This Government Contract opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Fabrication of Removal Tool Assembly (NIIN 010940513)

Closed

Federal

Submission Closed10/02/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333318

New

DIBBS

Drinking Water Dispenser SupplierThis subcontract involves the supply of 17 drinking water dispenser units for prime contractors supporting the Department of Defense at the DDSP New Cumberland facility. The units must be manufactured or sourced to meet specific electrical configurations of 120V/60HZ/1PH and must strictly adhere to mercury-free material restrictions, the Buy American Act, and the Berry Amendment. To ensure operational readiness and transport safety, all deliverables must comply with RP001, MIL-STD-2073-1E, and MIL-STD-129 packaging standards. The opportunity is categorized under NAICS code 333318, with a response deadline set for October 13, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Lift Truck Forks (NSN 3930015777206)This subcontract, issued by the Department of Defense under the agency Construction & Equipment Manu & Con, requires the manufacture or sourcing of five specialized lift truck forks. The equipment must strictly adhere to NSN 3930015777206 and the DLA Master List of Technical and Quality Requirements for delivery to a designated DoDAAC location in New Cumberland. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333318. Key compliance mandates include the full disclosure of any non-domestic materials used in production and a guarantee that no covered telecommunications equipment is utilized. The response deadline for this requirement is October 13, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Air Conditioning Filter Elements (NSN 4130015384341)This subcontract involves the manufacture and supply of air conditioning filter elements specifically meeting the technical requirements of NSN 4130015384341. The selected provider will support prime contractors delivering on Department of Defense supply contracts for the agency in San Diego. All deliverables must adhere to strict packaging and palletization standards, including DLA RP001, ASTM D3951, and MIL-STD-129, while ensuring full compliance with the Buy American and Balance of Payments Program. The project falls under NAICS code 333318 and is managed by the Department of Defense. Performance of the contract will take place in San Diego, California. Interested parties must respond by October 13, 2026, to provide the required packaged and marked filter elements as specified in the technical guidelines.

POSTED

DEADLINE

Manufacturing of Shock Absorber, LockbarThis subcontract involves the manufacture of shock absorber and lockbar assemblies for prime contractors supporting Department of Defense supply contracts. The work is performed in Tracy, California, utilizing precision machining and assembly equipment to meet RA001 technical and quality requirements. All deliverables must be marked and packaged in accordance with MIL-STD-129. The contractor is required to maintain strict regulatory compliance, specifically adhering to DFARS 252.223-7008 regarding Hexavalent Chromium and DFARS 252.225-7048 for export-controlled items. This procurement falls under NAICS code 333318 and is managed through the Department of Defense.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Air Purification System Filter Units (NSN 4460015924168)This HUBZone set-aside subcontract involves the supply of 102 air purification system filter units, identified by NSN 4460015924168, for prime contractors supporting DLA Troop Support Construction and Equipment contracts. The project is managed under the Department of Defense for the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The contractor must adhere to strict regulatory standards, including RP001 packaging requirements and DFARS 252.223-7001 hazard labeling. Additionally, all units must comply with domestic sourcing restrictions mandated by the Berry Amendment and the Buy American Act. All delivery and invoicing processes are to be managed through the Wide Area Workflow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PROCESSMASTER FEW632 ELECTROMAGNETIC FLOWMETER, MFR. ABB

Solicitation # 232327

The City of Los Angeles General Services agency is seeking bids for the procurement of a ProcessMaster FEW632 Electromagnetic Flowmeter manufactured by ABB. This solicitation, identified by number 232327, falls under NAICS code 333318 and will be performed in Los Angeles, California. Interested vendors must submit their responses by the deadline of October 7, 2026, at 6:00 PM. Detailed information and the bidding process are available through the City of LA Vendor Self Service Website, and inquiries can be directed to the point of contact, Charla Hillary.

POSTED

DEADLINE

Supply of Hydraulic and Mechanical Sweeper BroomsThis subcontract focuses on the supply of specialized hydraulic and mechanical drive sweeper brooms for prime contractors working on Virginia Department of Transportation equipment contracts. The scope of work involves manufacturing or sourcing 8-foot length brooms equipped with 3-point hitches and hydraulic angling capabilities, including truck-mounted units. To ensure fleet standardization, all provided units must be of a single brand. The selected provider is responsible for delivering the sweeper brooms along with detailed technical specification sheets directly to VDOT District Shops across Virginia. This statewide effort falls under NAICS code 333318 and requires adherence to the specific technical requirements set forth by the agency to maintain operational consistency.

Virginia Department of Transportation

POSTED

DEADLINE

Tarp System Supply & InstallationThis subcontract agreement involves the supply and installation of automated tarping systems for prime contractors working on vehicle projects for the State of Louisiana Office of State Procurement. The scope of work requires the delivery of fully operational systems, specifically specifying Donovan Bullet tarp systems or an equivalent that meets the same performance standards. These systems must feature 12-volt direct drive motors equipped with in-cab controls. The opportunity is categorized under NAICS code 333318 and is managed by the Louisiana Procurement agency. Interested parties must submit their responses by the deadline of October 28, 2026, at 4:00 PM. The primary objective of the contract is to ensure that all installed automated tarp systems are fully functional and meet the rigorous technical specifications required for state vehicle projects.

POSTED

DEADLINE

Snowplow Equipment SupplierThis subcontract agreement establishes a partnership to supply snowplow units and associated mounting hardware for prime contractors working on Commonwealth of Virginia vehicle projects. Managed by the Virginia Department of Conservation and Recreation, the contract requires the provision of specific manufacturer equipment and components that strictly adhere to solicitation specifications. To ensure full product compliance, the supplier must provide comprehensive descriptive literature and catalog cuts. The physical delivery of the snowplow units and hardware must be completed at the installation site, specifically Pocohontas State Park, within 45 days after receiving the order. This procurement falls under NAICS code 333318 and is subject to the timelines and requirements set forth by the agency to support state vehicle infrastructure.

Department of Conservation and Recreation

POSTED

DEADLINE

Supply of Constant Flow Compressed Gas RegulatorsThis subcontract involves the supply of 16 constant flow compressed gas regulators, identified by NSN 4820015207264, for prime contractors working on DLA Land and Maritime hardware projects. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The supplier must ensure all units adhere to RP001 DLA Packaging Requirements and comply with the Hazard Communication Standard 29 CFR 1910.1200 regarding the labeling of hazardous materials. The procurement falls under NAICS code 333318, with a response deadline set for October 13, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Precision Fabrication of Installation Tool, CThis subcontract involves the precision fabrication of Installation Tool, C for prime contractors supporting Defense Logistics Agency supply contracts. The selected manufacturer must produce the tool in strict accordance with TDP Rev A Gen 1 and basic drawing NR 80020 419489, while ensuring all bare item markings are applied and NAVAIR Aircraft Launch and Recovery Equipment traceability standards are met. The project requires the use of precision machining equipment and mandates that the contractor maintains CMMC Level 2 certification. Performance will take place at Joint Base MDL, with the final deliverable being the finished, marked, and certified tool. Responses for this requirement are due by October 13, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Leveling-Support Jacks (NSN 5120011296164)This subcontract involves the manufacture or procurement of two specialized mechanical leveling-support jacks, identified by NSN 5120011296164, for prime contractors supporting the Department of Defense. The supplier must ensure all units adhere to the DLA Master List of Technical and Quality Requirements and follow ASTM D3951 packaging standards. Additionally, the contract mandates strict compliance with the Buy American Act and the Berry Amendment. The project is managed under NAICS code 333318 for SMSG AVIATION SUP CH CORPORATE LTC, with the place of performance located in Cherry Point. The successful contractor is required to deliver the two completed leveling-support jacks within a 20-day timeframe.

SMSG AVIATION SUP CH CORPORATE LTC

POSTED

6 days ago

DEADLINE

in 2 days

AI Contract Overview

This subcontract involves the fabrication of the Removal Tool Assembly for prime contractors supporting Navy NAVSUP-WSS projects. The scope of work requires the machining, fabrication, and assembly of tool components using CNC machines, lathes, and mills to ensure strict adherence to technical specifications for NSN 4470-01-094-0513. The contractor is responsible for cleaning, marking, and packaging the assemblies in accordance with IRPOD and MIL-STD-2073 standards. Additionally, a Certificate of Compliance must be provided per DI-MISC-A81356 upon delivery. This project falls under NAICS code 333318 and is managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency.

General Info

Fabrication of Removal Tool Assembly for Navy NAVSUP-WSS projects per technical specifications.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

333318 - Other Commercial and Service Industry Machinery Manufacturing

Place of Performance

Set-Aside

NONE

Documents

This scope was carved out of N0010426QEF90.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

REMOVAL TOOL,ASSEMB

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 2

subcontract

Response DeadlineOct 2

Deadline has passed

Submission Closed

10/02/2026, 08:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Manufactures the Removal Tool Assembly for prime contractors on Navy NAVSUP-WSS projects. Machines, fabricates, and assembles tool components using CNC, lathes, and mills to meet technical specifications for NSN 4470-01-094-0513. Cleans and marks the assembly and packages items per IRPOD and MIL-STD-2073. Provides a Certificate of Compliance per DI-MISC-A81356. Delivers the completed, marked, and packaged assembly.