This Solicitation opportunity from Government of Canada was posted on June 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

EZ011-261571-VMS Signs Inspection & Maintenance – Various Locations – Alaska Highway, BC

Closed

WS5658702166International

Submission Closed06/19/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210

New

SLED

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, 3 service elevators, and 3 ramp landing elevators. These systems are critical for emergency communication and passenger safety, ensuring all elevator locations are equipped with reliable intercom capability. The work will be carried out under NAICS code 238210, which classifies it as electrical contracting, and is managed by the Aviation Project Management Group at the Port of Seattle. All installations must meet operational and safety standards aligned with airport infrastructure requirements. The project is listed as a forecast and does not yet have an active solicitation number or set aside details, indicating it is a planned procurement. Primary contact for inquiries is Angela Peterson, reachable via phone or email, with Christina Burdett serving as the project manager for coordination and technical oversight. The work will occur at the Port of Seattle’s facilities, though specific location details are not listed. Interested parties should monitor the provided portal link for future updates and official solicitation release.

Aviation Project Management Group

POSTED

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle is preparing to replace the final 125 failing Robicon variable frequency drives (VFDs) as part of Phase 3 of its VFD Replacement project, with work to be completed under a design-bid-build procurement approach. The scope includes full removal of the outdated units and installation of new VFDs, all of which must be integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking. The project requires complete wiring, rigorous testing, and formal commissioning to ensure the entire system operates reliably and meets performance specifications. All associated equipment necessary for a fully functional installation must be supplied and implemented by the contractor. The effort falls under NAICS code 238210 for electrical contracting and is being managed by the Aviation Facilities & Infrastructure division of the Port of Seattle. Primary point of contact for inquiries is Yanet Maldonado, with Sharon Miick serving as the project manager. The solicitation was posted on July 25, 2026, and while the exact location details are not specified, the work will take place at Port facilities under the jurisdiction of the Aviation Facilities & Infrastructure team. Contractors are expected to deliver a turnkey solution with full system integration and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract entails the design, permitting, and construction necessary to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance surveillance capabilities in key operational zones to support forensic investigations and enforce the Port’s movement rules and regulations. Current camera placements primarily monitor conveyor systems and security doors, but this project will expand coverage to include main terminal drive lanes and entrances in the Bagwell area, ensuring more comprehensive oversight of vehicle movements and activity. In the North Cargo area, flexible camera coverage will be implemented using Pan Tilt Zoom units that allow user-controlled adjustment to bridge gaps in surveillance coverage, providing broad surface area monitoring where needed. The project is managed by the Aviation Project Management Group under the Port of Seattle, with Angela Peterson as the primary point of contact and Randa Williams serving as the Project Manager. The work falls under NAICS code 238210, indicating it is classified as a specialty trade contractor project, and is forecasted to be posted on July 25, 2026. No set-aside provisions are specified, and the physical performance location is within the Port of Seattle’s operational boundaries. The installation effort is designed to deliver a systematic upgrade to the existing security infrastructure, focusing on resolution, coverage, and operational flexibility to better meet the Port’s evolving security and enforcement needs.

Aviation Project Management Group

POSTED

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is preparing to replace the existing aqueous film-forming foam (AFFF) fire suppression system at the Rental Car Facility located at 3150 S 160th Street in SeaTac, which contains per- and polyfluoroalkyl substances (PFAS). The project involves complete removal of the outdated foam system, including contaminated components, followed by the design and installation of a new fully dry chemical fire suppression system. This includes new storage tanks, control valves, pumps, sprinkler piping, sprinkler heads, and reserve tanks, all engineered to meet current safety and environmental standards. The new system must integrate seamlessly with the facility’s existing fire alarm controls to ensure full operational coherence and emergency response capability. The contract is being re-bid under the solicitation title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, classified under NAICS code 238210 for fire protection contracting. The effort is managed by the Port of Seattle with primary point of contact Todd Rehm and project manager Pat Nakamura available for inquiries. While no set-aside status or detailed budget is specified, the work is anticipated to proceed after the posting date of July 25, 2026, with performance expected at the RCF location. The project underscores the Port’s commitment to environmental compliance by eliminating PFAS-containing systems and transitioning to safer, non-contaminating fire suppression technology.

Aviation Project Management Group

POSTED

DEADLINE

Parking Garage UPSThe contract involves the demonstration and replacement of the existing uninterruptible power supply (UPS) system serving the parking garage’s ticketing kiosks and associated access gates. The project requires the installation of new UPS equipment along with associated electrical infrastructure, including subpanels, electrical feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature data connectivity for real-time alarm monitoring, enhancing system reliability and maintenance responsiveness. The work is being procured by the Port of Seattle through its Aviation Project Management Group, with performance taking place at the parking garage location under their jurisdiction. The solicitation is posted as a forecast with a NAICS code of 238210, indicating it falls under electrical contracting services. Primary point of contact for inquiries is Yanet Maldonado, with JJ Jordan serving as the project manager.

Aviation Project Management Group

POSTED

DEADLINE

Electrical Unit Price Portwide 2026The contract titled Electrical Unit Price Portwide 2026 encompasses a broad scope of electrical work to be performed across multiple Port of Seattle facilities, including Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. Tasks include the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, and all associated equipment, testing, and grounding activities, all carried out in full compliance with applicable code-enforcing agency requirements. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidental items necessary to execute each task as directed through a Work Authorization issued by the Port of Seattle. Labor must be supplied according to the specific classifications listed in the Schedule of Unit Prices, ensuring standardized compensation and role definitions. The work is forecasted for performance in 2026 and is managed under NAICS code 238210, with primary oversight provided by the Port Construction Services division. Heather Bowden serves as the primary point of contact for inquiries, while Lesley Miles acts as the Project Manager. All communications and documentation related to this solicitation are accessible through the Port of Seattle’s official online portal.

Port Construction Services

POSTED

DEADLINE

Electrical Systems and Power DistributionThis contract is a small business set-aside for the installation of comprehensive electrical systems and power distribution infrastructure, including power distribution systems, emergency generators, lighting, variable frequency drives, and supporting electrical components. The work is to be performed in Portland, Oregon, with a performance location zip code of 97204, and is classified under NAICS code 238210, which corresponds to electrical contracting. The opportunity is designated as a Total Small Business Set-Aside under SBA regulations, meaning only small businesses are eligible to bid, ensuring participation from qualified small business contractors. The solicitation was posted on July 25, 2026, with a firm deadline for responses on August 5, 2026, at 10:00 PM Eastern time. The contracting organization is the Department of Defense through its W071 Endist Portland office, indicating this effort supports defense-related infrastructure needs. All bid submissions must comply with federal acquisition requirements, and the contract award will be made to a capable small business that can deliver the full scope of electrical work in accordance with technical and regulatory standards.

POSTED

DEADLINE

Emergency Generator SetupThe contract titled Emergency Generator Setup is a subcontract under a Service-Disabled Veteran-Owned Small Business Set Aside, designated for the installation of a backup emergency generator to ensure uninterrupted operation of boiler and control systems during power outages. The work is to be performed in Dublin, Georgia, with a ZIP code of 31021, and falls under the NAICS code 238210 for electrical contractors and other wiring installation contractors. This initiative is managed by the Department of Veterans Affairs through its 247-NETWORK Contract Office 7, emphasizing support for veteran-owned businesses while safeguarding critical infrastructure essential for facility functionality and safety. The solicitation was posted on July 25, 2026, and while no point of contact or specific agency address details are provided, the contract is accessible via the SAM.gov platform for further information.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Lighting ServicesTexas State University is seeking qualified contractors to provide comprehensive lighting services for its UEC, baseball, and softball facilities through a competitive request for proposals. The solicitation, identified as 754-TXST-2026-RFP-504-ATH, was posted on July 24, 2026, with responses due by 6:00 PM on August 10, 2026. Proposals must be submitted by responsible individuals or firms capable of delivering lighting solutions that meet the university’s operational and safety standards for outdoor athletic venues. The project falls under the jurisdiction of the Texas State University agency, with all performance activities to be conducted on campus in Texas. Dan Alden is the designated point of contact for inquiries and can be reached via phone at 512-245-2521 or email at danalden@txstate.edu. All submissions must comply with the requirements outlined in the solicitation, which emphasizes responsiveness, technical competence, and responsible contracting practices.

Texas State University

POSTED

DEADLINE

The Supply and Installation of Structured Cabling and Network Infrastructure for the Relocation of the Regional Office 26/27- ICT-0050The contract pertains to the supply and installation of structured cabling and network infrastructure required for the relocation of the Western Regional Health Authority’s Regional Office in Jamaica. It encompasses all necessary telecommunications and data cabling systems, networking hardware, termination points, pathway installations, and associated components to support modern office communication and IT operations at the new location. Work must comply with industry standards for performance, reliability, and scalability, ensuring seamless integration with existing and future technology systems. The solicitation number is 1317/9378, with a response deadline of August 5, 2026, and the opportunity was posted on July 24, 2026. The contracting entity is the Government of Jamaica through the Western Regional Health Authority, and no specific set-aside or NAICS code is indicated. Proposals must be submitted through the official government e-procurement portal, with no physical address or point of contact provided in the posting. Performance of the work is expected to occur at the designated regional office relocation site, though exact location details are not specified in the available information.

Western Regional Health Authority

POSTED

DEADLINE

Electrical Installation and Field WiringThe contract titled Electrical Installation and Field Wiring pertains to on-site electrical work requiring the installation of power and data cabling, connection of field sensors, and energization of SCADA control panels, all executed in full compliance with applicable electrical codes. The work is to be performed at an unspecified location within the jurisdiction of the City of Denton, Texas, and must meet technical and safety standards expected for critical infrastructure systems. This subcontract opportunity is open for bids with a response deadline of August 26, 2026, and is classified under NAICS code 238210, which designates electrical contracting services. The solicitation is posted on the City of Denton’s public procurement portal, though no specific point of contact or set-aside provisions are detailed in the provided information.

POSTED

DEADLINE

Electrical Installation and Wiring ServicesThe contract outlines the installation of electrical systems for commercial or industrial facilities in San Diego, covering power distribution, lighting, and control wiring. It is structured as a subcontract under NAICS code 238210, which corresponds to electrical contracting services, and is issued by San Diego County in California. The solicitation was posted on July 24, 2026, with a response deadline of August 1, 2026, at 1:00 AM, indicating a narrow window for submission. Performance of the work is required within San Diego, though specific location details and point of contact information are not provided. The contract does not specify a set-aside type or organization type, and no agency office address or zip code is listed in the documentation. Interested parties must access the full solicitation through the provided online portal to complete an application or proposal.

San Diego County

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

Public Works and Government Services Canada is seeking a qualified electrician to deliver comprehensive inspection, maintenance, and urgent response services for variable message signs along the Alaska Highway in British Columbia. The contractor must supply all required tools, equipment, materials, transportation, labor, and supervision to ensure the proper functioning of VMS signs at four designated locations. Services include routine inspections, testing, repairs, and maintenance to meet operational standards, and the electrician must hold certifications equivalent to or higher than the class required by provincial regulations to legally perform such work. The contractor is required to provide a 24/7/365 urgent callout service to address failures or malfunctions of the signs at any time, ensuring continuous reliability of critical communication infrastructure. All work must be performed in accordance with applicable safety and technical standards, and the contractor must be fully prepared to respond rapidly to incidents regardless of weather or remote conditions. The solicitation, identified as WS5658702166 under NAICS code 238210, was posted on June 19, 2026, with a response deadline of the same day at 2:00 PM Eastern Time. Point of contact for inquiries is Brandie Klyne of Public Services and Procurement Canada.

General Info

Electrician needed for VMS inspection, maintenance, repairs along Alaska Highway, BC; five-month contract.

Agency

Government of Canada → Department of Public Works and Government ServicesView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

*British Columbia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 29

Solicitation

Response DeadlineJun 19

Deadline has passed

Submission Closed

06/19/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of Public Works and Government Services

View Agency Profile

Office AddressN/A

Contacts

Klyne Brandie (SPAC/PSPCPoint of Contact

contact@example.gov

Full Description

Public Works and Government Services Canada (PWGSC) has a requirement for a qualified electrician to provide inspection, maintenance and urgent services for VMS signs along the Alaska Highway. The Contractor shall provide all necessary tools, labour, supervision, materials, equipment and transportation to provide for the inspection, maintenance servicing, repairs and testing of all VMS signs at the 4 locations along the highway. Qualified electricians must be certified to the level or class required to perform the inspection, testing and repairs of the equipment. Contractor must also provide an urgent call out service 24 hours per day 7 days per week.