontract under NAICS code 541620 and is managed by the Department of Defense through its Medical Supply Chain FSH entity, with the place of performance located at APO 09227-0000. All activities must comply with federal safety regulations concerning the identification, handling, and documentation of hazardous substances to protect worker health and ensure regulatory compliance. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, indicating a tight turnaround for submissions. There is no set-aside designation specified, and the contract does not include a point of contact, suggesting potential reliance on the DIBBS portal for correspondence. Contractors are expected to demonstrate robust systems for managing hazardous material documentation and safety protocols as part of their proposal, with full compliance mandatory for contract execution. The work is tied to military medical supply logistics, implying that any noncompliance could impact broader defense operations.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 10 hours ago

DEADLINE

More opportunities from Arizona → Utilities

Same awarding agency

Construction Management & Site OversightThe contract encompasses comprehensive on-site supervision, scheduling, safety compliance, and coordination of multiple trades during the installation of utility systems. The scope requires active management of daily field operations to ensure timely progress, adherence to safety protocols, and seamless collaboration among contractors and subcontractors. All activities must be conducted in alignment with industry best practices and regulatory standards to maintain project integrity and worker safety. This subcontract is tied to a utility project in Arizona, with a posted date of July 14, 2026, and a response deadline of August 15, 2026. The North American Industry Classification System code 238990 indicates it falls under other specialty trade contractors, suggesting specialized installation services are central to the work. While no specific location details are provided within the contract data, performance is expected to occur at a site within Arizona under the oversight of the Arizona Utilities agency. Bidders must be prepared to deliver robust site management capabilities, with an emphasis on coordination, compliance, and operational efficiency throughout the installation phase.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Mechanical Piping & System IntegrationThe contract titled Mechanical Piping & System Integration involves the installation of piping, valves, pumps, and the integration of water treatment units into the existing municipal water infrastructure in Arizona. This subcontract is classified under NAICS code 238220, which pertains to plumbing, heating, and air-conditioning contractors, indicating the scope requires specialized mechanical and civil infrastructure expertise. The work demands precise coordination with current systems to ensure seamless functionality and regulatory compliance without disrupting ongoing municipal water services. The posting date is July 14, 2026, with a response deadline of August 15, 2026, allowing interested parties approximately one month to prepare and submit proposals. Performance of the work is localized within Arizona, though specific city or zip details are not provided, and the contracting entity is identified as Utilities, suggesting involvement with a local water or public utilities authority. The opportunity is open for bidding via an online procurement portal, and while there is no set-aside designation, interested contractors must be prepared to meet technical and operational requirements tied to municipal water system upgrades.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical & Instrumentation InstallationThe contract involves the installation of control panels, SCADA systems, sensors, and associated electrical components to automate water treatment operations, focusing on enhancing operational efficiency and reliability through advanced instrumentation and control technologies. Work will be performed under a subcontract under NAICS code 238210, which classifies electrical contracting services, and is issued by the Arizona Utilities agency with a response deadline of August 15, 2026. The scope requires technical expertise in integrating automated systems into water treatment infrastructure, ensuring compliance with industry standards for safety, performance, and durability. Although specific performance locations and contact details are not provided, the project is part of a broader initiative to modernize utilities infrastructure in Arizona.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Water Treatment Equipment SupplyThe contract seeks the supply of specialized water treatment equipment designed for the removal of arsenic, including adsorption media, filters, pressure vessels, and reverse osmosis membranes. This subcontract is issued under the NAICS code 333318 for other commercial and service machinery manufacturing and is targeted toward vendors capable of delivering high-performance, reliable components for municipal or utility-grade water purification systems. The equipment must meet rigorous technical standards to ensure effective arsenic reduction in compliance with public health and environmental regulations. The solicitation was posted on July 14, 2026, with a firm response deadline of August 15, 2026, indicating a four-week window for submissions. The contracting entity is the Utilities organization in Arizona, though specific city or office details are not provided. The place of performance and point of contact information are also unspecified, suggesting the scope may serve broader regional water systems rather than a single fixed location. Interested parties should review the procurement portal linked in the notice to access full technical specifications and submission requirements.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Arsenic Treatment System Design & EngineeringThe contract involves engineering design, process modeling, and permitting support for the development of a municipal system to remove arsenic from drinking water, ensuring full compliance with EPA and state regulatory standards. The work requires technical expertise in water treatment technologies, modeling of treatment processes under varying conditions, and coordination with regulatory agencies to secure necessary permits, all aimed at delivering a safe and compliant public water infrastructure solution. The project is classified under NAICS code 541330, indicating it is a subcontract for engineering services, and is being managed by the Utilities agency in Arizona with a response deadline of August 15, 2026. The place of performance and specific location details are not provided, but the system is intended for municipal use within Arizona’s jurisdiction.

Engineering Services

POSTED

DEADLINE

Arsenic Treatment SystemThe City of Cottonwood, Arizona, has issued a solicitation titled Arsenic Treatment System with identification number FY27-UT-01, targeting a contractor to deliver services related to the treatment of arsenic in the city’s water supply. The solicitation, posted on July 14, 2026, with a response deadline of August 15, 2026, is administered by the Utilities department and is intended for performance within the city’s corporate boundaries in Yavapai County. The contract is structured as a service agreement rather than a standard federal procurement, with no applicable Federal Acquisition Regulation clauses, meaning all terms are locally drafted and customized to municipal requirements. While the full scope of work is detailed in Exhibit A, which is incorporated by reference, the agreement specifies that the contractor must comply with all applicable federal, state, and local laws, including OSHA standards, Arizona Revised Statutes relating to workplace safety and public records, and city ordinances. Insurance requirements mandate commercial general liability, automobile liability, workers’ compensation, and professional liability coverage, though exact monetary thresholds are not disclosed. Payment is contingent upon the submission of itemized invoices to the City and is subject to fiscal year budget approvals that extend only through June 30, with performance beyond that date requiring additional Council authorization. The agreement includes comprehensive provisions for indemnification, termination under various conditions including convenience, cause, conflict of interest, and grace periods for work stoppage or gratuities, as well as mandatory certifications regarding compliance with federal immigration laws and prohibitions against participation in the Israel boycott and the use of forced labor involving ethnic Uyghurs, the latter requiring notification within five business days if noncompliance is discovered and potential termination if unresolved within 180 days. Although the contracting office is located at 821 N Main Street, Cottonwood, AZ 86326, and the primary point of contact is the Accounting Manager Jeff Cook, no Contracting Officer, Contracting Officer’s Representative, or Procuring Contracting Officer is formally designated, and no specific invoice processing address or electronic invoicing system is identified. The contract does not specify a start or end date, performance timeline, FOB terms, packaging standards, or technical specifications beyond legal compliance, and no evaluation criteria, weights, or selection methodology are outlined, indicating that it is a finalized agreement rather than a competitive solicitation with structured scoring. Pricing is left in placeholder form with references to a maximum contract value to be determined, and no

POSTED

DEADLINE