Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from National Aeronautics And Space Administration was posted on August 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

ETS Lindgren for Electric Field Measurement System

Awarded
80NSSC26939613QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516
New
SLED
NDSU - Dynamic Mechanical Analyzer
Solicitation # SRC000482
North Dakota State University is soliciting bids under solicitation SRC000482 for a complete Dynamic Mechanical Analyzer (DMA) system to support polymer testing research on electrically responsive surface textures for autonomous platforms. The required system must support bending, tension, and compression modes with a temperature range of -170 to +600 degrees Celsius and a normal force sensor range of 0.001 N to 50 N. The base bid must include all necessary hardware, sensors, fixtures, first-year software licenses, delivery, installation, commissioning, training, and a one-year warranty. Optional additions may include rotational or torsional capabilities and multi-year software support. The contract will be awarded to the lowest responsive and responsible bidder who meets all mandatory technical specifications. Bidders must submit their responses through the NDBuys portal by November 4, 2026, at 2:00 PM CT, including a completed Cost Proposal Form and a Technical Compliance Form. Delivery and installation are expected at the R1A Laboratories in Fargo, North Dakota, for Fall 2026 or January 2027. The successful contractor must operate as an independent entity, maintain minimum liability insurance of 500k/2M, and adhere to non-discrimination and public records laws. All communications regarding this solicitation must be directed exclusively to the Procurement Officer, Casie Ewalt.

POSTED

about 9 hours ago

DEADLINE

in 8 days
NAICS: 334516
New
Federal
6632--FY27 Microbial Incubation ID and Susceptibility CPT
Solicitation # 36C24827Q0029
The Department of Veterans Affairs is conducting market research through a Sources Sought Notice to identify qualified vendors capable of providing a comprehensive Microbial Incubation, Identification (ID), and Antimicrobial Susceptibility Testing (AST) system for the James A. Haley Veterans Hospital in Tampa, Florida. The requirement includes the delivery and installation of two redundant analyzers—one large capacity and one medium capacity—along with incubators, middleware, and hardware and software for up to ten workstations. Technical specifications require a bi-directional, bar-coded computer interface compatible with VA laboratory systems and specific sensitivity and resolution standards for MALDI TOF systems. The scope also encompasses a continuous supply of reagents, calibrators, and consumables, which must have a minimum shelf life of six months upon delivery. Interested parties must submit a brief capability statement by November 10, 2026, including their SAM Unique Entity ID, socioeconomic status, and evidence of their ability to meet the functional requirements under NAICS code 334516. Respondents should identify available contract vehicles, such as GSA FSS or NASA SEWP, and provide estimated timelines for delivery, validation, and software implementation. The government will evaluate submissions based on technical specifications, manufacturer reputation, and the ability to provide a tiered pricing structure for cost-per-test (CPT) models. This notice is for planning purposes only and does not constitute a formal solicitation; however, it establishes strict requirements for data security, NARA-compliant data destruction, and mandatory personnel training for any future awarded contractor.
248-NETWORK Contract Office 8 (36C248)

POSTED

about 18 hours ago

DEADLINE

in 14 days

AI Contract Overview

Show more

NASA Shared Services Center is soliciting quotes for a brand-name ETS Lindgren Electric Field Measurement System to be used for radiated electric field immunity testing at the NASA John H. Glenn Research Center. This small business set-aside procurement requires one probe controller and two electric field probes meeting specific technical requirements, including a frequency response of 10 kHz to 1 GHz and a dynamic range of 2 to 800 V/m. The system must be compatible with ETS-Lindgren models HI-6022, HI-6023, and HI-6053, and the controller must support SCPI commands via GPIB, Ethernet, and USB interfaces. The contract is awarded based on the Lowest Price Technically Acceptable (LPTA) basis. To be considered, vendors must be authorized resellers and provide a Letter of Authorization, proof of manufacturer pricing, a CAGE code, and a Unique Entity Identifier (UEI). Quotes must specify ARO delivery lead times, shipping costs, and adhere to Net 30 payment terms. Delivery is FOB Destination to Cleveland, Ohio, with an estimated lead time target of September 30, 2026. Key regulatory requirements include compliance with ITAR and EAR export licenses, PIV identity verification for personnel, and specific duty-free entry notifications for foreign supplies exceeding $20,000. The estimated contract value ranges from $70,000 to $100,000. All quotes must be submitted via email to the primary point of contact, Laura Quave, by August 18, 2026.

General Info

Small business solicitation for ETS Lindgren systems; quotes due August 18, 2026.

Contract Value

$68,247.52

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

MS, USA

Set-Aside

SBA

Award Issued Date

Documents

3

NASA Sole Source/Brand Name Justification Recommendation

PDF, High priority: read this firstjustification-and-authorization
High

RFQ 80NSSC26939613Q for Electric Field Measurement System

PDF, High priority: read this firstrfq
High

Statement of Work for Electric Field Measurement System SATPC0041999

PDF, High priority: read this firstsow
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts2 people available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA
Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Full Description

Show more

See attachments for complete details for the RFQ, Statement of Work, and Redacted Brand Name Justificaton.


This is a Brand Name requirement from ETS Lindgren for ETS Lindgren Electric Field Measurement System


 This procurement is set aside for small business.


VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A QUOTE IN THE SUBJUECT LINE.



NOTE: ALL VENDORS MUST PROVIDE PROOF OF PRICING FROM THE MANUFACTURER, AND CONFIRM AUTHORIZATION TO RESELL THE ITEMS LISTED IN THE STATEMENT OF WORK.



Vendor submitting quote must be an authorized reseller and Letter of Authorization must be submitted with the quote. If not, the quote will not be reviewed and deemed unacceptable.



Please include the following in your Quote:


Net 30


FOB Destination:


Please provide your Cage Code & UEI # on your Quote.


Please provide ARO delivery time/Lead Time on your Quote.


If shipping is applicable, please provide on your Quote.



Please apply any discounts to your Quote.


We will not be paying with a Credit Card.



More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 334519
New
Federal
Transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials.
Solicitation # 80NSSC27946410Q
NASA Shared Services Center is seeking a transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials, specifically to advance the understanding of low-toxicity monopropellants. The requirement is for a Thermtest THW-L1S unit capable of measuring thermal conductivity, thermal diffusivity, and volumetric specific heat of liquids and phase change materials. Technical specifications include a temperature range of at least -50C to 200C, ASCENT compatible wetted surfaces, the ability to measure samples across a range of viscosity, and integration capabilities for an external chiller or heater unit. Performance will take place at Lab 105E in Building 4205 at the Marshall Space Flight Center, with testing scheduled to begin in the winter of 2026. This procurement is being conducted under NAICS code 334519 as a commercial item acquisition following FAR Part 12. NASA intends to issue a sole source contract to Thermtest Inc, as they have been determined to be the sole provider of the required equipment. This notice is currently a request for capability statements rather than price quotes to determine if the procurement can be conducted on a competitive basis. Interested organizations must submit their qualifications to the identified points of contact by 8:00 a.m. CST on October 30, 2026. All submissions must reference the notice ID, and oral communications are not permitted.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
Federal
Vision Technologies Installation Services KSC
Solicitation # 80NSSC26946930Q
The NASA Shared Services Center is seeking to award a sole source contract to Vision Technologies, LLC for the installation of cellular Distributed Antenna System (DAS) services at the NASA Kennedy Space Center, specifically for the K6 B2496 building. This procurement, categorized under NAICS code 541512, is intended as an 8(a) sole source acquisition under FAR 12.102(a) for commercial items and services. The scope of work involves providing materials, project management, and engineering services to establish LTE and NR cellular coverage. Vision Technologies will be responsible for designing the system to industry standards, procuring DAS materials, and installing head end and active equipment, while cabling and antenna installation will be handled by others. The contractor is required to configure, test, commission, and monitor the system to ensure proper operation with a live signal. Key deliverables include submittal drawings, antenna placement locations, testing methodology, and comprehensive close-out documentation consisting of as-built information, firmware revisions, equipment serial numbers, and warranty documentation. Final acceptance is contingent upon a verification test and validation survey once the system is operational. Interested organizations were requested to submit capability statements by October 30, 2026, to determine if the procurement should be conducted on a competitive basis.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334519
New
Federal
Yateks 3D video borescope system
Solicitation # 80NSSC27946179Q
Solicitation 80NSSC27946179Q is a firm-fixed-price contract opportunity issued by the NASA Shared Services Center for the procurement of a Yateks 3D video borescope system for the Goddard Space Flight Center. This is a brand-name requirement specifically for the Yateks Realta 3D system, which includes the iShot Imaging E Series Monitor Kit (PN: EM10418). The system was selected for its specialized capabilities, including motorized 360-degree articulation, forward-facing stereo 3D measurement, and full-HD imaging. The procurement is set aside for small businesses under NAICS code 334519, with delivery expected within one to two weeks after receipt of order. Shipping is FOB Destination to Greenbelt, Maryland. The award will be granted based on the lowest price technically acceptable (LPTA) criteria. To be eligible, responses must be submitted by authorized resellers only and must include a letter of authorization and proof of manufacturer pricing. Offerors must be registered in the System for Award Management (SAM) and include their CAGE code or Unique Entity ID on the proposal. All quotes are due by October 22, 2026, and must be submitted via email to Cody Guidry. The contract includes specific requirements for duty-free entry marking and strict compliance with U.S. export control laws, including ITAR and EAR regulations.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 14 hours
View Details
NAICS: 312111
New
Federal
NCS Customized Flex-11 Security Cabinet (CITM AUTH REQUIRED PRIOR TO AWARD)
Solicitation # 80NSSC26946481Q
Solicitation 80NSSC26946481Q is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for the procurement of two TAA-compliant NCS Customized Flex-11 Security Cabinets and associated accessories. The required hardware includes electronic keypad locks with physical overrides, eleven Corning Fiber Optic Cables, seventeen Blackbox-KVM Extender Kits over Fiber supporting dual monitors and DisplayPort 4K, and Corning Closet Connector Housing. This is a delivery-only requirement with no installation services included, and equivalent cabinets are not accepted. The place of performance is the AEGIS facility at the NASA Marshall Space Flight Center in Huntsville, Alabama, with delivery terms specified as FOB Destination. This procurement is set aside for small businesses under NAICS code 312111, and all offerors must be registered in the System for Award Management. The government will award the contract based on the lowest price technically acceptable (LPTA) criteria, provided the offeror demonstrates the ability to meet all technical requirements. The period of performance is six weeks after receipt of order. Quotes must be submitted via email to the primary point of contact by October 26, 2026. Contractors are required to comply with U.S. export control laws, including ITAR and EAR, and must adhere to specific packaging and marking requirements for duty-free entry of foreign supplies.
Soft Drink Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
Federal
Zygo Purchase
Solicitation # 80NSSC27948060Q
The NASA Shared Services Center is pursuing a sole source procurement under FAR 12.102(a) to award a contract to Zygo Corporation for the upgrade of an existing NewView 6000 series optical profiler to the NewView 9000 series. This upgrade is critical for improving metrology capabilities used to measure micrometeoroid impacts, which directly informs the architecture of the Habitable Worlds Observatory. The government has determined that Zygo Corporation is the only authorized provider capable of performing this work due to their proprietary knowledge of the control systems and the need to mitigate technical risks associated with system incompatibility. The scope of work includes the procurement of a NewView 9000 series optical head, electronics, staging, a Core Ultra i7 System Controller with 32 GB DDR5 SDRAM, a 5-axis motorized system, and various specialized lenses and turrets. Additionally, the contract covers 16 hours of on-site installation labor at the NASA Marshall Space Flight Center in Huntsville, Alabama, and requires a Certificate of Calibration utilizing ISO-17025 traceability. The estimated lead time for delivery is 8 to 10 weeks after receipt of order, with an additional 3 to 4 weeks for installation. This acquisition is conducted as a commercial item procurement under FAR Part 12 and includes the NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS