Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Field Emission Scanning Electron Microscope (FESEM) System

Open

International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

IDN

Set-Aside

NONE

Documents

This scope was carved out of 678930-DD.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Field Emission Scanning Electron Microscope (FESEM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 10

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIAEA

ContactsNo contacts available

OfficeN/A

Organization / AgencyIAEA

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a fully self-contained FESEM system for prime contractors on IAEA projects for the National Research and Innovation Agency (BRIN) in Indonesia. Manufactures a Schottky-type field emission source, integrates low-aberration high-conical objective lenses, SE and BSE imaging, and an EDX detector for microanalysis. Provides control software for a central microprocessor/PC. Delivers one operational FESEM system with English manuals.

Similar Contracts

Same NAICS industry code

High-Pressure Liquid Chromatography (HPLC) System Supplier

Texas A&M University

POSTED

about 4 hours ago

DEADLINE

Solicitation # AG-RSCH-ITB-6628

Texas A&M AgriLife Research is soliciting bids for a turnkey HPLC system under solicitation AG-RSCH-ITB-6628. The requirement is for a complete, operational system that is set up and ready for use, including a quaternary pump and inlet solvent filters. The system must be functionally equivalent to the Agilent Eclipse Plus, with column specifications of 4.6 mm internal diameter, 150 mm length, and a 5 micron particle size. A single vendor must perform all installation and provide comprehensive training and operational manuals. Bids are due by November 30, 2026, at 2:00 PM CST. The agency will award the contract based on best value criteria, evaluating factors such as purchase price, vendor reputation, quality, needs alignment, past performance, total cost of ownership, warranty, and delivery time. Payment terms are Net 30 days following successful installation, completion of training, and agency acceptance. Awarded vendors must provide a current certificate of insurance, comply with export control disclosures, and potentially submit an Accessibility Conformance Report. Bidders must provide unit pricing, estimated delivery timelines, and detailed warranty information within their submissions.

Texas A&M University

POSTED

about 4 hours ago

DEADLINE

NanoRaman Hybrid System ManufacturingThis subcontract for NanoRaman Hybrid System Manufacturing supports prime contractors on research projects at Kansas State University. The scope of work involves the delivery of a fully operational, integrated system featuring an open-architecture microscope, TERS imaging capabilities, and an automated XYZ mapping stage with 0.1 micron step resolution. To meet technical requirements, the system must include TERS-capable optics and laser sources. A critical safety requirement of the contract is the inclusion of a laser safety enclosure to ensure the final system achieves Class 1 Laser Status. The project is categorized under NAICS code 334516, with a response deadline set for December 1, 2026.

Kansas State University

POSTED

about 6 hours ago

DEADLINE

NanoRaman Hybrid System

Solicitation # KSU27-114

Kansas State University is soliciting quotations for a NanoRaman Hybrid System to support research and education within the Chemical Engineering department. The required system must feature a permanently integrated open microscope with a laser safety enclosure to achieve Class 1 laser status, an automated mapping stage with specific micron-level step resolutions, and a dedicated PC with dual monitors and control software. The award will be granted to the responsible vendor providing the most advantageous quotation based on price, quality, delivery, and past performance. The selected vendor must provide comprehensive white glove delivery services, including transportation, inside delivery, installation, calibration, and testing, with all charges quoted as FOB Destination, Prepaid. Delivery is only considered complete upon final university acceptance of the fully operational equipment. Required submission documents include an initialed copy of Form KSU-146a, a State of Kansas Tax Clearance Certification, proof of insurance per Exhibit B, and documentation of past experience with at least three references. Proposals must be submitted electronically via the KSU Bid Portal by December 1, 2026, and must detail delivery lead times, installation approaches, site requirements, and training plans.

Kansas State University

POSTED

about 6 hours ago

DEADLINE

MEASURING TUBE, GAS ANA

Solicitation # SPE2DH-27-T-0483

This procurement under solicitation SPE2DH-27-T-0483 is for the acquisition of gas analyzer measuring tubes designed to measure carbon dioxide content in compressed gases. The required items are round glass tubes with melted tips, featuring a measuring range of 100 to 3000 parts per million for one liter of air. The unit of issue is a package containing 10 tubes, with the total quantity requested being two packages. Delivery is required within 20 days after order, with the destination being the USS Arlington (LPD 24) at FPO AE 09564. The contract mandates a non-extendable shelf life of 24 months, with a requirement that no more than three months elapse between the date of manufacture and the date of delivery. Packaging must adhere to ASTM D3951 and DLA packaging requirements, while marking must comply with Medical Marking Standard No. 1 and MIL-STD-129. The acquisition is governed by NAICS code 334516 and includes various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the use of the Wide Area WorkFlow system for electronic invoicing and payment. Destination inspection is required per FAR 52.246-2.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 7 hours ago

DEADLINE

HPLC System Supply and DeliveryThis subcontract agreement focuses on the supply and delivery of High-Performance Liquid Chromatography (HPLC) systems for prime contractors working on Texas A&M AgriLife Research laboratory projects. The selected provider is responsible for delivering analytical instrumentation that adheres to strict technical requirements for chemical analysis, ensuring that each system is fully operational upon delivery to the designated facility. The opportunity is categorized under NAICS code 334516 and was posted on November 10, 2026. Interested parties must submit their responses by the deadline of November 30, 2026. This procurement is managed through the Texas state agency system to support the specialized research infrastructure of the AgriLife Research organization.

Texas A&M AgriLife Research

POSTED

about 10 hours ago

DEADLINE

Solicitation # AG-RSCH-ITB-6628

Texas A&M AgriLife Research has issued an Invitation to Bid, solicitation number AG-RSCH-ITB-6628, for the procurement of an HPLC System. This solicitation is managed by the Texas A&M AgriLife Procurement Office and is intended for performance within the state of Texas. The primary point of contact for this procurement is Kaitlyn Jordan. Interested vendors must register as bidders through the AggieBid portal to submit their responses electronically. The deadline for bid submission is November 30, 2026, at 2:00 p.m. Central Time. While the solicitation is active, specific details regarding the contract value, technical specifications, and evaluation factors were not provided in the initial bid posting notice.

Texas A&M AgriLife Research

POSTED

about 10 hours ago

DEADLINE

Real-Time PCR Instrument SupplierThis subcontract opportunity is for the supply of up to two Real-Time Polymerase Chain Reaction PCR instruments to support prime contractors working on projects for the Government of Ontario Ministry of Environment, Conservation and Parks. The required hardware must adhere to specific Instrument Controller Specifications to enable the analysis of environmental DNA for Cyanobacteria, Giardia, Cryptosporidium, Salmonella, and Bacteroidales. A key technical requirement is the inclusion of integrated barcode readers to ensure precise plate traceability. The successful supplier will be responsible for delivering two fully functional instruments to be used within Canada. Interested parties should note that the response deadline for this procurement is November 26, 2026.

Environment, Conservation and Parks

POSTED

about 10 hours ago

DEADLINE

Supply, Delivery, and Installation of up to Two (2) Real-Time Polymerase Chain Reaction (PCR) Instruments

Solicitation # tender_22337

The Government of Ontario, through the Ministry of Environment, Conservation and Parks, is soliciting the supply, delivery, and installation of up to two Real-Time Polymerase Chain Reaction (PCR) instruments for the Laboratory Services Branch in Etobicoke, Ontario. These state-of-the-art instruments will be used to analyze environmental DNA for Bacteroidales, Salmonella, Cryptosporidium, Giardia, and Cyanobacteria to support the Safe Drinking Water Act, Nutrient Management Act, Source Water protection, and the Hazardous Blue-Green Algae Response Program. The scope of work includes the hardware, a barcode reader for plate traceability, necessary consumables such as 96-well MicroAmp plates and seals, instrument performance testing, general training, and a minimum one-year warranty. The contract is expected to start on January 15, 2027, with a one-year term. Bids are submitted via the Ontario Tenders Portal and evaluated through a three-stage process: a mandatory requirements review, a technical response evaluation worth 60 points (covering delivery, installation, calibration, and bidder expertise), and a commercial evaluation worth 40 points. The final award will be granted to the highest scoring compliant bidder, with additional points awarded to Canadian businesses. Bidders must comply with strict occupational health and safety regulations, provide proof of insurance and WSIB coverage, and disclose any potential conflicts of interest.

Environment, Conservation and Parks

POSTED

about 10 hours ago

DEADLINE

Supply of Bench-top Source Measure Unit (SMU)This subcontract, issued by the Department of Defense for W6QM Micc-Ft Drum, requires the procurement of one new bench-top Source Measure Unit (SMU) to support electronics measurement student lab projects. The equipment must meet Keysight B2902C specifications, featuring two independent channels, four-quadrant operation, and femtoampere resolution specifically for semiconductor characterization. The contract is designated as a Total Small Business Set Aside under NAICS code 334516. The selected provider must deliver one fully functional unit on an F.O.B. destination basis and provide a Certification of Country of Origin. The performance location is associated with zip code 10996, with a response deadline set for November 17, 2026.

W6QM Micc-Ft Drum

POSTED

about 12 hours ago

DEADLINE

Seed Lab Aspiration Equipment SupplierThis subcontract involves the supply and delivery of specialized air-based seed separation equipment for prime contractors working on USDA Forest Service seed lab projects. The scope of work requires the provision of one Fractioning aspirator and one Model 63-115-60-VS Laboratory aspirator, ensuring that all delivered equipment is fully operational. The supplier must adhere to Buy American-Supplies regulations under FAR 52.225-1 and is responsible for F.O.B. Destination delivery to Dry Branch, Georgia. This procurement is managed under the Department of Agriculture for the Csa East 2 Usda-Fs agency, falling under NAICS code 334516.

Csa East 2 Usda-Fs

POSTED

about 12 hours ago

DEADLINE

Purchase and Delivery of Seed Lab Equipment for the Southern Region

Solicitation # 12444027Q0008

Solicitation 12444027Q0008 is a combined synopsis and request for quotation issued by the United States Department of Agriculture for the purchase and delivery of seed lab equipment for the Southern Region. This unrestricted acquisition, categorized under NAICS 334516, is a firm-fixed price purchase order. The required equipment includes a fractioning aspirator, a laboratory aspirator, and a small bundle thresher with associated components such as metal raspbars concave, round spiked concave, and a 110-volt motor, along with crating for all items. All deliverables are requested as F.O.B. Destination and must be shipped to Dry Branch, Georgia, by March 31, 2027. Award will be granted to the offeror who is determined to be the highest technically rated, provided the pricing is fair and reasonable and past performance is acceptable or neutral. The government will not necessarily award to the lowest-priced offeror, and no trade-offs will be conducted. To be considered responsive, contractors must provide pricing for all items on Section 20 of the SF1449 and provide documentation demonstrating their technical capability. Quotations must be emailed to [email hidden] by November 19, 2026, at 5:00 PM EST, with prices held firm for 90 calendar days. The contract incorporates various FAR and AGAR clauses, including Buy American requirements and standard commercial terms and conditions.

Csa East 2 Usda-Fs

POSTED

about 12 hours ago

DEADLINE

More opportunities from IAEA

Same awarding agency

Hydrotesting System Training and Calibration Services

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Russian Language Technical Documentation and Marking

Translation and Interpretation Services

POSTED

DEADLINE

Hydrotesting Pump and Valve Assembly

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Pressure Transducers and Data Logging System

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

Inflatable Double-Packer (Straddle Packer) Fabrication

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

FESEM Site Acceptance Testing (SAT) and Maintenance Support

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Precision Instrument Export Packing and Crating

Freight Transportation Arrangement

POSTED

DEADLINE

Indonesian Electrical Compatibility & Power Protection Suite

Battery Manufacturing

POSTED

DEADLINE

Borehole hydrogeological testing equipment (KAZ9015) #117645

Solicitation # 678938

The International Atomic Energy Agency (IAEA) is soliciting a firm fixed price contract for the provision of an integrated Hydrotesting System to support geological and hydrogeological characterization in the Semipalatinsk region of Kazakhstan. The system is designed for uncased boreholes with diameters between 76mm and 93mm and must be capable of characterizing flow conditions and hydro-chemical composition at depths up to 200 meters below ground level. Key deliverables include pressure monitoring transducers and ancillary components for groundwater sampling. The award will be granted to the lowest priced technically compliant quotation, with a requirement for a minimum 12-month warranty and 12 months of remote post-delivery support. The contractor is responsible for all freight and insurance costs, ensuring the system is packed for secure air shipment according to international standards. All safety and operational markings must be in Russian, while shipping marks and package information must be in English. Payment is issued via bank transfer net 30 days after acceptance, with no advance payments or letters of credit provided. Bidders must submit quotations in Euro via the IAEA Supplier Portal by November 17, 2026, and must certify adherence to the United Nations Supplier Code of Conduct and the IAEA General Conditions of Contract.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Field Emission Scanning Electron Microscope (FESEM

Solicitation # 678930-DD

The International Atomic Energy Agency (IAEA) is soliciting a firm fixed price contract for the procurement of a Field Emission Scanning Electron Microscope (FESEM) to support the National Research and Innovation Agency (BRIN) in Indonesia. The required system must feature an operating voltage of 30 kV or higher, provide a magnification range from x10 to x1,000,000, and achieve secondary electron image resolutions better than 0.6 nm at 15 kV and 1.1 nm at 1 kV. Key functional requirements include ultrahigh resolution imaging, charge reduction and low vacuum modes for insulating specimens, an energy filter mode, and an Energy Dispersive X-Ray detector for microanalysis. The system must be fully self-contained and compatible with Indonesian electrical standards, specifically 230 Volts AC / 50 Hz for single phase and 415 V / 50 Hz for three phase, while operating reliably between 15 and 30 degrees Celsius. Award will be granted to the lowest priced technically compliant bidder. Qualification requires at least five years of industry experience, a qualified project management team, and a proven track record of implementing similar projects. Bidders must adhere to the IAEA General Conditions of Contract and the United Nations Supplier Code of Conduct. Payment is issued via bank transfer net 30 days after acceptance of delivery and invoice, with no advance payments or letters of credit permitted. The contractor is responsible for all freight and insurance costs, though the IAEA utilizes a global freight forwarder for coordination. Final acceptance is contingent upon successful Factory and Site Acceptance Tests conducted according to a mutually agreed protocol. All equipment must be packed to international air shipment standards with safety markings in English and a minimum warranty period of twelve months.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Specialized Export Packaging and International FreightThis subcontract focuses on the specialized export packaging and international freight transport of sensitive scientific equipment destined for the International Atomic Energy Agency in Laos. The scope of work requires the use of moisture-barrier packaging and shock-absorbent crating to protect high-value assets during transit. The contractor is responsible for ensuring strict adherence to international modal dangerous goods regulations and the SSR-6 2012 Edition for the Safe Transport of Radioactive Material. The primary objective is the secure delivery of these materials to their final destination in the Lao People's Democratic Republic under NAICS code 488510.

Freight Transportation Arrangement

POSTED

DEADLINE

Ion Chromatography Operational SuppliesThis subcontract for Ion Chromatography Operational Supplies involves the provision of essential chemical reagents, columns, solvents, and consumables to prime contractors supporting the International Atomic Energy Agency. The scope of work focuses on delivering complete operational startup kits that bundle chromatography columns, eluent, standards, and vials to ensure immediate system functionality. The contractor is responsible for packaging all chemicals in strict accordance with safety data sheets and international transport regulations to facilitate secure global delivery. Performance for this contract is designated to take place in the Lao People's Democratic Republic under NAICS code 325199.

All Other Basic Organic Chemical Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS