Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Environmental Testing Laboratory / Field Sampling Firm

Active

State & Local

Response Deadline11/16/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized environmental testing and field sampling services for water projects located in Murray City, Utah. The selected firm will be responsible for conducting targeted groundwater sampling at the Hyland Well and 500 East Well using low-flow sampling pumps. The primary objective is to perform laboratory analysis specifically for PFAS and PFOA compounds to ensure water quality and safety. To qualify for this engagement, the service provider must utilize a NELAP accredited laboratory that holds specific certification for PFAS analysis. The final deliverables for the contract consist of certified laboratory analytical reports. Interested parties should note that the response deadline for this opportunity is November 16, 2026.

General Info

Environmental testing for PFAS/PFOA in Murray City, Utah, due November 16, 2026.

Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

UT, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-43.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Engineering Services- PFAS Evaluation and Source Development Study

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUtah

ContactsNo contacts available

OfficeN/A

Organization / AgencyUtah

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs targeted sampling and laboratory analysis of groundwater for prime contractors on Murray City, Utah water projects. Collects groundwater samples from Hyland Well and 500 East Well using low-flow sampling pumps and performs laboratory analysis for PFAS/PFOA compounds. Requires a NELAP accredited laboratory certified for PFAS analysis. Delivers certified laboratory analytical reports.

Similar Contracts

Same NAICS industry code

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Warehouse, Warehouse Storage Area, and Gymnasium. Specifically, the project estimates the removal of approximately 3,600 square feet of floor tile in the warehouse areas and 600 square feet in the gymnasium if ACM is confirmed. All work must be performed by licensed contractors using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. This solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, acceptance of terms and conditions, proof of insurance, and three professional references by October 21, 2026, at 3:00 PM CT. Award selection will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination SCA 2015-5019 Rev 31, and requires strict adherence to Department of Labor records management, training, and privacy breach notification requirements. Final acceptance of work is contingent upon the submission of all laboratory reports, waste manifests, and a final project completion report.

Joliet Job Corps

POSTED

about 6 hours ago

DEADLINE

Potable Water Testing and Biological AnalysisThis subcontract involves providing specialized laboratory testing services to ensure drinking water safety for prime contractors on CalVet projects at the Veterans Home of California in Redding. The scope of work requires the performance of semi-annual biological drinking water and coliform analysis to identify potential contaminants. To qualify, the service provider must utilize certified laboratory facilities and maintain current state or EPA certification for drinking water analysis. The project is managed under the California Department of Veterans Affairs and falls under NAICS code 541380. The selected contractor is responsible for delivering formal certified laboratory analysis reports documenting the results of the coliform and biological testing. The solicitation was posted on October 16, 2026, with a response deadline of October 30, 2026.

California Department of Veterans Affairs

POSTED

about 13 hours ago

DEADLINE

26RS0012 - Water Testing and Analysis Services

Solicitation # 26RS0012

Solicitation 26RS0012 is a Small Business set-aside for the California Department of Veterans Affairs to obtain water testing and analysis services for the Veterans Home of California Redding. The contractor must provide all labor, equipment, and materials for the complete water analysis and preventative maintenance of potable drinking water, chilled and hot water systems, and condenser/cooling tower systems. Key responsibilities include quarterly assessments, semi-annual biological drinking water and Legionella control programs, annual cooling tower treatments, and necessary repairs to the Dolphin Transformer Panel, Coil Pipe assembly, and Webmaster One controller. The contractor is responsible for all sampling supplies, including bottles and coolers, and must provide safety data sheets for all chemicals delivered. To be eligible, the contractor must be a DGS-certified Small Business, Micro Business, or Disabled Veteran Business Enterprise and an authorized service provider for Evapco Cooling Towers and the Dolphin Water Treatment system series 3000. Personnel must hold a California Department of Pesticide Regulation Qualified Applicators License in Aquatic and Microbial Pest Control categories, and the contractor must provide at least two factory-trained certified technicians. Insurance requirements include Commercial General Liability of 1 million dollars per occurrence, Professional Liability of 1 million dollars per claim and 3 million dollars aggregate, and mandatory Workers Compensation. The contract will be awarded to the lowest responsive responsible quote, and the state maintains the right to terminate the agreement with thirty days written notice.

California Department of Veterans Affairs

POSTED

about 13 hours ago

DEADLINE

Scientific Instrument Performance TestingThis subcontract opportunity involves providing scientific instrument performance testing for prime contractors working on projects for the Government of Ontario Ministry of Environment, Conservation and Parks. The selected provider will be responsible for verifying the measurement accuracy of handheld photosynthesis meters, specifically focusing on water vapour loss and CO2 uptake. These evaluations are to be conducted in either field or laboratory settings using reference plant materials or calibration gases, culminating in the delivery of a detailed performance testing report. Qualified candidates must possess technical certification in instrument calibration or plant physiology to ensure the precision of the testing. Interested parties should note that the response deadline is November 6, 2026, with the project falling under NAICS code 541380.

Environment, Conservation and Parks

POSTED

about 16 hours ago

DEADLINE

CalEPA-Certified Laboratory Analysis ServicesThis subcontract opportunity with the California Department of Transportation involves providing specialized chemical analysis and testing services for waste streams on maintenance projects. The selected provider will be responsible for sampling and testing contaminated soil, liquids, and lab-packed materials to develop accurate waste profiles, ensuring full compliance for disposal processes. A critical requirement for this engagement is that the service provider must hold a CalEPA-certified Environmental Laboratory Accreditation Program certification. The primary deliverables include certified laboratory test reports and comprehensive waste stream profiles, with performance centered in Del Norte. Interested parties must respond by November 3, 2026.

California Department of Transportation

POSTED

about 17 hours ago

DEADLINE

Specialized Structural Inspection & TestingThe Specialized Structural Inspection and Testing subcontract for OC Public Works involves providing technical specifications and oversight for structural material inspection and testing. The selected contractor will be responsible for defining testing requirements, preparing special inspection specifications, and conducting final structural punch-lists to ensure project compliance. Key deliverables include special inspection requirements documents, detailed inspection reports, and completed final punch-lists. Qualified candidates must hold ICC Certification or an equivalent professional credential. This opportunity is categorized under NAICS code 541380 and is open for responses until December 4, 2026. Interested parties can find further details through the OC Public Works procurement portal.

OC Public Works

POSTED

about 18 hours ago

DEADLINE

in about 2 months

Post-Operation Wetted Materials AnalysisThis subcontract, titled Post-Operation Wetted Materials Analysis, involves providing technical examination services for prime contractors working on UK Atomic Energy Authority projects. The primary objective is to analyze materials that have been exposed to tritium during rig operations, with a particular emphasis on evaluating the performance and degradation of polytetrafluoroethylene (PTFE). The selected provider will be responsible for delivering a comprehensive material analysis report that details the condition and compatibility of the examined materials. This opportunity was posted on October 16, 2026, with a response deadline of November 16, 2026, and falls under NAICS code 541380.

UK Atomic Energy Authority

POSTED

about 18 hours ago

DEADLINE

Vacuum Pump Tritium Testing

Solicitation # T044MN26

The UK Atomic Energy Authority has issued solicitation T044MN26 to commission an organization to design, manufacture, commission, and operate a tritium-compatible test rig. This rig must replicate the operating conditions of the Vacuum and Impurity Treatment System (VAC-ITS) and be hosted at the contractor's own licensed facility. A critical component of the project involves performing a post-operation examination of wetted materials, with a specific emphasis on polytetrafluoroethylene (PTFE). The estimated contract value is 400,000 GBP excluding VAT, with a performance period running from December 21, 2026, to April 30, 2027. The procurement process is open to small and medium-sized enterprises, with a tender submission deadline of November 16, 2026. Award decisions will be based on a weighted evaluation consisting of 60 percent quality and 40 percent price. Administration of the contract is managed by Maili Nugent at the Culham Science Centre. All proposals must be submitted in English via the designated electronic portal.

UK Atomic Energy Authority

POSTED

about 18 hours ago

DEADLINE

Third-Party Quality Inspection and SamplingThis subcontract for Third-Party Quality Inspection and Sampling supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform independent sampling and inspection for prime contractors specifically for the 4820-01-223-8097 valve. Work involves executing sampling plans according to MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes using zero-based sampling plans, precision measurement, and pressure testing equipment. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in Jacksonville, Florida. The contractor is responsible for delivering comprehensive inspection reports and certifications of conformance. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Aerospace NDT and Heat TreatmentThis subcontract for the Defense Logistics Agency involves providing specialized material validation, heat treatment, and non-destructive testing services for aircraft trainer pod projects. The scope of work focuses on ensuring structural integrity through critical processes including X-ray and penetrant inspections, with a requirement for the delivery of certified test reports and detailed heat-treatment logs. Qualified providers must maintain aerospace testing certifications and strictly adhere to ITAR and EAR compliance standards. The project falls under NAICS code 541380 and is managed through the Department of Defense to support prime contractors in meeting rigorous aerospace safety and quality specifications.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Critical Application Testing and InspectionThe Critical Application Testing and Inspection subcontract involves providing specialized pressure testing and non-destructive inspection services for prime contractors supporting DLA Land and Maritime fluid handling projects. Based in Mechanicsburg, Pennsylvania, the scope of work includes conducting hydrostatic pressure testing, dye penetrant inspection, and X-ray or ultrasonic testing to ensure the internal integrity of galleries. The successful provider must deliver detailed inspection reports and formal pressure test certifications. To qualify for this engagement, the contractor must employ NDT technicians holding Level II or III certifications. This opportunity is managed under the Department of Defense Fluid Handling Division with a NAICS code of 541380. Interested parties should note the response deadline of October 21, 2026.

FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Third-Party Aerospace Quality Testing and CertificationThis subcontract for Third-Party Aerospace Quality Testing and Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent quality testing and verification, utilizing sampling methods per MIL-STD-1916 or ASQ H1331 and executing tests defined in QAP I3873 QAP-020. All work must be conducted using calibrated M&TE per RT001, with final deliverables consisting of detailed test reports and certifications of compliance. To be eligible, the contractor must hold ISO/IEC 17025 accreditation and maintain CMMC Level 2 certification for the secure handling of technical data. This opportunity falls under NAICS code 541380 and is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

More opportunities from Utah

Same awarding agency

Specialized Pest Remediation (Bed Bugs, Rodents, and Stinging Insects)This subcontract for Specialized Pest Remediation focuses on providing targeted pest control services for prime contractors managing projects at Snow College. The scope of work includes annual tree treatments for stinging insects, interior treatments for mice and spiders, and comprehensive bed bug remediation. For bed bug infestations, the contractor is required to perform inspections and utilize both chemical treatments and industrial heat treatments supported by thermal monitoring. The contract is categorized under NAICS code 561790 and is managed through the state of Utah. Interested parties must adhere to the solicitation timeline, with the opportunity posted on October 15, 2026, and a response deadline set for October 29, 2026. The primary objective is the delivery of professional remediation for specific infestations across the campus.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Recurring Campus Pest Control ServicesThis subcontract for Recurring Campus Pest Control Services involves providing monthly maintenance for prime contractors on Snow College campus projects. The selected provider is responsible for conducting 12 scheduled visits per year, which include exterior treatments for campus and housing buildings as well as specialized treatments for designated food service areas. The contractor must supply all necessary labor, pesticides, and monitoring devices to ensure a pest-free environment. Key deliverables include the maintenance of a pest-free campus and the provision of quarterly exterior treatment verification. This opportunity is categorized under NAICS code 561790 and is managed through the state of Utah. Interested parties must submit their responses by the deadline of October 29, 2026.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

SNOC262710010 -- Pest Control Services

Solicitation # SNOC26271010

Snow College is soliciting bids under solicitation number SNOC26271010 to establish a contract for comprehensive pest control services across its campus facilities and student housing. The selected vendor will be responsible for providing all labor, materials, equipment, and supervision necessary to maintain a safe and healthy environment. The scope of work includes twelve monthly visits covering food service areas and exterior building treatments, one annual tree treatment for stinging insects, and various as-needed services such as interior spider and mouse treatments, as well as bed bug inspection and chemical or heat treatments. The contract will be awarded to the responsive and responsible bidder offering the lowest total annual bid price. The contractor must comply with all federal and state laws, including specific non-discrimination mandates and the Governmental Immunity Act of Utah. Payment terms are net thirty days following the delivery of services or receipt of a correct invoice, with payments remitted via mail or purchasing card. All orders are shipped F.O.B. Destination, and the contractor retains liability for loss or damage until final inspection and acceptance by Snow College. To be considered responsive, bidders must submit a completed bidding sheet and a Form W-9, certifying that all costs are included in the bid price without additional unauthorized charges for travel or supplies.

Exterminating and Pest Control Services

POSTED

DEADLINE

Drinking Water Regulatory SpecialistThis subcontract for a Drinking Water Regulatory Specialist involves performing regulatory audits and compliance framework analysis specifically for PFAS/PFOA in municipal drinking water. Supporting prime contractors on water projects in Murray City, Utah, the specialist will summarize regulatory requirements and define reporting levels for the Hyland and 500 East Wells sites. The role requires close coordination with the Utah Division of Drinking Water and various federal agencies to ensure all standards are met. The scope of work includes evaluating sampling results against specific compliance calculations to determine adherence to safety and legal mandates. Key deliverables for this engagement consist of a comprehensive regulatory evaluation summary and a detailed compliance schedule. The opportunity is categorized under NAICS code 541620, with a response deadline set for November 16, 2026.

Environmental Consulting Services

POSTED

DEADLINE

in about 1 month

Water Treatment Process Engineer (PFAS Specialist)This subcontract opportunity is for a Water Treatment Process Engineer specializing in PFAS mitigation to support prime contractors on water projects in Murray City, Utah. The selected specialist will be responsible for analyzing the efficacy of various PFOA removal methods, specifically focusing on Ion Exchange, Granular Activated Carbon, and membrane processes. Key deliverables include the development of mitigation plan strategies and a comprehensive alternatives comparison matrix. The role requires a licensed Professional Engineer to utilize process simulation software for creating detailed life-cycle, operation and maintenance, and capital cost estimates. Interested parties should note the response deadline of November 16, 2026, for this engineering services contract categorized under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

in about 1 month

Hydrogeologic Consultant / Groundwater Source DevelopmentThis subcontract opportunity is for a Hydrogeologic Consultant to support prime contractors on water projects for Murray City, Utah. The selected consultant will perform technical evaluations of groundwater source development and hydrogeologic feasibility, which includes reviewing well records, production data, and water-quality data to identify material gaps and evaluate deeper aquifer concepts. The final deliverables for this engagement are comprehensive hydrogeologic feasibility analyses and specific source development recommendations. To qualify for this role, the consultant must possess a Professional Geologist or Professional Engineer license and have access to specialized hydrogeologic modeling software. The project falls under NAICS code 541620. Interested parties must submit their responses by the deadline of November 16, 2026.

Environmental Consulting Services

POSTED

DEADLINE

in about 1 month

Mezzanine Electrical InstallationThis subcontract for Mezzanine Electrical Installation involves performing electrical work for new mezzanine structures on facility projects located in Summit County, Utah. The scope of work includes the installation of electrical conduits, wiring, lighting fixtures, and power receptacles specifically for bike charging, all of which must be integrated into the existing warehouse electrical system. The selected contractor is expected to utilize professional conduit benders and testing equipment to deliver a fully operational electrical system. To be eligible for this project, the contractor must employ a Licensed Master Electrician in the state of Utah. The solicitation was posted on October 15, 2026, with a response deadline of November 5, 2026. This opportunity falls under NAICS code 238210 and is intended for those capable of working under prime contractors to complete the specified electrical infrastructure.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Structural Steel Erection and InstallationThis subcontract for Structural Steel Erection and Installation involves the fabrication and installation of structural steel mezzanines for prime contractors on facility projects located in Summit County, Utah. The scope of work includes unloading and staging materials, erecting steel columns, beams, and decking, and securing the final structure to warehouse floors and walls utilizing cranes, forklifts, and hoisting equipment. The end goal is the delivery of a fully installed and plumb structural steel mezzanine. To be eligible, contractors must hold a valid Utah Contractor License and maintain strict compliance with OSHA safety standards. The solicitation was posted on October 15, 2026, with a response deadline of November 5, 2026. This project falls under NAICS code 238120 and is managed through the state of Utah.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Structural Steel FabricationThis subcontract for structural steel fabrication involves the production of mezzanine system components for prime contractors operating on facility projects within Summit County, Utah. The scope of work includes the cutting, welding, and assembly of structural steel members using CNC cutting tools and welding equipment, as well as the application of required coatings or finishes. All structural welds must be performed by personnel holding AWS certifications, and the contractor is responsible for delivering the finished components to the project site in Park City. The opportunity was posted on October 15, 2026, with a response deadline of November 5, 2026. Classified under NAICS code 332312, this project is managed through the state of Utah. Interested parties can find further details and submission guidelines via the provided Bonfire hub link.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Mezzanine Structural Engineering and DesignThis subcontract for Mezzanine Structural Engineering and Design involves providing professional engineering and design services for structural steel mezzanine systems on facility projects located in Summit County, Utah. The selected contractor is responsible for engineering the systems to meet specific RFB dimensions and producing final drawings using CAD or BIM software. All work must comply with the International Building Code and applicable local codes, with final deliverables consisting of stamped design documents and engineered drawings. A critical requirement for this engagement is that the performing engineer must hold a valid Professional Engineer license in the State of Utah. The solicitation was posted on October 15, 2026, with a response deadline of November 5, 2026. This project falls under NAICS code 541330 and is managed through the state of Utah.

Engineering Services

POSTED

DEADLINE

Specialized Mechanical Mulcher (Bullhog) Equipment SupplyThis subcontract involves the supply of specialized mechanical mulching and shredding equipment, such as Bullhog type machinery, for prime contractors working on State of Utah Division of Wildlife Resources projects. The required equipment must be mobile, utilizing tracked or wheeled configurations with hydraulic or PTO drives, and must be capable of shredding live trees up to 26 inches in diameter. To ensure operational efficiency and environmental compliance, the machinery must feature integrated GPS systems with an accuracy of plus or minus 10 meters and support high-pressure washing to prevent the spread of weeds. The selected provider is responsible for delivering fully operational equipment directly to the project sites. This opportunity is categorized under NAICS code 532412 and was posted on October 15, 2026, with a response deadline of October 27, 2026.

Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Mechanical Mastication and Tree Shredding ServicesThis subcontract for Mechanical Mastication and Tree Shredding Services involves the mechanical removal and shredding of green and dead Pinyon, Juniper, and Oak trees for prime contractors working on State of Utah Division of Wildlife Resources projects. The scope of work requires the treatment of 1,326.7 acres of land, utilizing GPS-capable Bullhog-type equipment and high-pressure washing systems. Specific operational requirements include shredding live trees up to 26 inches in diameter, cutting stumps at 12 inches above ground, and ensuring fuel beds are managed to a depth of no more than 6 inches. The opportunity is categorized under NAICS code 561730 and is associated with the state of Utah. Interested parties must adhere to the timeline established by the posting date of October 15, 2026, with a response deadline set for October 27, 2026.

Landscaping Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS