This Government Contract opportunity from Department Of Defense was posted on June 29, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

False Bottom Tubes

Awarded

N62645-18-R-0007Federal

Submission Closed06/26/2018, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

Federal

Off-Axis Parabolic Mirrors

Solicitation # FA860127Q0003

The Air Force Life Cycle Management Center, on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify qualified sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are intended for use in the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a 30mm diameter fused-silica substrate with a parabolic focus at 45 degrees, a surface roughness of less than 1nm RMS, and a scratch/dig specification of 20-10. The required protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance, and transportation to Wright-Patterson Air Force Base, Ohio. Key deliverables include the mirrors and comprehensive test data, including certificates of conformance and surface-measurement data. Delivery is required within 98 calendar days after receipt of order, and the equipment must be warranted against defects for two years following receipt. Payment terms are set at 100 percent after delivery, net 30 days from the invoice date. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026.

POSTED

DEADLINE

Flight Model Solar Array Wings

Solicitation # 80NSSC27946791Q

National Aeronautics And Space Administration

POSTED

DEADLINE

ICP-OES for Oil Analysis

Solicitation # W911S227U0057

POSTED

DEADLINE

Laboratory Equipment, Microscope & Accessories (Supply and Install) (Echo Revolve)

Solicitation # 40-27

Solicitation 40-27, issued by the New Hampshire Department of Administrative Services, seeks bids for the supply, delivery, and turn-key installation of an Echo Revolve R4 Upright Microscope and associated accessories for the NH Department of Fish and Game in Concord, New Hampshire. The required equipment is a hybrid fluorescence microscope capable of flipping between upright and inverted modes, featuring a 12.9-inch iPad Pro Retina display. Key deliverables include the microscope system, specific LED light cubes, various objective lenses, an ELWD universal condenser, stage inserts, and a digital haze reduction software module. The successful vendor must complete delivery and installation within 45 business days of the contract award. The contract will be awarded to the responsible vendor who submits a conforming bid meeting all technical specifications at the lowest total cost. Bids are due by October 23, 2026, and must be submitted via email to the Bureau of Purchase and Property. Vendors are required to provide proof of comprehensive general liability insurance of at least 1 million dollars per occurrence and 2 million dollars aggregate, as well as workers compensation insurance. Environmental guidelines encourage the elimination of PVC and polystyrene and the use of SmartWay transport partners. Payment terms are set at 30 days following the receipt of an itemized invoice after the equipment has been delivered, inspected, and accepted by the agency.

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

MFO Teledyne Items G. Curvin 10/19/26

Solicitation # SRC0000037208

Solicitation SRC0000037208 is issued by the Alabama Environmental Management agency for the procurement of a Teledyne API Model N100 SO2 Analyzer. The device must utilize the UV fluorescence principle and adhere to the US EPA Automated Equivalent Method EQSA-0495-100, featuring a lower detectable limit of 0.4 ppb or less and a response time of less than 120 seconds to 95%. Required accessories include a long-life sample filter holder assembly and two rack mount kits. The contract is capped at a total value of 25,000 dollars and may be renewed annually for up to five years. The State of Alabama will evaluate bids based on price reasonableness, cost realism, and supplier qualifications, which may include requests for professional licenses, insurance certificates, and manufacturer reseller authorizations. Suppliers must be registered in Alabama Buys and submit responses electronically. Key compliance requirements include E-Verify enrollment for Alabama-based employees, certification of no boycott activities, and adherence to Alabama state and local tax regulations. Payment is handled electronically via P-cards, EFT, or state-issued credit cards, with price escalations limited to 5 percent of the annual contract cost. The State retains the right to inspect all products after delivery before final acceptance.

ENVIRONMENTAL MANAGEMENT

POSTED

DEADLINE

Supply of Special Scale Meters (NSN 6625-01-541-0598)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Dräger Carbon Dioxide Measuring Tubes

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Gas Analyzer Supplier (NSN 6630016713921)

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

MEASURING TUBE, GAS ANA

Solicitation # SPE2DH-27-T-0214

Solicitation SPE2DH-27-T-0214 is a procurement by the Defense Logistics Agency for the supply of gas analyzer measuring tubes, specifically the Draeger Carbon Dioxide 100/A-P. These round glass tubes with melted tips are designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million per liter of air. The requirement consists of three line items, each for one package containing 10 tubes. Delivery is required within 20 days after the order, with shipments destined for the USS Carl M. Levin, USS William P Lawrence, and USS Thomas Hudner. The contract mandates a non-extendable shelf life of 24 months, with a requirement that no more than 3 months elapse between the date of manufacture and delivery to the government. Packaging must adhere to ASTM D3951 and DLA packaging requirements, while marking must comply with Medical Marking Standard No. 1. Invoicing and payment are processed electronically through the Wide Area WorkFlow system. The procurement is governed by NAICS code 334516 and includes various FAR and DFARS clauses regarding equal opportunity, combatting trafficking in persons, and the Buy American Act. Destination inspection is required per FAR 52.246-2.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0262

Solicitation SPE8E5-27-T-0262 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support for one Grip Spacing Gage, identified by NSN 5220001823779 and part number T101559 from Rotair Aerospace Corp or Bell Textron Inc. The required delivery date is October 20, 2026, with a delivery window of five days after the order. Shipping is FOB Origin and will be delivered to the USA DEP Corpus Christi in Texas. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and MIL-STD-130N, with DLA Master List requirements taking precedence. Palletization must comply with RP001. Invoicing and payment processing are required through the Wide Area WorkFlow system. This procurement is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity requirements for safeguarding covered defense information, and specific representations regarding small business size standards under NAICS code 334516.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE2DH-27-T-0217

Solicitation SPE2DH-27-T-0217 is a request for quotations from the Department of Defense, specifically the Medical Supply Chain FSH, for the procurement of two gas analyzers under NSN 6630-01-671-3921. The required devices must feature an internal pump, a digital LCD display, and the ability for users to select between O2 or air as the carrier gas. These analyzers are designed to measure the concentration percentage of Desflurane, Sevoflurane, Isoflurane, and Halothane. Each unit must be delivered with a sampling tube, a carrying case, and a T-shaped sampling piece. Bidders are required to specify the source and part number being supplied and must provide a complete data package if proposing an alternate part. The contract specifies a delivery period of 88 days with a required delivery date of October 19, 2026, shipped FOB Destination to the USA Medical Materiel Center in Korea. Compliance with Medical Marking Standard No. 1 and MIL-STD-2073-1E for packaging is mandatory, with each unit required to be in a sealed container. The acquisition falls under NAICS code 334516 and incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination point in accordance with FAR 52.246-2.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Portable Non-Nuclear Density Gauge

Texas Department of Transportation

POSTED

1 day ago

DEADLINE

in 13 days

AI Contract Overview

This award notice concerns solicitation N62645-18-R-0007 for the procurement of false bottom tubes issued by the Naval Medical Logistics Command under the Department of Defense. The tubes are specifically required for use with Beckman Coulter AU5800 series clinical chemistry analyzers in support of the DoD Drug Demand Reduction Program. The contract is managed out of Fort Detrick, Maryland, under NAICS code 334516. Amendment 0001 modified the essential characteristics within the Statement of Requirements to adjust the acceptable length of the tubes from 95-100mm to a broader range of 90-100mm, while maintaining a width of 16mm. This amendment also extended the offer submission deadline to February 26, 2018, at 2:00 pm Eastern Time. Primary points of contact for the procurement include Contracting Officers Kathryn L. Brown and Lee J. Ericksen.

General Info

Agency

Department Of Defense → Naval Medical Logistics Command

Contract Value

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

see solicitation, MD, USA

Set-Aside

NONE

Awardee

MG SCIENTIFIC, INC.

Award Issued Date

09/01/2018, 12:00:00 AM UTC

Documents

N62645-18-R-0007 Amendment 0001

amendment

High

Solicitation N6264518R0007 - False Bottom Tubes for DoD DDRP

rfp

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseAwarded

PostedJan 2

Combined Synopsis

Notice updatedFeb 12

Response deadline changed from Feb 2, 2018 to Feb 28, 2018. The notice description changed.

AwardedSep 1

Contract was awarded

Submission Closed

06/26/2018, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Naval Medical Logistics Command

Contacts2 people available

OfficeFORT DETRICK, MD, 21702-9203, USA

Organization / AgencyDepartment Of Defense → Naval Medical Logistics Command

Office AddressFORT DETRICK, MD, 21702-9203, USA

Contacts

Kathryn L. Brown

contact@example.gov

+1 (555) 000-0000

Lee J. EricksenContracting Officer

contact@example.gov

+1 (555) 000-0000

Full Description

Amendment 0001: The purpose of this amendment is to revise the Essential Characteristics in the Statement of Requirements. Paragraph 2.3. of the Statement of Requirements changed From: - 2.3. The dimensions shall be 16mm width and 95-100mm length. To - 2.3. The dimensions shall be 16mm width and 90-100mm length.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS