Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Equipment Installation and Commissioning Services

Active

International

Response Deadline10/23/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Equipment Installation and Commissioning Services supports prime contractors on projects for the National Research Council of Canada. The scope of work involves the physical installation, electrical hook-up, and operational commissioning of mixing systems. Key responsibilities include unpacking and positioning equipment, connecting systems to 120 V/240 V 60 Hz power, testing safety interlocks, and conducting final performance commissioning to ensure the system is fully operational. The project requires the use of licensed electricians and strict adherence to CSA safety standards. The final deliverables include a fully commissioned system and the provision of training for relevant personnel. Interested parties should note the response deadline of October 23, 2026, for this Canada-based engagement.

General Info

Subcontract for mixing system installation, electrical hook-up, and commissioning by October 23, 2026.

Agency

Government of Canada → National Research Council of Canada

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

This scope was carved out of 26-58184.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Asymmetric Centrifugal Mixer

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → National Research Council of Canada

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs physical installation, electrical hook-up, and operational commissioning for prime contractors on National Research Council of Canada projects. Unpacks and positions equipment, connects system to 120 V/240 V 60 Hz power, tests safety interlocks, and conducts performance commissioning. Requires licensed electricians and adherence to CSA safety standards. Delivers a commissioned, operational mixing system and trained personnel.

Similar Contracts

Same NAICS industry code

Dimensional Tool Calibration (Gauges, Calipers, UCAD)This subcontract involves providing high-precision dimensional calibration services for measurement tools used by prime contractors on Mississippi Department of Public Safety projects. The scope of work includes the calibration of seven gauge blocks, three calipers, and four to five UCAD units utilizing specialized equipment such as laser interferometers, optical flats, or high-precision surface plates. To qualify for this engagement, the service provider must hold ISO/IEC 17025 accreditation specifically covering dimensional metrology. The primary deliverable for these services is the provision of formal calibration certificates. The solicitation was posted on October 9, 2026, with a response deadline of November 10, 2026, under NAICS code 811210.

MS DEPT of PUBLIC SAFETY

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Centrifuge, Autoclave, and Pressure/Flow CalibrationThis subcontract involves the calibration and certification of mechanical laboratory equipment and pressure and temperature tools for prime contractors supporting the Mississippi Department of Public Safety. The scope of work includes the calibration of 36 centrifuges, 6 autoclaves, pressure gauges, flow meters, and thermometer eutectics utilizing tachometers and pressure calibrators. The selected provider must deliver detailed calibration certificates and performance reports upon completion. A critical requirement for this engagement is that the contractor must hold ISO/IEC 17025 accreditation for the specific equipment types being serviced. The project falls under NAICS code 811210, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Balance, Pipette, and Volumetric Glassware CalibrationThis subcontract for the Mississippi Department of Public Safety involves the precision calibration of weighing and liquid handling equipment for prime contractors. The scope of work includes the calibration of 70 balances, 11 scales, 162 pipettes, and 32 graduated cylinders. All services must be performed using NIST-traceable weights and gravimetric testing equipment, with the final delivery requiring individual calibration certificates for every instrument. To be eligible, the provider must hold ISO/IEC 17025 accreditation specifically covering mass and volume calibration. The project falls under NAICS code 811210, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Bid Solicitation for Annual Calibration of instruments and equipment for all branches of MS Forensic Laboratory

Solicitation # 3160008306

The Mississippi Department of Public Safety is soliciting bids for a contract to provide annual equipment certification and calibration services for all branches of the Mississippi Forensic Laboratory. The scope of work includes both general and onsite field calibration for a wide array of laboratory equipment, including chemical fume hoods, balances, centrifuges, pipettes, biosafety cabinets, and various measurement tools. Services will be performed across multiple laboratory locations, including Pearl, Batesville, Meridian, Gulf Coast, and Oxford. The initial contract term is 48 months, with a possible one-year renewal option subject to approval. To be considered responsive, bidders must have at least one year of experience in the field, maintain a pool of qualified workers, and hold current ISO/IEC 17025 accreditation that specifically covers the required services and field calibrations. Evaluation is based on a pass/fail assessment of qualifications and a reference scoring system requiring a minimum total score of 21 across three references. The contract will be awarded to the lowest responsible and responsive bidder. Required submission documents include a bid cover sheet, the bid itself, references, and certifications and assurances. Bidders must also maintain professional liability insurance of at least 1,000,000 dollars per occurrence and name the Department of Public Safety as an additional insured.

MS DEPT of PUBLIC SAFETY

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Control Motor Teardown, Evaluation, and Repair ServicesThis subcontract involves the teardown, evaluation, repair, and modification of Control Motors under NSN 016742634 for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes disassembling the motors to identify wear, executing repairs according to technical orders and drawings, and conducting final inspections and testing based on OEM specifications to deliver one fully repaired and tested unit. The project is categorized under NAICS code 811210 and is managed by the Department of Defense. To be eligible, the contractor must possess the specific tooling required for NSN 016742634 and maintain CMMC compliance. The response deadline for this opportunity is November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

in about 1 month

PWR ELECTRONIC MOD Repair and Modification ServicesThis subcontract involves providing repair and modification services for Power Electronic Modules supporting Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work includes the teardown, evaluation, repair, and modification of 51 units under NIIN 016487160. All work must be performed according to original manufacturer specifications, technical orders, and drawings, with physical identification and marking adhering to MIL-STD-130, REV N. The contractor is required to possess specialized tooling for electronic module overhaul and must be capable of supporting Government Source Inspection. This project falls under NAICS code 811210 and requires the delivery of 51 fully repaired and tested units.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

Precision Calibration ServicesThe Precision Calibration Services subcontract involves the calibration of electronic test and measurement equipment for prime contractors supporting Navsup Weapon Systems Support projects. The scope of work specifically focuses on equipment used for PXI Chassis RFI certification, requiring all calibrations to be performed using standards traceable to national benchmarks. To ensure technical accuracy and quality, the contractor must maintain strict compliance with ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. The primary deliverables for this engagement include the return of calibrated test equipment accompanied by official calibration certificates. This opportunity falls under NAICS code 811210 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Specialized Repair and Modification of Fuel Injector TestersThis subcontract with the Department of Defense for Navsup Weapon Systems Support involves the specialized repair and modification of seven fuel injector testers. The scope of work includes the teardown, evaluation, diagnosis, and repair of units to ensure they are returned to operational status in accordance with NSN 4910-01-667-7734 SX and Reference Number 98869 H9300T-53. To ensure certification and compliance, the contractor must utilize specific testing equipment and adhere to FED STD 313 and OSHA 29 CFR 1910.1200 standards. The project is categorized under NAICS code 811210, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Specialized Repair and Modification of PUMP UNIT, L/O KEEPThis subcontract involves the specialized repair and modification of a L/O KEEP pump unit, identified by NSN 4320-01-614-8491, for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes the complete teardown and evaluation of the unit to identify defects, followed by repairs executed according to original manufacturer drawings and specifications. To ensure operational readiness, the contractor must perform performance validation testing and coordinate closely with Government Source Inspection. The project is managed under the Department of Defense with a NAICS code of 811210. The final deliverable is one fully repaired and tested pump unit. Interested parties should note the response deadline of October 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

Rotary Pump Teardown, Evaluation, and Repair ServicesThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the teardown, technical evaluation, repair, and modification of Rotary Pumps under NIIN 013190084. The scope of work requires the disassembly of pumps to identify worn components, performing repairs according to OEM specifications and drawings, and completing all necessary testing to ensure the assets are fully functional. All deliverables must adhere to CAGE Code 59180 and MIL-STD-130 identification standards. The project falls under NAICS code 811210, with a response deadline set for October 23, 2026. The final objective is the delivery of fully repaired and tested rotary pumps to the prime contractors.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

Test Equipment Calibration ServicesThis subcontract for Test Equipment Calibration Services supports Navsup Weapon Systems Support IEP Module projects for the Department of Defense. The selected provider will be responsible for the calibration of electronic test sets and measurement tools used by prime contractors to validate modules. All work must be performed in strict adherence to ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. The primary deliverables for this engagement include the delivery of calibrated test equipment along with the necessary certification reports. This opportunity falls under NAICS code 811210, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Heat Exchanger Teardown, Evaluation, and Repair ServicesThis subcontract involves the teardown, evaluation, and repair of Navy heat exchangers, specifically NSN 4420-12-396-4379, for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes disassembling units to identify wear, executing repairs according to technical orders and drawings, and conducting testing based on original manufacturer specifications. The contractor must ensure strict compliance with MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging while supporting Government Source Inspection. This project falls under NAICS code 811210 and is managed under the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Preventative Maintenance and Calibration ServicesThis subcontract for the National Research Council of Canada involves providing recurring preventative maintenance and precision calibration services for prime contractors. The scope of work focuses on inspecting servo-driven components, testing safety interlocks, and calibrating mixing speeds and durations to ensure research repeatability. To qualify, service providers must utilize precision calibration tools and employ OEM-certified technicians, with final deliverables including detailed maintenance logs and official calibration certificates. The opportunity is categorized under NAICS code 811210 and is performed within Canada. Interested parties must submit their responses by the deadline of October 23, 2026. This engagement is designed to maintain the high technical standards required for government research projects through rigorous equipment upkeep and certified validation.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

High-Capacity Asymmetric Centrifugal Mixer SupplyThis subcontract involves the supply of one high-capacity, bladeless, dual asymmetric centrifugal mixing system for prime contractors working on National Research Council of Canada projects. The system must be capable of handling batches up to 1,000 g or 2 L and must integrate servo-driven motion control with a touchscreen user interface to facilitate the simultaneous mixing and deaeration of high-viscosity materials. Technical requirements specify that the equipment must be CSA Certified and compatible with 120 V/240 V 60 Hz electrical standards. The final delivery must include the mixing system and all necessary operational manuals. This procurement is managed under the Government of Canada for performance within Canada.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Asymmetric Centrifugal Mixer

Solicitation # 26-58184

The National Research Council of Canada, specifically the Department of Advanced Materials for Additive Manufacturing Team within the Quantum and Nanotechnologies Research Centre, is seeking the supply of one high-capacity asymmetric centrifugal mixer. This bladeless mixing system is intended for laboratory-scale development of advanced material formulations, including polymers, composites, adhesives, inks, and slurries. The equipment must be capable of processing batches up to 1,000 g or 2 L and must provide simultaneous mixing and deaeration of high-viscosity and particle-filled materials to ensure consistent, repeatable, and contamination-free results. Key technical requirements include servo-assisted motion control, an integrated touchscreen user interface for programming speed and duration, and the inclusion of all necessary container holders and adapters. For safety and compliance, the system must feature an emergency stop, safety interlocks on access doors, and CSA certification or an equivalent safety standard. All electrical components must be compatible with standard Canadian voltages of 120 V/240 V at 60 Hz, and all manuals and equipment information must be provided in English. The equipment is scheduled for delivery by March 31, 2027, with installation and commissioning to be completed within six months of delivery. This presolicitation, identified by solicitation number 26-58184, requires interested suppliers to submit a statement of capabilities by October 23, 2026, demonstrating that their system satisfies all mandatory technical requirements.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Laboratory-Scale Gas Atomizer

Solicitation # 26-58041B

The National Research Council of Canada is soliciting proposals for the supply, delivery, and installation of a laboratory-scale Gas Atomizer to be located at the Clean Energy Innovation facility in Mississauga. The system is intended to produce high-quality, spherical metal and alloy powders, specifically requiring a production capacity of at least 1 kg of steel or equivalent alloys per cycle. Key technical requirements include compatibility with a wide range of metals such as iron, copper, aluminum, nickel, and cobalt, the use of argon, helium, or nitrogen gases, and the inclusion of a cyclone separator for particles smaller than 10 microns. The equipment must be CSA certified, not exceed 40 kW in power consumption, and be capable of cooling rates of at least 10^5 K/s. The procurement process involves a two-stage evaluation where bidders must first pass a mandatory technical assessment based on 17 specific criteria before undergoing a financial evaluation based on the total aggregated fixed price. The contract follows a milestone-based payment structure, with payments triggered by design freeze, Factory Acceptance Testing, delivery, installation, Site Acceptance Testing, and training. The total delivery and installation timeline is 28 weeks from the contract date, consisting of 24 weeks for delivery and 4 weeks for installation and training. Bidders must demonstrate relevant experience by providing at least two examples of custom laboratory-scale Gas Atomizer projects completed within the last five years.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Engineering Services and Support Related to the Convair 580 Aircraft

Solicitation # 26-58151

The National Research Council of Canada is seeking a five-year Standing Offer for engineering services and support for a Convair 580 aircraft operated by the Flight Research Laboratory. Because the aircraft undergoes frequent modifications and operations outside its original design purpose, the council requires specialized support from the holder of the aircraft's Type design and intellectual property to ensure continued operational safety and functionality. The scope of work encompasses a wide range of technical services, including engineering analysis for aerodynamics and flight loads, the procurement and machining of raw materials for pylons and hardpoints, and the provision of design or manufacturing data. Additionally, the contract covers ongoing maintenance, repair, technical support, and the procurement of necessary components to support external sensors and other aircraft modifications.

Engineering Services

POSTED

DEADLINE

Active Vibration Isolation System compatible with a Thermo Fisher Scientific Verios 5 Ultra High Resolution Scanning Electron Microscope (UHR-SEM)

Solicitation # 26-58154

The National Research Council Canada is soliciting proposals for the acquisition of one Active Vibration Isolation (AVI) system compatible with a Thermo Fisher Scientific Verios 5 Ultra High Resolution Scanning Electron Microscope (UHR-SEM). The system is required to eliminate low-frequency mechanical vibrations and environmental noise that currently hinder high-magnification imaging. The successful contractor must provide a comprehensive package including the AVI system, installation, on-site training, documentation, and warranty support. All deliverables must be received at the delivery location in Ottawa, Ontario, by January 29, 2027. The AVI system must meet strict mandatory technical criteria, including a closed-loop feedback control system utilizing piezoelectric or geophone sensors and actuators, and the ability to provide isolation across all six degrees of freedom within a frequency range of 1 Hz to 200 Hz. The system must support a load capacity of 960 kg and be installable without powered lifting or rigging equipment. Compliance with the Canadian Electrical Code and the RoHS Directive is required. The contract will be awarded to the compliant offer with the lowest evaluated price. Proposals must be submitted electronically in three separate sections: technical, financial, and administrative declarations. The procurement is subject to the Policy on Reciprocal Procurement, limiting eligibility to Canadian suppliers and those from applicable trading partners. Additionally, all on-site personnel must maintain a valid Reliability Status NRC Security Screening Level. Payment will be made within 30 days of receiving an undisputed invoice.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Precision Equipment TransportThe Precision Equipment Transport subcontract involves the secure transportation of a high-value laboratory instrument for prime contractors working on National Research Council Canada projects. The scope of work specifically requires the hauling of a completed vacuum vessel to a facility located at 5071 West Saanich Road in Victoria, British Columbia. To ensure the integrity of the equipment, the contractor must utilize specialized crating and packaging designed to protect critical surface finishes and flanges during transit. This opportunity is categorized under NAICS code 484220 and is associated with the Government of Canada. The solicitation was posted on October 2, 2026, with a response deadline set for October 14, 2026. All performance activities will take place within British Columbia to support the operational requirements of the National Research Council.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Manufacturing Drawing DevelopmentThis subcontract involves the development of final manufacturing drawings for prime contractors supporting National Research Council Canada laboratory projects. The selected provider will be responsible for creating detailed assembly and manufacturing drawings that strictly adhere to Specification Drawing ME-000-08711 Rev. B. Utilizing CAD software, the contractor must also develop a comprehensive requirements compliance matrix and deliver all final manufacturing drawings along with associated product data sheets. The project is managed by the Government of Canada under the National Research Council of Canada, with performance taking place in British Columbia. Interested parties must submit their responses by October 14, 2026, following the posting date of October 2, 2026. The work falls under NAICS code 541330, focusing on specialized engineering design services.

Engineering Services

POSTED

DEADLINE

Helium Leak Testing and Vacuum CertificationThis subcontract for Helium Leak Testing and Vacuum Certification involves providing high-sensitivity leak detection services for prime contractors working on National Research Council Canada laboratory projects in British Columbia. The scope of work requires the use of mass spectrometers to conduct helium leak testing, ensuring that leak rates remain within the strict limit of 1x10-8 mbar·L/s, alongside performing high-vacuum cleanliness preparation. The successful contractor is responsible for delivering a vacuum-clean vessel and a formal Leak Test Report that details the methods used, the conditions of the test, and the final measured rates. This opportunity is categorized under NAICS code 811210 and is associated with the Government of Canada.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Vacuum Surface Treatment and FinishingThis subcontract for Vacuum Surface Treatment and Finishing involves providing specialized surface finishing services for prime contractors working on National Research Council Canada laboratory projects. The scope of work includes applying machined, brushed, or bead-blasted external finishes, as well as sanding or brushing internal vacuum surfaces. Additionally, the contractor is responsible for the full electropolishing of the vacuum vessel utilizing industrial tanks and bead blasters to deliver a final product with certified internal and external surface finishes. The project is associated with the Government of Canada and will be performed in British Columbia under NAICS code 332813. Interested parties should note that the opportunity was posted on October 2, 2026, with a response deadline of October 14, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

High-Vacuum Chamber FabricationThis subcontract involves the fabrication of a single cubic or rectangular high-vacuum vessel for prime contractors working on National Research Council Canada laboratory projects. The scope of work requires precision welding and assembly of a stainless steel chamber designed to achieve a vacuum level of 1x10-6 Torr. Key technical requirements include the installation of a hinged door and the integration of various flanges, specifically DN160CF, DN125CF, DN100CF, KF-50, KF-40, KF-25, and KF-16, with mounting features produced via CNC machining according to Drawing ME-000-08711 Rev. B. The project is categorized under NAICS code 332710 and will be performed in British Columbia. Interested parties must adhere to the timeline established by the Government of Canada, with the response deadline set for October 14, 2026. The final deliverable is one fully completed vacuum vessel meeting all specified technical and precision standards.

POSTED

DEADLINE

Supply of N7786C Polarization SynthesizerThis subcontract involves the manufacture and delivery of one N7786C Polarization Synthesizer to support prime contractors on projects for the National Research Council of Canada. The equipment is designed to provide deterministic and programmable control of the State of Polarization, which is essential for the characterization and testing of polarization-dependent components. A critical requirement of the unit is its ability to meet specific technical capabilities for managing rapidly varying polarization states. The project is categorized under NAICS code 334511 and will be performed in Ontario, Canada, excluding the National Capital Region. Interested parties must adhere to the timeline established by the Government of Canada, with the response deadline set for October 19, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS