Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Fiery Gizzard S.P. Electrical System

Active
32701-13973State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Tennessee Department of General Services has issued a solicitation for the Fiery Gizzard S.P. Electrical System under solicitation number 32701-13973, with a posted date of August 1, 2026, and a response deadline of August 17, 2026. This solicitation is targeted toward suppliers and contractors interested in providing specialized electrical system components or services, with performance expected to occur within the state of Tennessee. The procurement is categorized under state, local, or educational (SLED) government procurement and is managed by the Central Procurement Office, which serves as the primary point of contact for inquiries and submissions. All correspondence must be directed to the designated email address, cpo.website@tn.gov, and no alternate contact information is provided. The solicitations details do not include a NAICS code or specific set-aside provisions, indicating eligibility is open to all qualified bidders without preference. Potential respondents are directed to the official Tennessee General Services website for full solicitation documents and submission guidelines.

General Info

Tennessee seeks electrical system bid for Fiery Gizzard SP by August 17, 2026, open to all qualified vendors.

Agency

Tennessee Department of General ServicesView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

TN, US

Set-Aside

NONE

Documents

(4)

ITB 0000013973 Fiery Gizzard Visitor Center Electrical System Replacement

PDF•itb

Visitor Center Electrical System Replacement SOW

PDF•sow

Pre-Bid Information for Event 32701-0000013973 Fiery Gizzard Visitor Center Electrical System Replacement

PDF•pre-bid-information

Fiery Gizzard S.P. Electrical System Replacement ITB 32701-0000013973

PDF•itb

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee Department of General Services
Contacts1 person available
OfficeTN, US
Organization / Agency
Tennessee Department of General Services
View Agency Profile
Office AddressTN, US
Contacts
Central Procurement Office
contact@example.gov

Full Description

Show more
Fiery Gizzard S.P. Electrical System

Similar Contracts

Same NAICS industry code

NAICS: 238210
New
RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI
Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0
The contract involves the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, executed in two phases and including conduit trenching and boring between three buildings. The work falls under NAICS codes 238210, 237130, and 237990 and has a construction magnitude between one and five million dollars. The solicitation is restricted to small business set-asides, encompassing Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business categories. All responses must be submitted by the deadline of August 15, 2026, and the contract was posted on August 6, 2026. Interested firms should direct inquiries to Anna Ma, Subcontract Administrator at Parsons, via email at anna.t-ctr.ma@faa.gov or by phone at 360-204-4418. The contracting agency is PTSI Managed Services, Inc., with the place of performance located in Honolulu, Hawaii.
PTSI Managed Services, Inc.

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238210
New
RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI
Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi
The contract calls for the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, implemented in two phases and involving conduit trenching and directional boring between three buildings. The work falls under NAICS codes 238210, 237130, and 237990 and has a construction magnitude between one and five million dollars. The solicitation is set aside for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The project includes both design support and construction components, with a response deadline of August 15, 2026. Interested parties must contact Anna Ma, Parsons Subcontract Administrator, at anna.t-ctr.ma@faa.gov for further details.
PTSI Managed Services, Inc.

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238210
New
Replacement Fiber Line
Solicitation # Replacement Fiber Line
The contract involves the replacement of existing multi-mode fiber optic cabling with 12-strand single-mode fiber optic cabling to establish network connectivity between Building 2436 and Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope requires the complete removal of retired multimode aerial fiber lines and splice boxes from utility poles and building infrastructure, followed by the installation of new 12-strand OS2 single-mode fiber using center-owned utility poles. All labor, equipment, and tools must be furnished by the contractor, with specific hardware requirements including Belden FS3L0024NS fiber, ECX-01U rack-mounted enclosures, FFSX12LD adapter panels, and FTSLC900FS01 LC connectors or equivalent brands. SFPs are provided by Job Corps. The work must meet strict quality standards, ensuring all materials and workmanship are merchantable, free of defects, and conform to specifications provided by Management & Training Corporation. Final acceptance occurs at the MTC-designated point after delivery, regardless of prior inspections or payments. The solicitation is issued as a Fee-For-Service RFQ under a lump sum pricing structure, with no estimated contract value disclosed. Bidders must self-certify as a small business entity under NAICS code 238210, with eligibility for set-asides including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business. Compliance with Federal Acquisition Regulation clauses is mandatory, including Service Contract Labor Standards with Wage Determination WD#2015-4687 Rev 31, Contract Work Hours and Safety Standards Act, Reporting Executive Compensation, and clauses related to data rights and subcontractor protections. First-tier subcontractors exceeding $30,000 must disclose debarment status, and all contractors are required to maintain $1 million per occurrence / $3 million aggregate general liability insurance with MTC as additional insured, $1 million auto coverage, and $500,000 workers’ compensation. The contractor must adhere to the Drug-Free Workplace Act, Anti-Kickback Act, and provide a tax-exempt purchase certification. Invoices must be submitted weekly or bi-weekly with detailed breakdowns of services, pricing, dates, and purchase order numbers. Any data breach must be reported to the Department of Labor within one hour of discovery
Earle C. Clements Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 4 days
View Details
NAICS: 238210
New
AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY
Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny
The FAA is upgrading an existing VHF Omnidirectional Range (VOR) facility in Watertown, New York, to a modern Doppler VORTAC system with an offset TACAN, requiring the complete demolition of the current facility. The new installation includes an on-site 37’x37’ steel building equipped with a 60-foot diameter counterpoise integrated into the roof, along with all necessary foundations, site preparation, and utility connections. Additionally, an offset TACAN component will be constructed as a 16’x16’x20’H walk-up steel tower with its own foundations, site work, and utilities. The project is being managed by PTSI Managed Services, Inc. (Parsons) under contract number AEA-0536 and is open exclusively to small business set-asides, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses. The solicitation was posted on August 6, 2026, with responses due by August 28, 2026, and the primary point of contact is Angela Stydinger at the FAA.
PTSI Managed Services, Inc (Parsons)

POSTED

about 5 hours ago

DEADLINE

in 21 days
View Details
NAICS: 238210
New
SLED
OER Lighting Retrofit Louis Pasteur Building and Middletown Armory Building
Solicitation # RFQ27006897
The State of Rhode Island through the Office of Energy Resources is soliciting bids for a lighting retrofit project to upgrade 435 existing lighting fixtures to LED at the Louis Pasteur Building in Cranston and 132 fixtures at the RI Army National Guard Middletown Armory. The solicitation, identified as RFQ27006897, was posted on August 6, 2026, with responses due by September 11, 2026, at 3:00 PM. A mandatory pre-bid meeting is scheduled for August 19, 2026, beginning at 9:00 AM at the Middletown Armory, followed immediately by a site visit at the Louis Pasteur Building in Cranston. All work must be performed on-site at these two locations in Rhode Island, and the procuring agency is the State of Rhode Island under the SLED classification. Katherine Missell is the primary point of contact for inquiries, reachable via email at katherine.missell@purchasing.ri.gov. The project does not specify a small business set-aside, and details regarding NAICS code or contract type are not provided in the available data. Bidders are expected to submit proposals through the state’s online vendor portal.
State of Rhode Island

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238210
New
Federal
Electrical Distribution System SupportThe contract titled Electrical Distribution System Support requires providing site access and performing structural modifications to enable upgrades to the electrical distribution system, with specific focus on establishing conduit pathways and ensuring seamless coordination with electrical contractors. The work is scoped to support infrastructure enhancements necessary for improved electrical capacity and reliability, demanding precise planning and execution to integrate new system components without disrupting existing operations. All tasks must be carried out in alignment with industry best practices and safety standards to ensure long-term functionality and compliance. This is a Small Business Set Aside subcontract under NAICS code 238210, exclusively available to small business concerns, sponsored by the USDA Agricultural Research Service’s Agricultural Facilities Management and Planning Division. The opportunity was posted on August 6, 2026, with responses due by August 24, 2026, and the performance location is in Prairie du Sac, Wisconsin, zip code 53578. While no specific point of contact is listed, interested parties must engage through the official SAM.gov platform using the provided UI link to access full solicitation details and submit proposals in accordance with federal contracting requirements.
USDA Ars Afm Apd

POSTED

about 9 hours ago

DEADLINE

in 18 days
View Details
NAICS: 238210
New
Federal
Installation of New Motorized Counterweight Rigging Systems
Contracts Services

POSTED

about 9 hours ago

DEADLINE

in 20 days
View Details
NAICS: 238210
New
Federal
Electrical Installation and Wiring ServicesThis contract is for the installation of electrical systems including power distribution, lighting, and control wiring on commercial or infrastructure projects under a subcontract arrangement. It is designated as a Small Business Set Aside with total set-aside status, ensuring eligibility and preference for small businesses as defined by the SBA. The North American Industry Classification System code 238210 applies, identifying the work within electrical contracting services. The solicitation was posted on August 6, 2026, with a response deadline of August 25, 2026, at 4:00 PM. The contracting agency is Construction A/e Team 3 Fws under the Department of the Interior, though specific location details for performance or address information are not provided. The opportunity is accessible online through the SAM.gov platform for registered bidders seeking to submit proposals for this electrical installation scope.
Construction A/e Team 3 Fws

POSTED

about 9 hours ago

DEADLINE

in 19 days
View Details
NAICS: 238210
New
Federal
CA-MERCED NWR-Solar Distribution Panel Replacement
Solicitation # 140FC326Q0046
The U.S. Fish and Wildlife Service is soliciting bids to replace a failed 400-amp solar electrical panel and associated components at the Merced National Wildlife Refuge, located at Hwy 140 Snowbird Lane in Livingston, California. The project is critical to restoring reliable power for a deep well system that supports groundwater pumping, wetland water level regulation, and wildlife habitat management. The new electrical distribution panel and related equipment must meet all applicable codes and standards, ensuring safe, long-term operation of the solar-powered infrastructure. The estimated project cost ranges between $15,000 and $25,000, and the work must be completed within 60 calendar days after contract award. This is a total small business set aside under NAICS code 238210 with a size standard of $19 million, and only registered small businesses in SAM.gov are eligible to respond. The solicitation requires a firm-fixed-price contract based primarily on price, with bidders expected to demonstrate proven experience in solar installation, familiarity with common solar brands, and full compliance with California state and local regulations. All proposals must be submitted on company letterhead with a completed Pricing Form, SAM.gov UEI code, and contact information, and must include the FAR provisions 52.212-1 and 52.212-4 with applicable sections filled out. Due to the project value exceeding $150,000, both payment and performance bonds are required within ten calendar days of award. Proposals must adhere to strict formatting standards: 8.5 x 11 inch pages, 12-point font, one-inch margins, and no decorative elements. All questions must be emailed to terrence_anderson@fws.gov with the solicitation number included, and site visits must be scheduled in advance. The deadline for submissions is August 28, 2026, at 12:00 pm PST.
Fws Construction & A/e - Bil/disaster

POSTED

about 9 hours ago

DEADLINE

in 22 days
View Details
NAICS: 238210
New
Federal
Audio System Modernization
Solicitation # 030ADV26R0049
The Library of Congress is seeking a contractor to design and implement a comprehensive digital audio system modernization for the historic Coolidge Auditorium, a 485-seat venue originally built in 1925 for chamber music performances. The existing analog infrastructure, upgraded in the 1990s but now largely nonfunctional, will be entirely replaced with a modern, permanently installed digital system to eliminate the need for temporary, portable equipment brought in for each event. The project involves removing obsolete wiring and equipment, installing new audio hardware and technical furniture, programming the system using Q-SYS technology, and delivering detailed wiring diagrams in standardized formats. All work must adhere to strict security protocols, including compliance with NIST SP 800-53 for Controlled Unclassified Information, encryption using FIPS 140-3 validated standards, and mandatory annual IT security training for all personnel. The contractor must ensure seamless integration with the auditorium’s original acoustics and complete all deliverables within the base performance period of September 29, 2026, to September 28, 2027, followed by a mandatory one-year warranty period. The contract is structured as a firm-fixed-price arrangement with no set-aside or socioeconomic preferences mandated, though offerors must submit detailed technical and price proposals in separate volumes via email under strict formatting requirements—8.5x11 inch pages, Times New Roman 12-point font, no hyperlinks, and no zipped or password-protected files, with submissions capped at 20MB per email. Evaluation will prioritize technical approach, including feasibility of the proposed design and qualifications of key personnel who must hold CTS certification and have demonstrated experience managing similar audiovisual integrations, followed by corporate experience and past performance, with price considered but deemed significantly less important than non-price factors. The contractor must comply with extensive security mandates including employee fitness requirements, mandatory nonsigning of NDAs, reporting of subcontractors in advance and annually, and immediate notification of any security incidents. Deliveries to the Capitol Hill Campus require advance notification to the Off-Site Delivery Center, adherence to vehicle clearance limits, and prior authorization from the U.S. Capitol Police. Invoicing is exclusively electronic through the Invoice Processing Portal, and all deliverables must be clearly marked with the contract number, contractor information, and recipient details as dictated by Library-specific clauses. All proposals must be submitted by August 25, 2026, following a site visit and revised question
Contracts Services

POSTED

about 9 hours ago

DEADLINE

in 19 days
View Details
NAICS: 238210
New
Federal
NIST Boulder Building 4 Generator and ATS Replacement
Solicitation # 1333ND26RNB190034
The National Institute of Standards and Technology (NIST) at its Boulder Campus is seeking a firm-fixed-price contractor to remove and replace the existing standby emergency generator and Automatic Transfer Switch (ATS) serving Building 4. The contractor must supply all labor, materials, equipment, supervision, and incidentals required to remove the old systems and install a new standby emergency generator capable of operating on both natural gas and diesel fuel, along with a compatible ATS. The scope includes all associated electrical modifications, conduit and wiring installation, testing, commissioning, and documentation, all in strict compliance with the Statement of Work, applicable national codes and standards, and NIST’s own site-specific requirements. The project aims to ensure uninterrupted emergency power supply for critical operations within the building. The solicitation, identified as 1333ND26RNB190034, was posted on July 10, 2026, and is a Total Small Business Set-Aside under NAICS code 238210. A mandatory site visit is scheduled for July 23, 2026, at 1 p.m. in Building 4, following a list of individuals approved for the visit on July 21, 2026. Questions from prospective bidders must be submitted by July 30, 2026, and proposals are due no later than August 12, 2026. The contract will be performed at the Boulder, Colorado location, with primary point of contact Lauren Lopez and secondary contact Travis Zoellner available via email for inquiries. The official solicitation can be accessed through the SAM.gov portal.
Department Of Commerce Nist

POSTED

about 9 hours ago

DEADLINE

in 21 days
View Details
NAICS: 238210
New
Federal
N--NOAA Western Regional Center H32 Electrical Repair
Solicitation # 1305M326Q0317
The contract, identified by solicitation number 1305M326Q0317, is a small business set-aside for commercial construction services to perform electrical repairs at the NOAA Western Regional Center in Seattle, Washington. The scope encompasses demolition, installation, replacement, and testing of electrical systems across multiple hangar bays, including wiring, panels, lighting, emergency power circuits, and grounding upgrades, with a 6-month performance period beginning at Notice to Proceed. Amendment 0001, issued July 28, 2026, updated the Statement of Work for CLIN 0002 and added CLIN 0007, which includes new technical exhibit pictures in the attachments. All work must comply with OSHA standards, applicable building and electrical codes, and hazardous material handling protocols for asbestos, PCBs, and mercury, with strict packaging, labeling, and chain-of-custody requirements for contaminated materials. The contract requires submission of detailed technical documentation such as single-line diagrams, as-built records, and certification of no asbestos-containing materials, alongside a job-specific safety plan and a one-year work guarantee. The solicitation is issued as a firm fixed-price, all-or-none purchase order under a trade-off evaluation process where non-price technical factors—technical approach and capability, experience in electrical repairs, and past performance—are significantly more important than price; no numerical weighting is assigned among these three technical factors, but failure to provide two relevant references results in a neutral rating. Offerors must be certified small businesses registered in SAM with a valid UEI or CAGE code and must self-certify their size status. Personnel are subject to security screening based on contract duration—NACI for contracts over 180 days or SAC for shorter durations—with required forms submitted within three days of award. Contractors must designate a contract manager and alternate, provide proof of identity for site access, conduct a pre-mobilization site visit, and assume full liability for unanticipated conditions. Invoices must be submitted via the IPP system with Net 30 payment terms, and final acceptance occurs at the NOAA facility in Seattle with 100% compliance required for all deliverables. The government does not accept responsibility for non-receipt of quotes, and all submissions must be sent via email to Jamie.Rosales@noaa.gov with PDF or Word attachments.
Department Of Commerce Noaa

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Tennessee Department of General Services

Same awarding agency

NAICS: 113310
New
SLED
Standing Stone SP Hazardous Tree Removal
Solicitation # 32701-13970
The Tennessee Department of General Services is soliciting bids for hazardous tree removal services at Standing Stone State Park under solicitation number 32701-13970, with a response deadline of September 3, 2026. This procurement is classified under the SLED category, indicating it is targeted toward state, local, or educational government entities, and is being managed by the Central Procurement Office in Tennessee. The work is to be performed within the boundaries of Standing Stone State Park in Tennessee, with no specific city or zip code provided for the exact location. Interested parties must submit proposals through the official procurement portal managed by the Tennessee Department of General Services, and all inquiries should be directed to the primary point of contact, the Central Procurement Office, via email at cpo.website@tn.gov. There is no set-aside designation or NAICS code specified, and the solicitation is open to any qualified bidder meeting the requirements outlined in the official posting.
Logging

POSTED

3 days ago

DEADLINE

in 27 days
View Details
NAICS: 238320
New
SLED
SACYSP York Home & Gristmill Painting & Roof Repl
Solicitation # 32701-13969
The Tennessee Department of General Services is soliciting bids for painting and roof replacement work at the York Home & Gristmill located in Tennessee. The solicitation, numbered 32701-13969, was posted on August 3, 2026, with a response deadline of September 1, 2026. The project falls under a state-level procurement process managed by the Central Procurement Office, which serves as the primary point of contact and can be reached via email at cpo.website@tn.gov. Work must be performed at the designated historic site in Tennessee, and all proposals must be submitted by the specified deadline to be considered. The contract is open to qualified contractors under a state agency procurement initiative with no set-aside classification specified.
Painting and Wall Covering Contractors

POSTED

4 days ago

DEADLINE

in 25 days
View Details
NAICS: 237310
New
SLED
Montgomery Bell SP Road Improvement
Solicitation # 32701-13971
The Tennessee Department of General Services is soliciting bids for the Montgomery Bell State Park Road Improvement project under solicitation number 32701-13971, with the opportunity posted on August 3, 2026, and responses due by September 2, 2026. This solicitation is classified under the SLED category, indicating it is targeted toward state, local, or educational government entities, and will be performed within Tennessee at Montgomery Bell State Park. The central procurement office serves as the primary point of contact, reachable via email at cpo.website@tn.gov, and all submissions must be directed through the official procurement portal linked on the Tennessee General Services website. The contract involves infrastructure enhancements to roads within the state park, though specific technical requirements, scope of work, or funding details are not enumerated in the provided data. Bidders are expected to comply with state procurement regulations and submit proposals prior to the deadline to be considered for award.
Highway, Street, and Bridge Construction

POSTED

4 days ago

DEADLINE

in 27 days
View Details
NAICS: 541330
SLED
Shop Drawing Preparation and Engineering ServicesThe contract entails the preparation of shop drawings for precast concrete components that must be submitted for state approval before any manufacturing can commence. This subcontract falls under NAICS code 541330, indicating it involves architectural, engineering, and related services, specifically focusing on the technical documentation required for construction materials. The work is being procured by the Tennessee Department of General Services under an invitation to bid, and all submissions must be completed and delivered by the response deadline of August 18, 2026. The scope requires adherence to state standards and approval protocols, ensuring that all drawings are accurate, complete, and compliant with applicable regulations prior to fabrication. Performance of the work is tied to a project within Tennessee, though the exact location is not specified, and contractors are expected to coordinate with state authorities to secure necessary clearances.
Engineering Services

POSTED

8 days ago

DEADLINE

in 11 days
View Details
NAICS: 327320
SLED
4,000 psi Concrete Supply (Ready-Mix)The contract calls for the supply of high-strength 4,000 psi ready-mix concrete intended for on-site casting or integration with precast concrete elements. The work falls under NAICS code 327320 and is structured as a subcontract, with no specific set-aside provisions applied. The Tennessee Department of General Services, operating through its Central Procurement Office, is the overseeing agency and has posted the opportunity on July 30, 2026, with responses due by August 18, 2026. While the exact location of performance is not specified, the concrete must meet strict structural requirements suitable for load-bearing applications. Bidders are expected to demonstrate capacity to deliver consistent, high-quality concrete in compliance with specified engineering standards, though no point of contact or detailed delivery terms are provided in the data. More information on submission guidelines and requirements can be found via the public procurement portal linked in the posting.
Ready-Mix Concrete Manufacturing

POSTED

8 days ago

DEADLINE

in 11 days
View Details
NAICS: 332439
SLED
Neenah R-1982-W Manhole Step SupplyThe contract entails the supply of Neenah R-1982-W specified manhole steps, with strict compliance required for the exact brand and model. This is a subcontract opportunity issued by the Tennessee Department of General Services, under NAICS code 332439, which pertains to other fabricated metal product manufacturing. Bidders must submit their responses by the deadline of August 18, 2026, with the solicitation being publicly posted on July 30, 2026. The place of performance and specific delivery location are not detailed in the provided data, but the materials are intended for use within Tennessee. All proposals must adhere to the specified product requirements, and no alternative brands or models will be accepted. Interested suppliers should review the official invitation to bid through the Tennessee Department of General Services procurement portal for full submission guidelines and technical specifications.
Other Metal Container Manufacturing

POSTED

8 days ago

DEADLINE

in 11 days
View Details
NAICS: 332312
SLED
Stainless-Steel Access Door SupplyThe contract involves the supply of BILCO Type J-3ALH20 stainless-steel access doors specifically for inlet structures, with no installation services required. The items must meet specified material and dimensional standards, and delivery is expected to align with the procurement timeline set by the Tennessee Department of General Services. This is a subcontract opportunity under NAICS code 332312, which corresponds to metal window and door manufacturing, indicating the need for precision fabrication and compliance with industrial-grade stainless-steel specifications. Bidders must submit responses by the deadline of August 18, 2026, following the solicitations process outlined by the Tennessee Central Procurement Office. The contract does not specify a set-aside designation, meaning it is open to all eligible suppliers without restrictions based on business size or ownership. Performance location details are not provided, but the equipment is intended for use in Tennessee state infrastructure projects. Interested parties should refer to the official procurement webpage for submission guidelines, technical requirements, and any additional documentation needed to qualify for award.
Fabricated Structural Metal Manufacturing

POSTED

8 days ago

DEADLINE

in 11 days
View Details
NAICS: 327320
SLED
Precast Concrete Manhole Risers and Tops ManufacturingThe contract entails the manufacturing of precast concrete risers and tops in full compliance with ASTM C478 specifications, requiring strict adherence to material, dimensional, and structural standards. All submitted shop drawings must be reviewed and formally approved prior to the commencement of production, ensuring design accuracy and regulatory alignment. The work is structured as a subcontract under the Tennessee Department of General Services, with the North American Industry Classification System code 327320 designating it as a precast concrete product manufacturing activity. The solicitation was posted on July 30, 2026, and responses are due by August 18, 2026, with performance expected to meet state procurement guidelines, though specific performance location details are not provided. The process emphasizes quality control and prior approval protocols to ensure uniformity and compliance across all delivered components.
Ready-Mix Concrete Manufacturing

POSTED

8 days ago

DEADLINE

in 11 days
View Details
NAICS: 424460
SLED
TWRA Pure Channel Catfish
Solicitation # 32801-13967
The Tennessee Department of General Services, through its Central Procurement Office, has issued a solicitation for Pure Channel Catfish under reference number 32801-13967, posted on July 30, 2026, with responses due by August 13, 2026. This procurement is targeted at suppliers providing pure channel catfish and is classified under state and local government procurement, with performance expected to occur within Tennessee. The solicitation does not specify a set-aside preference or NAICS code, indicating an open bidding process for qualified vendors. All inquiries and submissions must be directed to the Central Procurement Office via the provided email address, cpo.website@tn.gov, and additional details regarding submission guidelines and requirements are available on the official Tennessee General Services website.
Fish and Seafood Merchant Wholesalers

POSTED

8 days ago

DEADLINE

in 6 days
View Details
NAICS: 237990
SLED
Inlet Structure & Doors at TWRAs Lillards MILL
Solicitation # 32801-0000013964
The Tennessee Department of General Services is seeking bids for the construction of inlet structures and doors at TWRAs Lillards MILL, under solicitation number 32801-13964. This procurement is targeted at contractors capable of delivering specialized civil and structural components required for water management infrastructure, with work to be performed across various locations within Tennessee. The solicitation was posted on July 30, 2026, and responses are due by August 18, 2026, giving interested parties approximately three weeks to prepare and submit their proposals. The contract falls under the state and local government (SLED) category, and there is no specific set-aside designation indicated. All inquiries and submissions must be directed through the Central Procurement Office, reachable via email at cpo.website@tn.gov. The project’s place of performance is confined to Tennessee, and no specific city or zip code is listed, suggesting multiple sites may be involved within the state. The agency has not provided a NAICS code, nor has it specified any small business or minority set-asides, leaving the opportunity open to qualified vendors of all sizes. Bidders are expected to align with Tennessee’s procurement standards and should consult the official UI Link for detailed specifications, eligibility criteria, and submission requirements.
Other Heavy and Civil Engineering Construction

POSTED

8 days ago

DEADLINE

in 12 days
View Details
NAICS: 333992
SLED
Stainless Steel Wedge Wire Screen SupplyA subcontract has been issued for the supply of a 44x56 inch wedge wire screen constructed from Type 304 stainless steel, featuring a precise 0.375-inch slot size and a minimum open area of 72 percent up to 72.8 percent, designed to withstand a hydraulic differential of up to 12 feet. The screen includes laser-fused guide rails to ensure structural integrity and precise alignment during installation and operation. The solicitation was posted on July 27, 2026, with a response deadline of August 18, 2026, under the NAICS code 333992 for other commercial and service machinery manufacturing. The contract is procured by the Tennessee Department of General Services under its Central Procurement Office, and while the specific performance location is not detailed, it is expected to serve a state-level infrastructure or industrial application within Tennessee. Interested suppliers must submit responses prior to the deadline to be considered for award.
Welding and Soldering Equipment Manufacturing

POSTED

11 days ago

DEADLINE

in 11 days
View Details
NAICS: 332999
SLED
Stainless Steel Slide Gate Fabrication and SupplyA custom 36x48 inch slide gate fabricated from Type 304 stainless steel is being procured with precision-spaced, mechanically interlocked profile bars engineered to meet Hendrick Screen Company’s detailed specifications. The contract is issued as a subcontract under the NAICS code 332999, and the Tennessee Department of General Services is the contracting agency, with performance expected to align with their procurement standards. The solicitation was posted on July 27, 2026, and responses are due by August 18, 2026, requiring potential bidders to submit proposals within this window. All fabrication must adhere strictly to the mechanical and dimensional requirements outlined by Hendrick Screen Company, ensuring uniformity, durability, and operational precision. The place of performance and point of contact details are not specified, and the contract remains open to eligible subcontractors without any set-aside designation.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

11 days ago

DEADLINE

in 11 days
View Details