Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Environmental Control Air Valve Assembly Supplier

Active

Federal

Response Deadline10/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of 17 Environmental Control Air Valve Assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing part number 1604107-1, ensuring it meets all critical application standards. Strict adherence to federal and industry regulations is required, including Buy American certification and DFARS compliance. All units must be marked according to MIL-STD-129 and packaged in accordance with ASTM D3951 and RP001 standards. The solicitation was posted on October 21, 2026, with a response deadline of October 27, 2026.

General Info

Supply 17 Environmental Control Air Valve Assemblies for DoD meeting federal and industry standards.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332911 - Industrial Valve Manufacturing

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-Q-0073.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE ASSEMBLY, ENVIRON

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineOct 27

Submission deadline

Response Deadline

10/27/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies Environmental Control Air Valve Assemblies for prime contractors on DLA Weapons Support Fluid Handling Division projects. Manufactures or sources part number 1604107-1 (NSN 1660-00-445-7492) meeting critical application standards. Performs packaging per ASTM D3951 and RP001, and marking per MIL-STD-129. Requires Buy American certification and DFARS compliance. Delivers 17 completed and packaged valve assemblies.

Similar Contracts

Same NAICS industry code

Liquid Oxygen (LOX) Tube Assembly FabricationThis subcontract involves the fabrication of a single Liquid Oxygen (LOX) Tube Assembly, part number 1660-00-868-6582, for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work includes the cutting, bending, and assembly of tubing specifically designed for cryogenic fluid systems, utilizing precision welding and joining techniques. The contractor must utilize precision tube bending equipment and Measurement and Test Equipment in accordance with RT001. Compliance with CMMC Level 2 and MIL-STD-1916 standards is mandatory. This requirement is issued by the Department of Defense under NAICS code 332911, with a response deadline of October 27, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

VALVE, SOLENOID

Solicitation # SPE7M2-27-T-0297

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7MC-27-T-0918

Solicitation SPE7MC-27-T-0918 is a request for quotations from the Defense Logistics Agency for the procurement of one check valve, identified as a critical application commercial item with NSN 4820017196114. The requirement specifies part numbers 123A-8 from Admiral Valve LLC or 416.123A-8-PL4356 from W. & O. Supply, Inc. The original required delivery date is May 12, 2026, with a delivery timeframe of 20 days after order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically for the Assault Craft Unit One in San Diego, California. The contract mandates strict adherence to quality and technical standards, including ISO 9001:2015 and the DLA Master List of Technical and Quality Requirements. Packaging and marking must comply with RP001, MIL-STD-129, and MIL-STD-2073-1E. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals. Administratively, the procurement is not a small business set-aside and falls under NAICS code 332911. Key regulatory clauses include the Buy American and Balance of Payments Program, safeguarding of covered defense information, and electronic invoicing via the Wide Area WorkFlow system. All quotes must be submitted through the DLA Internet Bid Board System.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE4A5-27-T-1015

Solicitation SPE4A5-27-T-1015 is a fixed-price request from the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of 18 ball valve assemblies, specifically identified as vent valves with NSN 4820001722322 and Honeywell International Inc. part number 311564-5. This is designated as a critical application item and is classified as a commercial item. The required delivery date is April 2, 2028, with a need ship date of April 6, 2027, and delivery is set for FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements, including specific provisions for source approval requests, covered defense information, and measuring and test equipment. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow RP001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding domestic sourcing, cybersecurity, and equal opportunity.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-27-Q-0032

Solicitation SPE7MC-27-Q-0032 is a Firm Fixed Price request from the Defense Logistics Agency for the procurement of three safety relief valves, identified by NSN 4820-01-525-3868. The items are associated with Dante Valve Company part numbers BAMHH03MMM and D4000FF ASSY BAMHH03MMM. Manufacturing may require specific casting, forging, and special tooling, for which the government may not provide the necessary equipment. Delivery is required within 107 days after the order is placed, with the final destination being the USS George H W Bush CVN 77. The contract mandates strict adherence to environmental and quality standards, including a prohibition on the intentional use of mercury and Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Inspection and acceptance will occur at the destination. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-27-T-0920

Solicitation SPE7MC-27-T-0920 is a fixed-price procurement issued by the Defense Logistics Agency for one safety relief valve, identified by NSN 4820-01-696-3647. The requirement is designated as a total small business set-aside under NAICS code 332911. Delivery is required within 20 days after receipt of the order, with shipping destinations including Electric Boat Corporation in Connecticut and NAVSEALOGGEN in Pennsylvania. Inspection and acceptance will occur at the destination. The contract imposes strict technical and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls for technical data. Packaging must adhere to ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Contractors must utilize the Wide Area WorkFlow system for invoicing and are subject to the Buy American Act and Berry Amendment domestic sourcing restrictions. Primary administration is handled by Paula Mcclary.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7MC-27-T-0911

Solicitation SPE7MC-27-T-0911 is a request for quotations issued by the Defense Logistics Agency for the procurement of one ball valve, identified as a critical application item with NSN 4820011238812 and Milwaukee Valve Company part number V-8501-700-200. The required delivery date is August 21, 2026, with a delivery timeline of 20 days after award. Inspection and acceptance will occur at the destination, specifically for shipment to the USS Higgins DDG 76. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies that Class I ozone depleting chemicals and mercury compounds are prohibited. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include electronic invoicing through the Wide Area Workflow system and compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001. This is not a small business set-aside, and the applicable NAICS code is 332911.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7MC-27-Q-0014

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7MC-27-T-0916

Solicitation SPE7MC-27-T-0916 is a fixed-price requirement issued by DLA Distribution San Joaquin for the procurement of four ball valves, identified by NSN 4820010760519. This is a restricted source item requiring engineering source approval by the government design control activity. The contract specifies a delivery timeline of 154 days after order, with a need ship date of April 6, 2027, and an original required delivery date of October 1, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the origin. The procurement includes stringent technical and quality requirements, including a prohibition on Class I ozone-depleting chemicals and strict limitations on the use of mercury in accordance with NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and RP001, with specific IP042 oxygen clean packaging and marking requirements. This includes a mandatory O2 cleaning certificate label on the innermost barrier bag and Special Clean O2-N markings on the MIL-STD-129 labels. Administrative requirements include registration in the System for Award Management and the use of the Wide Area Workflow for invoicing. The solicitation is not a small business set-aside and falls under NAICS code 332911. Key regulatory clauses are incorporated, including the Buy American and Balance of Payments Program, basic safeguarding of covered contractor information systems, and DFARS requirements for safeguarding covered defense information and cyber incident reporting.

DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7MC-27-T-0901

This fixed-price solicitation from the Defense Logistics Agency is for the procurement of one cartridge-type check valve with a 15.0 PSI opening, identified by NSN 4820013652845. The item is intended for delivery to the USS Ronald Reagan CVN 76, with a required delivery window of 20 days after award and an original required delivery date of October 22, 2026. The procurement is not a small business set-aside and falls under NAICS code 332911. Technical compliance requires the manufacturer to maintain a quality inspection system meeting SAE AS9003 or ISO 9001 standards, with technical inspection required at the manufacturing facility. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract prohibits the intentional addition of mercury and restricts the use of additive manufacturing without prior approval. Key regulatory requirements include compliance with the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

ACTUATOR, ELECTRO-ME

Solicitation # SPE7MC-27-T-0900

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7MC-27-T-0904

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services supports prime contractors delivering for the DLA Weapons Support Fluid Handling Division. The scope of work involves providing specialized military-grade packaging and traceable shipping, ensuring all items are packaged according to ASTM D3951, marked per MIL-STD-129, and palletized following RP001 standards. The contractor is required to use MIL-SPEC materials and equipment to prepare shipments for final delivery to the National Guard Aviation Support Facility in Williamstown, West Virginia. The opportunity is categorized under NAICS code 488410 and is managed by the Department of Defense. Interested parties should note the response deadline of October 29, 2026.

Motor Vehicle Towing

POSTED

about 19 hours ago

DEADLINE

Manufacturer/Supplier of SAE J530 Pipe ElbowsThis subcontract involves the manufacture or sourcing of a specialized pipe elbow, part number SAE J530 2-2 130239 with NSN 4730-01-500-9598, to support prime contractors working with the DLA Weapons Support Fluid Handling Division. The supplier is responsible for delivering one completed unit that strictly adheres to the SAE J530 basic non-government standard dated February 1, 2024, the TDP Rev A Gen 2, and the DLA Master List of Technical and Quality Requirements RA001. The opportunity is categorized under NAICS code 336412 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of October 29, 2026, following the posting date of October 21, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7M3-27-T-0565

Solicitation SPE7M3-27-T-0565 is a fixed-price procurement issued by the DLA Weapons Support Fluid Handling Division for one tube reducer, identified as NSN 4730001770450 and Pratt & Whitney Canada Corp part number 3018215. This is a critical application item requiring Class 3 threads. The requirement is part of a Foreign Military Sales program for Turkey, with delivery specified as 20 days after order and an original required delivery date of October 26, 2026. Shipping is designated as FOB Origin, and the item is to be delivered to a facility in Turkey. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List under RA001, and inspection and acceptance will occur at the point of origin per FAR 52.246-2. Invoicing must be processed electronically through the Wide Area WorkFlow system. This acquisition is not a small business set-aside and falls under NAICS code 332996. Compliance with various federal regulations is required, including the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and prohibitions on certain foreign telecommunications equipment.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7M4-27-T-1495

Solicitation SPE7M4-27-T-1495 is a request for quotations from the Defense Logistics Agency for the procurement of two helical compression springs, identified by NSN 5360-00-981-4049. This requirement is designated as an Air Force Critical Safety Item and is a total small business set-aside under NAICS code 332613. The delivery is required 154 days after order, with a need ship date of April 6, 2027, and a final delivery destination at Arizona Industries for the Blind in Phoenix, Arizona. All quotes must be submitted via the DIBBS portal by November 2, 2026. The contract mandates strict quality and compliance standards, requiring the manufacturer's quality management system to comply with SAE AS9100 or an equivalent standard. Origin inspection and acceptance are required per FAR 52.246-2. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for heat-sealed barrier bags and palletization according to RP001. Offerors must comply with the Buy American Act and the Berry Amendment, disclosing any non-domestic materials used. Additionally, the solicitation prohibits the use of additive manufacturing unless specifically authorized and requires representations regarding covered telecommunications equipment. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

Spring Manufacturing

POSTED

about 19 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-27-T-1497

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7M3-27-Q-0009

Solicitation SPE7M3-27-Q-0009 is a firm fixed price procurement issued by the DLA Weapons Support Fluid Handling Division for one pipe elbow, identified by part piece number SAE J530 2-2 130239 and NSN 4730-01-500-9598. The requirement must adhere to the SAE J530 basic non-government standard revision dated February 1, 2024, and TDP Rev A Gen 2. Delivery is required within 300 days after receipt of order, with a requested delivery date of June 3, 2026. The item is to be shipped via traceable means to the National Guard Aviation Support Facility in Williamstown, West Virginia, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while requiring palletization per RP001. Technical and quality requirements from the DLA Master List take precedence over general packaging standards. Invoicing must be processed through the Wide Area WorkFlow system. This is a full and open competition and is not a small business set-aside. Offerors must be registered in SAM and certify that any provided surplus material is new, unused, and conforms to all technical specifications. The procurement incorporates various FAR and DFARS clauses, including the Buy American program and prohibitions on certain internal confidentiality agreements.

POSTED

about 19 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-1517

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-27-T-1522

Solicitation SPE7M4-27-T-1522 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 70 nonmetallic hose assemblies (NSN 4720-01-418-0303). The requirement allows for an exception to drawing 12365278, permitting the use of a standard Aeroquip Mylar tag with Gettig 4010 clear poly tape in place of sleeving per MIL-DTL-23053. Delivery is required within 28 days after receipt of order, with shipments delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract incorporates stringent quality and regulatory requirements, including supply chain traceability documentation, physical identification per MIL-STD-130N, and adherence to the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring authorized access and JCP certification. Additionally, the award is subject to the Buy American Act, Berry Amendment, and cybersecurity standards including DFARS 252.204-7012 and CMMC Level 2. Invoicing must be processed electronically through the Wide Area WorkFlow system.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-1506

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

CAP, QUICK DISCONNECT

Solicitation # SPE7M3-27-T-0567

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

HOSE ASSEMBLY, METALLIC

Solicitation # SPE7M4-27-T-1496

Solicitation SPE7M4-27-T-1496 is issued by the Defense Logistics Agency Weapons Support Fluid Handling Division for the procurement of 19 metallic hose assemblies, identified by NSN 4720-01-444-8576. The items must be manufactured according to TDP Rev B Gen 2 and delivered to DLA Distribution Cherry Point, North Carolina, within 162 days after order. This is not a small business set-aside, and the procurement falls under NAICS code 326220. The contract mandates strict quality and compliance standards, including CMMC Level 2 certification and adherence to the Buy American Act and Berry Amendment. Technical data is subject to ITAR and EAR export controls, requiring approved JCP certification for access. Quality assurance involves zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the use of Class I ozone-depleting chemicals is strictly prohibited. Invoicing is to be processed electronically through the Wide Area Workflow system.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-1501

Solicitation SPE7M4-27-T-1501 is issued by the Defense Logistics Agency (DLA) Weapons Support Fluid Handling Division for the procurement of eight air duct hoses. The specified items must have a nominal inner diameter of 3/4 inches and a nominal overall length of 5.0 inches, identified by NSN 4720-01-306-1028. The contract is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. Delivery is required by January 12, 2027, with terms set as FOB Origin and the place of performance located in Tracy, California. Technical eligibility for award requires offerors to have an approved US/Canada Joint Certification Program certification and DLA approval to access export-controlled data, as the item is subject to ITAR or EAR regulations. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and packaging must adhere to ASTM D3951, MIL-STD-129, and RP001 standards. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. The procurement also mandates adherence to the Buy American Act, the Berry Amendment, and specific cybersecurity standards, including NIST SP 800-171 and CMMC Level 2 requirements.

Fabric Coating Mills

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS