This Solicitation opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

FAN, TUBEAXIAL

Closed

SPE8E7-26-T-3759Federal

Submission Closed09/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E727T0235

POSTED

DEADLINE

Environmental Control System

Solicitation # 80KSC026Q0013

NASA Kennedy Space Center is soliciting quotes under solicitation number 80KSC026Q0013 for a firm-fixed-price contract to provide a turn-key, weather-rated air compressor enclosure system. The system must be fully fabricated, ready-to-connect, and capable of generating clean, dry air for the Environmental Control System at LC-39B. Key technical requirements include the ability to withstand 168-mph wind loads, operate in temperatures between 21°F and 101°F, and survive a launch-induced environment. The vendor is responsible for the delivery and on-site activation of the hardware, with a desired completion date of February 28, 2027. The procurement emphasizes strict adherence to safety and quality standards, including ASME piping and pressure vessel codes, NFPA electrical standards, and NASA-STD-5008 for coastal preservation coatings. Required deliverables include Factory Acceptance Test Reports, NACE inspection reports for surface coatings, and On-site Activation Test Reports. Award decisions will be based on the most advantageous offer, with price weighted equally against a combination of technical capability and past performance. Offers must be submitted to the designated contract specialist and include all required commercial terms, taxpayer identification, and a signed authorization.

NASA Kennedy Space Center

POSTED

DEADLINE

PWC Pymatuning Buffalo Turbine Cyclone

Solicitation # SRC0000042602

The Ohio Department of Natural Resources is soliciting bids for the procurement of a new Buffalo Turbine Cyclone pull-behind blower for park and watercraft maintenance at Pymatuning State Park. The solicitation includes two optional items: the KB7 and KB23 models. The contract will be awarded to the lowest responsive and responsible bidder based on the low lot total, which is calculated by multiplying the unit cost by the estimated usage for all items. Bidders are encouraged to bid on both models, and the park will select the best fit based on the lowest bid. The requested delivery date for the equipment is October 30, 2026. The procurement process incorporates State of Ohio Standard Terms and Conditions, including specific preferences for Buy American, Buy Ohio, and certified veteran-friendly businesses. These preferences are applied as percentage additions to the total score, provided the product cost exceeds 50 percent of the total offered cost. All proposals must be submitted electronically through the Ohio Buys portal by the deadline of November 4, 2026. Contractual requirements include adherence to F.O.B. Destination shipping terms and compliance with U.S. trade control laws and boycott warranties. Invoicing must be submitted directly to Financial Shared Services, with payments due 30 days after receipt of a proper invoice. The contractor is responsible for all insurance and workers' compensation and must ensure that any subcontracts are approved in writing by the State. Additionally, the contractor must comply with data security and privacy terms, including the requirement that data at rest reside within the contiguous United States.

Dnr353417 Pymatuning State Park Dnrast

POSTED

DEADLINE

41--FAN,VANEAXIAL, IN REPAIR/MODIFICATION OF

Solicitation # N0010424RJC57

This firm-fixed-price solicitation from the Navsup Weapon Systems Support Mech is for the teardown, evaluation, repair, and modification of Vane Axial Fans. The government is seeking a Repair Turnaround Time of 177 days, with a requirement for Government Source Inspection and adherence to MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. A critical technical requirement specifies that repairs are not permitted on fan rotors per Navy specification MIL-F-18953A; therefore, any damaged rotor must be replaced with a new rotor assembly. The contract has undergone several amendments, most recently reducing the quantity from seven to three units and extending the offer due date to July 6, 2026. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer. The contractor is subject to price reductions for any unexcusable delays in meeting the required turnaround time. Payment will be processed electronically via the Wide Area Workflow system, and all freight is handled as FOB Origin.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Commercial Gas-Fired Boiler SupplierThis subcontract for the County of Union in North Carolina requires the supply of two condensing gas-fired domestic-water heaters for facility projects. The scope of work includes providing one 500,000 MBH kitchen boiler and one 1,100,000 MBH shower boiler, featuring 100-gallon storage and a thermal efficiency rating of 94 percent. All delivered equipment must be certified, tested, and labeled to ensure compliance with ASME Boiler and Pressure Vessel Code Section VIII Division 1, ASHRAE/IES 90.1, and NSF 61/372 standards. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

POSTED

DEADLINE

High-velocity floor fans

Solicitation # W0107-275644

The Department of National Defence, specifically the Personnel Support Programs Fitness and Sports Department for Garrison Petawawa, is soliciting offers for the procurement of ten industrial, portable, high-velocity floor fans. The requirement consists of six Type I fans with diameters between 6 and 7 feet and four Type II fans with diameters between 8 and 9 feet. All units must be pre-assembled, OSHA-compliant, and meet CSA and Canada Electrical Code requirements. Technical specifications mandate a minimum air velocity of 200 fpm covering a distance of 80 to 100 feet, with a maximum noise level of 75 dBA. The successful contractor is responsible for the delivery, unloading, unpacking, and placement of the fans at the Dundonald Hall Fitness, Sports and Aquatic Centre in Petawawa, Ontario, under DDP Incoterms 2020. The contract period runs from the date of award until March 31, 2027, which also serves as the final delivery deadline. This solicitation is open only to Canadian Suppliers and Suppliers of an Applicable Trading Partner. Award will be granted to the compliant offer with the lowest evaluated price, with a 10 percent price reduction applied for evaluation purposes to compliant offers from Canadian Suppliers who submit the required Canadian Content Attestation Form. Proposals must be submitted electronically and divided into technical, financial, and declaration sections. Packaging must be protective and environmentally friendly, utilizing reusable, returnable, or recyclable materials whenever possible.

Department of National Defence

POSTED

DEADLINE

FAN, VANEAXIAL — 4140015981257 — N0010427QBA91

Solicitation # N0010427QBA91

Solicitation N0010427QBA91 is a fixed-price contract issued by the NAVSUP Weapon Systems Support Mech for the procurement of a Vaneaxial Fan, identified by NIIN 015981257. The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations based on technical compliance, price, and supplier risk as assessed via the Supplier Performance Risk System. The contractor is required to adhere to Technical Data Package Version 004 and must maintain an inspection system acceptable to the government, with both inspection and acceptance occurring at the contractor's plant. Key deliverables include the fan and a Certificate of Compliance per DI-MISC-81356, submitted at the time of material delivery. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1 for system stock and MIL-PRF-23199 for cleanliness controls, while prohibiting the intentional addition of mercury. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with safeguarding protocols for Naval Nuclear Propulsion Information and covered defense information. All shipments are FOB Destination with transportation costs prepaid.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

HVAC Equipment SupplyThis subcontract for HVAC Equipment Supply involves providing specialized hardware and components to prime contractors for Oregon Department of Transportation facility projects based in Portland. The scope of supply includes air handling units, boilers, chillers, decentralized units, sensors, transmitters, and control valves. The supplier is required to provide all necessary equipment and technical performance data sheets to ensure project compliance. A critical requirement of the agreement is that all supplied products must be current manufacturing models. Additionally, the supplier must guarantee the availability of spare parts for a period of five years following delivery. The solicitation was posted on October 19, 2026, with a response deadline of November 4, 2026.

POSTED

DEADLINE

BLOWER UNIT, AIR FILTER

Solicitation # SPE8E5-27-Q-0031

Solicitation SPE8E5-27-Q-0031 is a firm fixed price contract issued by the DLA Troop Support Construction and Equipment office for the procurement of 53,000 blower units for air filtering respirators, identified by NSN 4240-01-655-6330. The award will be based on the best value offer determined by the total award price, including both production and First Article Test (FAT) costs. Delivery is scheduled for 240 days after award for the primary units, with a separate 100-day delivery window for specific line items. Inspection and acceptance are conducted at the origin, with the final delivery destination being the DLA Distribution facility in New Cumberland, Pennsylvania. This procurement is designated as Chemical Biological Defense Equipment and carries stringent quality and security requirements. Contractors must adhere to CMMC Level 2 certification and safeguard covered defense information. Technical compliance is governed by specific reference drawings and Quality Assurance Provisions, with a strict prohibition on the use of class I ozone depleting chemicals. The contract requires rigorous testing, including First Article Testing and Production Lot Testing, and mandates military packaging and marking in accordance with MIL-STD-2073-1 and MIL-STD-129. Additionally, the contract incorporates Buy American and Balance of Payments Program regulations and requires the use of the Wide Area WorkFlow system for all electronic invoicing and payment requests.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E7-26-T-4032

Solicitation SPE8E7-26-T-4032 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment for the procurement of one vaneaxial fan, identified by NSN 4140-01-623-1906. This procurement is designated as a total small business set-aside under NAICS code 333413. The required delivery date is September 8, 2025, with a delivery timeframe of five days after order. Shipping is FOB Origin, with both inspection and acceptance occurring at the destination, specifically the SWRMC MAC-MO facility in National City, California. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Specific compliance is required for palletization under RP001 and documentation for source approval requests under RC001. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Additionally, the contract incorporates various federal and defense acquisition regulations, including Buy American Act compliance, cybersecurity safeguarding under DFARS 252.204-7012, and hazardous material labeling standards.

Defense Logistics Agency

POSTED

DEADLINE

FAN ASSEMBLY, CENTRIFUG

Solicitation # SPE8E7-27-T-0111

Solicitation SPE8E7-27-T-0111 is a total small business set-aside issued by DLA Troop Support, Construction and Equipment for the procurement of one centrifugal fan assembly, part number XP55722400015 (72582), NSN 4140124075914. The requirement is categorized under NAICS code 333413. Delivery is specified as FOB Origin with a need ship date of March 28, 2027, and an original required delivery date of November 19, 2027. The item is to be delivered to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 requirements. Compliance with the Buy American Act, the Berry Amendment, and various DFARS regulations regarding covered defense information and export-controlled items is required. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

Solicitation # SPE8E7-27-T-0122

Solicitation SPE8E7-27-T-0122 is a fixed-price contract issued by DLA Troop Support, Construction and Equipment for the procurement of seven tubeaxial fans, NSN 4140-00-289-8826. These critical application items must operate at 115 volts AC, 60 Hz, single phase, and comply with MIL-PRF-18953. A Qualified Products List applies, requiring the manufacturer to be QPL approved at the time of contract award. Technical requirements are further governed by TDP Rev A Gen 1 and reference drawing 75477 FF16085 Revision E. The contract specifies a delivery timeframe of 195 days, with a need ship date of May 3, 2027, and a required delivery date of August 27, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-F-18953 and MIL-STD-2073-1E, with marking per MIL-STD-129 and palletization per RP001, while avoiding plastics for wrapping or cushioning where possible. Administrative requirements include the use of Wide Area WorkFlow for invoicing and receiving reports. Offerors must be registered in the System for Award Management and comply with NAICS code 333413. The contract incorporates several federal regulations, including FAR 52.246-1 for destination inspection, DFARS 252.204-7012 for safeguarding covered defense information, and various domestic material restrictions such as the Buy American Act and the Berry Amendment. Additionally, the use of additive manufacturing for these parts is prohibited unless specifically authorized.

DLA DIST SAN JOAQUIN

POSTED

2 days ago

DEADLINE

in about 13 hours

AI Contract Overview

Solicitation SPE8E7-26-T-3759 is a request for quotations issued by the Defense Logistics Agency for the procurement of 40 tubeaxial fans, identified by NSN 4140-01-388-8879. The requirement specifies part numbers 10323-1016 from L3Harris Technologies or 10323-1016REV.E from Avnet, Inc. The original required delivery date is February 17, 2027, with a need ship date of March 1, 2027. Delivery is set for FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Both inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951, MIL-STD-129, and DLA packaging requirement RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those related to the Buy American Act, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. Offerors must submit quotes via DIBBS, and additive manufacturing is prohibited unless specifically authorized.

General Info

DOD procurement of 40 tubeaxial fans for DLA New Cumberland by March 2027.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

SPE8E7-26-T-3759 Request for Quotations

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 2

Solicitation

Response DeadlineSep 14

Deadline has passed

Submission Closed

09/14/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressUSA

Contacts

Kelly Mitchell

contact@example.gov

+1 (555) 000-0000

Full Description

FAN,TUBEAXIAL
FAN,TUBEAXIAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
L3HARRIS TECHNOLOGIES, INC. 14304 P/N 10323-1016
AVNET, INC. 9A810 P/N 10323-1016REV.E
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018161227 0001 EA 40.000
NSN/MATERIAL:4140013888879
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE8E7-26-T-3759
SECTION B
PR: 7018161227 PRLI: 0001 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/01/2027 Original Required Delivery Date:02/17/2027
SPE8E7-26-T-3759 NSN/Part Number: 4140-01-388-8879 Quantity: 40 EA Purchase Request: 7018161227QTY: 40 Delivery: 167 days ADO