Exterior Doors, Frames & Locking Mechanisms

The contract requires the complete replacement of twenty-one exterior door assemblies on the main level of Building 635 at Fort Leavenworth, Kansas, including all associated frames, locking mechanisms, access control components, and adjacent infill systems. All work must be performed in strict compliance with the specified plans, WBDG 08 11 16 standards, manufacturer requirements, and UFC life-safety provisions. The new doors must be commercial-grade aluminum stile-and-rail units fabricated from 6063-T6 architectural aluminum extrusions, with factory-fabricated aluminum frames fully compatible with the door system. Both doors and frames must receive a factory-applied baked-on powder coating, with no field painting permitted except for minor touch-ups, and all finishes must precisely match the existing color conditions. The solicitation, identified as W91QF4-26-B-A008_B635_Doors, is a Small Business Set Aside under NAICS code 236220 and is managed by the Department of Defense through the W6QM Micc-Ft Leavenworth office. Responses are due by September 1, 2026, and performance will occur entirely at Fort Leavenworth, Kansas, with a zip code of 66027. Primary point of contact is Felipe D. Zaragoza, reachable via email and phone, with Jennifer S. Walker as the secondary contact. The work entails furnishing all labor, equipment, materials, supervision, and incidentals necessary to complete the project in accordance with stringent quality, safety, and aesthetic standards.