Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Factory-Installed Tow Hitch and Safety Systems Integration

Active

State & Local

Response Deadline08/31/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply and integration of factory-equipped safety and towing systems, including a tow hitch, rear vision camera, lane departure warning, forward collision alert, automatic emergency braking, and front pedestrian braking. These systems must be installed at the manufacturing stage to ensure seamless integration with the vehicle’s existing architecture and comply with original equipment standards. The work is classified under NAICS code 336310, indicating it pertains to motor vehicle parts manufacturing, and is structured as a subcontract under Teton County’s procurement in Wyoming. All deliverables must be completed and submitted no later than August 31, 2026, with the solicitation posted on July 30, 2026. The place of performance and point of contact details are not specified, but the procurement is accessible through the PublicPurchase platform for interested bidders.

General Info

Supply and integrate factory-installed safety and towing systems by August 31, 2026, under Teton County procurement in Wyoming.

Agency

Wyoming → Teton CountyView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

WY, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 31

Submission deadline

Response Deadline

08/31/2026, 06:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyWyoming → Teton County

ContactsNo contacts available

OfficeN/A

Organization / Agency

Wyoming → Teton County

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and integration of factory-equipped tow hitch, rear vision camera, lane departure warning, forward collision alert, auto emergency braking, and front pedestrian braking systems.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7L1-26-T-823H

This contract specifies the procurement of an O-RING with part number KRP203321V-ORING and NSN 5331016878523, requiring a quantity of 176 units to be delivered FOB origin within 44 days of award. The item is classified as a Type I shelf-life item with a non-extendable lifespan of 180 months, governed by RS039 and identified by special marking code 32. All packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the product is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Marking and palletization must follow MIL-STD-129 and DLA packaging requirements. The delivery destination is DLA Distribution San Diego, with the same address used for freight shipping and parcel post. Inspection and acceptance occur at the destination with zero variance permitted in quantity. The contract references technical and quality standards from the DLA Master List and incorporates requirements for hazardous materials packaging and transportation as per IP025 and DLAD Proc Note C19/C20. The solicitation was issued under SPE7L1-26-T-823H with a response deadline of July 20, 2026, and an original required delivery date of February 3, 2027, though the needed ship date is set for September 3, 2026.

LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

INJECTOR ASSEMBLY, FUEL

Solicitation # SPE7L2-26-Q-0009

The contract pertains to the procurement of a Fuel Injector Assembly identified by NSN 2910-01-727-8637 and part number 55510920, supplied by GM Defense LLC under solicitation SPE7L2-26-Q-0009. The item is classified as a Commercial Off the Shelf (COTS) product with no shelf life requirement, and the contract mandates strict compliance with DLA’s technical and quality standards as outlined in the DLA Master List of Technical and Quality Requirements. The use of Class I ozone-depleting chemicals is completely prohibited, superseding any conflicting specification requirements, and any substitute chemicals must be submitted for approval unless explicitly authorized. The product must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking code, with palletization following DLA Packaging Requirements. The contract specifies a Firm Fixed Price term with no variance allowance, requiring delivery of exactly three units within 90 days after award. Inspection and acceptance occur at the destination, with FOB origin terms applying. Delivery is to the DLA Distribution facility in New Cumberland, PA, and transportation procedures must adhere to DLAD Proc Notes C19 and C20. Pricing is structured in quantity tiers with applicable prices for ranges of 4–5, 6–10, and 11–15 units, though actual order quantity is fixed at three units. The material need date is October 1, 2026, and the solicitation response deadline was August 7, 2026. The NAICS code is 336310, and the primary point of contact is Shaun Sehgal of the Department of Defense, Land Supplier Opns Wheeled Vehicles.

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 18 hours ago

DEADLINE

Filter Element Supply (Commercial Off-the-Shelf Item)The contract calls for the supply of 19 commercial filter elements identified by NSN 2940-01-624-7575 and part number 142-1404, classified as a commercial off-the-shelf item under NAICS code 336310. The items must comply with all applicable military packaging and labeling standards, along with commercial item subcontracting requirements, ensuring adherence to Department of Defense procurement protocols despite the commercial nature of the product. Delivery is required to be fulfilled at the place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002, and the contract is structured as a subcontract under the Land Supply Chain organization within the Department of Defense. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, leaving a window of 12 days for potential vendors to submit proposals. Although no specific point of contact or solicitation number is provided, the contract is accessible through the DIBBS portal via the provided link. The procurement does not include any set-aside designation, meaning it is open to all qualified commercial suppliers without restrictions based on business size or category. Compliance with military specifications for packaging and labeling remains a condition of award, even though the item is commercially available, reinforcing the need for vendors to understand and meet defense logistics standards.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Fuel Electrical Pump Supply (Commercial Off-The-Shelf)The contract solicits the supply of seven commercial off-the-shelf fuel electrical pumps designated by NSN 2910-01-598-9358, requiring full compliance with military specifications and hazardous material handling standards. These units are intended for deployment under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA under FAR 19.5, with the NAICS code 336310 classifying the industry as Aerospace Product and Parts Manufacturing. The solicitation was posted on July 30, 2026, and responses must be submitted by August 14, 2026, with the contracting authority being the Strategic Acquisition Program Directorate within the Department of Defense. Performance location details are not specified, and the contract is structured as a subcontract, indicating it may be part of a larger procurement initiative. All technical and regulatory requirements must be met without deviation to ensure operational suitability in defense environments.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Precision Machined Crankshaft SupplyThe contract calls for the supply of 15 precision-machined crankshafts for GMC 6.2L diesel engines, with all units required to meet military or original equipment manufacturer specifications to ensure dimensional accuracy, material integrity, and performance under operational stress. Each crankshaft must undergo strict quality control processes throughout fabrication, including surface finishing, balancing, and non-destructive testing to comply with industry and defense standards. Packaging must adhere to military specification guidelines for protection during transit and storage, ensuring units arrive in pristine, mission-ready condition without damage or contamination. The solicitation is classified as a subcontract under NAICS code 336310, indicating a focus on automotive engine component manufacturing, and is issued by the Department of Defense through LSO Combat Vehicles and Armament. The place of performance is listed as New Cumberland, Pennsylvania, with a response deadline of August 10, 2026, and the opportunity was posted on July 30, 2026. Interested parties must submit proposals prior to the deadline to be considered for award, and compliance with all technical, packaging, and delivery requirements is mandatory for qualification. No set-aside classification is specified, meaning the opportunity is open to all eligible contractors regardless of business size or status.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Kubota Tractor Parts (OEM or Authorized Distributor)Four units of Kubota part number 76550-34350 are required for delivery to DLA Land and Maritime under a subcontract titled Supply of Kubota Tractor Parts OEM or Authorized Distributor. The contract mandates strict adherence to military packaging, labeling, and hazardous materials standards to ensure full compliance with Department of Defense requirements. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and the place of performance is designated as Fort Carson, Colorado, with the zip code 80913-4093. The NAICS code 336310 identifies the industry as Motor Vehicle Body and Trailer Manufacturing, indicating the relevance to ground vehicle support systems. The contracting activity is managed by the Land Supply Chain under the Department of Defense, and vendors must qualify as original equipment manufacturers or authorized distributors to be eligible. All deliveries must meet military specifications without exception, and the contract is not subject to any specific set-aside classification.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Fuel Injector Assembly SupplyThe contract solicits the manufacture and delivery of 39 fuel injector assemblies under a subcontract arrangement, requiring full production capabilities, rigorous quality assurance protocols, and compliance with all applicable military standards for marking, handling, and packaging. The work must be completed in accordance with defense specifications, ensuring each unit meets the stringent performance and durability requirements expected for military applications. The place of performance is specified as Tracy, California, with a zip code of 95304-5000, indicating where the delivered assemblies must be shipped or where production must be conducted. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, allowing potential suppliers a limited window to submit proposals. The NAICS code 336310 identifies the industry as Engine, Turbine, and Power Transmission Equipment Manufacturing, aligning the scope with specialized defense-related engine component production. The contracting organization is listed as LAND SUPPLIER OPNS ENGINES under the Department of Defense, emphasizing the military nature of the procurement. All bids must adhere to the technical and administrative requirements set forth by the Department of Defense, and compliance with military handling and marking standards is non-negotiable for acceptance.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Manufacture of Fuel Tank, Engine (COTS Item)The contract involves the manufacture and supply of four commercial off-the-shelf fuel tanks designed for engine applications, identified by NSN 2910-01-727-2279 and part number 84577803, with full compliance to DLA technical requirements including RA001. These tanks are classified as COTS items and must meet all specified performance, quality, and documentation standards without modification or customization. The work is to be performed under a subcontract arrangement with a response deadline of August 10, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The North American Industry Classification System code assigned is 336310, indicating the nature of the work falls within the aerospace product and parts manufacturing sector. The solicitation was posted on July 30, 2026, and is managed by the Land Supply Chain organization under the Department of Defense. Although there is no set-aside designation, the procurement is intended for a subcontractor capable of delivering certified COTS components that align with existing military specifications. The equipment is critical for engine systems requiring standardized, reliable fuel storage solutions, and all delivered units must be fully documented and traceable to meet DLA’s logistical and compliance protocols. Contractors must ensure adherence to all technical, delivery, and certification requirements to qualify for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

FILTER ELEMENT, FLUI

Solicitation # SPE7L5-26-T-4708

This contract pertains to the procurement of a filter element for fluid systems, identified by part number 360-8960 and NSN 2910016145617, with a quantity of 24 units. The requirement is governed by technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and containerization, while marking must adhere to MIL-STD-129 with no special marking code applied. Delivery is required FOB origin within 157 days, with inspection and acceptance occurring at the destination. The unit of issue is each, with no variance allowed in quantity. The delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California, and the shipment must follow DLA transportation procedures C19 and C20. The contract was issued under solicitation SPE7L5-26-T-4708, with a response deadline in August 2026 and an original delivery date of January 15, 2027. The purchasing entity is the Department of Defense, under the Land Supplier Operations Engines division, with Randy Ith listed as the primary point of contact.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

FILTER ELEMENT, INTA

Solicitation # SPE7L1-26-T-899Z

The contract specifies the procurement of a filter element with NSN 2940-01-624-7575 and part number 142-1404, sourced from approved suppliers including Caterpillar, Wix Corp, Cummins Filtration, John Deere, and Donaldson Company. The requirement is for 19 units, each priced at $19.00, totaling $361.00, with a delivery timeline of 139 days from the contract award, to be delivered FOB origin. The inspection and acceptance points are both at the destination, and no quantity variance is permitted. Packaging must conform to ASTM D3951 and strictly follow MIL-STD-129 marking and labeling standards, with all DLA Master List technical and quality requirements taking precedence. The unit of issue is each (EA), and palletization must adhere to DLA’s packaging requirements. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for December 28, 2026. Transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7L1-26-T-899Z, issued under NAICS code 336310 by the Department of Defense’s Land Supply Chain, with Craig King as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-901H

The contract pertains to the supply of an O-RING with NSN 5331-15-030-7107 and part number 5803119435, manufactured by IVECO DEFENCE VEHICLES S.P.A., under solicitation SPE7L1-26-T-901H. Eleven units are required at a unit price of $11.00, with a total contract value of $121.00, and delivery must be made FOB origin within 147 days of the award date, with an original required delivery date of January 2, 2027. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of Federal Supply Classifications 5330/5331 components to ultraviolet degradation; this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. Packaging, marking, and shipping must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA Packaging Requirements, including specific codes for preservation, wrapping, cushioning, and unit containers. Special marking is not required, and palletization must follow DLA guidelines. Inspection and acceptance occur at destination, with no quantity variance permitted. The delivery address is DLA Distribution San Joaquin in Tracy, California, and transportation logistics follow DLA Procurement Notes C19 and C20. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with applicable revisions tied to the solicitation or award date depending on acquisition type.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-162L

The contract involves the procurement of 25 units of a COCK, DRAIN with NSN 4820016288498 and part number 310534, sourced from approved suppliers including ATICO-INTERNORMEN and EATON TECHNOLOGIES GMBH, under solicitation SPE7MC-26-T-162L issued by the Department of Defense’s DDSP New Cumberland Facility. The delivery is required within 173 calendar days from the award date, with a firm delivery date of January 31, 2027, under FOB Origin terms. All items must be packaged in compliance with ASTM D3951, but must fully adhere to the more stringent requirements of the DLA Master List of Technical and Quality Requirements, which takes precedence. Packaging and labeling must follow MIL-STD-129, including proper marking, barcoding, and palletization per RP001, with inspection and acceptance occurring at the destination facility located at 2083 Normandy Drive, New Cumberland, PA. The total contract value is $25.00, with no quantity variance permitted. The contract incorporates multiple Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses, many modified by deviations effective February 2026, addressing critical areas such as equal opportunity, combating human trafficking, employment eligibility verification, cybersecurity compliance with NIST SP 800-171, contract changes, subcontracting for commercial items, safeguarding covered contractor information systems, and payment provisions including accelerated payments to small business subcontractors. The contractor must comply with hazardous materials labeling requirements under DFARS 252.223-7001 and submit pre-award documentation for non-exempt hazardous substances. Electronic invoicing is mandatory via Wide Area WorkFlow (WAWF), and all submissions must be made through the DLA Internet Bid Board System. Offerors must hold a Unique Entity ID and accurately represent their socioeconomic status, including eligibility under 8(a), HUBZone, WOSB, or SDVOSB programs. While the contract type is unspecified, pricing is fixed, and the award is subject to simplified acquisition procedures. No formal attachments are listed, but referenced standards and requirements are binding through incorporation by reference. The contracting officer’s point of contact is Paula Mcclary, reachable at 614-692-0417

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Wyoming → Teton County

Same awarding agency

Rubberized Floor Mats and Vinyl Seat SupplyThe contract entails the supply and installation of OEM-compliant rubberized floor mats and vinyl seats to be completed prior to vehicle delivery, ensuring seamless integration and adherence to original equipment standards. The work falls under NAICS code 336350, indicating it is classified within the Motor Vehicle Body and Trailer Manufacturing sector, and is structured as a subcontract with no set-aside designation, open to all qualified vendors without preference based on small business or other classifications. The solicitation was posted on July 30, 2026, with a firm response deadline of August 31, 2026, at 6:00 PM, requiring timely submission of proposals from interested parties. Performance of the work is tied to the broader operations of Teton County, Wyoming, though specific geographic details for delivery or installation are not provided. All bids must be submitted through the public purchasing portal linked in the contract posting.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

DEADLINE

in about 1 month

Vehicle Warranty and Service SupportThe contract outlines the provision of comprehensive warranty support for vehicles, covering a basic warranty period of three years or 36,000 miles and an extended drivetrain warranty of five years or 60,000 miles. This support includes guaranteed access to authorized service facilities within Teton County, Wyoming, ensuring timely and localized repair capabilities. The scope further encompasses the delivery of detailed repair manuals to facilitate accurate diagnostics and maintenance, reinforcing the integrity and efficiency of service delivery across the warranty term. Service must be consistently available to meet the needs of vehicle owners throughout the entire duration of both warranty tiers. This subcontract is managed by Teton County in Wyoming under NAICS code 811111, which pertains to automotive mechanical and electrical repair and maintenance. The solicitation was posted on July 30, 2026, with responses required by August 31, 2026, though no specific set-aside provisions or organizational type restrictions are indicated. The place of performance is restricted to Teton County, Wyoming, and all contractual obligations must be fulfilled within that geographic boundary. The contract is accessible through a public procurement portal, and while no point of contact is listed, interested parties are directed to the official bidding platform for further details and submission procedures.

General Automotive Repair

POSTED

DEADLINE

in about 1 month

New ¾ Ton Crew Cab Pickup Truck SupplyTeton County is seeking the supply of a new, unused 2026 model year ¾ ton crew cab pickup truck from manufacturers such as Chevrolet 2500HD, Ford F-250, or an equivalent model, configured with a gasoline engine, 10-speed automatic transmission, four-wheel drive, and a white exterior. The contract is structured as a subcontract with a response deadline of August 31, 2026, at 6:00 p.m., and was posted on July 30, 2026. The NAICS code 424120 indicates the procurement falls under wholesale trade of motor vehicle parts and supplies, reflecting the nature of the vehicle procurement as a commercial transaction. The place of performance and specific delivery location are not detailed, and no set-aside provisions or agency organizational details are provided. Interested parties may access further information through the public purchase portal linked in the contract data.

Stationery and Office Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Fire/EMS 3/4 Ton Crew Cab Truck

Solicitation # FIRE 20260729

Teton County, Wyoming is seeking formal bids for the purchase and delivery of a new 3/4 Ton Crew Cab Truck to be used by Jackson Hole Fire/EMS for emergency response and departmental operations. The solicitation, identified as FIRE 20260729, was posted on July 30, 2026, with a deadline for responses set for August 31, 2026, at 6:00 PM MST. The vehicle must meet the operational needs of a first responder agency, ensuring reliability, durability, and suitability for the demanding conditions encountered in the region. Bidders are expected to submit proposals that detail vehicle specifications, pricing, delivery timelines, and any applicable warranties or support services. The contract is being managed by Teton County under its state and local government procurement authority, with no specific set-aside provisions indicated. All inquiries should be directed to Brian Coe, the primary point of contact, via email at bcoe@tetoncountywy.gov or phone at (307) 733-4732. The full solicitation details and submission guidelines are available through the public procurement portal linked in the posting.

New Car Dealers

POSTED

DEADLINE

in about 1 month

Project Management & Stakeholder CoordinationThe contract encompasses project management, schedule control, stakeholder coordination, and progress reporting for the development of the Protective Action Framework. It requires the contractor to oversee all phases of the framework’s creation, ensuring adherence to timelines, effective communication among stakeholders, and consistent delivery of progress updates. The work is classified as a subcontract under NAICS code 541611, indicating it involves management consulting services, and is issued by Teton County in Wyoming. The solicitation was posted on July 6, 2026, with responses due by August 7, 2026, at 11:00 PM. There is no specified set-aside type or location details beyond the state of Wyoming, and the point of contact information is not provided. Interested parties must submit proposals through the public purchase portal linked in the contract data.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Operational Product Development (Field Tools)Teton County is seeking a subcontractor to develop user-friendly operational tools designed for first responders, including pocket guides, checklists, decision matrices, and mobile-enabled applications aimed at improving field operations. The contract falls under NAICS code 541430, indicating a focus on graphic design services with an emphasis on practical, field-tested solutions that enhance situational awareness and decision-making during emergencies. Responses are due by August 7, 2026, and the work is expected to be performed under a subcontract arrangement, though no specific set-aside or organizational eligibility criteria are specified. The project does not list a point of contact or detailed place of performance, and the posting originates from a public procurement platform with no defined physical office address provided.

Graphic Design Services

POSTED

DEADLINE

HSEEP-Compliant Exercise Design & FacilitationThe contract seeks a subcontractor to design, conduct, evaluate, and document exercises that align with the Homeland Security Exercise and Evaluation Program standards to validate the Protective Action Framework. These exercises must be thorough, realistic, and structured to assess preparedness, response capability, and coordination across relevant stakeholders, with comprehensive documentation to support findings and improvements. All activities are expected to adhere strictly to HSEEP methodologies to ensure consistency, repeatability, and federal compliance in evaluating emergency management capabilities. The opportunity is posted under NAICS code 541611 for Management Consulting Services and is issued by Teton County in Wyoming as a subcontract with a response deadline of August 7, 2026. There is no specified set-aside designation or point of contact provided, and the place of performance lacks detailed location information, suggesting flexibility in execution while maintaining alignment with Teton County’s emergency planning objectives. Interested parties must submit proposals prior to the deadline to be considered for engagement in supporting critical homeland security preparedness initiatives.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Legal Review & Authority DocumentationThe contract requires a comprehensive legal review of the Protective Action Framework to ensure its defensibility under applicable laws and regulations, with a focus on clearly documenting the legal authorities supporting its implementation. This includes identifying and cataloging all relevant legal bases, delineating liability exposures, and establishing robust implementation protocols that align with statutory and regulatory requirements. The work must result in a legally sound and well-documented framework that can withstand scrutiny and support operational compliance. The contract is classified as a subcontract under NAICS code 541110, which pertains to legal services, and was posted on July 6, 2026, with a response deadline of August 7, 2026. The agency issuing the solicitation is Teton County in Wyoming, though no specific office address or point of contact is provided. The place of performance details are also unspecified, and there is no set-aside designation or type of set-aside description listed. Interested parties must submit proposals through the provided public purchase portal before the deadline to be considered.

Offices of Lawyers

POSTED

DEADLINE

Transportation & Evacuation Route AnalysisTeton County is seeking a subcontractor to perform comprehensive transportation network analysis focused on emergency planning, including evacuation route modeling, shelter-in-place logistics, and the design of emergency access and egress systems. The work requires specialized expertise in transportation modeling to ensure efficient, safe, and scalable movement of people during crises, with attention to geographic and infrastructural constraints specific to the region. The solicitation, classified under NAICS code 541340 for architectural and engineering services, is open for responses until August 7, 2026, and is intended to support public safety initiatives in Wyoming. The project does not specify a set-aside designation or detailed performance location, and all submissions must be made through the provided public procurement portal.

Drafting Services

POSTED

DEADLINE

Emergency Management Framework & Operational Guidance DevelopmentTeton County is seeking a subcontractor to develop a practical, decision-focused Emergency Management Framework and Operational Guidance designed for direct use by field personnel during emergency response scenarios. The primary objective is to create actionable tools such as checklists and decision matrices that enable rapid, standardized responses under high-pressure conditions, ensuring consistency and effectiveness across all operational levels. The framework must be intuitive, field-ready, and aligned with real-world emergency management needs, prioritizing clarity and usability over administrative complexity. The contract is issued under NAICS code 541611, indicating a focus on management consulting services related to emergency preparedness and response planning. Proposals are due by August 7, 2026, and the work is expected to be performed in Wyoming, with no specific city designated. This subcontract does not have a set-aside classification, and while no point of contact is listed, interested parties can access additional details through the provided public purchase portal. The deliverables must support immediate adoption by frontline staff, emphasizing structured decision-making, clear action pathways, and scalability across a range of emergency events without requiring advanced training or supervision.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

GIS-Based Protective Action Zone DevelopmentTeton County is seeking a subcontractor to develop a scientifically defensible and operationally usable GIS-based protective action zone system that integrates seamlessly with its existing ArcGIS Online environment. The project requires the creation of a robust spatial decision support tool designed to assist emergency management and public safety personnel in determining appropriate protective actions during hazardous incidents, leveraging geospatial analysis and authoritative data sources. The system must be operational, scalable, and maintainable within Teton County’s current GIS infrastructure, ensuring real-world applicability during emergencies. The contract is classified under NAICS code 541330 and is open for bids with a submission deadline of August 7, 2026. The work must be performed within the jurisdiction of Teton County, Wyoming, and the successful bidder will be expected to collaborate with local officials to align the system with regional response protocols and data standards. While the specific point of contact and financial details are not provided, interested parties are directed to the public procurement portal for additional solicitation materials and submission guidelines.

Engineering Services

POSTED

DEADLINE

Emergency Management Protective Actions Operational Framework, GIS Decision Support, Transportation Analysis, and HSEEP Exercise Services

Solicitation # TCEM RFP FY27 001

Teton County Emergency Management is seeking qualified firms to develop a comprehensive Protective Actions Operational Framework and Decision Support System tailored to Teton County and the Town of Jackson, Wyoming. The project requires a multidisciplinary team to deliver emergency management planning, GIS-based decision support tools, transportation and access analysis, legal review, stakeholder engagement, and HSEEP-compliant exercise design and support. The firm must demonstrate expertise in integrating complex operational data with actionable decision protocols to enhance community resilience during emergencies. The proposal must align with local needs and federal preparedness standards while ensuring coordination across agencies and jurisdictions. The solicitation, identified as TCEM RFP FY27 001, was posted on July 6, 2026, with responses due by August 7, 2026. Proposals are to be submitted in accordance with Teton County’s professional services procurement requirements, and the contract will be awarded based on technical merit, experience, and capability. Rich Ochs of Jackson Hole Fire/EMS serves as the primary point of contact for inquiries. All work is to be performed within Teton County, Wyoming, and the selected vendor will be expected to deliver a fully functional, sustainable system that supports real-time operational decision making during natural disasters, public safety incidents, and other emergencies.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE