This Government Contract opportunity from Department Of Defense was posted on January 9, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

F100 1st, 2nd, and 3rd Stage PWA 46 Coating

Awarded

FA813220R0002Federal

Submission Closed01/08/2021, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412

New

Federal

TURBO SUPERCHARGER / NSN 2950-01-714-4392 / JOINT LIGHT TACTICAL VEHICLE

Solicitation # SPE4A727R0102

POSTED

DEADLINE

Solicitation # SPRPA127QXA54

Solicitation SPRPA1-27-Q-XA54 is a fixed-price request for the procurement of 91 units of Shroud Segment, Turb (NSN 2840-01-700-3955), designated as a critical application item. The requirement is managed by the Department of Defense through the DLA Aviation office in Philadelphia, with Sean Geiger serving as the primary point of contact. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Technical acceptability requires compliance with ISO 9001 or a higher quality management system. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073 and MIL-STD-129, with inspection and acceptance occurring at the origin. Shipping is FOB Destination, and all payment processing must be conducted through the Wide Area WorkFlow (WAWF) system using combined invoice and receiving reports. Key regulatory requirements include the Buy American and Balance of Payments Program, the safeguarding of covered defense information per DFARS 252.204-7012, and a one-year warranty for non-complex supplies. Offerors must be registered in the System for Award Management and provide detailed pricing and commercial status documentation with their proposals.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # N0038327QTA11

Solicitation N0038327QTA11, issued on October 8, 2026, by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the procurement of a Gasoline Engine Guard, identified by NSN 2810-01-737-5535. The government intends to make a single award to a responsible offeror based on a best-value determination where past performance is considered more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings, while price serves as a secondary factor. Quotations are due by November 9, 2026, and the required delivery period is 90 days FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipments. Contractors must comply with cybersecurity standards outlined in NIST SP 800-171 and DFARS 252.204-7012. Quality management compliance with ISO 9001 or SAE AS9100 is required, and inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment, and compliance with the Buy American and Balance of Payments Program. Offerors must also provide hazardous material certifications and safety data sheets if applicable.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # SPRMM127QMA08

Solicitation SPRMM127QMA08, issued by the DLA Weapons Support Mechanicsburg and NAVSUP Weapon System Support, seeks the manufacture and delivery of one Turbosupercharger, E (NIIN 013298504). The award will be granted to the responsible offeror providing the lowest price technically acceptable offer, evaluated based on technical compliance, price, and supplier risk via the Supplier Performance Risk System. Offerors must provide a 60-day quote validity and identify the Original Equipment Manufacturer if they are a distributor. The item must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073-1 or ASTM D3951-18 depending on the destination. The contract requires electronic submittal of invoices and receiving reports through PIEE-WAWF. Inspection and final acceptance will occur at the origin, specifically at the contractor or subcontractor plant. Key regulatory requirements include compliance with the Buy American Act, cybersecurity maturity model certification, and ISPM 15 for wood packaging. Any changes in design or part numbers require government approval and supporting documentation. The item is destined for the USNS SUPPLY T AOE 6, and all contractual communications and documents are handled electronically via email, facsimile, or the PIEE-EDA web tool.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPRPA127QXA28

Solicitation SPRPA1-27-Q-XA28 is a fixed-price request for the procurement of three aircraft turbine frames, identified by NSN 0RH 2840-01-699-6916. Issued by the Department of Defense through the Pa DLA Aviation office in Philadelphia, the requirement is designated as a critical application item and is issued under EAF authority. The delivery timeline is set for 90 days with FOB Destination terms. Inspection and acceptance will occur at the origin, and the contractor must adhere to ISO 9001 or higher quality management standards. The government intends to make a single award based on a best-value determination where past performance is considered more important than price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for Item Unique Identification (IUID) and hazardous materials compliance. Payment and invoicing are to be processed electronically via the Wide Area Workflow (WAWF) system. The solicitation also includes strict adherence to Buy American policies and various security prohibitions, including those related to Chinese military companies.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Aircraft Valve (NSN 2840-01-666-6866)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Combustion Liners (NSN 2840-01-709-1523)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Vane Assembly, Compressor (NSN 2840-01-714-0446)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Turbine Engine Blade Supplier (NSN 2835-01-4575652)

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

VALVE — 2840016666866 — SPRPA127QXA60

Solicitation # SPRPA127QXA60

Solicitation SPRPA127QXA60, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks the procurement of 35 units of a valve (NSN 2840-01-666-6866). This item is designated as a Critical Safety Item (CSI), requiring strict adherence to quality standards, including ISO9001 compliance. The delivery is required within 90 days, with inspection and acceptance occurring at the origin. The procurement is governed by NAICS code 336412 and follows FOB Destination terms. The award process prioritizes past performance over price, utilizing the DoD Supplier Performance Risk System (SPRS) for color-coded ratings. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for domestic and overseas shipments and the use of approved pallets and barrier materials. The contract incorporates several key FAR and DFARS clauses, including those for hazardous material identification, the Buy American Program, and cybersecurity safeguarding of defense information. Quotations must be submitted by November 16, 2026, and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

NOZZLE ASSEMBLY,TUR — 2840017143231 — SPRPA127QXA59

Solicitation # SPRPA127QXA59

Solicitation SPRPA127QXA59, issued by the Department of the Navy via DLA Aviation at Philadelphia, is a request for the procurement of 72 units of Nozzle Assembly, TUR (NSN 2840-01-714-3231). This item is designated as a Critical Safety Item (CSI), requiring strict adherence to ISO 9001 and SAE AS9100 quality management standards. The government intends to make a single award based on a best-value determination, prioritizing past performance as the primary evaluation factor over price. Offerors must provide relevant past performance history or a statement of no history to remain eligible for award. The contract mandates rigorous packaging and marking standards, including compliance with MIL-STD-2073 for preservation and MIL-STD-129 for marking. Specific requirements include Item Unique Identification (IUID) per MIL-STD-130 and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Inspection and acceptance will occur at the origin. Key regulatory clauses are incorporated, including the Buy American Act, Trade Agreements, and safeguarding of covered defense information. No drawings are available for this solicitation, and the procurement is not set aside for small businesses.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

VANE ASSEMBLY,COMPR — 2840017140446 — SPRPA127QXA56

Solicitation # SPRPA127QXA56

This solicitation, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks a single award for the supply of 117 units of Vane Assembly, Compr (NSN 2840-01-714-0446). The procurement is conducted under Emergency Acquisition Flexibilities authority and designates the items as Critical Safety Items, requiring compliance with ISO9001 quality standards. Delivery is required within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin. The award will be based on the most advantageous offer, with past performance weighted as more important than price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System, and offerors without a relevant history will receive a neutral rating. Packaging must adhere to MIL-STD-2073 and MIL-STD-129, with specific requirements for DLR labeling and hazardous material identification. Invoicing and payment are processed electronically through the Wide Area WorkFlow system. The solicitation is categorized under NAICS code 336412 and incorporates various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and priority ratings for national defense.

Pa DLA Aviation At Philadelphia

POSTED

about 12 hours ago

DEADLINE

in 18 days

AI Contract Overview

Solicitation FA813220R0002 is an award notice for a Department of Defense contract managed by the AFSC PZIMC at Tinker Air Force Base. The contract involves non-personal services for the application of proprietary PWA-46 Tungsten Carbide Coating to the mid-span of 1st, 2nd, and 3rd stage compressor inlet fan rotor blades for F100-PW-100-200/220/220E engines. This effort is designated as a Women-Owned Small Business set-aside and is executed as a firm fixed price agreement. Performance takes place in Kansas City, Missouri, and requires the contractor to provide all necessary labor, equipment, and quality control measures in accordance with USAF Technical Orders and ISO/ANSI/ASQC Q9001 standards. The contractor is required to deliver completed parts within 30 calendar days following authorization to proceed, adhering to specified monthly delivery limits. A critical deliverable is the submission of a Certificate of Conformance for each repaired part to certify quality control and compliance with all applicable technical data. Additionally, the contractor must comply with Department of Labor Wage Determination No. 2015-5105 Revision 10, ensuring minimum hourly wages and fringe benefits for personnel in the Kansas and Missouri regions. All work must be performed in strict accordance with the Performance Work Statement and government quality management systems.

General Info

Agency

Department Of Defense → FA8132 Afsc Pzimc

Contract Value

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

Kansas City, MO, 64116, USA

Set-Aside

NONE

Awardee

PAS TECHNOLOGIES INC

Award Issued Date

01/08/2021, 12:00:00 AM UTC

Documents

Contract Data Requirements List for F100 Inlet Blades - FD2030-19-34344

cdrl

High

F100 M2M Final Performance Work Statement 26 Sep 2019

pws

High

Solicitation FA813220R0002 for PWA-46 Application Services

rfp

High

Wage Determination No. 2015-5105 Revision 10

wage-determination

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

4 updates

PhaseAwarded

PostedAug 6

Presolicitation

Notice updatedAug 28

Response deadline changed from Aug 24, 2020 to Sep 11, 2020. The notice description changed.

Deadline changedSep 10

Response deadline changed from Sep 11, 2020 to Sep 25, 2020.

Deadline changedSep 25

Response deadline changed from Sep 25, 2020 to Oct 2, 2020.

Justification (J&A)Jan 21

Justification & Approval published

AwardedJan 8

Contract was awarded

Submission Closed

01/08/2021, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA8132 Afsc Pzimc

Contacts2 people available

OfficeTINKER AFB, OK, 73145-3303, USA

Organization / AgencyDepartment Of Defense → FA8132 Afsc Pzimc

Office AddressTINKER AFB, OK, 73145-3303, USA

Contacts

David W. Herrig

Michael Shand

Full Description

The Maintenance Contracting Branch (AFSC/PZIMC) at Tinker AFB, OK, intends to award a Fixed Price Requirements Contract to PAS Technologies of Kansas City (CAGE 4GMJ6) on a sole source basis using the authority at FAR 6.302-1, Only one responsible source and no other supplies or services will satisfy agency requirements. This will be a service acquisition for the application of coatings to F100 1st, 2nd and 3rd Stage Fan Blades IAW Pratt & Whitney PWA 46 process. Anticipated award date is 30 Sep 20.