Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Fence Materials Supply (Galvanized Wire and Tubing)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of 12.5-gauge galvanized wire and 16-gauge tubing specifically designed to meet federal specifications for outdoor durability and corrosion resistance in forested environments. These materials are intended for use in fencing applications and must withstand prolonged exposure to moisture, vegetation, and varying weather conditions typical of such terrains. All items must comply with established federal standards to ensure long-term structural integrity and minimal maintenance requirements. The contract is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid, reinforcing support for small business participation in federal procurement. The NAICS code 332313 indicates the focus is on metal service centers and related activities involving fabricated metal products. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, at 6:00 PM. Performance is required at Ahsahka, Idaho, with a ZIP code of 83520, indicating the materials will be deployed in a remote, forested region managed by the US Army Engineer District Walla Walla under the Department of Defense. While no point of contact or detailed address information is provided, the contract is accessible via the SAM.gov platform for qualified bidders. The emphasis on corrosion resistance and environmental durability highlights the critical need for materials that can endure hostile outdoor conditions without degradation over time.

General Info

Supply of 12.5-gauge galvanized wire and 16-gauge tubing for fencing in Ahsahka, Idaho, per federal standards, small business set-aside.

Agency

Department Of Defense → US Army Engineer District Walla WalView Agency

NAICS

332313 - Plate Work ManufacturingView NAICS

Place of Performance

Ahsahka, ID, 83520, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → US Army Engineer District Walla Wal
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → US Army Engineer District Walla Wal
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of 12.5-gauge galvanized wire and 16-gauge tubing meeting federal specs for outdoor durability and corrosion resistance in forested environments.

Similar Contracts

Same NAICS industry code

NAICS: 332313
New
DIBBS
PLATE, AUTOMOBILE, INThe contract specifies the procurement of 100 individual metal automobile plates, designated by NSN 8345-00-292-9414, for the U.S. Department of Defense under solicitation SPE1C1-26-Q-0390. The item is subject to strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with inspection governed by FAR Part 52.246-2. The contractor must submit two first article samples for visual, dimensional, and shade evaluation, with a 30-day review period before production authorization. The plates must meet specific design criteria including emblems and stars for Commandant’s and General Officer’s use by the USMC. The contract requires full compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking regulations, with no special marking code applied. The unit of issue is each, priced at a firm fixed price with zero variance allowed in quantity. Delivery is required at the destination address—Arizona Industries for the Blind in Phoenix, AZ—within 90 days after contract award, with FOB destination terms and acceptance occurring at the point of delivery. The government does not provide specialized tooling for casting or forging, and contractors are directed to submit a Casting and Forging Assistance Request if needed. MIL-STD-105E has been revoked and is no longer valid; future quality sampling must align with either MIL-STD-1916 or ANSI/ASQ Z1.4, though users must validate suitability. The contract falls under covered defense information protocols and references standardized logistics and transportation procedures outlined in DLAD Proc Notes C19 and C20. The solicitation was posted on July 24, 2026, with responses due by July 31, 2026, and the material need date is January 29, 2027.
C AND T SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332313
New
DIBBS
CAP, PROTECTIVE, DUST ANThe contract solicitation SPE7LX-26-U-8624 is for the procurement of protective dust and moisture seal caps with NSN 5340-01-446-4208 under an indefinite delivery contract, with an estimated quantity of 129 units and a guaranteed minimum of 19 units. The item is classified as a commercial product defined by SAE AS85049/138C Revision C or its amendment, requiring manufacture to the current revision of the standard as of the solicitation date. Delivery is FOB origin with a 155-day delivery window, and inspection and acceptance occur at the destination point. Packaging must comply with the DLA Master List of Technical and Quality Requirements, prioritizing RP001 for palletization and MIL-STD-129 for marking and labeling, with hazardous materials governed by FED-STD-313 and IP025 while non-hazardous items adhere to ASTM D3951. All items must be marked per MIL-STD-130N with Data Matrix barcodes for U.S. military property identification. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and no acceptance of defective lots. The contract prohibits the use of Class I ozone-depleting chemicals and hexavalent chromium, and mandates compliance with CMMC Level 2 cybersecurity self-assessment and safeguarding of covered defense information under FAR and DFARS clauses. Payment must be processed through WAWF using an invoice and receiving report, and the acquisition is a total small business set-aside with no price quoted in the solicitation but a maximum contract value capped at $350,000. All contractual obligations, including representations for entity identification, socioeconomic status, and hazardous material compliance, are binding upon award, and the contractor is subject to full inspection at destination, with no flexibility in quantity variance beyond the guaranteed minimum.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332313
New
DIBBS
DECONTAMINATION SUBThis contract pertains to the procurement of a decontamination subsystem for personnel, identified by part number H-807S and NSN 4230-01-606-7328, with a quantity of twelve units to be delivered FOB origin within 105 days. The item is classified as a commercial item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s packaging requirements. No asbestos as defined by FED-STD-313 is permitted, and mercury or mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lights, certain instruments, weapon systems, or chemical reagents approved by NAVSEA; in those cases, portable devices must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Documentation for source approval is required, and government identification must be removed from any non-accepted supplies. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is November 17, 2026, with an original delivery target of January 25, 2027. Transportation logistics are governed by DLAD procedural notes C19 and C20, and all units of issue follow DoD standards as referenced in the official DLA unit of issue file.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 332313
New
DIBBS
SHEET, METALThis contract specifies the procurement of aluminum alloy sheet metal with precise dimensional requirements: 0.071 inches thick, 48 inches wide, and 96 inches long, made from Alloy 7075 in the T6 temper condition. The material must fully conform to the referenced technical standards including MIL-STD-129R, SAE AMS-QQ-A-250/24C, ASTM B666/B666M-20, and ASTM B660-23, with all shipments requiring a Certificate of Quality Compliance that includes mill-material certification. The product is subject to strict identification and marking requirements, mandating that each sheet be labeled with the DLA contract delivery order number, NSN, specification revision, alloy, grade, class, type, part number, die number, temper, manufacturer name, heat and lot number, and exact dimensions using approved methods such as stamping or stenciling that ensure legibility, durability, and resistance to contamination. Continuous marking is required, and no test coupons are permitted; material must be supplied in whole-foot increments only. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared. Non-compliant products will be deemed unauthorized substitutions with potential criminal penalties. The contract waives source inspection requirements for QSLD-compliant suppliers, and all packaging must adhere to DLA’s packaging requirements and ASTM B660 Level A standards with preservation and marking codes ZZ and Z as specified. Delivery is FOB origin with a 167-day lead time and zero variance allowed in quantity. Shipments must be palletized per RP001, labeled in accordance with MIL-STD-129, and sent to the designated DLA distribution facility in New Cumberland, PA. The solicitation is tied to contract SPE8E4-26-T-1922, with a response deadline of August 3, 2026, and an original required delivery date of December 28, 2026, and is governed by DLA’s full suite of technical, quality, and procurement policies referenced in their master list.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 332313
New
DIBBS
SHEET, METALThis contract specifies the procurement of 9 sheets of nickel-copper alloy, Class A, Form 4, in cold rolled annealed condition, with exact dimensions of 0.187 inches thickness, 42.00 inches width, and 120.00 inches length, totaling approximately 301.45 pounds per sheet. The material must strictly conform to the referenced technical and quality standards including MIL-STD-129R for marking, ASTM A700-14 for packaging, and SAE AMS2807C for alloy specifications, with all documentation derived from the DLA Master List of Technical and Quality Requirements. Full compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the QSLD as of June 1994 are eligible to bid, and any deviation must be explicitly declared. Unauthorized substitutions may result in criminal penalties. The material must be supplied in whole-foot lengths only, with continuous marking on every unit including DLA contract number, NSN, specification revision, grade, alloy, manufacturer, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material. A Certificate of Quality Compliance, including mill certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must follow MIL-STD-2073-1E with special codes Z and ZZ as defined in ASTM A700, and palletization must adhere to DLA packaging requirements. No test coupons are permitted, and failure to meet these exacting requirements will result in rejection. Delivery is FOB origin to the Puget Sound Distribution Depot in Bremerton, WA, with a required delivery date of April 14, 2027, under a total small business set-aside solicitation.
PUGET SOUND

POSTED

3 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → US Army Engineer District Walla Wal

Same awarding agency

NAICS: 238990
New
Federal
DWA Temporary Elk Exclosure InstallationThe contract W912EF26QA082 for DWA Temporary Elk Exclosure Installation is a firm-fixed-price solicitation issued by the U.S. Army Engineer District Walla Walla under the Department of Defense, set aside exclusively for small businesses as defined by FAR 19.5. The work involves installing temporary elk exclosure fencing at the Dworshak Project Office in Ahsahka, Idaho, with performance required between August 1 and October 15, 2026. Contractors must comply with OSHA standards and USACE EM 385-1-1, submit an Accident Prevention Plan and Activity Hazard Analysis prior to beginning work, and use E-Verify to screen all personnel. The fence must meet specific technical criteria: 8 feet in height with posts spaced 10 feet apart, driven 24 inches into the ground, constructed of 12.5-gauge galvanized wire and 16-gauge tubing, taut with no bulges, and installed with properly tamped backfill. A one-year warranty on labor and workmanship is required, and acceptance is determined by the Government at the delivery site within seven business days of completion, based on Technical Exhibit 1 and the Quality Assurance Surveillance Plan. All offerors must be currently registered and active in SAM.gov and submit a completed and signed SF-1449, along with an SF-30 if the offer is an amendment. Proposals must include descriptive materials such as manufacturer data sheets, catalog cut sheets, warranties, and illustrations, all submitted electronically to zachary.s.newby@usace.army.mil no later than August 3, 2026, at 11:00 AM local time. Invoicing must be done electronically through WAWF as mandated by DFARS 252.232-7003, with payments routed to the Dworshak Project Office in Ahsahka, ID. The contract incorporates multiple FAR and DFARS clauses, including provisions for cybersecurity compliance (DFARS 252.204-7012), safeguarding covered defense information, electronic payments, small business subcontractor acceleration, and prohibitions on inverted domestic corporations and debarred contractors. Wage determinations from WAGE DETERMINATION-2015-5511 apply under the Davis-Bacon Act, and no packaging, marking, or preservation requirements are explicitly defined beyond referencing
All Other Specialty Trade Contractors

POSTED

2 days ago

DEADLINE

in 9 days
View Details