FAUCET, DOUBLE

FAUCET,DOUBLE
FAUCET, DOUBLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
END ITEM: CAST IRON ENAMEL SERVICE SINK. ITEM CHARACTERISTICS DATA:
BODY MATERIAL BRASS MOUNTING TYPE VERTICAL SURFACE BODY SURFACE
TREATMENT CHROMIUM PLATED HANDLE TYPE LEVER HANDLE MATERIAL BRASS
HANDLE SURFACE TREATMENT CHROMIUM PLATED SURFACE FINISH ROUGH
SEAT DESIGN COMPRESSION COMPRESSION SEAT TYPE RENEWABLE SUPPLY
CONNECTION TYPE FEMALE THREAD SUPPLY CONNECTION THREAD SIZE AND
SERIES/TYPE DESIGNATOR 1/2IN.-14 NPT CENTER TO CENTER DISTANCE
BETWEEN HOT/COLD SUPPLY CONNECTIONS 8.000 INCHES NOMINAL HANDLE
SURFACE FINISH POLISHED SWING SPOUT PROVIDED SPOUT HOSE CONNECTION
PROVIDED SPOUT HOSE CONNECTION TYPE THREADED
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
IAW BASIC NON GOVT STD ASME A112.18.1-2005
REVISION NR DTD
PART PIECE NUMBER: A112.18.1M-1-D2C4A4D5B1
SPE8E8-26-T-4065
SECTION B
IAW REFERENCE NON GOVT STD ASME A112.18.1 UPD 1-2006
REVISION NR 1 DTD 11/01/2006
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016966865 0001 EA 10.000
NSN/MATERIAL:4510001388212
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V23148
USS JAMES E WILLIAMS DDG 95
UNIT 100323 BOX 1
FPO AE 09575
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V23148
USS JAMES E WILLIAMS DDG 95
DLA VENDORS: USE VSM FOR
US
SPE8E8-26-T-4065
SECTION B
PR: 7016966865 PRLI: 0001 CONT’D
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V231483244ER42
RDD:
PROJ: EP5 TP 2
SUPP ADD: YNER01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: S2
Need Ship Date:00/00/0000 Original Required Delivery Date:09/08/2023
SPE8E8-26-T-4065 NSN/Part Number: 4510-00-138-8212 Quantity: 10 EA Purchase Request: 7016966865QTY: 10 Delivery: 20 days ADO