Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Fabrication and Supply of Vehicular Operation Panels

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and supply of three finished vehicular operation panels for prime contractors supporting DLA Weapons Support. The panels must be manufactured according to NSN 2510-01-566-9715 and P/N 4299978, ensuring full adherence to the DLA Master List of Technical and Quality Requirements RA001. All items must be packaged in accordance with ASTM D3951 and MIL-STD-129 standards and delivered to DLA Distribution DDSP New Cumberland. The contractor is required to maintain strict compliance with the Buy American Act and the Berry Amendment. This procurement falls under NAICS code 332999 and is managed by the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. Responses to the solicitation are due by October 19, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-27-T-0133.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PANEL, VEHICULAR OPERAT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies finished vehicular operation panels for prime contractors delivering DLA Weapons Support contracts. Fabricates panels per NSN 2510-01-566-9715 and P/N 4299978, adhering to the DLA Master List of Technical and Quality Requirements (RA001). Packages items per ASTM D3951 and MIL-STD-129. Must comply with Buy American Act and Berry Amendment. Delivers three completed, labeled panels to DLA Distribution DDSP New Cumberland.

Similar Contracts

Same NAICS industry code

Manufacture of Repair Module, StraiThis subcontract involves the manufacture of Repair Module, Strai (NIIN 016145046) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The contractor is responsible for fabricating modules according to TDP Version O03, Cage Code IQZK3, and reference number 030KDH-S0401211, while ensuring all physical identification and marking adhere to MIL-STD-130, REV N. Execution of this contract requires the use of precision metal fabrication equipment and strict adherence to DFARS 252.204-7012 cybersecurity compliance standards. The project falls under NAICS code 332999, with a response deadline set for October 15, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

Supply of Welding Rods (NSN 1HM 3439-01-553-1625)This subcontract involves the supply of specialized welding rods for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The contractor is responsible for manufacturing or sourcing rods that strictly adhere to NSN 1HM 3439-01-553-1625 and Individual Repair Part Ordering Data specifications. Deliverables include the physical welding rods accompanied by a comprehensive procedure package. Strict compliance with military standards is required for all logistics and quality control. Packaging must meet MIL-STD-2073 and MIL-W-10430 requirements, with marking performed according to MIL-STD-129. Additionally, the contractor must implement IUID reporting through the Wide Area Workflow system. The opportunity was posted on October 8, 2026, with a response deadline of November 9, 2026, falling under NAICS code 332999.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month

CATCH BASIN TOP 41"X70"X5"COG STANDARD #412

Solicitation # 12536

The City of Greensboro in North Carolina has issued solicitation number 12536 to secure a firm, delivered price for Catch Basin Tops measuring 41 by 70 by 5 inches, COG Standard 412. This local government procurement event was posted on October 7, 2026, with a response deadline of October 9, 2026. Suppliers are encouraged to submit their bids through the GePS website at least 24 hours before the closing time to avoid potential service interruptions. The contract will be awarded based on the lowest responsible and responsive bid, with price serving as the primary evaluation factor. A local preference policy is in effect, allowing eligible local bidders the opportunity to match the lowest non-eligible bid to secure the award. For qualitative or price competitive service contracts, eligible local bidders may receive an additional five percent of the evaluation points.

City of Greensboro

POSTED

about 22 hours ago

DEADLINE

Stainless Steel Specialist SupplierThe Stainless Steel Specialist Supplier subcontract involves the provision of high-grade Grade 304 stainless steel components for prime contractors working on OC Public Works projects in California. The scope of work requires the delivery of new, defect-free stainless steel stock, specifically round bars, strips, and angles in 2x2 and 3x3 dimensions, all of which must strictly adhere to 304 Stainless Steel specifications. This opportunity was posted on October 7, 2026, with a response deadline of November 4, 2026. Classified under NAICS code 332999, the contract focuses on the specialized supply and delivery of these materials to support public infrastructure projects managed by the agency.

OC Public Works

POSTED

DEADLINE

Supply of Electronic Component Shields (P/N 122164A)This subcontract involves the supply of 22 warranted electronic component shields for the Department of Defense, specifically supporting the DLA Weapons Support Active Devices Division. The contractor is responsible for manufacturing or procuring shields that strictly adhere to Shield Technologies Corp P/N 122164A and NSN 5999-01-628-3494 specifications. All items must undergo physical identification and bare item marking in accordance with RQ017 standards, and the use of additive manufacturing processes is explicitly prohibited. The completed units are to be delivered to DLA Distribution New Cumberland. This requirement falls under NAICS code 332999, with a response deadline set for October 19, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Specialized Alloy/Metal Stock SupplyThis subcontract involves the supply of certified raw metal stock, including bars, tubes, and billets, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the specifications outlined in Reference Drawing NR 81755 16S143. To ensure full compliance with the Technical Data Package and the Buy American Act, the supplier is required to provide Mill Test Reports with all deliveries. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the work is associated with NAICS code 332999. The place of performance is located at Hill AFB, zip code 84056-5734. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Vehicular Door Check Rod SupplierThis subcontract involves the manufacture or sourcing of five vehicular door check rods, specifically Part Number 106A0351-1, for prime contractors supporting DLA Weapons Support Land projects. The supplier must ensure all components meet the specifications outlined in the DLA Master List of Technical and Quality Requirements and strictly adhere to environmental restrictions prohibiting the use of hexavalent chromium and Class I ozone-depleting chemicals. The agreement requires compliance with ASTM D3951 and MIL-STD-129 packaging standards, with final delivery of the rods to DLA Distribution San Joaquin on an FOB Origin basis. This procurement is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations for Vehicle Support, with performance centered in Tracy, California.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Guided Cover Fabrication (NSN 5340016875745)This subcontract involves the fabrication of eight Guided Covers for prime contractors supporting the DLA Weapons Support Land Supply Chain. The manufacturer is required to produce the covers according to Shield Technologies Corp part number 123025-GN, ensuring the application of a specified green finish. All work must strictly adhere to the DLA Master List technical and quality requirements under RA001 and maintain full compliance with the Buy American Act. The project is categorized under NAICS code 332999 and will be performed in New Cumberland. To be eligible, the contractor must complete a CMMC Level 2 self-assessment. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Filler Opening Cap (P/N CD-297)This subcontract involves the supply of Filler Opening Caps, specifically part number CD-297 and NSN 2590-01-646-1138, to support prime contractors for the Department of Defense under the DLA Weapons Support Land Supply Chain. The selected provider must ensure that no Class I Ozone Depleting Chemicals are utilized during production and must adhere to strict packaging and marking standards according to ASTM D3951, RP001, and MIL-STD-129. The completed components are to be delivered to the ASD Jacksonville Supply Department. This opportunity falls under NAICS code 332999 and was posted on October 7, 2026, with a response deadline of October 14, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacturing of Oxygen System Filters (NSN 1660-01-493-1834)This subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the manufacture of 198,000 high-precision oxygen system filters identified as NSN 1660-01-493-1834. The contractor is required to fabricate these filters according to Part Number 1653300-1 and the DLA Master List of Technical and Quality Requirements, utilizing non-reactive materials specifically compatible with high-purity oxygen. Due to the nature of these components as Critical Safety Items, the provider must maintain AS9100 certification and obtain approval from government design control activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999, with a response deadline of October 13, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Fabrication and Supply of Waste Oil Storage Tank (NSN 5430-01-384-8132)This subcontract involves the fabrication and supply of one waste oil storage tank for prime contractors supporting Department of Defense DLA supply contracts. The manufacturer is responsible for constructing the tank structure according to RA001 technical and quality requirements, applying appropriate waste oil coatings, and integrating all necessary fittings and valves in accordance with NSN 5430-01-384-8132. The project requires strict adherence to MIL-STD-130N and the provision of safety data sheets as mandated by 29 CFR 1910.1200. The final deliverable is a completed and inspected storage tank. This opportunity is listed under NAICS code 332999 with a response deadline of October 19, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Supply of Protective Dust and Moisture Seal Cap SetsThis subcontract involves the manufacture and supply of 16 protective dust and moisture seal cap sets for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for sourcing or producing parts in strict accordance with TDP Rev A Gen 1 and part number 040489-168-1. Operational requirements include performing quality control per RA001 and adhering to packaging standards RP001 and ASTM D3951. All packaging must be marked and labeled according to MIL-STD-129. The work is associated with NAICS code 332999 and will be performed in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

Seal Assembly Manufacturing and SupplyThis subcontract involves the manufacture and supply of 11 completed seal assemblies for prime contractors supporting DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for sourcing or producing parts that strictly adhere to BAE Systems P/N LD419923-0003 and NSN 1440-00-863-8207 specifications. Quality assurance and logistics must comply with MIL-STD-1916 for sampling and MIL-STD-2073-1E for packaging. The performance of this contract takes place in New Cumberland, Pennsylvania. Due to the nature of the work, the provider must be capable of handling Covered Defense Information and must complete a CMMC Level 2 self-assessment. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Helical Gears (NSN 3020000805865)This subcontract involves the manufacture and supply of seven precision steel helical gears under NSN 3020000805865 for the DLA Weapons Support LSO Combat Vehicles and Armament. The gears are specifically designed for Stewart and Stevenson Model 16-114D001 Diesel Engines and must be machined with 68 teeth, a 0.76070 diametral pitch, and a 20-degree pressure angle. The project requires strict adherence to ANSI/NCSL Z540-1-1994 calibration standards and MIL-STD-130 marking requirements. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline set for October 19, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for processing 2,000 units using military-specification materials and labeling equipment, ensuring all items are packaged according to ASTM D3951 and marked in compliance with MIL-STD-129. The scope of work includes preparing all shipments for FOB Origin delivery to DLA Distribution in New Cumberland, Pennsylvania. This requirement falls under NAICS code 488510, with a response deadline set for October 19, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacture of Clamp Wrenches (NSN 1005131183547)This subcontract involves the manufacture of 2,000 specialized clamp wrenches, part number 3530560030, for the DLA Weapons Support LSO Combat Vehicles and Armament. The project requires the use of precision machining equipment to produce the units, with a strict prohibition against the use of additive manufacturing. All production must align with the DLA Master List of Technical and Quality Requirements to ensure strict adherence to military specifications. The contract mandates full compliance with domestic sourcing regulations, specifically the Berry Amendment and the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must have responded by the deadline of October 19, 2026, to fulfill the delivery of the finished hardware under NAICS code 333310.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Supply of Electrical Leads (NSN 5995-01-723-4418)This subcontract involves the supply of six specialized electrical leads under NSN 5995-01-723-4418 for the DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for manufacturing or sourcing the leads to meet General Dynamics Land Systems Inc. part number RS2244277 specifications. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 335999. Strict quality and logistics standards are required for this engagement. The contractor must perform quality sampling in accordance with MIL-STD-1916 or ASQ H1331, while packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Industrial Coating and Surface TreatmentThis subcontract for Industrial Coating and Surface Treatment supports prime contractors on DLA Weapons Support projects under the Department of Defense. The scope of work involves applying industrial plating or paint to sprocket wheels to deliver corrosion-resistant components. All surface treatments must be performed without the use of Class I ozone-depleting chemicals and must strictly adhere to MIL-STD-2073-1E packaging and preservation standards. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties should note the posting date of October 7, 2026, with a response deadline set for October 19, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

High-Strength Alloy Steel SupplyThis subcontract, titled High-Strength Alloy Steel Supply, involves the provision of certified raw alloy steel billets or forgings to prime contractors supporting DLA Weapons Support projects. The primary objective is the delivery of certified raw material stock specifically intended for the production of sprocket wheels. All supplied materials must strictly comply with the Buy American Act and be guaranteed free of mercury and Class I ozone-depleting chemicals. To ensure quality and compliance, the supplier is required to provide Material Test Reports that verify the metallurgical properties of the steel. The contract is associated with NAICS code 331110 and is managed under the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located in New Cumberland.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Sprocket Wheel ManufacturingThis subcontract involves the precision machining and fabrication of two sprocket wheels for prime contractors supporting DLA Weapons Support. The project requires parts to be manufactured to NSN 3020013029249 specifications as Critical Application Items, utilizing CNC machining and grinding in accordance with RA001 technical requirements. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331 standards. The contract is issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament agency, with performance taking place in New Cumberland. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026. The work falls under NAICS code 333612.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

Supply of Vehicle Window Regulators (NSN 2540016738142)This subcontract involves the procurement or manufacture of 2,000 passenger-side vehicle window regulators for prime contractors supporting the Department of Defense DLA Weapons Support LSO Combat Vehicles and Armament. The required units must match Deere and Company part number AM146830 and NSN 2540016738142. All deliverables must be shipped FOB Origin and strictly adhere to additive manufacturing prohibitions. Compliance requirements include packaging according to ASTM D3951 and RP001 standards, with labeling performed per MIL-STD-129. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336390. Interested parties must have responded by the deadline of October 19, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Supply of NAS1251 Ring Bolt / Drawbar CouplerThis subcontract involves the procurement of one Ring Bolt Drawbar Coupler for the Department of Defense, specifically supporting DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for manufacturing or sourcing the bolt in accordance with National Aerospace Standard 80205 P/N NAS1251 and must adhere to DLA quality requirements RA001, RP001, and RQ011. The final product, identified by NSN 5306016509044, is to be delivered to Boise, Idaho. Strict production and logistics standards apply to this agreement, including a prohibition on the use of Class I Ozone Depleting Chemicals during manufacturing. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 specifications. The opportunity is categorized under NAICS code 332722, with a response deadline set for October 19, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Weapons Support projects under the Department of Defense. The scope of work involves performing military-grade packaging, marking, and palletization in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Specific preservation requirements include the application of QWP:.001, PRES MTHD:.20, CLNG/DRY:.1, and WRAP MAT:.GB using industrial marking equipment and MIL-SPEC materials to ensure shipments are ready for FOB Origin pickup. The project is managed by the DLA Weapons Support LSO Combat Vehicles and Armament and will be performed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 19, 2026. The contract is categorized under NAICS code 488510, focusing on the delivery of fully compliant, packaged shipments that meet rigorous military specifications.

Freight Transportation Arrangement

POSTED

DEADLINE

Spur Gear Supply (NSN 3020-01-596-0315)This subcontract involves the supply of precision-manufactured spur gears for prime contractors supporting DLA Weapons Support projects. The scope of work requires the manufacture or sourcing of gears identified as NSN 3020-01-596-0315 and Cummins part number 119803-21200, ensuring all items adhere to the DLA Master List of Technical and Quality Requirements RA001. The contractor must possess specialized precision gear cutting and grinding machinery and maintain NIST SP 800-171 compliance. The agreement specifies the delivery of two spur gears FOB Origin to DLA Distribution DDSP New Cumberland. This procurement is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, falling under NAICS code 333612. The response deadline for this opportunity is October 19, 2026.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS