Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Fabrication of Metal Tube Assemblies (NSN 4710-00-930-2068)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312
New
ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)
Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf
Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.
Parsons Corporation

POSTED

26 minutes ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7M0-27-T-0724
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 332312
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-27-T-7135
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
NAICS: 332312
New
SLED
Tunnel Liner Plate Material Supplier
Dot084500 Capital Program Administration Dotd8, Dot-dept Of Transportation

POSTED

about 8 hours ago

DEADLINE

in 14 days
NAICS: 332312
New
Federal
Tactical Chassis Fabrication
W6QK Acc-Apg

POSTED

about 11 hours ago

DEADLINE

in 28 days
NAICS: 332312
New
Federal
Steel and Other Metal Materials for the Marietta Repair Station: Stamford De-Watering Box Material PH 1
Solicitation # W9123727QA011
Solicitation W9123727QA011 is a firm-fixed price commercial supply contract issued by the US Army Corps of Engineers, Huntington District, for the procurement of various steel and metal materials to support the Stamford De-Watering Box project at the Marietta Repair Station in Ohio. This procurement is a 100 percent small business set-aside under NAICS code 332312. The required materials include a wide array of ASTM standard products, specifically ASTM 1018 CR round bars, ASTM A434 CL bc, ASTM A53 seamless pipe, ASTM 1026 seamless tubing, ASTM A36 plates and bars, ASTM A709 Gr 50 plates, T-beams, and flat bars, as well as ASTM A325 fasteners. Specialized fabrication is required for certain ASTM 709 Gr 50 plates, including 1/8 inch tolerances and 45-degree double bevels as specified in the technical drawings. The selected vendor is responsible for arranging shipping to the Marietta Repair Station, with the government handling the unloading of materials upon arrival. All deliveries must be completed within eight weeks of the award date and must be accompanied by traceable mill certifications and testing reports. To be eligible for award, firms must be registered in the System for Award Management and comply with DFARS clauses 252.225-7001 and 252.225-7002 regarding the Buy American and Balance of Payments Program and Qualifying Country Sources as Subcontractors. The contract will be awarded using simplified acquisition procedures, and final invoicing is to be submitted via email once all materials are delivered onsite.
W072 Endist Huntington

POSTED

about 11 hours ago

DEADLINE

in about 21 hours
NAICS: 332312
New
DIBBS
17--HANDRAIL
Solicitation # SPE8EF-27-T-0145
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 11 hours ago

DEADLINE

in 13 days
NAICS: 332312
New
Federal
Environmental Control Work Booth/ Sanding Booth.
Solicitation # FA480027Q0005
FA4800 633 Cons Pkp

POSTED

about 11 hours ago

DEADLINE

in 17 days
NAICS: 332312
New
Federal
Purchase of 2 or 3 Temporary Road Bridges
Solicitation # 12444627Q0004
Csa East 7 Usda-Fs

POSTED

about 11 hours ago

DEADLINE

in 14 days
NAICS: 332312
New
SLED
Steel Embedded Items and Lintel SupplyThis subcontract for Steel Embedded Items and Lintel Supply involves providing essential steel components for Harford County Public Schools facility projects. The selected vendor will be responsible for furnishing and delivering anchor bolts, leveling plates, steel lintels, base plates, bearing plates, sleeves, angles, and channels directly to the jobsite. All supplied materials must strictly comply with the Buy American Steel Act, and the scope of work is limited to supply and delivery, as installation will be handled by other trades. The opportunity is categorized under NAICS code 332312 and is managed by the state of Maryland. Interested parties should note the tight response window, with the solicitation posted on October 26, 2026, and the deadline for responses set for October 29, 2026.
Harford County Public Schools

POSTED

1 day ago

DEADLINE

in 2 days
NAICS: 332312
New
SLED
Miscellaneous Metals and StairsThis subcontract for Miscellaneous Metals and Stairs involves the fabrication and installation of secondary metal elements for prime contractors working on Harford County Public Schools facility projects. The scope of work specifically includes the delivery and installation of metal pan stairs, grating stairs, interior and exterior pipe and tube railings, and various miscellaneous metal supports. A critical requirement for this contract is the provision of a Maryland Professional Engineer for the delegated design of all stairs, handrails, ladders, and guardrails. Interested parties should note the response deadline of October 29, 2026, for this Maryland-based project.
Harford County Public Schools

POSTED

1 day ago

DEADLINE

in 2 days
NAICS: 332312
New
DIBBS
MOUNT, RESILIENT, WEAPON
Solicitation # SPE4A7-27-T-2100
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

Show more

This subcontract involves the fabrication of metal tube assemblies, specifically identified by NSN 4710-00-930-2068, for prime contractors under Defense Logistics Agency supply contracts. The scope of work includes bending and forming metal tubing and performing component brazing in strict accordance with AWS-C3.4, AWS-C3.5, or AWS-C3.6 standards. All manufacturing processes must utilize precision tube bending machinery and materials that comply with ASTM A1011/A1011M specifications to ensure high-quality production for the Department of Defense's Fluid Handling Division. To qualify for this contract, providers must meet rigorous cybersecurity and regulatory requirements, including CMMC Level 2 and DFARS 252.204-7012 certification. The solicitation falls under NAICS code 332312 and is managed through the DLA. Interested parties must adhere to the established response deadline of September 11, 2026, to be considered for this specialized manufacturing opportunity.

General Info

Fabricate metal tube assemblies following AWS and ASTM standards for Defense Logistics Agency contracts.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-376P.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE ASSEMBLY, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Manufactures metal tube assemblies for prime contractors on DLA supply contracts. Bends and forms metal tubing and performs brazing of components using AWS-C3.4, AWS-C3.5, or AWS-C3.6 standards. Utilizes precision tube bending machinery and materials compliant with ASTM A1011/A1011M. Requires CMMC Level 2 and DFARS 252.204-7012 certification. Delivers finished Metal Tube Assemblies (NSN 4710-00-930-2068).

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 331210
New
DIBBS
Aerospace Grade Metal Tubing SupplyThis subcontract, managed by the Fluid Handling Division of the Department of Defense, involves the supply of aerospace grade raw metal tubing for prime contractors working on DLA Land and Maritime aircraft engine projects. The required tubing must feature a 1.250 inch outer diameter and a 0.035 inch wall thickness, strictly adhering to GE Drawing 1296M75 Rev N. Performance for this contract takes place at Tinker AFB. To ensure quality for critical application items, the supplier must provide full material certifications and Mill Test Reports. Additionally, all delivered stock must comply with the Buy American Act. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026, under NAICS code 331210.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 336413
New
DIBBS
Precision Aerospace Tube FabricationThis subcontract through the Department of Defense Fluid Handling Division requires the manufacture of 13 precision metal tube assemblies for DLA Land and Maritime aircraft engine projects. The fabrication must adhere to General Electric Drawing 1296M75 Rev N and Specification P3TF19-S2, specifically producing tubes with a 1.250 inch outer diameter and a 0.035 inch wall. Performance will take place at Tinker AFB. Eligible contractors must possess precision tube bending equipment and hold either SAE AS9003 or ISO 9001 certification. Additionally, the provider must be a prequalified source or secure approval from the Government Design Control Activity. The response deadline for this opportunity is October 28, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 332710
New
DIBBS
Supply of Tube and Fittings, MThis subcontract involves the supply of 3,000 units of specialized tubes and fittings for prime contractors supporting Department of Defense supply contracts. Managed by the Fluid Handling Division, the contract requires all materials to be manufactured or sourced in strict accordance with NSN 013156793, FSC 4710, and specific DLA Technical and Quality Requirements. Performance will take place at Tinker AFB. The provider is responsible for preparing all items for Government-Arranged Transportation under the First Destination Transportation program. Additionally, the contractor must maintain strict cybersecurity compliance, adhering to NIST SP 800-171 and DFARS 252.204-7012 standards. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026.
Machine Shops

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 332999
New
DIBBS
Supply of Bypass Tubes (NSN 4320007909742)This subcontract involves the manufacture or sourcing of six bypass tubes identified by NSN 4320007909742 for the Department of Defense Fluid Handling Division. The components must meet exact technical specifications and are intended for prime contractors operating under Defense Logistics Agency supply contracts. Performance will take place at Hill AFB, with the final units packaged for Government-Arranged Transportation. The contractor is required to maintain strict cybersecurity standards, ensuring full compliance with NIST SP 800-171 and DFARS 252.204-7012 to safeguard covered defense information. This procurement falls under NAICS code 332999, with a response deadline set for October 28, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 333914
New
DIBBS
FILTER BODY, FLUID
Solicitation # SPE7M4-27-T-0110
Solicitation SPE7M4-27-T-0110 is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two fluid filter bodies, identified by NSN 4330-01-517-6934 and PTI Technologies Inc. part number 7594170-001. This critical application item is categorized under NAICS 333914. The required delivery date is December 20, 2026, with a need ship date of October 6, 2026, and a delivery timeframe of 104 days after order. Delivery is FOB Origin, with the destination for both inspection and acceptance being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic payment requests and receiving reports. Offerors must submit quotes via the DLA Internet Bid Board System and comply with the Buy American and Balance of Payments Program, as well as specific cybersecurity and safeguarding regulations for covered defense information.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 331210
New
DIBBS
TUBE AND FITTINGS, M
Solicitation # SPE7M4-26-T-8102
Solicitation SPE7M4-26-T-8102 is issued by the Department of Defense Fluid Handling Division for the procurement of three metallic tubes and fittings, identified by NSN 4710-01-315-6793. The requirement is not a small business set-aside and falls under NAICS code 331210. Delivery is required within 248 days after the date of order, with a target delivery date of November 27, 2026, to the DLA Distribution Depot Oklahoma at Tinker AFB. The procurement is managed under the First Destination Transportation program with FOB Origin terms, and both inspection and acceptance will occur at the destination per FAR 52.246-2. Compliance requirements include adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 for packaging. All shipments must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 standards. The contract mandates strict cybersecurity compliance, requiring a CMMC Level 2 self-assessment and the posting of NIST SP 800-171 summary scores in the Supplier Performance Risk System. Additionally, the Buy American and Balance of Payments Program applies to quotes above the micro-purchase threshold, and the use of additive manufacturing processes is prohibited unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 334513
New
DIBBS
INDICATOR ASSEMBLY
Solicitation # SPE7M4-26-T-448G
Solicitation SPE7M4-26-T-448G is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of one Indicator Assembly, identified by NSN 6695-996798615 and Mission Systems Wimborne Limited part number 3415271. The requirement falls under NAICS code 334513. The item is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a need ship date of March 23, 2027, and an original required delivery date of March 17, 2028. Delivery is expected within 165 days after order. The contract mandates strict adherence to quality and technical standards, including CMMC Level 2 Self-Assessment and the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will occur at the origin per FAR 52.246-2, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Offerors must submit quotes via the DIBBS system and comply with the Buy American Act and Berry Amendment. Payment will be processed electronically through the Wide Area WorkFlow system.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 333914
New
DIBBS
TUBE, BYPASS
Solicitation # SPE7M4-26-T-6863
Solicitation SPE7M4-26-T-6863 is a federal procurement issued by the Department of Defense Fluid Handling Division for six units of bypass tubes, identified by NSN 4320-00-790-9742. The requirement is managed under the First Destination Transportation program with a delivery timeframe of 168 days, targeting a need ship date of August 18, 2026, and a final required delivery date of November 10, 2026. Performance and delivery are set for Hill AFB, Utah, with inspection and acceptance occurring at the destination. The procurement is not a small business set-aside and falls under NAICS code 333914. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Offerors proposing alternate parts must provide a complete data package for evaluation. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessments is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Award evaluation may include a price preference for HUBZone concerns, while items produced via additive manufacturing are ineligible for award unless specifically authorized.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-393G
Solicitation SPE7M4-26-T-393G is a fixed-price procurement for 660 units of a commercial gasket, identified as a critical application item under NSN 5330005657096. The requirement specifies Parker-Hannifin Corporation part numbers 3387007 and BACG10BK256G, adhering to reference drawing 81205 BACG10BK Revision C. The items must be free of asbestos per FED-STD-313 and comply with MIL-STD-130N for identification marking. Delivery is required within 18 days after order, with a need ship date of October 10, 2026, and a final delivery date of March 31, 2027, to the DLA Distribution Depot at Tinker AFB, Oklahoma. Quality assurance is governed by destination inspection and acceptance, utilizing sampling methods from MIL-STD-1916 or ASQ H1331. Packaging must follow MIL-STD-2073-1E and RP001, specifically requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent ultraviolet ray deterioration. The contract incorporates various FAR and DFARS clauses, including those for equal opportunity, subcontracts for commercial products, and safeguarding covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-190E
Solicitation SPE7M4-26-T-190E is a small business set-aside issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 13 metal tube assemblies. These components are identified as critical application items for the F110-GE-100 aircraft engine and are designated as restricted source items, requiring engineering source approval by the Government Design Control Activity. The items must be manufactured according to General Electric Drawing 1296M75 Rev N and Specification P3TF19-S2, with a specific requirement to use paragraph 3.4.1, part C instead of part B. The delivery is set for 316 days after order, with a required delivery date of May 12, 2027, shipped FOB Origin to Tinker AFB, Oklahoma. The contract mandates strict quality and compliance standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the destination based on conformance to the specified drawings and standards. Key regulatory requirements include CMMC Level 2 Self-Assessment, safeguarding of covered defense information per DFARS 252.204-7012, and adherence to the Buy American Act. Packaging must comply with RP001 and MIL-STD-129, and all invoicing must be processed electronically through Wide Area WorkFlow. The procurement falls under NAICS code 332996.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-27-T-0040
Solicitation SPE7M3-27-T-0040, issued by the DLA Land and Maritime Fluid Handling Division, seeks quotes for five bronze pipe elbows with a 3/8 inch pipe size (NSN 4730-00-142-1190). The required delivery date is March 15, 2027, with a delivery period of 150 days after order. Shipping is FOB Origin, with inspection and acceptance occurring at the destination in New Cumberland, Pennsylvania. The successful contractor must provide one copy of a Certificate of Quality Compliance and adhere to specific technical data including Basic Drawing NR 80064 1385941 Revision H and Reference QAP 13873. This procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-control training. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, specifically prohibiting mercury compounds. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system. Additionally, the solicitation includes a price evaluation preference for SBA-certified HUBZone small businesses and prohibits the use of additive manufacturing unless specifically approved by the Contracting Officer.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

4 days ago

DEADLINE

in about 18 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332312
Closed
DIBBS
Close Tolerance Screw Supplier
ASC COMMODITIES DIVISION

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Manufacturing of Metal Tube Assemblies (NSN 4710010094306)
FLUID HANDLING DIVISION

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Manufacture and Supply of Pipe to Tube Elbows
FLUID HANDLING DIVISION

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Supply of Close Tolerance Screws (NAS1153-5)
ASC COMMODITIES DIVISION

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Manufacture of Connecting Link, Rig (NSN 3040-01-095-7522)
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Manufacture and Supply of Battery Box Covers (PN 6160-01-658-8208)
Defense Logistics Agency

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Manufacturing and Supply of Angle Brackets
LAND SUPPLY CHAIN

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Supply of Vehicular Bracket C (NSN 2590016503766)
LAND SUPPLY CHAIN

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Supply of Set Screws (NSN 5305-00-115-4446)
ASC COMMODITIES DIVISION

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Manufacturing and Supply of Mounting Bracket (NSN 5340-01-266-6034)
LAND SUPPLY CHAIN

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Awarded
DIBBS
PANEL, STRUCTURAL, AI
Solicitation # SPE4A7-25-T-1427
Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 332312
Awarded
DIBBS
BRACKET, DOUBLE ANGLE
Solicitation # SPE4A624FCPC1
Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS