Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FILE, ROTARY

Active
SPE8E5-26-T-3787Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, issued under solicitation number SPE8E5-26-T-3787, pertains to the procurement of a rotary component identified by NSN 3455010232164 with a quantity of 1,480 units. The item must be delivered FOB origin within 167 days of contract award, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and packaging must strictly adhere to ASTM D3951 unless superseded by higher-priority DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must comply with MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The delivery destination is the DDSP New Cumberland Facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of February 1, 2027, and an original delivery deadline of December 24, 2026. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract includes provisions for covered defense information and mandates the removal of government identification from non-accepted supplies. The unit of issue is each (EA) at a unit price of $0.00, resulting in a total price of $0.00, reflecting a no-cost contract or placeholder pricing structure per DLA systems. The contracting activity falls under the Department of Defense, and the item is classified under NAICS code 333515. Key references and compliance standards are accessible via official DLA web portals, and any technical or quality requirements referenced by R or I numbers derive directly from the DLA Master List.

General Info

1,480 rotary components delivered FOB origin by Dec 24, 2026, to New Cumberland, PA, per DLA packaging and compliance standards.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333515 - Cutting Tool and Machine Tool Accessory ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-3787.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Don Trachtman
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILE,ROTARY
FILE, ROTARY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
GROUND FROM SOLID
SPECIFICATIONS OR COMMERCIAL ITEM DESCRIPTIONS
(CIDS) MAY BE OBTAINED FROM THE WEB SITE
http://quicksearch.dla.mil/ http://quicksearch.dla.mil/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
TDP Rev A Gen 1 IAW BASIC CID A-A-51152A NOT 3 REVISION NR A DTD 10/03/2022 PART PIECE NUMBER: AA51152-2C11B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017758400 0001 EA 1,480.000
NSN/MATERIAL:3455010232164
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE8E5-26-T-3787
SECTION B
PR: 7017758400 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:12/24/2026
SPE8E5-26-T-3787 NSN/Part Number: 3455-01-023-2164 Quantity: 1,480 EA Purchase Request: 7017758400QTY: 1480 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, DOME
Solicitation # SPE8E7-26-T-3492
The contract pertains to the procurement of 112 units of a light dome assembly identified by NSN 6220-01-563-0330 and part number 3630227, with OSHKOSH DEFENSE LLC as the sole acceptable source due to proprietary or insufficient data for competitive bidding. Delivery is required FOB origin within 167 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing these over ASTM D3951; if the item is non-hazardous, it must be commercially packaged per ASTM D3951, but if hazardous, it must follow FED-STD-313 and TQ requirement IP025. All packaging and labeling must adhere to MIL-STD-129 and palletization must conform to RP001. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is February 1, 2027, with the original delivery date set for December 15, 2026. The contract, issued under solicitation SPE8E7-26-T-3492, is governed by DoD procurement standards, and all technical and quality specifications referenced are sourced from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
INSERT, CUTTING TOOL
Solicitation # SPE8E5-26-T-3828
The contract is for the procurement of 621 units of an insert cutting tool with NSN 3455-01-624-4511 and part number TCMT-32.51-PEM-DPC25UT, issued under solicitation SPE8E5-26-T-3828 by DLA Dist San Joaquin. The unit price is $7017757297 per unit, totaling a contract value based on the specified quantity, with delivery required within 167 days from the award date, FOB origin. The delivery destination is DLA Warehouse 57 in Tracy, California, with inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951, but DLA Master List of Technical and Quality Requirements take precedence, and marking and labeling must follow MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement. The product must be delivered no later than February 1, 2027, with an original required delivery date of January 13, 2027, and no variance in quantity is permitted. Transportation logistics are governed by DLAD Proc Note C19 for transportation and C20 for first destination. The contractor is Dorian Tool Intl Inc, and the point of contact is Khue Nguyen. The requirement is tied to NAICS code 333515 and is a federal solicitation issued by the Department of Defense, with responses due by August 17, 2026.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
SLEEVE, EXPANSION MANDR
Solicitation # SPE8E5-26-T-3835
The contract pertains to the procurement of 284 units of a sleeve, expansion mandrel with NSN 3460-01-642-0661 and part number FTS-4-0-3-4 from FATIGUE TECHNOLOGY, INC, at a unit price of $284.00 for a total value of $80,656. Delivery is required within 167 days from the contract award, with shipment FOB origin and inspection and acceptance taking place at destination. The entire quantity must be delivered without variance, and all items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and packaging guidelines and be palletized in accordance with DLA’s RP001 procurement packaging requirements. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with a need ship date of February 1, 2027, and an original required delivery date of December 30, 2026. The contract, issued under solicitation SPE8E5-26-T-3835, falls under NAICS code 333515 and is governed by defense procurement protocols, including provisions for handling covered defense information and removal of government identification from non-accepted supplies. All packaging and labeling must reflect DLA standards, and transportation logistics are directed by DLAD procedures C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
KIT, CLAMPING
Solicitation # SPE8E5-26-T-3809
The contract pertains to the procurement of 27 kits of clamping hardware, identified by NSN 3460-01-369-1324 and part number CL-6-CK from Carr Lane Manufacturing Company, under solicitation SPE8E5-26-T-3809. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and must be packaged and labeled according to MIL-STD-129. Sampling inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The equipment is to be delivered FOB origin with no quantity variance allowed, inspected and accepted at destination, and shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. The required delivery date is January 24, 2027, with an allowance of 167 days for performance, and the original ship date is February 1, 2027. Packaging must meet DLA-specific palletization guidelines under RP001, and ozone-depleting substances are restricted. All documentation and compliance obligations are governed by DLA policy, with the contractor responsible for proper marking, labeling, and adherence to all referenced quality and technical standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
BRACKET, LIGHT RETEN
Solicitation # SPE8E7-26-T-3509
The contract pertains to the procurement of 32 units of BRACKET, LIGHT RETEN with NSN 6220-01-580-0604 under solicitation SPE8E7-26-T-3509, issued by the Defense Logistics Agency District San Joaquin. The unit price is $32.00 per unit, with a total contract value of $1,024.00, and delivery is required FOB origin within 167 days from the contract date, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing IP025, MIL-STD-129 for marking and labeling, and RP001 for packaging standards. If the item is non-hazardous per FED-STD-313, commercial packaging per ASTM D3951 is acceptable, but DLA requirements supersede all other standards. Palletization must follow DLA packaging guidelines, and the shipment must be delivered to the designated receiving warehouse at 25600 S Chrisman Road, Tracy, CA 95304-5000. The original required delivery date was October 20, 2026, with a need ship date of February 1, 2027. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333515, and all provisions including Covered Defense Information apply. Contact for inquiries is Kelly Mitchell at DLA District San Joaquin.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
FILE, ROTARY
Solicitation # SPE8E5-26-T-3786
The contract pertains to the procurement of tungsten carbide diamond cut fluting rotary tools with a shank diameter of 1/4 inch, cutter head diameter of 1/2 inch, and head length of 1 inch, identified by NSN 3455-01-009-6258 and purchase request 7017758409. A total quantity of 1,198 units is required to be delivered FOB origin within 167 days, with a required ship date of February 1, 2027, and an original delivery deadline of January 6, 2027. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance mandatory and precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA Packaging Requirements. The item is subject to Covered Defense Information provisions and must conform to CID A-A-51162A Revision A dated July 12, 2022. Inspection and acceptance occur at destination, with no variance allowed in quantity. Delivery is to Distribution Depot Puget Sound, Building 467, Bremerton, WA 98314-6001, with transportation protocols governed by DLAD Proc Note C19 and C20. The solicitation was issued under contract number SPE8E5-26-T-3786, with a response deadline of August 17, 2026, and is classified under NAICS code 333515.
PUGET SOUND

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
CUTTER, MILLING, END
Solicitation # SPE8E5-26-T-3796
The contract pertains to the procurement of a milling end cutter with NSN 3455-01-308-5695 and part number 30242, supplied by Johnson Carbide Products Inc, under solicitation SPE8E5-26-T-3796. A total of 211 units are required to be delivered FOB origin within 167 days, with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards, and sampling must follow MIL-STD-1916 or an equivalent zero-based plan with strict acceptance criteria: critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sample lots unless otherwise stated, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling, with palletization following RP001 DLA packaging guidelines. The item must be delivered to the designated receiving warehouse at 25600 S Chrisman Road, Tracy, CA 95304-5000, with a needed ship date of February 1, 2027, and original delivery deadline of October 19, 2026. Transportation and freight details are governed by DLAD Proc Notes C19 and C20. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 333515, managed by the Department of Defense through DLA District San Joaquin.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
CUTTER, MILLING, END
Solicitation # SPE8E5-26-T-3856
The contract specifies the procurement of a milling end cutter, identified by NSN 3455-01-293-0701 and part number KISR-1.5TP3-0 from KENNAMETAL INC, with a quantity of 30 units to be delivered FOB origin within 167 days of the award. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and must be strictly followed. Packaging and labeling must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and palletization must adhere to DLA guidelines. Sampling and inspection procedures are mandated to follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item must be marked with its material grade and all covered defense information protocols apply. Delivery is directed to DLA Dist San Joaquin in Tracy, CA, with inspection and acceptance occurring at the destination. The contract price is $30.00 per unit, totaling $900, and the unit of issue is each. The solicitation was issued under contract number SPE8E5-26-T-3856, with a response deadline of August 17, 2026, and the original delivery requirement is set for February 19, 2027.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
CUTTER, V-THREAD, TOO
Solicitation # SPE8E5-26-T-3778
The contract specifies the procurement of a V-thread cutting tool with a Type B spring or goose neck form tool holder, featuring a .3750 inch thick shank, .875 inch height, and 5.50 inch overall length, including a .8125 inch radial length forward threading tool and a clamping device. The tool must comply with CID A-A-51136-B10 standards and is identified by NSN 3455002558147. All items must meet applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition scale. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specific exemptions such as batteries, fluorescent lights, instrument sensors, weapon systems, and chemically specified reagents by NAVSEA, all of which must adhere to additional containment and safety protocols per NAVSEA 5100-003D. The requirement calls for 22 units to be delivered within 167 days FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination point. Packaging must conform to MIL-STD-2073-1E with specified methods including drying, wrapping, and cushioning materials designated as ZZ, using unit containers and intermediate containers as defined by packaging code U. Marking complies with MIL-STD-129 and includes no special marking codes. Palletization follows DLA packaging requirements, and the unit of issue is each (EA). The solicitation number is SPE8E5-26-T-3778, issued by the Department of Defense’s DDSP New Cumberland facility, with a response deadline of August 17, 2026. The NAICS code is 333515, and the primary point of contact is Amanda Bird, reachable via email and phone.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
WHEEL SET, ABRASIVE
Solicitation # SPE8E6-26-T-4042
The contract pertains to the procurement of a Wheel Set, Abrasive, identified by NSN 3460016298188 and part number AP100217, with a quantity of 14 thousand units to be delivered FOB origin within 167 days of contract award. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be packaged and labeled in accordance with MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement. The unit of issue is KT, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Delivery must be made to the DLA Distribution Red River facility in Texarkana, Texas, with a required ship date of February 1, 2027, though the original delivery requirement was October 14, 2026. The contract, issued under solicitation SPE8E6-26-T-4042, is bound by DLA procedures for transportation and freight, including specific notes C19 and C20, and must be addressed to the designated receiving location. The supplier, Sanitz Enterprises, Inc., must ensure all packaging and documentation meet federal specifications, and government identification must be removed from non-accepted supplies per RQ011. The contract is governed under NAICS code 333515 and falls under the Department of Defense, with primary point of contact being Kathleen Selover.
RED RIVER RECEIVING BLDG

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details