FELT, MECHANICAL, PREFOR
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract pertains to the procurement of 385 units of FELT, MECHANICAL, PREFORMED with NSN 5330-00-599-8279, specified to meet precise dimensional requirements of 5.500 inches in outer diameter, 4.734 inches in inner diameter, and 0.187 inches in thickness. The item is classified as a commercial item and must be manufactured in accordance with the current revision of a recognized part standard, either military or consensus non-governmental, with prior revisions still acceptable for historical hardware. All new units produced after the solicitation date must conform to the latest standard revision. The item must comply with MIL-STD-130N for identification marking, contain no asbestos as defined by FED-STD-313, and is subject to critical item source inspection. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated, and unspecified attributes are treated as major with assigned verification levels or AQLs. The purchase is fully competitive under a military or federal specification. The solicitation number is SPE7L3-26-T-135S, issued on July 28, 2026, with a response deadline of August 7, 2026. Delivery is required within 48 days after award, and performance is designated for Robins AFB, GA, ZIP 31098-1887. The contracting agency is the Department of Defense under Land Supplier Opns Vehicle Spt, with Susan Diamond as the primary point of contact via email dla.flbb1prs@dla.mil and phone 6146925625. The NAICS code is 333998, and the acquisition falls under DLA packaging and technical quality requirements, incorporating standards from the DLA Master List of Technical and Quality Requirements. The procurement does not involve any set-aside designation and is subject to the DLA master list revision in effect on the solicitation issue date.
General Info
Agency
NAICS
Place of Performance
BLDG 376, ROBINS A F B, GA, 31098-1887, USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Response Deadline
Organization & Contact Information
Full Description
FELT, MECHANICAL, PREFORMED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
5.500 IN OD; 4.734 IN ID; 0.187 IN THK
IDENTIFY TO:
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY NO ASBESTOS AS DEFINED IN FED-STD-313 IS PERMITTED IN THIS ITEM CRITICAL ITEM SOURCE INSPECTION REQUIRED. THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE NSN/Part Number: 5330-00-599-8279 Quantity: 385 EA Purchase Request: 7017440001QTY: 385 Delivery: 48 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Same awarding agency