This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on May 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

EXHAUST SILENCER

Closed

N0040626Q0119Federal

Submission Closed05/22/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332919

New

SLED

Butterfly Valves & Fittings

Solicitation # 8936

The City of Waterbury is seeking sealed bids for the procurement of butterfly valves and fittings under bid number 8936. This invitation to bid is currently open, with a clarification deadline set for September 18, 2026, at 2:00 PM. All bids must be submitted to the office of the Director of Purchasing at City Hall, 235 Grand Street, Waterbury, CT 06702, by the deadline of 11:30 AM on September 29, 2026. Bids will be publicly opened and read aloud at that time, and no submissions will be accepted after the specified cutoff. For further inquiries, the primary point of contact is mmccauley@waterburyct.org.

POSTED

DEADLINE

47--REPAIR KIT,PIPE,EME

Solicitation # SPE7M3-26-T-9062

Solicitation SPE7M3-26-T-9062 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, Fluid Handling Division, for the procurement of 128 emergency damage control pipe repair kits under NSN 4730014146976. This is a total small business set-aside under NAICS 332919, with quotes due by September 21, 2026, via the DIBBS electronic system. The approved source is listed as 01CL4 BV-USA-2. Delivery is required by September 17, 2026, to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1 and MIL-STD-129. Suppliers of hazardous materials must provide Safety Data Sheets in accordance with Federal Standard No. 313-E and follow the Hazard Communication Standard for labeling. Payment will be processed electronically through the Wide Area Workflow system. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information is required. All quotes must be submitted electronically, and any use of non-domestic materials must be disclosed during the bidding process.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010426QFF42

This solicitation is for the procurement of a Straight Tailpiece (piece 73), designated as Special Emphasis material due to its critical role in shipboard systems where failure could result in serious injury or loss of the vessel. The contract requires the use of ASTM-B369 UNS C96400 material and mandates rigorous quality controls, including hydrostatic testing, dye penetrant inspection, and radiography. All internal threads must be cut rather than cold-formed, and the contractor must adhere to strict DPAS DO-rated priority and Buy American standards. The delivery process involves a phased schedule including the submission of Radiographic Shooting Sketches and Production Radiography for approval prior to final delivery, which must occur within 365 days of the contract effective date. Documentation and certifications must be submitted via Wide Area Workflow (WAWF) to Portsmouth Naval Shipyard. The contract emphasizes strict configuration control, requiring formal Engineering Change Proposals for any modifications and a comprehensive certificate of compliance for all delivered items.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-6631

This contract, solicitation number SPE7M8-26-T-6631, is issued by the Department of Defense Electrical Devices Division for the procurement of 46 pressure switches, identified by NSN 5930-01-410-9221 and Detroit Switch Inc part number 222-10NB16-2223676. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is January 11, 2027, with a delivery window of 75 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific prohibitions against the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Configuration change management and engineering change proposals are required for any variances, and the contract specifies that government identification must be removed from any non-accepted supplies.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Solicitation # N0010426QFD90

This firm fixed price solicitation is for the refurbishment of a control valve, designated as Special Emphasis SUBSAFE/Non-Level I material due to its critical role in shipboard systems. The contract requires the prime contractor to be the original equipment manufacturer and mandates that all work be performed according to specific NAVSEA approved procedures and technical data packages. Key requirements include strict adherence to quality systems such as ISO-9001, the application of unique serial numbers for traceability, and the submission of comprehensive certificates of compliance and test reports for non-destructive and hydrostatic testing. The agreement emphasizes rigorous quality assurance, requiring government source inspection and the approval of all welding and brazing procedures prior to execution. It establishes a strict configuration control process where any waivers, deviations, or engineering change proposals must be reviewed and approved by the contracting officer. All certification data and final documentation must be submitted via Wide Area Workflow for review and acceptance by the Portsmouth Naval Shipyard before any material is shipped.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

FPAIC AUGMENTATION PARTS

Solicitation # FA527026QA058

POSTED

DEADLINE

VACUUM BREAKER ASSY — 4820015535794 — SPRMM126QGF68

Solicitation # SPRMM1-26-Q-GF68

Solicitation SPRMM1-26-Q-GF68, issued on September 11, 2026, by DLA Mechanicsburg for the Department of the Navy, seeks the manufacture and procurement of a Vacuum Breaker Assembly (NSN 4820-01-553-5794). The required assembly must conform to the design represented by Cage Code 57RT4, reference number 153-003-D-063, and adhere to TDP version 002. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations based on LPTA criteria and supplier performance risk as tracked in the Supplier Performance Risk System. The contractor is responsible for all inspection and quality assurance at the point of origin, maintaining records for 365 days after final delivery. Physical identification must comply with MIL-STD-130, and packaging must adhere to MIL-STD-2073-1, with specific marking requirements per MIL-STD-129. Offerors who are not the original manufacturer must provide proof of authorized distributorship on company letterhead and provide traceability evidence for identification. Payment and invoicing shall be processed electronically through the Wide Area Workflow system. Special requirements include compliance with cybersecurity standards for safeguarding covered defense information and the provision of Material Safety Data Sheets for any hazardous materials delivered.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Supply of Pipe Cross Assemblies (NSN 4730-01-541-8067)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Hose Elbows (NSN 4730015085468)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Strip Seals (NSN 5330005881051)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Check Valves (NSN 4820016177314)

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Fluid Filter Elements (P/N ACB856F2)

MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

The U.S. Navy’s Fleet Logistics Center Puget Sound is soliciting for three critical exhaust components: an Exhaust Silencer with part number 501-C 5106-1-S-29004, an Exhaust Bellows Assembly with part number GA304717, and an Exhaust Assembly with part number GA304718. This procurement is branded exclusively to GT Exhaust Systems Incorporated, though interested parties may respond to demonstrate capability and influence the government’s decision on whether to proceed competitively. The requirement is set aside entirely for small businesses, including HUBZone, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and 8(a) program concerns, under a total small business set-aside with NAICS code 332919. Proposals must be submitted via SAM.gov and include a valid Unique Entity ID and CAGE code, with all offerors required to be registered in the System for Award Management under FAR 52.204-7. The contract is firm fixed price, and evaluation will consider technical capability, delivery date, price, and past performance without relative weighting, with expedited delivery on or before May 4, 2026, serving as a decisive evaluation factor. Although the original delivery date was May 4, 2026, a contract modification extended the firm deadline to June 30, 2026, with delivery point designated to USN SRF-JRMC Sasebo, Japan, under FOB Origin terms where the government assumes transportation responsibility after shipment from the contractor’s facility. All items must comply with MIL-STD-130 for Unique Item Identification, MIL-STD-129 for shipping marks, and ASTM-D-3951 for commercial packaging, prohibiting asbestos, excelsior, loose polystyrene, and non-treated wood. Packaging must be robust for multi-modal transport and include mandatory labeling with NSN or part number, contract number, quantity, and origin and destination details. Bar coding is not required unless specified, but any UID-marked items must use ISO/IEC 16022 compliant 2D Data Matrix symbols encoded with ISO/IEC 15434 standards. Contract administration requires invoicing exclusively through Wide Area WorkFlow, and payment will be processed upon receipt and acceptance at the destination. The contracting officer is Taura Helms, with inspection and acceptance conducted by the government

General Info

Fleet Logistics Puget Sound seeks GT brand exhaust components, small business set-aside, delivery by May 4, 2026.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget SoundView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

Sasebo, WA, JPN

Set-Aside

SBA

Documents

(3)

Amendment P0001 to Solicitation N0040626Q0119

PDF•amendment

Solicitation N0040626Q0119 for Silencer Exhaust

PDF•rfq

Amendment P0002 to Solicitation N0040626Q0119

PDF•amendment

AI Contract Breakdown

Uniform Contract Format

Timeline

2 updates

PhaseClosed

PostedApr 22

Combined Synopsis

Amendment 1Apr 29

Contract was updated

Amendment 2May 12

Contract was updated

Response DeadlineMay 22

Deadline has passed

Submission Closed

05/22/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound

Contacts2 people available

OfficeBREMERTON, WA, 98314-5100, USA

Organization / Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

View Agency Profile

Office AddressBREMERTON, WA, 98314-5100, USA

Contacts

Taura Helms

contact@example.gov

Denise Manor

contact@example.gov

Full Description

Fleet Logistics Center Puget Sound (FLCPS) intends to solicit for EXHAUST SILENCER, EXHAUST BELLOWS ASSEMBLY, AND EXHAUST ASSEMBLY. The Exhaust Silencer Part Number is 501-C 5106-1-S-29004. The part number for the Exhaust Bellows Assembly is GA304717. The part number for the Exhaust Assembly is GA304718.

BRAND NAME: This requirement is BRAND NAME to GT EXHAUST SYSTEMS INCORPORATED. Interested companies may identify their interest and capability to respond to the requirement, which will be considered solely for the purpose of determining whether to conduct a competitive procurement. The determination to compete this action based upon responses received to this notice is solely within the discretion of the Government.

The Government will evaluate the offeror’s price for reasonableness and past performance as part of the responsibility determination in accordance with RFO 12.203.

Quotes will be evaluated in accordance with RFO 12.203, the Government will select the most advantageous offer based on the following evaluation factors: technical including delivery date, price, and past performance in no order of relative importance.

NOTE: The customer is requesting expedited shipping on or before 4 May 2026. The expedited delivery will be the evaluation factor.

Anticipated Award Date: May / 2026

Contracting Officer: Taura Helms, taura.s.helms.civ@us.navy.mil