Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FAN, VANEAXIAL

Active
SPE7M2-26-Q-0669Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 33 vane axial fans identified by NSN 4140-01-693-5792 and part numbers 940-65746-1 and 2285010, furnished under solicitation SPE7M2-26-Q-0669. The items are classified as critical application components and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. Manufacturing and delivery must adhere to MIL-STD-2073-1E packaging standards, including prescribed methods for preservation, wrapping, cushioning, and unit containment, with marking following MIL-STD-129 and no special marking codes. The contract prohibits intentional introduction of mercury or mercury-containing compounds into the hardware except for functional uses in batteries, fluorescent lamps, specified instruments, sensors, controls, weapon systems, and chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Delivery is to occur at the DLA Distribution facility in New Cumberland, Pennsylvania, with an FOB origin term and a delivery deadline of 364 days after award. Inspection and acceptance occur at destination, and all units must be palletized per DLA packaging requirements. The contract includes strict compliance with defense information handling rules under RD003, and the unit of issue is EA with no variance allowed in quantity. The purchase request number is 7010227509, and the material is needed by March 20, 2026.

General Info

33 vane axial fans, NSN 4140-01-693-5792, delivered to New Cumberland by March 20, 2026, per MIL-STD and DLA requirements.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7M2-26-Q-0669

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
Kevin Erickson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FAN ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SETFORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THEWEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER INEFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST(SAR)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLYAPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)>ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS,REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENTLAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURYOR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
L3HARRIS MARITIME POWER & ENERGY 04801 P/N940-65746-1
Rotron 82877 P/N 2285010
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 16236 RE-016935792 REVISION NR A DTD06/01/2026 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 4140-01-693-5792 33.000 EA $ _______________ $ _______________
FAN,VANEAXIAL
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7M2-26-Q-0669
SECTION B
SUPPLY/SERVICE: 4140-01-693-5792 CONT'D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 364 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNNTHKNESS:C
UNIT CONT:EC OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No specialmarking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7010227509 0001 N/A N/A N/A 03/20/2026

SPE7M2-26-Q-0669 NSN/Part Number: 4140-01-693-5792 Quantity: 33 EA Purchase Request: 7010227509QTY: 33 Delivery: 364 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333413
New
DIBBS
Supply and Delivery of Centrifugal Fans (NSN 4140011744368)The contract requires the procure, package, label, and deliver eleven centrifugal fans meeting military packaging, labeling, and cybersecurity standards to Tracy, CA, with full delivery mandated within 167 days of award. The equipment is identified by NSN 4140011744368 and must comply with all applicable Department of Defense specifications for handling, documentation, and cyber protection to ensure operational readiness and security. The place of performance is strictly designated as Tracy, CA, with the zip code 95304-5000, and the contracting office is DLA Dist San Joaquin under the Department of Defense. The solicitation is classified as a subcontract under NAICS code 333413, with a response deadline of August 3, 2026, and the opportunity was posted on July 22, 2026. All deliverables must be fully compliant with military regulatory frameworks, and failure to meet packaging, labeling, or cybersecurity requirements could result in rejection of the shipment.
DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
Electrostatic Air Filter SupplyThe contract calls for the supply of six units of electrostatic air filters with NSN 4460016425833 and part number 21024-214, requiring full compliance with DLA technical specifications for defense applications. The items are intended for use within Department of Defense operations and must meet rigorous performance and quality standards established for military environments. The solicitation is classified as a subcontract under NAICS code 333413, which pertains to HVAC equipment manufacturing, and the place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The opportunity was posted on July 22, 2026, with a firm response deadline of August 3, 2026, and is accessible via the DIBBS website for qualified contractors. All submissions must align with the technical and logistical requirements specified by the agency, Construction & Equipment MRO SVC I, to ensure compatibility with defense maintenance and operational systems.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
Supply of Tube Axial Fan (NSN 4140017003000)The contract mandates the manufacture and delivery of 10,000 units of a tube axial fan meeting stringent military specifications, ensuring full compliance with technical, packaging, and labeling requirements aligned with NSN 4140017003000. All units must be produced to exact standards suitable for defense applications, with quality control measures embedded throughout the production and inspection process to guarantee reliability under operational conditions. The procurement is classified as a subcontract under NAICS code 333413, indicating it falls within the ventilation and HVAC equipment manufacturing sector. Performance is required to be delivered to Tracy, California, with a zip code of 95304-5000, and all activities are governed by Department of Defense oversight through DLA Dist San Joaquin. The solicitation was posted on July 22, 2026, with a firm deadline of August 3, 2026, for responses, leaving a narrow window for qualified suppliers to submit proposals. While no set-aside designation is specified, the contract is accessible to eligible subcontractors capable of fulfilling the technical and logistical demands of military-grade equipment production and timely delivery.
DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
Supply of Air Purification Units (Commercial Off-the-Shelf)The contract involves the procurement and delivery of eight air purification units compliant with National Stock Number 4460014606553, specifically designed for military use with full adherence to military packaging, labeling, and hazardous materials regulations. These units are classified as commercial off-the-shelf products and must meet all technical and logistical standards required by the Department of Defense for deployment in operational environments. The performance location is specified as New Cumberland, Pennsylvania, with a delivery timeframe tied to the submission deadline of August 3, 2026. The procurement is issued under a subcontract arrangement by the DDP New Cumberland Facility and falls under the NAICS code 333413, indicating the manufacturing of industrial and commercial HVAC and commercial equipment. The supplier must ensure full compliance with federal standards regarding hazardous materials handling, documentation, and serialization to support inventory tracking and field readiness.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
Manufacture of Tube Axial Fans to MIL-PRF-18953C SpecificationThe contract requires the manufacture and supply of four tube axial fans that strictly comply with the MIL-PRF-18953C specification, including adherence to TDP Revision A Generation 1 and drawing 75477 FF16085 Rev E, with all units must be listed on QPL-18953-30 Rev 30 to ensure qualification. The fans must be electrically rated for 115V AC, 60 Hz, single phase operation and must meet all performance, testing, and documentation requirements defined by the military specification. Production must be executed under the Quality Assurance program specified in the referenced documents, and suppliers must demonstrate compliance through applicable certifications and inspection protocols prior to delivery. The solicitation is issued as a subcontract under the Department of Defense, specifically for the DDSP NEW CUMBERLAND FACILITY, with performance location set at NEW CUMBERLAND, PA 17070-5002. The North American Industry Classification System code is 333413, indicating the work falls within the Ventilation, Heating, Air-Conditioning, and Commercial Refrigeration Equipment Manufacturing sector. The opportunity was posted on July 22, 2026, with proposals due by August 3, 2026, and all interested parties must submit responses through the DIBBS platform using the specified solicitation number SPE8E726T3373. Participation is restricted to qualified manufacturers capable of delivering fully compliant, QPL-listed fan units meeting all technical and procedural requirements under the military standard.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
Electrostatic Air Filter Supply and DeliveryThe contract is for the manufacture, procurement, and delivery of electrostatic air filters designated by NSN 4460012556686, with strict adherence to military packaging, labeling, and hazardous materials handling requirements. All items must meet defined defense standards to ensure compatibility, safety, and operational readiness within military applications. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the Small Business Administration, with the NAICS code 333413 indicating the industry classification for air and gas compressing and ventilating equipment manufacturing. The opportunity was posted on July 22, 2026, with a mandatory response deadline of August 3, 2026. Performance of the contract is to be executed at the designated location in San Diego, California, with a specific zip code provided for delivery purposes. The awarding agency is the Department of Defense, under the San Diego organizational unit, and the contract can be accessed through the DIBBS system using the provided link. No point of contact information is listed, and all inquiries or submissions must comply with the submission procedures outlined in the official solicitation document available on the DIBBS portal.
SAN DIEGO

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
Manufacture of Sound Mat Fan AssemblyThe contract calls for the manufacture and delivery of 26 units of a Sound Mat Fan Assembly, part number 1389402 FF12983, specifically designed for the Super Quiet Joy Model AVR 190-150D2423. All units must fully comply with Defense Logistics Agency technical specifications and source approval requirements to ensure operational suitability and quality assurance. The work is to be performed under a subcontract arrangement, with a response deadline of August 3, 2026, and the contract was posted on July 22, 2026. The North American Industry Classification System code 333413 applies, indicating the nature of the work relates to other commercial and service industry machinery manufacturing. The place of performance is set at New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting organization is the Department of Defense under the Construction & Equipment MRO SVC I agency, with no set-asides specified for small or minority businesses.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
COLLECTOR, DUSTThe contract pertains to the procurement of a DUST COLLECTOR under solicitation SPE8E8-26-T-4793, with a unit of issue of each (EA) and a total quantity of 18 units. The item is identified by NSN 4460-01-423-6533 and has a unit price of $18.00, resulting in a total price of $324. Delivery is required within 167 days from the contract award, with delivery terms set to FOB origin. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, and marked according to MIL-STD-129 with no special marking required. Palletization must adhere to DLA’s packaging requirements, and the final destination is the DDSP New Cumberland Facility in Pennsylvania. The contract enforces stringent material restrictions, prohibiting the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The procurement is governed by technical and quality standards referenced from the DLA Master List, with revisions determined based on solicitation and award timelines. Inspection and acceptance occur at the destination. The delivery deadline is January 18, 2027, originally required for September 8, 2026. All transportation logistics are directed per DLAD Proc Notes C19 and C20, and point of contact for inquiries is Alexis Selby at the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
FILTER AND BLOWER AThe contract pertains to the procurement of a Filter and Blower Assembly identified by NSN 4140-01-190-9410 and part number 803-5476176, with a total quantity of four units to be delivered under solicitation SPE8E9-26-T-3241. Delivery is required within 125 days from the contract award date, with FOB origin terms and inspection and acceptance occurring at the destination. The product must comply with stringent packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific preservative methods, containment codes, and marking requirements, while avoiding plastic materials where feasible. The shipment must be palletized according to DLA Packaging Requirements and addressed to the DLA Distribution facility in New Cumberland, PA. The contract enforces strict compliance with federal cybersecurity standards, requiring CMMC Level 2 self-assessment adherence, and prohibits the intentional use of mercury or mercury-containing compounds in the supplied hardware, except for specific exceptions such as batteries, lighting, or defense systems as outlined by NAVSEA, with additional containment and safety measures mandated for portable devices. Environmental and material controls extend to the prohibition of ozone-depleting substances and incorporation of all technical and quality requirements from the DLA Master List. The unit of issue is each, with a unit price of $4.00 and a total contract value of $16.00. The procurement is governed by federal acquisition regulations, with the original required delivery date set for March 16, 2027, though the need ship date is December 7, 2026, and all logistical details are aligned with DLA transportation and shipping protocols.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROSTATThe contract specifies the procurement of four electrostatic air filters identified by NSN 4460012556686 and part numbers 421475-017 and 428900 from AIR SYSTEMS COMPONENTS INC, with a total quantity of four units to be delivered under solicitation SPE8E8-26-T-4787. Delivery is required within 167 days of contract award, with shipment to be FOB origin and acceptance at the destination, subject to strict adherence to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The filters must not contain mercury or mercury-containing compounds except in specified exemptions such as batteries, fluorescent lights, instrument sensors, weapon systems, or chemical reagents authorized by NAVSEA, and any portable fluorescent lamps or instruments containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. The contract is a total small business set-aside under NAICS code 333413 with a response deadline of August 3, 2026, and includes a zero percent variance on quantity, with no special marking required beyond standard compliance. All supplies must comply with DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, and must be delivered to the designated DLA Distribution San Diego facility at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The original required delivery date is January 30, 2027, with a need ship date of January 18, 2027, and transportation instructions follow DLAD Proc Note C19 and C20.
SAN DIEGO

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
PURIFIER UNIT, AIRThe contract is for the procurement of eight air purifier units, identified by NSN 4460-01-460-6553 and part number 080143 from BAUER COMPRESSORS, INC., under solicitation SPE8E8-26-T-4794. Delivery is required within 151 days of contract award, with shipment originating FOB origin and no tolerance for quantity variance. The units must comply with strict packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping materials, and unit container specifications, and must be palletized according to DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited unless part of exempted functional components like batteries or instruments, and any such exempted items must include a secondary containment as specified by NAVSEA 5100-003D. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation issue date. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with a required ship date of January 2, 2027, although the original delivery deadline is September 30, 2026. Inspection and acceptance occur at the destination point, and special marking is not required. Transportation and freight shipping instructions align with DLA Procurement Notes C19 and C20. The contract falls under NAICS code 333413 and is managed by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Alexis Selby. All supplies must be free of government identification upon rejection and meet the full scope of defense acquisition regulations regarding controlled information, as this is designated as a critical application item.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROSTATThis contract specifies the procurement of an electrostatic air filter with NSN 4460013113732 and part number 441076-001, supplied by AIR SYSTEMS COMPONENTS INC, under solicitation SPE8E9-26-T-3219. Six units are required at a unit price of $6.00, with total contract value of $36.00, delivered FOB origin within 167 days from the contract date. All deliveries must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking applicable. Packaging must adhere to DLA’s procurement guidelines and be palletized per RP001, with shipments directed to DLA Distribution Jacksonville at the specified address. The filter is designated as a critical application item and must not contain or come into direct contact with mercury or mercury-containing compounds, except for authorized exceptions such as functional mercury in batteries, fluorescent lamps, sensors, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 333413, with responses due by August 3, 2026, and quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RQ and RD identifiers. Inspection and acceptance occur at the destination, with zero variance permitted in quantity, and transportation protocols follow DLAD Proc Notes C19 and C20.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 484230
New
DIBBS
Freight and Delivery LogisticsThe contract requires the transportation of 33 fan assemblies from the origin point to DLA Distribution in New Cumberland, Pennsylvania, under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. The delivery must be completed within a 364-day acceptance date window, allowing flexibility in scheduling while ensuring timely fulfillment. The work is classified as a subcontract under NAICS code 484230, which pertains to freight transportation by truck. The solicitation was posted by the Nuclear Reactor Program under the Department of Defense, with a response deadline of July 28, 2026, indicating a six-day window for interested parties to submit proposals. The place of performance is clearly identified with the zip code 17070-5002, but specific origin details and contact information are not provided in the available data.
Specialized Freight (except Used Goods) Trucking, Long-Distance

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541330
New
DIBBS
Product Verification Testing (PVT) and Quality AssuranceThe contract requires independent product verification testing on fan assemblies to confirm compliance with established technical specifications, with the ultimate goal of producing government-acceptable PVT reports that meet formal certification standards. The work is part of a subcontract under the Nuclear Reactor Program within the Department of Defense, and all testing must be conducted to support the agency’s quality assurance protocols for critical components used in nuclear applications. The place of performance is specified as New Cumberland, PA, with a zip code of 17070-5002, indicating that physical testing and reporting activities will occur at or near this location to ensure logistical and regulatory alignment. The solicitation was posted on July 22, 2026, with a response deadline of July 28, 2026, creating a narrow six-day window for potential subcontractors to submit proposals. This contract falls under NAICS code 541330, which classifies it as engineering services, reinforcing that the work demands technical expertise in measurement, validation, and documentation of product performance. There is no set-aside designation or specific organizational type required, leaving the opportunity open to qualified vendors capable of delivering accurate, government-compliant verification reports. All deliverables must adhere to the stringent documentation and certification standards expected by the Department of Defense for nuclear-related infrastructure.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and PalletizationThe contract requires the provision of packaging, preservation, and palletization services for fan assemblies in full compliance with MIL-STD-2073-1E and RP001 standards, ensuring military-grade protection and handling throughout the supply chain. All materials, container types, and methods must adhere strictly to these specifications to maintain operational readiness and environmental resilience during transit and storage. The work must be performed with precision to meet defense logistics requirements, including proper labeling, moisture barrier systems, corrosion inhibition, and secure pallet configurations that support handling by military logistics equipment. This subcontract is issued under the NAICS code 561910 and is tied to the Nuclear Reactor Program under the Department of Defense, with performance required at the specified location in New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on July 22, 2026, and responses are due by July 28, 2026, indicating a tightly managed procurement timeline. Contractors must demonstrate proven capability in military packaging standards and be prepared to undergo full compliance verification, as failure to meet specifications could result in rejection of delivered units and potential contract breach. All work must be executed with zero tolerance for deviation from the referenced military standards.
Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333414
New
DIBBS
Vaneaxial Fan Assembly SupplyThe contract requires the supply and delivery of 33 vaneaxial fan assemblies that must fully comply with military specifications, encompassing both manufacturing and sourcing activities to meet rigorous technical standards. These assemblies are intended for use in critical applications under the Nuclear Reactor Program, ensuring operational reliability and performance under demanding conditions. All components and processes must adhere to applicable defense and industry requirements, with strict quality control measures in place to guarantee conformity. Delivery must be completed to the designated location at DLA New Cumberland, zip code 17070-5002, with no flexibility in the final destination. The contract is structured as a subcontract and falls under NAICS code 333414, which categorizes it within the commercial and industrial machinery manufacturing sector. The solicitation has a tight turnaround with a response deadline of July 28, 2026, and was posted on July 22, 2026, indicating an urgent procurement timeline. The Department of Defense, through its Nuclear Reactor Program, is the executing agency, emphasizing the mission-critical nature of the equipment and the necessity for timely, defect-free delivery.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423620
New
DIBBS
Supply of Electronic Components (Trusted Source)The contract requires the supply of electronic subcomponents sourced exclusively from trusted, government-approved vendors with full original equipment manufacturer traceability, ensuring strict adherence to DFARS regulations that prohibit counterfeit parts and restrict purchases from banned suppliers. All components must meet rigorous compliance standards to safeguard the integrity of defense-related systems under the Nuclear Reactor Program, with performance obligations centered in San Diego, California, at the specified ZIP code. The solicitation is categorized as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the Department of Defense’s commitment to fostering small business participation in critical supply chains. The NAICS code 423620 aligns with the distribution of electronic components, and the response deadline is set for July 30, 2026, following a posting date of July 22, 2026, with all submissions managed through the DIBBS platform.
Household Appliances, Electric Housewares, and Consumer Electronics Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
DIBBS
Technical Documentation and Data Package ManagementThis contract involves the preparation and management of technical documentation and data packages for defense-related projects, with a specific focus on CDRL deliverables such as Production Test Reports, CoQC documents, and Lot Test Reports. All documentation must strictly adhere to the Technical Data Package, current drawing revisions, and established defense documentation standards to ensure regulatory compliance and operational integrity. The work is critical to supporting the nuclear reactor program under the Department of Defense and requires precision in data generation, formatting, and submission to meet military and contractual requirements. The solicitation is structured as a small business set-aside under the SBA Total Small Business Set-Aside classification, with a NAICS code of 541611 for scientific and technical consulting services. Proposals are due by July 30, 2026, and the performance location is in San Diego, California, with a zip code of 92136-3581. Although no point of contact is listed, the contract is issued through the Defense Logistics Agency’s DIBBS platform, indicating it is a subcontract opportunity managed within the broader defense supply chain and must be executed in alignment with federal procurement guidelines and defense-specific documentation protocols.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Testing Services (PTI & COQC)The contract requires the performance of Production Test and Inspection activities and the preparation of a Certificate of Quality Compliance for items associated with the Nuclear Reactor Program under the Department of Defense. Scope of work includes comprehensive functional testing, visual inspection, and the submission of detailed reports as required by the Contract Data Requirements List. All testing and inspection activities must be conducted to ensure full compliance with quality standards and regulatory specifications, with final documentation culminating in the issuance of a formally approved Certificate of Quality Compliance. This is a small business set-aside subcontract under NAICS code 541380, open exclusively to small business concerns as defined by the SBA. The solicitation was posted on July 22, 2026, with responses due by July 30, 2026, and performance is to be carried out at a designated location in San Diego, California, with zip code 92136-3581. The contract is managed through the DLA DIBBS system under solicitation number SPE7M226Q0667, and all work must align with federal acquisition requirements while ensuring technical and procedural adherence to nuclear program quality protocols.
Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Manufacturing of Sensitive Switch ComponentsThe contract requires precision machining, assembly, and serialization of critical application item switches for Aircraft Launch and Recovery Equipment, with strict adherence to full lot and serial traceability standards. All components must comply with MIL-STD-129 marking requirements to ensure accurate identification and logistics tracking throughout the supply chain. The work is designated as a total small business set-aside under SBA guidelines, exclusively available to small businesses as defined by FAR 19.5, and falls under NAICS code 332722 for machine shop services. Performance is mandated to occur at a designated location in San Diego, California, with a response deadline of July 30, 2026, and the solicitation was posted on July 22, 2026. The contract is issued as a subcontract under the Department of Defense's Nuclear Reactor Program, emphasizing the sensitive and mission-critical nature of the items being produced.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLICThis contract is for the procurement of nonmetallic hose with NSN 4720-00-166-5892, subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The hose must conform to MIL-DTL-24136/1B and MIL-DTL-24136C(1) specifications, and is classified as a critical application item with a Type I (Code W) shelf life of 120 months, which is non-extendable. The product is on the Qualified Products List, requiring compliance with all qualified manufacturer and product criteria. Mercury and mercury-containing compounds are strictly prohibited in the hose, its preservation, packaging, and marking, except for functional uses in specific exempted items like batteries or sensors as defined by NAVSEA, and portable devices containing mercury must include a secondary containment barrier as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating the Type I shelf life, and palletization must follow DLA packaging requirements. The contract authorizes a 10% variance in quantity, with inspection and acceptance occurring at the destination. Two delivery lines are specified: 73 feet to Tracy, CA, with a need ship date of September 11, 2027, and 101 feet to New Cumberland, PA, with a need ship date of July 27, 2027, both under a 357-day delivery window from the contract date. The unit of issue is feet, with a total quantity of 174 feet, and all shipments are FOB origin. The procurement is managed under solicitation SPE7M2-26-T-5703 by the Department of Defense’s Nuclear Reactor Program, with designated point of contact for inquiries.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TEE, PIPEThe contract specifies the procurement of a copper alloy socket type tee with a nominal pipe size of 1 inch, manufactured using a metal casting process that requires specialized tooling. The item is identified by NSN 4730-00-542-5250, with a quantity of 385 units, and must be delivered within 100 days after award. The acquisition is structured as a total small business set-aside, and full and open competition applies. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. Packaging, configuration change management, and removal of government identification from non-accepted supplies are subject to specific mandates outlined in referenced clauses. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or naval chemical reagents. Portable devices containing mercury must be shock-proof and feature a secondary containment boundary in compliance with NAVSEA 5100-003D. Suppliers are required to furnish a Certificate of Quality Compliance for each manufacturing lot, with one physical copy delivered and an electronic version uploaded to the iRAPT system. For government-inspected contracts, the certificate must be available for review during acceptance. All data and documentation mandated under this contract are included in the price of the item, and the point of contact for inquiries is Alla Yakover with the Department of Defense’s Nuclear Reactor Program, performable at New Cumberland, Pennsylvania.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332919
New
DIBBS
VALVE, STOP-CHECKThe contract specifies the procurement of a stop-check valve for water tank applications under NSN 4820-00-863-5592, with a total quantity of 373 units divided into two lots of 7 and 366 units respectively. The item must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, incorporating specific drawings and revisions including 7039063, 7039414, and others, all tied to reference drawing number 19207. Manufacturing requires a metal casting process with custom tooling, and no casting drawings or patterns are available; sourcing and tooling inquiries must be directed to designated DLA supply chain teams. The valve is designated a critical application item and must meet strict material and process controls including lead-free solder per ASTM B-32 for brazing, with visual inspection permitted in lieu of radiographic inspection of braze joints. Ozone-depleting chemicals and intentional mercury exposure are strictly prohibited unless specifically exempted for functional components like batteries or instruments, which must include secondary containment. The item must be inspected and accepted at the destination, with zero non-conformances required per sampling standards MIL-STD-1916 or ASQ H1331, unless otherwise specified. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 marking requirements, with palletization per DLA packaging guidelines. Delivery is due within 100 days of award, FOB origin, with specified shipping addresses in Barstow, CA and New Cumberland, PA. The solicitation is a total small business set-aside with a response deadline in July 2026 and a required delivery completion date of May 31, 2027.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELECTRThis contract specifies the procurement of electrical insulation tape meeting strict technical and packaging requirements, where each roll is 180 feet in length with a nominal width of 0.750 inches and thickness of 0.0070 inches, totaling five rolls for delivery. The tape is white, categorized as a commercial item with a shelf life code of 5, granting an 18-month extendable lifespan, and is designated as a critical application item requiring compliance with Technical Data Package Revision A, General 1, per specification A-A-59770A and MIL-STD-129R. The product must not contain or come into direct contact with mercury or mercury compounds except under specific exceptions for functional uses like batteries or sensors as defined by NAVSEA, and portable devices containing mercury must have shockproof construction with a secondary containment barrier. Packaging must adhere to MIL-STD-2073-1E and DLA packaging mandates, with marking strictly following MIL-STD-129, including special code 33 for shelf-life labeling. Palletization and unit of issue follow DLA standards with the roll as the unit, and delivery is required FOB origin within 20 days to Moody AFB, 31699-1700, with no variance allowed in quantity. The contract is managed under solicitation SPE7M2-26-T-5704, issued by the Department of Defense’s Nuclear Reactor Program, with procurement controlled by the DLA Master List of Technical and Quality Requirements effective as of the solicitation issue date.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details