This Government Contract opportunity from National Aeronautics And Space Administration was posted on August 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ERB ShopSabre CNC Router - Supplies

Closed

80NSSC26940990QFederal

Submission Closed08/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332710

New

DIBBS

Precision Machining and Fabrication of Valve ComponentsThis subcontract involves the precision machining and fabrication of internal valve components for the DLA Weapons Support Fluid Handling Division. The scope of work focuses on utilizing CNC mills and lathes to produce machined valve bodies and sub-assemblies for the 4820-01-223-8097 regulating valve, adhering to strict tolerances. To ensure quality standards, the performing contractor must maintain an AS9100 or ISO 9001 quality management system. The project is designated as a Total Small Business Set-Aside under NAICS code 332710 and is managed by the Department of Defense. Performance of the contract will take place in Jacksonville, Florida. Interested parties must respond by October 22, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Carbon Face Component FabricationThis subcontract for Precision Carbon Face Component Fabrication involves the precision machining and fabrication of carbon face elements to support prime contractors for DLA Distribution Cherry Point supply contracts. The scope of work requires machining high-grade carbon and graphite materials to exact tolerances, including surface grinding and lapping to ensure seal flatness. All components must undergo rigorous quality inspections to meet RTX and DLA critical application standards. The project falls under NAICS code 332710 and is managed by the Department of Defense. The solicitation was posted on October 16, 2026, with a response deadline of October 23, 2026. The final deliverable consists of fully machined carbon face components produced using industrial precision lapping machinery.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Aircraft Housing and Stop Assembly RepairThis subcontract involves the repair and restoration of aircraft component housings and low-pressure stop assemblies for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes surface restoration and machining utilizing precision grinding, CNC machining, and non-destructive testing to ensure the delivery of high-quality Housing and Stop Assemblies. To qualify for this project, providers must hold aerospace material certifications and NAS410 NDT certifications. The opportunity is categorized under NAICS code 332710 and is managed under the Department of Defense. Interested parties must submit their responses by November 3, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Precision Fabrication of Ceramic Ball and Titanium Housing ComponentsThis subcontract involves the precision fabrication of components for the Ceramic Ball Kit supporting NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work requires the manufacture of balls using centrifugally cast 6AL-4V titanium or ASTM-B381 Grade F-5, and seats produced from MC903 cast nylon, all in strict accordance with Naval Ship Systems Command drawings under TDP Version O08. To ensure compliance with technical specifications, the contractor must utilize precision grinding and lapping equipment and maintain Level I Quality Assurance to provide full material traceability. The final deliverables include the finished high-precision components along with all necessary certifications. The response deadline for this opportunity is November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Machined Components for Compressor UnitThis subcontract involves the precision machining and fabrication of internal components for compressor units supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work includes the production of metal housings, valves, and pistons utilizing CNC machining and precision grinding of aerospace-grade alloys in strict accordance with the Technical Data Package. The selected provider must maintain ISO 9001 or AS9100 quality management systems and provide comprehensive quality assurance records for all integrated assemblies. The final deliverables consist of machined components and sub-assemblies, with a response deadline set for November 13, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Machined Components for NRP Cherry PickerThis subcontract involves the production of precision machined components for the NRP Cherry Picker, supporting prime contractors on projects for the Navsup Weapon Systems Support under the Department of Defense. The scope of work requires the fabrication of parts using CNC milling, turning, and precision grinding, strictly adhering to TDP Version 002 and Drawing PROJECT50031L1REVF.F3GENATOM-O001. To ensure quality and compliance, the provider must maintain ISO 9001 certification and supply essential documentation, including Material Test Reports and Certificates of Conformance for all critical materials. The contract falls under NAICS code 332710, with a response deadline set for November 16, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Precision Components for Electro-Mechanical ActuatorThis subcontract involves the fabrication and supply of precision-machined internal components and raw materials for electro-mechanical actuators supporting NAVSUP Weapon Systems Support projects. The contractor is responsible for producing parts according to TDP Version No. 004, ensuring all deliverables meet rigorous Special Emphasis SUBSAFE requirements. The agreement mandates the use of domestic origin materials and the implementation of strict material control procedures. Final deliverables include the replacement parts accompanied by necessary Certificates of Compliance to verify adherence to the specified technical and quality standards.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Manufacture of Special Shaped Spacers (NSN 1HM 5365-01-419-8911)This subcontract involves the manufacture of custom-designed Special Shaped Spacers for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The contractor is responsible for fabricating parts identified as NSN 1HM 5365-01-419-8911, strictly adhering to Drawing 803-2177142, Part Number 803-2177142-5XX-74, and TDP Version No. 008. Production requires the use of precision machining equipment and mandates a strict exclusion of mercury. Compliance with DFARS 252.204-7012 is required, and the contractor must provide valid CMMC identifiers. The project falls under NAICS code 332710. The solicitation was posted on October 16, 2026, with a response deadline set for November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Hull Penetrator Precision Fabrication and AssemblyThis subcontract for the Department of Defense involves the precision fabrication and assembly of Hull Penetrator assemblies for Navsup Weapon Systems Support Mech projects. The scope of work requires machining components in strict accordance with Teledyne Drawing 1080495 and EB specification EB-4749, including the application of A-A-59004 anti-galling compound. A critical technical restriction prohibits the use of cold-forming for internal threads. The contractor is responsible for executing First Article Testing and processing all necessary data through the Wide Area Workflow system. The final deliverable consists of fully assembled and tested Hull Penetrator assemblies. This opportunity is categorized under NAICS code 332710, with a response deadline set for November 5, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Aerospace Painting and Decal ApplicationThis subcontract for Aerospace Painting and Decal Application supports prime contractors on AFSC PZABA projects at Tinker Air Force Base. The scope of work involves performing final exterior finishing on restored electronic amplifiers, which includes the application of aerospace-grade paint and the affixing of identification decals. All work must be executed in accordance with Technical Orders and OEM Specifications to ensure the delivery of fully painted and marked amplifier housings. Strict adherence to military standards is required, specifically MIL-STD-129 and MIL-STD-130 for all marking requirements. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense. Interested parties should note the response deadline of November 16, 2026.

POSTED

DEADLINE

Manifold Assembly Replacement Parts and MaterialsThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the procurement of replacement parts, seals, gaskets, and hardware necessary to restore Manifold Assembly, H to ready-for-issue condition. The selected provider will be responsible for manufacturing or sourcing flight-critical components in strict accordance with technical data package version 001. All provided materials must be of domestic origin and meet aerospace or defense grade standards. The contractor is required to deliver certified replacement parts along with the corresponding certificates of conformance. The solicitation was posted on October 16, 2026, with a response deadline of November 16, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Precision Machining and Fabrication of Thru-Hull ConnectorsThis subcontract involves the precision machining and fabrication of Thru-Hull Connectors, identified by NSN 1HM 2040-01-408-2691, for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The manufacturer is required to fabricate parts in strict accordance with TDP Version O08, CPG 1025, and QQ-N-286 standards. The scope of work includes 100% inspection for full traceability and the marking of fasteners with the appropriate Material Symbol and Designator. Adherence to Special Emphasis Level I quality controls and MIL-STD-2073 packaging standards is mandatory for the delivery of the finished connectors. The solicitation was posted on October 16, 2026, with a response deadline of November 6, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in 21 days

AI Contract Overview

NASA/NSSC is seeking to acquire ERB ShopSabre CNC Router supplies for the NASA Glenn Research Center. The agency intends to award a sole source contract to Numerically Automated Cutting Systems, LLC DBA Shop Sabre under the authority of FAR 12.102(a), as they have been identified as the sole provider of these specific supplies. This procurement falls under NAICS code 332710 and follows the provisions and procedures prescribed in FAR Part 12 for commercial items. Interested organizations may submit written capabilities and qualifications to the primary point of contact, Laura Quave, by 12:00 p.m. CST on August 30, 2026. These submissions will be used exclusively to determine if the procurement will be conducted on a competitive basis. It is explicitly noted that quotes submitted in response to this notice will not be evaluated or considered by the technical end user team.

General Info

Sole source contract for ShopSabre CNC Router supplies for NASA Glenn Research Center.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

Contract Value

$55,360.11

NAICS

332710 - Machine Shops

Place of Performance

MS, USA

Set-Aside

NONE

Awardee

NUMERICALLY AUTOMATED CUTTING SYSTEMS, LLC

Award Issued Date

09/23/2026, 12:00:00 AM UTC

Documents

ERB CNC Router Specifications

specifications

High

SATPC0042270 – Capability Statement Template / Sole Source Notice

sources-sought

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 26

special-notice

Response DeadlineAug 30

Deadline has passed

Submission Closed

08/30/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts2 people available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

laura quave

contact@example.gov

+1 (555) 000-0000

Karen Artis

contact@example.gov

Full Description

VENDORS MUST REFERENCE THE NOTICE ID IF SUBMITTING A CAPBILITY STATEMENT IN THE SUBJUECT LINE.

Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team.

Synopsis:

NASA/NSSC has a requirement for ERB ShopSabre CNC Router - Supplies

NASA/NSSC intends to issue a sole source contract to NUMERICALLY AUTOMATED CUTTING SYSTEMS, LLC DBA: SHOP SABRE 21673 Cedar AVE Lakeville, Minnesota 55044-9073 United States under the authority of FAR 12.102(a). It has been determined that NUMERICALLY AUTOMATED CUTTING SYSTEMS, LLC DBA: SHOP SABRE is the sole provider of ERB ShopSabre CNC Router - Supplies.

NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC).

The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial

The NAICS Code for this procurement is 332710.

Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 12:00 p.m. Central Standard Time on 8/30/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.

Oral communications are not acceptable in response to this notice.

NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team.

NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .

Primary Point of Contact:

Laura Quave

Procurement Specialist II

laura.a.quave@nasa.gov