Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Eye Bolt Supplier (NSN 5306-00-613-9038)

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of 114 specialized eye bolts under NSN 5306-00-613-9038 to support prime contractors delivering for the Department of Defense DLA Weapons Support ASC. The supplier is responsible for manufacturing or sourcing these components, with a strict prohibition against the use of additive manufacturing. All items must be packaged according to ASTM D3951 and marked in compliance with MIL-STD-129. To ensure quality and consistency, the manufacturer must maintain inspection systems that comply with either SAE AS9003 or ISO 9001 standards. The performance location for this contract is Cherry Point, and the response deadline for the solicitation is November 16, 2026.

General Info

Procure 114 specialized eye bolts for DoD by November 16, 2026, at Cherry Point.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-3504.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOLT, EYE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized Eye Bolts for prime contractors delivering DLA supply contracts. Manufactures or sources Eye Bolts per NSN 5306-00-613-9038, prohibiting additive manufacturing. Packages items per ASTM D3951 and marks per MIL-STD-129. Requires manufacturer inspection systems compliant with SAE AS9003 or ISO 9001. Delivers 114 total Eye Bolts.

Similar Contracts

Same NAICS industry code

Plain Hexagon Nut ManufacturerThis subcontract requires the manufacture and delivery of 465 plain hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All units must be produced according to NSN 5310-01-593-9654 specifications and the DLA Master List of Technical and Quality Requirements. The contract strictly prohibits the use of additive manufacturing and mandates that materials be free of hexavalent chromium. To ensure quality control, the manufacturer must utilize inspection systems certified under ISO 9001 or SAE AS9003. The completed order of 465 nuts is to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Self-Locking Plate Nut SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 267 self-locking plate nuts identified by NSN 5310004550395. The contractor is responsible for manufacturing or sourcing these components while adhering to strict quality control sampling standards per MIL-STD-1916 or ASQ H1331. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The agreement mandates full compliance with MIL-STD-2073-1E, RP001, and MIL-STD-129 for all packaging and marking requirements. Additionally, the provider must ensure that all hazard warning labels meet 29 CFR 1910.1200 standards and provide Material Safety Data Sheets where applicable. This opportunity is designated as a Total Small Business Set-Aside.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of Critical Application Flat WashersThis subcontract, issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, requires the procurement of 59 specialized flat washers. The items must meet specific BAE Systems Land and Armaments L.P. and NSN specifications, with strict adherence to the DLA Master List technical requirements. All deliverables are classified as Critical Application Items and must comply with the Buy American Act, as well as MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place in New Cumberland. Interested parties must submit their responses by November 19, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Shear Bolt SupplyThis subcontract involves the supply of 17 specialized shear bolts for prime contractors under the Defense Logistics Agency Weapons Support ASC Commodities Division. The provider is responsible for manufacturing or sourcing these components in strict accordance with DLA technical data and the Master List of Technical and Quality Requirements, with a specific prohibition against unauthorized additive manufacturing. The contract mandates full compliance with the Buy American Act and NIST SP 800-171 security standards. Additionally, the provider must ensure supply chain traceability per DLAD #C03 and adhere to MIL-STD-129 and MIL-STD-2073-1E packaging specifications. Performance for this requirement is centered in Tracy, California.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Self-Locking Hexagon NutsThis subcontract involves the manufacture of 921 zinc-coated steel self-locking hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must strictly adhere to Basic Drawing NR 10001 2533408 Revision B and TDP Rev A Gen 1, utilizing precision machining equipment and maintaining compliance with QAP 13873. Quality assurance is a critical component of the agreement, requiring sampling and inspection conducted according to MIL-STD-1916 or ASQ H1331. All delivered units of NSN 5310-00-020-0359 must be accompanied by a Certificate of Quality Compliance. The work is to be performed in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of Self-Locking Plate Nuts (NSN 5310016696897)This subcontract involves the manufacture or procurement of 853 self-locking plate nuts, part number BACN10KE3B2CD, to support prime contractors delivering DLA supply contracts for The Boeing Company. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place at Tinker AFB. All components must adhere to FAA airworthiness standards and require FAA Airworthiness Approval. Quality assurance must be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, and the provider must ensure full supply chain traceability per RQ018. Final delivery must include the required units along with Certificates of Airworthiness and Conformance.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Socket Head Cap Screw ManufacturerThis subcontract involves the manufacture of 439 specialized socket head cap screws, part number AES14U164500BB3AB7, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The screws must be produced to specifications of 0.164-32 UNC-3A and 0.500 inches in length. Production must be carried out using precision machining, as additive manufacturing is strictly prohibited. The manufacturer must ensure strict adherence to ASME B18.24-2015 and ASME B18.3-2003 standards, with marking requirements following MIL-STD-130N. Quality assurance requires zero-based sampling per MIL-STD-1916. Final delivery consists of the 439 finished screws accompanied by a Certificate of Conformance. The place of performance is located in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Hexagon Head Cap Screw SupplierThis subcontract involves the manufacture or sourcing of Hexagon Head Cap Screws to support prime contractors delivering on DLA supply contracts. The supplier is responsible for providing 40 packages of screws delivered FOB Origin to Tracy, California, ensuring all products meet the specifications of NSN 5305-01-352-2744 and the DLA Master List. Strict adherence to quality and regulatory standards is required, including quality assurance sampling per MIL-STD-1916 or ASQ H1331 and packaging and marking according to MIL-STD-2073-1E and MIL-STD-129. Additionally, the contractor must maintain DFARS cybersecurity compliance and follow the guidelines of the Buy American Program. This opportunity is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Supplier of Plain Blind Rivet Nuts (NSN 5310-01-503-3521)This subcontract involves the supply of 364 Plain Blind Rivet Nuts meeting NSN 5310-01-503-3521 specifications for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the hardware, ensuring bare item marking follows MIL-STD-130N and packaging adheres to ASTM D3951 and RP001 standards. Quality assurance is critical, requiring zero-non-conformance verified through MIL-STD-1916 or ASQ H1331 inspections. The agreement mandates strict compliance with DFARS 252.225-7001 and DFARS 252.204-7012 regulations. Delivery of the units is set as FOB Origin to DLA Distribution, with performance based in New Cumberland. The contract falls under NAICS code 332722 and was posted by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of Plain Round Nuts (NSN 5310010295797)This subcontract involves the supply of 11 aerospace-grade plain round nuts to the Department of Defense, specifically for the DLA Weapons Support ASC Supplier Oper AE and AF Div. The required components must be manufactured or sourced according to Hamilton Sundstrand Corporation part number 727453-3 and NSN 5310010295797. Delivery is designated as FOB Origin to Tinker AFB. The contractor must adhere to strict technical and regulatory standards, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129. Quality control must be maintained in accordance with MIL-STD-1916 or ASQ H1331, and the provider is required to maintain DFARS 252.204-7012 cybersecurity compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Precision Flat Washer FabricationThis subcontract involves the precision fabrication of 82 flat washers, identified by NSN 5310-01-049-9174, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All parts must be manufactured according to drawing 19200 10554820 and adhere to ASME Y14.5M-1994 standards. The project mandates a zero-nonconformance acceptance rate in accordance with MIL-STD-105/ASQ Z1.4, and the use of additive manufacturing is strictly prohibited. The selected provider must hold an ISO 9001:2015 certification to ensure quality management standards are met. Performance will take place in Anniston, Alabama, with the final deliverable consisting of 82 finished and inspected flat washers. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Manufacture of Tapping, Thread-Cutting Screws (NSN 5305-00-052-6919)This subcontract involves the manufacture of 20 tapping, thread-cutting steel screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be fabricated according to NASM24629 Revision 3 and Part Number MS24629-52, with a strict prohibition on the use of additive manufacturing. Performance will take place at Hill AFB. The contractor is required to maintain SAE AS9003 or ISO 9001 quality systems and ensure compliance with MIL-STD-1916 or ASQ H1331 sampling standards. Final deliverables must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Military-Grade Packaging and Labeling ServicesThis subcontract opportunity is for military-grade packaging and labeling services supporting prime contractors on DLA Weapons Support ASC projects. The scope of work involves the packaging of seat covers according to ASTM D3951 standards, marking and labeling in compliance with MIL-STD-129, and palletizing shipments per RP001 DLA Packaging Requirements for Procurement. All deliverables must utilize MIL-SPEC packaging materials and compliant labeling systems to ensure items are shipment-ready. The project is a total small business set-aside under NAICS code 561910 and is managed by the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance will take place at Robins Air Force Base. Interested parties must respond by November 16, 2026.

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Manufacture of Seat Front Dress CoversThis subcontract opportunity is for the manufacture of 470 Seat Front Dress Covers to support prime contractors on DLA Weapons Support ASC projects. The selected provider will be responsible for cutting and sewing textile materials in strict accordance with NSN 1680-01-277-8953 and RA001 specifications. Quality assurance requirements include performing First Article Testing and zero-based sampling inspections per MIL-STD-1916, and the contractor must maintain compliance with either SAE AS9003 or ISO 9001 standards using industrial sewing equipment. The project is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place at Robins Air Force Base. This is a total small business set-aside under NAICS code 314910. Interested parties must submit their responses by November 16, 2026.

Textile Bag and Canvas Mills

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract involves the supply of aerospace-grade raw materials, specifically alloys and metals, for prime contractors working on DLA Weapons Support ASC aerospace projects. All materials must be sourced according to government base drawing specifications and delivered with comprehensive material test reports. The performance of this contract takes place at Robins Air Force Base. The supplier is required to provide Material Certifications and Safety Data Sheets in strict accordance with FED-STD-313 and 29 CFR 1910.1200(g). Additionally, the contractor must maintain full compliance with ITAR and EAR export controls to ensure the secure handling of sensitive aerospace materials.

Fabricated Structural Metal Manufacturing

POSTED

about 5 hours ago

DEADLINE

Precision Fabrication of Inboard Logistic RailsThis subcontract involves the precision fabrication of Inboard Logistic Rails for prime contractors supporting DLA Weapons Support ASC aerospace projects. The selected manufacturer will produce two production units and two First Article Testing units based on government base drawings, with final delivery to Robins Air Force Base in Georgia. To qualify, contractors must maintain SAE AS9003 or ISO 9001 quality systems and hold CMMC Level 2 certification. Additionally, approval from the US/Canada Joint Certification Program is required. The project falls under NAICS code 336413 and is managed by the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Machine Thread Plug SupplyThis subcontract involves the supply of 25 machine thread plugs, specifically part number H805-12-SS or an approved equivalent from CPV MFG INC, to support prime contractors under DLA Weapons Support supply contracts. The Department of Defense, through the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires all units to be packaged according to RP001 DLA Packaging Requirements and marked in compliance with MIL-STD-129. The performance of this contract will take place in Phoenix, Arizona. Interested parties must adhere to the response deadline of November 16, 2026, for this requirement categorized under NAICS code 423810.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThe Aerospace Component Finishing and Coating subcontract involves providing specialized surface treatment and coating services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes applying anodizing, passivating, or painting to bracket components in strict accordance with technical drawings and the DLA Master List of Technical and Quality Requirements. The contractor is responsible for ensuring that all finish thickness and adhesion meet rigorous military specifications before delivering the finished components. This opportunity is a total small business set-aside under NAICS code 332813, managed by the Department of Defense for the DLA Weapons Support ASC Supplier OE and AF Division. Performance will take place in Portsmouth, New Hampshire. Interested parties must respond by November 16, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, titled Aerospace Grade Raw Material Supply, involves the provision of certified raw metals and alloys for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the delivery of materials that strictly adhere to technical drawings for NSN 1450-01-657-9533, with all shipments delivered directly to the fabricator. Essential documentation must accompany the materials, including Material Test Reports, Certificates of Conformance, and Safety Data Sheets in compliance with Federal Standard No. 313. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, this opportunity is designated as a Total Small Business Set-Aside under FAR 19.5. The project falls under NAICS code 331210 and specifies Portsmouth, 03801-5000, as the place of performance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 5 hours ago

DEADLINE

Mounting Bracket Assembly ManufacturingThis subcontract opportunity is for the fabrication and assembly of two Mounting Bracket Assemblies under NSN 1450-01-657-9533 for the DLA Weapons Support ASC. The project requires precision machining and assembly according to technical drawings, with quality assurance conducted through sampling and inspection per MIL-STD-1916 or ASQ H1331. Performance will take place in Portsmouth, with the work supporting prime contractors on Department of Defense projects. The contract is designated as a Total Small Business Set-Aside under NAICS code 336413. To be eligible, contractors must maintain CMMC Level 2 and DFARS 252.204-7012 compliance. The solicitation was posted on November 8, 2026, and requires a response by November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, involves the supply of certified aerospace-grade raw material stock. The scope of work focuses on providing alloy billets or forgings specifically for the production of Linear Actuating Cylinder Heads for prime contractors. Performance for this contract is centered at Tinker AFB. A critical requirement of the agreement is strict adherence to DFARS 252.225-7001 Buy American regulations. To ensure quality and regulatory compliance, all delivered materials must include full traceability and accompanying Mill Test Reports. The opportunity is categorized under NAICS code 331210.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 5 hours ago

DEADLINE

Aerospace Finishing and Coating for Actuating HeadsThis subcontract involves providing specialized aerospace finishing and coating services for Linear Actuating Cylinder Heads to support prime contractors under the DLA Weapons Support ASC. The scope of work requires the application of aerospace-grade plating or anodizing in strict accordance with TDP specifications to ensure necessary corrosion resistance. All delivered components must adhere to ASTM D3951 packaging standards. The project is managed by the Department of Defense and will be performed at Tinker AFB. To be eligible, providers must maintain ISO 9001:2015 certification and ensure full ITAR compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 5 hours ago

DEADLINE

Precision Machining of Linear Actuating Cylinder HeadsThis subcontract involves the precision CNC machining of Linear Actuating Cylinder Heads for the Department of Defense, specifically supporting DLA Weapons Support ASC aerospace projects. The selected contractor will utilize CNC milling, turning, and boring to fabricate components according to a specific technical data package and strict aerospace tolerances. The initial requirement focuses on the delivery of two finished components for First Article Testing. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure full compliance with ITAR and EAR regulations. The work is associated with NAICS code 336413 and is designated for performance at Tinker AFB. Interested parties must respond by November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Socket Head Cap Screw Manufacturing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Canopy Hardware and Attachment Supply

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Precision Machining/Fabrication of Nut Spacer Plates

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of Grade 8 Hexagon Head Cap Screws

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Manufacture of NAS1919 Blind Rivets

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Manufacturer of Plain Extended Washer Hexagon Nuts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Hexagon Head Cap Screw Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Precision Flat Washer Manufacturing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Precision Shoulder Bolt Fabrication (NSN 5306-01-672-4375)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Manufacture and Supply of Self-Locking Plate Nuts (NSN 5310-00-734-1850)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Manufacture of Stud Assembly, Turnlock Fasteners

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of Self-Locking Hexagon Nuts with Extended Washers

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS