This Solicitation opportunity from Government of Canada was posted on June 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

FABRICATION DE CONTENEURS EN ACIER

Closed

20148157International

Submission Closed06/15/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312

New

ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)

Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf

Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.

POSTED

DEADLINE

Solicitation # SPE7M0-27-T-0724

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

SCREW, CLOSE TOLERANCE

Solicitation # SPE4A6-27-T-7135

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Tunnel Liner Plate Material Supplier

Dot084500 Capital Program Administration Dotd8, Dot-dept Of Transportation

POSTED

DEADLINE

Aluminum Fabrication and Welding for HWRS Units

Nuwc Division Newport

POSTED

DEADLINE

Integrated Water Tank and Storage FabricationThis subcontract involves the fabrication and supply of integrated water tank and fuel storage assemblies for prime contractors supporting DLA Troop Support projects. The scope of work requires the manufacture of an insulated potable water tank with a minimum capacity of 80 gallons, featuring an integrated storage rack capable of holding at least five 5-gallon fuel cans. The selected provider is responsible for the delivery of the fully installed assembly. The project is categorized under NAICS code 332312 and will be performed in Natick. Interested parties must adhere to the response deadline of November 4, 2026. This effort is managed under the Department of Defense for the DLA Troop Support agency.

POSTED

DEADLINE

Tactical Chassis FabricationThe Tactical Chassis Fabrication subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves the production of lightweight and ruggedized housing and chassis for aircraft interior decontamination projects. These components are designed for the Joint Project Manager for CBRN Special Operations Forces and must be manufactured using composite materials and lightweight alloys. Each enclosure is required to fit within a 42 by 18 by 18 inch envelope and maintain a total weight of 150 pounds or less. To ensure operational viability, all deliverables must adhere to MIL-STD-1472 human engineering and lift requirements, resulting in a transportable chassis with integrated stowage. The project is categorized under NAICS code 332312 and will be performed in Abell. Interested parties must submit their responses by the deadline of November 24, 2026.

POSTED

DEADLINE

Stator Core Lamination Fabrication

POSTED

DEADLINE

Steel and Other Metal Materials for the Marietta Repair Station: Stamford De-Watering Box Material PH 1

Solicitation # W9123727QA011

Solicitation W9123727QA011 is a firm-fixed price commercial supply contract issued by the US Army Corps of Engineers, Huntington District, for the procurement of various steel and metal materials to support the Stamford De-Watering Box project at the Marietta Repair Station in Ohio. This procurement is a 100 percent small business set-aside under NAICS code 332312. The required materials include a wide array of ASTM standard products, specifically ASTM 1018 CR round bars, ASTM A434 CL bc, ASTM A53 seamless pipe, ASTM 1026 seamless tubing, ASTM A36 plates and bars, ASTM A709 Gr 50 plates, T-beams, and flat bars, as well as ASTM A325 fasteners. Specialized fabrication is required for certain ASTM 709 Gr 50 plates, including 1/8 inch tolerances and 45-degree double bevels as specified in the technical drawings. The selected vendor is responsible for arranging shipping to the Marietta Repair Station, with the government handling the unloading of materials upon arrival. All deliveries must be completed within eight weeks of the award date and must be accompanied by traceable mill certifications and testing reports. To be eligible for award, firms must be registered in the System for Award Management and comply with DFARS clauses 252.225-7001 and 252.225-7002 regarding the Buy American and Balance of Payments Program and Qualifying Country Sources as Subcontractors. The contract will be awarded using simplified acquisition procedures, and final invoicing is to be submitted via email once all materials are delivered onsite.

W072 Endist Huntington

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0145

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Environmental Control Work Booth/ Sanding Booth.

Solicitation # FA480027Q0005

POSTED

DEADLINE

Purchase of 2 or 3 Temporary Road Bridges

Solicitation # 12444627Q0004

Csa East 7 Usda-Fs

POSTED

about 19 hours ago

DEADLINE

in 14 days

AI Contract Overview

La Ville de Saguenay sollicite des soumissions pour la fabrication de conteneurs en acier de 6 et 8 verges cubes, dotés d’un toit en angle de type incliné et conçus pour un chargement frontal afin de collecter les plastiques agricoles. Le contrat sera attribué au soumissionnaire offrant le prix le plus bas tout en respectant intégralement les exigences techniques et administratives du marché. La Ville se réserve le droit de ne pas accepter la soumission la plus basse ou toute autre soumission reçue, et n’engage aucune obligation envers les soumissionnaires. Seules les entreprises établies au Canada ou dans un territoire couvert par un accord intergouvernemental sont éligibles à soumettre une offre. Les soumissions doivent être déposées au secrétariat de la division de l’approvisionnement, située au 3501, rue du Roi-Georges à Jonquière, ou transmises par voie électronique via le SÉAO, avant le 15 juin 2026 à 16h, date pouvant être reportée. Le contrat est lié au code NAICS 332312 et fait partie d’un processus de sollicitation publique géré par la Ville de Saguenay, avec Mylène Morin comme autorité contractuelle.

General Info

Ville de Saguenay seeks bids for steel agricultural plastic containers, lowest compliant bid wins, deadline June 15, 2026.

Agency

Government of Canada → Ville de Saguenay

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Saguenay-Lac-Saint-Jean, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 1

Solicitation

Response DeadlineJun 15

Deadline has passed

Submission Closed

06/15/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Ville de Saguenay

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Ville de Saguenay

Office AddressN/A

Contacts

Morin MylèneContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

Appel d’offres 2026-340 FABRICATION DE CONTENEURS EN ACIER La Ville de Saguenay demande des soumissions pour la fabrication de conteneurs 6 et 8 verges cubes à toit en angle, type « incliné » en mode chargement avant pour collecter les plastiques agricoles. Le Contrat est adjugé au plus bas soumissionnaire conforme. La Ville de Saguenay ne s’engage à accepter ni la plus basse, ni aucune des soumissions reçues, et n’encourra aucune obligation quelconque envers le ou les soumissionnaires. Les soumissions doivent être reçues au secrétariat de la division de l’approvisionnement, 3501, rue du Roi-Georges, Jonquière (Québec) G7X 1V6 ou par voie électronique via le SÉAO avant le 15 juin 2026 11h ou à toute date ultérieure en cas de report de la date et heure limite de réception des soumissions. Seules seront considérées aux fins d’octroi du contrat, les soumissions des entreprises ayant un établissement au Canada ou dans un territoire visé par un Accord Intergouvernemental. STÉPHANIE LAFLEUR, ING. Assistante-trésorière approvisionnement par intérim, Service des finances - division de l’approvisionnement