Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FILAMENT, ADDITIVE M

Active
SPE8E5-26-T-3827Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of 86 units of filament, additive M, under solicitation SPE8E5-26-T-3827, with a delivery requirement of 167 days from the award date and a mandatory delivery point of origin. The material is identified by NSN 9330-01-696-5540 and must be supplied by MATTHERACKERS, INC. with part number M-V12-08E7, conforming to reference drawing 5B5M3 11B5190923 Revision A dated 07/06/2022. Strict packaging requirements mandate heat-sealed vapor bags with desiccant to prevent moisture absorption, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization following DLA packaging standards. Any box with a short quantity must be labeled with a red X and “SHORT BOX” and placed on top of the pallet. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and the required ship date is February 1, 2027, though the original required delivery date was December 25, 2026. Technical and quality requirements are governed by the DLA Master List, and configuration change management procedures apply to materials from Edgewood Chemical Biological Center. Transportation details follow DLAD Proc Notes C19 and C20, and the unit of issue is each (EA), aligned with ANSI X12 standards.

General Info

86 units of filament additive M delivered by MATTHERACKERS, INC. to New Cumberland, PA by Feb 1, 2027, per strict MIL-STD and DLA requirements.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

327999 - All Other Miscellaneous Nonmetallic Mineral Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-3827.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
BRANDON WICKER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILAMENT,ADDITIVE M
FILAMENT,ADDITIVE M
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ003: CONFIGURATION CHANGE MANAGEMENT FOR EDGEWOOD FOR CHEMICAL,
BIOLOGICAL CENTER MATERIALS ENGINEERING CHANGE PROPOSAL REQUEST FOR
VARIANCE (DEVIATION OR WAIVER)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MATTERHACKERS, INC. 7JRL8 P/N M-V12-08E7
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 5B5M3 11B5190923 REVISION NR A DTD 07/06/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 5B5M3 11B5190923 REVISION NR DTD 03/15/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE8E5-26-T-3827
SECTION B
PR: 7017758229 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017758229 0001 EA 86.000
NSN/MATERIAL:9330016965540
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FILAMENT AND SPOOL SHALL BE PACKAGED IN A HEAT SEAM SEALED VAPOR BAG WITH DESICCANT PACK TO KEEP IT FROM ABSORBING MOISTURE.
PLACE A RED X AND THE WORDS “SHORT BOX” ON THE FRONT OF ANY BOX THAT HAS A SHORT QUANTITY, THEN PLACE THAT BOX/BOXES WITH THE MARKINGS SHOWING ON THE TOP FRONT OF THE PALLET LOAD.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
SPE8E5-26-T-3827
SECTION B
PR: 7017758229 PRLI: 0001 CONT’D
US
Need Ship Date:02/01/2027 Original Required Delivery Date:12/25/2026
SPE8E5-26-T-3827 NSN/Part Number: 9330-01-696-5540 Quantity: 86 EA Purchase Request: 7017758229QTY: 86 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7M2-26-T-5996
This contract, identified by solicitation number SPE7M2-26-T-5996, specifies the procurement of 175 knobby items with NSN 5355-01-033-2742 under full and open competition. All supplies must comply with DLA’s Packaging Requirements and technical quality standards referenced in the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds except for specified functional applications such as batteries, fluorescent lights, and certain instruments, which must include secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are banned entirely, and any substitute materials require prior approval. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with plastics avoided for wrapping, cushioning, or dunnage whenever possible. Palletization follows DLA packaging standards, and items must be identified with MIL-STD-130N markings per NASM91528 and NASM3926 specifications. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are verified at stringent levels. Delivery is FOB origin to DLA Distribution San Joaquin in Tracy, California, with a required delivery date 161 days from order and a need ship date of January 26, 2027. Inspection and acceptance occur at destination, with no variance permitted in quantity. The contract mandates compliance with all applicable DoD standards and specifies David Larsen as the primary point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SH
Solicitation # SPE8E5-26-T-3853
This contract specifies the procurement of a nonmetallic special shaped section, supplied on a 25-foot coil, with a required delivery quantity of 17 feet to be delivered within five days to Fort Hood, Texas. The item is identified by NSN 9390-01-179-4508 and purchase request number 7017745767, with a unit price of $17.00 per foot and a total price based on the contracted quantity. The product is classified as a critical application item, and its packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and marking per MIL-STD-129. Plastic wrapping, cushioning, or dunnage is to be avoided whenever possible, and packaging must prevent distortion during shipping and storage. Shipment must be made via traceable freight methods, excluding parcel post, and directed to a designated warehouse facility at Fort Hood. The contract incorporates all technical and quality requirements referenced by R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation or award date. Delivery is FOB origin with a 10% quantity variance allowed on the upper end and zero on the lower end, with inspection and acceptance occurring at the destination. The item is covered by defense information and subject to restrictions on government identification removal, and all markings and shipping documentation must align with specified codes and protocols.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL
Solicitation # SPE8E5-26-T-3854
The contract specifies the procurement of a nonmetallic special component with dimensions and shape compliant with Lockheed-Georgia standards, manufactured to meet Lockheed Standard Material Specification STM 23-402 Class 1 Grade 50. The item is subject to strict export control under either ITAR or EAR regulations, prohibiting any transfer, including disclosure to foreign persons regardless of location, without explicit authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this technical data, and distribution is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and approved access through the DLA questionnaire process. The item carries NSN 9390-00-055-4369 with a quantity of 67 LG units, and delivery is required within 167 days after award. The solicitation, identified as SPE8E5-26-T-3854, was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 327999. Performance will occur at Robins AFB, Georgia, with Nafis Beyah designated as the primary point of contact. The contractor must maintain CMMC Level 2 certification as verified by a certified third-party assessment organization.
WARNER ROBINS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL
Solicitation # SPE8E9-26-T-3306
This contract specifies the procurement of a nonmetallic special shaped section compliant with ASTM D2000 M 3 BE 610 A14 E014 F19 material standards, supplied in white color with a unit length of 10 feet. The total quantity ordered is 754 feet under purchase request 7017758063, with delivery required within 89 days after award. The item is identified by NSN 9390-00-603-7358 and is part of a solicitation issued by the Department of Defense through the Construction & Equipment MRO Service I office, with performance required at Tinker AFB, Oklahoma. The solicitation number is SPE8E9-26-T-3306, posted on August 5, 2026, with responses due by August 17, 2026. The contract incorporates technical and quality requirements from the DLA Master List, enforces DLA packaging standards, and mandates strict compliance with export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location. Access to controlled data is restricted to contractors with approved JCP certification, completed DOD export training, and DLA authorization. The supplier must be a CMMC Level 2 certified third-party assessment organization, and all data handling must adhere to DFARS 252.225-7048. The solicitation is a federal procurement under NAICS code 327999, with Matthew Kruc listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7L1-26-T-917L
This contract specifies the procurement of 249 units of a knob identified by NSN 5355-00-559-8943 under solicitation number SPE7L1-26-T-917L, with a response deadline of August 17, 2026, and a delivery requirement of 136 days after award. All items must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA packaging guidelines, and any non-accepted supplies must have government identification removed. Contractors are required to retain supply chain traceability documentation in accordance with DLA Directive Procurement Note C03 from August 2016. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be approved unless explicitly permitted by the specification. Items must be free of asbestos, and previously listed asbestos-containing codes or part numbers are no longer acceptable; any alternative materials require approval under Clause L30 and Provision 4 conditions. The contract is managed by the Department of Defense’s Land Supply Chain, with performance taking place in Jacksonville, Florida, and the primary point of contact is Kristie Fown.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
TAPE, REFLECTIVE
Solicitation # SPE8E5-26-T-3784
Reflective tape in red, 6 inches wide, is being procured under contract SPE8E5-26-T-3784 with a total quantity of 158 rolls, each containing 1,800 inches of material, for a total length of 284,400 inches. The unit of issue is RO (roll), and delivery is required within 61 days after the order, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging unless hazardous under FED-STD-313, in which case IP025 applies. All packaging and palletization must adhere to DLA’s RP001 requirements, and the DLA Master List of Technical and Quality Requirements supersede all other standards. The tape must meet TDP Rev A Gen 1 per ASTM D4956-19, with verification sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, where unspecified attributes are treated as major and acceptance requires zero non-conformances. The NSN is 9390009518833, and the procurement is under a Women-Owned Small Business Set-Aside with a response deadline of August 17, 2026. Deliveries must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with the required delivery date being November 22, 2026, and the need ship date set for August 5, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
POINTER, DIAL
Solicitation # SPE4A5-26-T-328B
The contract pertains to the procurement of a POINTER DIAL with NSN 5355-00-646-5376, quantity of 12 units, under solicitation SPE4A5-26-T-328B, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 500 days from the original required delivery date of July 13, 2027, with shipment FOB origin and inspection and acceptance occurring at the destination. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards, including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. Sampling protocols must align with MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted items. The item is designated as a Critical Application Item by Rolls-Royce Corporation, part number 6812620. Packaging and labeling must strictly follow DLA directives, and delivery must be sent to DLA Distribution Warner Robins at Robins AFB, Georgia. The unit of issue is each, with no variance allowed in quantity. The need ship date is April 15, 2025, and the solicitation response deadline was August 12, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 327999
New
DIBBS
KNOB ASSEMBLY
Solicitation # SPE7L1-26-T-916B
The KNOB ASSEMBLY is a defense-related item with the NSN 5355-01-461-8648, requiring a quantity of 619 units under purchase request 7017437748, with delivery expected within 66 days after order. The item is governed by strict export control regulations under either ITAR or EAR, meaning any transmission of associated technical data to foreign persons—even within the United States—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors certified under the US/Canada Joint Certification Program who have completed required DLA training and approved the export-controlled data questionnaire are permitted to access or handle the technical data. The solicitation number is SPE7L1-26-T-916B, posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 327999, and the procurement is managed by the Department of Defense’s Land Supply Chain through the DLA. The place of performance is New Cumberland, PA, 17070-5002, with Kristie Fown identified as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE4A5-26-T-322N
The contract pertains to the procurement of a knob identified by NSN 5355-01-101-3430, with a quantity of 18 units, under solicitation number SPE4A5-26-T-322N. Delivery is required within 64 days of the award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting standards, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow RP001: DLA Packaging Requirements for Procurement. The item does not require the use of Class I ozone-depleting substances. The unit of issue is each, with a unit price of $18.00 and a total contract value of $324.00. The delivery must be made to DLA Distribution Warner Robbins at Robins AFB, Georgia, using the specified parcel post and freight shipping addresses. The original required delivery date is January 1, 2027, with a needed ship date of October 16, 2026. All technical and quality specifications referenced are controlled by the DLA Master List revision effective on the solicitation issue date. The contract is managed by the ASC Supplier Operations OEM Division, with Anthony Nickens as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 327999
New
DIBBS
DIAL, CONTROL
Solicitation # SPE7L1-26-T-913W
This contract is for the procurement of one unit of a DIAL, CONTROL with NSN 5355-01-316-2328 under solicitation SPE7L1-26-T-913W, issued by the Department of Defense’s Land Supply Chain. The requirement is for delivery within five days after award, with responses due by August 17, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. The item must comply with DLA packaging standards and cannot contain mercury or mercury compounds unless explicitly exempted for functional uses such as in batteries, fluorescent lights, sensors, controls, weapon systems, or specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary as dictated by NAVSEA 5100-003D. The use of Class I ozone depleting substances is prohibited. The point of contact for the solicitation is Kristina Derry, with primary communication via email and phone provided, and the place of performance is designated as FPO with a ZIP code of 09573.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7L3-26-T-090B
The contract pertains to the procurement of a knob identified by NSN 5355-01-462-2416, with a total quantity of 196 units requested under purchase request 7017300686. The solicitation, numbered SPE7L3-26-T-090B, was posted on June 25, 2026, and responses are due by July 6, 2026. It falls under the NAICS code 332510, indicating classification within the industrial milling and turning product manufacturing sector, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation is open to federal procurement and does not specify any set-aside for small businesses or other categories. The place of performance and office address details are not provided, though the agency operates within the United States. Interested parties can access additional information through the provided DIBBS portal link.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in about 22 hours
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details