Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FILIFORM, URETHRAL

Active
SPE2DS-26-T-299HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of six units of a filiform urethral device measuring 12 inches nominal length with a 3FR specification, featuring a straight design, olive tip, and construction from dacron tu/metal material that is sterillizable. The item is identified by NSN 6515-01-162-2905 and must be supplied with clear specification of source and part number. Delivery is required within five days of award, under purchase request 7017694476. Technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements apply, with the version in effect on the solicitation issue date controlling. Packaging must comply with DLA procurement standards, and covered defense information may apply. Government identification must be removed from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-299H, was posted on August 2, 2026, with a response deadline of August 10, 2026. The contracting agency is the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, with performance located in Williamsburg, Virginia, and primary point of contact Dorothy Marquis.

General Info

Six 12-inch 3FR filiform urethral devices, sterilizable dacron/metal, delivery in five days, NSN 6515-01-162-2905.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

CHEATHAM ANNEX, WILLIAMSBURG, VA, 23185-5830, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-299H.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
DOROTHY MARQUIS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILIFORM,URETHRAL
FILIFORM,URETHRAL
12.000 INCHES NOMINAL; FILIFORM URETHRAL 3FR
12"LG STR OLIVE TIP DACRON TU/METAL DEVICE; ,,
STRAIGHT,OLIVE TIP,STERILIZABLE
UNIT OF ISSUE: EACH
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-162-2905 Quantity: 6 EA Purchase Request: 7017694476QTY: 6 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-297M
The contract specifies the procurement of surgical sponges that are radiopaque, white, gauged, and sized at 4 inches by 8 inches, with ten sponges per container and a unit of issue of 800 sponges per package. These sponges are intended for use in operating rooms and must have a shelf life of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. Strict labeling requirements mandate that all packaging include the manufacturer date, expiration or retest date, contract number, and lot number, in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial grade, sealed to protect contents from damage, and shipped in suitable exterior containers that ensure safe delivery at the lowest possible freight rate to the designated delivery point in APO, 09094-3219. If the product is not stored in a climate-controlled environment for a month or longer, the shelf life counter must be halved. All products must adhere to the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and bidders must provide the source and part number. The solicitation was issued under contract number SPE2DS-26-T-297M with a deadline for response on August 10, 2026, and requires delivery within 20 days after award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-299S
The contract solicits adhesive bandages specified as BANDAID 1 inch by 3 inches flesh sterile and elastic adhesive bandages with a central gauze pad, with a unit of issue of a package containing 100 each. The National Stock Number is 6510-00-761-5062, and the quantity required is three packages, to be delivered within 20 days of award to Fort Bliss, Texas, with the delivery address ending in 79918-2527. All medical acquisitions under this solicitation must comply with commercial packaging standards, requiring each unit to be sealed in a container that protects against damage and breakage, and all exterior shipping containers must ensure safe, cost-effective delivery via common carrier. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, with copies available through DLA Troop Support or their website. Bidders must specify the source and part number being supplied to ensure compliance with the technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, where revisions effective on the solicitation issue date or award date govern. The solicitation, identified as SPE2DS-26-T-299S, was posted on August 2, 2026, with a response deadline of August 10, 2026, under NAICS code 339113, managed by the Department of Defense’s Medical Supply Chain, with Tiffany Parker as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
CASSETTE, FILTER
Solicitation # SPE2DH-26-T-5704
The contract is for a single unit of a cassette filter with a 5.0 micron rating, 25mm disk size, identified by NSN 6640-01-492-5120, under solicitation SPE2DH-26-T-5704. The item must be supplied in compliance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to DLA packaging standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage during transit. Shipments must be placed in commercial exterior containers capable of safe delivery via common carrier at the lowest cost to the designated delivery point in Tampa, Florida. Bidders are required to specify the source and part number being offered, and all items must be marked in accordance with the Medical Marking Standard. The contract includes provisions for the removal of government identification from non-accepted supplies and potential application of covered defense information standards. Delivery is required within five days of award, and responses are due by August 10, 2026. The purchasing office is part of the Department of Defense, Medical Supply Chain FSH, with point of contact Tina Vu available for inquiries.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BUFFER SOLUTION, STA
Solicitation # SPE2DH-26-T-5688
The contract specifies the procurement of 30 packets of buffer solution powder, comprising 15 red packets for pH 4.01 and 15 yellow packets for pH 7.00, packaged in plastic cases for medical use. Each unit must be sealed in a suitable container to prevent damage or breakage and shipped in commercial exterior containers that ensure safe delivery at the lowest cost to the designated point. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number. The item has a non-extendable shelf life of 24 months, and no more than three months may have passed from manufacture to government delivery. The NSN is 6630-01-494-3676, and the contract number is SPE2DH-26-T-5688, with a 20-day delivery requirement. Bidders must provide the source and part number being supplied, and the procurement falls under DLA packaging and quality requirements, including compliance with the DLA Master List of Technical and Quality Requirements. Covered defense information may apply, and government identification must be removed from non-accepted supplies as per applicable standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
TEST LUNG, VENTILATOR
Solicitation # SPE2DS-26-T-298B
The contract pertains to the procurement of a 1-liter test lung device designed for use with all Impact and Zoll ventilator series 731 and 754M models, serving as a critical component in ventilator calibration and functionality verification. This item is listed under NSN 6515-01-608-7696 and is included within the broader Ventilator Calibration Kit identified by NSN 6515-01-606-1476, with a unit of issue specified as each. The procurement is governed by DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, where compliance is determined by the revision in effect on either the solicitation issue date or award date, depending on acquisition type. Bidders must clearly identify the source and part number being offered and adhere to the requirement that government identification be removed from non-accepted supplies. The solicitation, identified as SPE2DS-26-T-298B, was posted on August 2, 2026, with a response deadline of August 10, 2026, and is classified under NAICS code 339113 for medical equipment manufacturing. The contracting organization is the Department of Defense, specifically under the Medical Supply Chain MD Surg FSF, with a single point of contact provided for inquiries: Aidan Martz. Delivery is required within 20 days after delivery order issuance, and the purchase request number is 7017693318 for a single unit. The contract falls under a federal procurement pathway with no set-aside specified, and all bids must meet the technical, quality, and administrative criteria outlined in the associated DLA directives.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
TOURNIQUET, NONPNEUMATI
Solicitation # SPE2DS-26-T-300J
The contract pertains to the procurement of five nonpneumatic ratcheting tourniquets, model TX3, in olive drab green, each identified by NSN 6515-01-667-6208, with a delivery requirement of five days after order award. The solicitation, issued under number SPE2DS-26-T-300J, was posted on August 2, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense through the Medical Supply Chain MD SURG FSF. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Fort Lewis, Washington, with Dorothy Marquis listed as the primary point of contact. The NAICS code 339113 classifies this as medical equipment manufacturing, and the procurement is open under federal contracting procedures.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SHAVING KIT, HOSPITAL P
Solicitation # SPE2DH-26-T-5732
The contract is for the procurement of hospital patient shaving kits, each containing one disposable razor and one tube of shaving cream, packaged in units of 25 kits per pack (PG). The kits are intended for patient personal care in hospital settings and must comply with DLA’s packaging and marking standards, specifically Medical Marking Standard No. 1, which replaces MIL-STD-129. Each kit must be sealed in a protective unit container and packed in commercial exterior shipping containers suitable for safe delivery via common carrier at the lowest cost to the designated destination. The items are identified by NSN 6530-01-354-1156 and manufacturer part number DYKD2001S from MEDLINE INDUSTRIES, LP. Delivery is required within five days FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The contract is subject to DLA’s technical and quality requirements referenced from the Master List, and all material must be marked and packaged in accordance with specified defense and medical standards. The solicitation number is SPE2DH-26-T-5732, with a response deadline of August 10, 2026, and the place of performance is Travis AFB, CA. The federal agency managing the acquisition is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESI
Solicitation # SPE2DS-26-T-294Z
The contract specifies the procurement of sterile adhesive skin closure strips measuring 0.25 by 3 inches, supplied in packs of 150 strips total, with each envelope containing three strips and fifty envelopes per box. The strips are available with two alternate backings: polypropylene film or nonwoven nylon fabric, both porous and designed for surgical use. The product must have a non-extendable shelf life of exactly 36 months, and no more than five months may have elapsed between the date of manufacture and the date of delivery to the government. All labeling must conform to the latest revision of Medical Marking Standard No. 1, including the date of manufacture, expiration or retest date, and contract or lot number. Packaging must meet commercial standards with each unit sealed in a protective container and shipped in suitable exterior shipping containers to ensure safe, cost-effective delivery to Davis Monthan AFB, Arizona. The item is identified by NSN 6510-00-913-5874, with a quantity of five packs required under solicitation SPE2DS-26-T-294Z, and delivery must be completed within 20 days of award. Bidders must provide the source and part number being offered, and the acquisition is subject to all applicable DLA technical and quality requirements listed in the DLA Master List, with compliance enforced under Federal procurement guidelines.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
LITTER, RIGID, SEA-AIR, M
Solicitation # SPE2DS-26-T-296E
The contract is for the procurement of two rigid sea-air medical evacuation litters, identified by NSN 6530-01-187-0104, with a required delivery within 20 days of award. Each litter measures 80 inches in length and 16.5 inches in width, featuring a stainless steel or corrosion-resistant metal frame with a cloth stretcher and an urethane-coated carrying case. The design allows the litter to be folded in half, hoisted vertically or horizontally, backpacked, and carried without the use of hands, making it suitable for transport into confined spaces. The unit is orange in color and must meet stringent material specifications, including the prohibition of intentional introduction of mercury or mercury-containing compounds, except for approved exceptions such as functional components in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable devices containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List, with the applicable revision determined by the solicitation or award date. Bidders must provide the source and part number being offered, and the contract is issued under solicitation SPE2DS-26-T-296E by the Department of Defense’s Medical Supply Chain, with performance located in Jacksonville and a response deadline of August 10, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
GOWN, OPERATING, SURG
Solicitation # SPE2DH-26-T-5694
The contract is for the procurement of adult surgical gowns in X-large, extra-long size with an A-line design, full back, full length, waist tie, long raglan sleeves, and white elastic cuffs, all in blue, sterile, disposable, and fluid-resistant, constructed from plastic polypropylene SMS material meeting AAMI Level 4 standards. Each gown is accompanied by a hand towel, and the unit of issue is a case containing sixteen gowns. The product must have a shelf life of 60 months, with no more than nine months elapsed from the date of manufacture to the date of delivery to the government. Packaging and technical requirements are governed by DLA standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced under RP001, RA001, and RQ011, which dictate packaging, quality controls, and the removal of government identification from non-accepted supplies. The item is identified by NSN 6532-01-730-7599 with a total quantity of eight cases required under purchase request 7017405710, with delivery due within twenty days after award. The solicitation, issued under SPE2DH-26-T-5694, was posted on August 2, 2026, with responses due by August 10, 2026, and is targeted for performance at Fort Detrick, Maryland, under the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-296Y
The contract calls for the procurement of sterile, hypoallergenic adhesive bandages, specifically TELFA ISLAND DRESSINGS, measuring 4 inches by 4 inches, supplied in white and packaged in eight boxes of twenty-five bandages each, totaling two hundred units per package. The item is identified by NSN 6510-01-171-9722 with a single purchase request and a required delivery within twenty days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and all supplies must be free of government identification if not accepted. The solicitation, issued under SPE2DS-26-T-296Y, requires bidders to clearly state the source and part number being offered. The procurement is managed by the Department of Defense’s Medical Supply Chain, with performance located at Fort Bragg, North Carolina. The solicitation opened on August 2, 2026, and responses are due by August 10, 2026, with a primary point of contact provided for inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
FUNNEL, COMMON, LABORATO
Solicitation # SPE2DS-26-T-299G
The contract specifies the procurement of two plastic laboratory funnels with a 58mm diameter, intended for use with Taylor phosphate and nitrate test kits. The item is identified by NSN 6640-00-165-5851 and is to be delivered within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date, depending on the acquisition type. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE2DS-26-T-299G, issued on August 2, 2026, with responses due by August 10, 2026. The contracting office is under the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance occurring at FPO 09520. The primary point of contact is Olusola Emmanuel, reachable via email and phone as listed. The NAICS code 339113 classifies this as manufacturing of medical and dental instruments and supplies.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
TAPE, ATHLETIC
Solicitation # SPE2DS-26-T-299M
Athletic tape, 2.75 inches wide and 30 yards long, in beige color, made with breathable foam and nonsterile, is being procured under NSN 6515-01-714-2078 with a quantity of two boxes, each containing twelve units. The product must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date based on acquisition size. Packaging must meet DLA standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation, identified as SPE2DS-26-T-299M, was posted on August 2, 2026, with a response deadline of August 10, 2026, and requires delivery within twenty days after order. The purchase request is 7017609499, and the place of performance is Fort Bragg, North Carolina, under the Department of Defense’s Medical Supply Chain. The NAICS code is 339112, and the procurement is managed by the Federal agency for medical surgical supply.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CUFF SET, SPHYGMOMANOME
Solicitation # SPE2DS-26-T-294Y
The contract is for the procurement of four small adult aneroid sphygmomanometer cuff sets, each fully equipped with an inflation bulb, valve, one-piece inflation tube, and a shock-resistant, gear-free, latex-free reusable cuff-mounted aneroid gauge certified to an accuracy of ±3 mm Hg with a five-year warranty. The device must withstand drops from a height of 30 inches in compliance with AAMI standards and is designed for durability and reliability in clinical use. All components are specified to meet exact technical and quality criteria outlined in the DLA Master List of Technical and Quality Requirements, with packaging governed by DLA standards and requirements for removal of government identification from non-accepted supplies. The unit of issue is each, and bidders must clearly state the source and part number being offered. The item is identified by NSN 6515-01-648-3774 under solicitation SPE2DS-26-T-294Y, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF for delivery to Fort Hood, Texas, with a required delivery timeline of 20 days after order. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The NAICS code 339112 applies to medical equipment manufacturing, reflecting the specification and procurement intent under federal acquisition regulations. Bidders are expected to comply with all DLA packaging, identification, and technical compliance requirements as referenced in the solicitation, and no set-asides are indicated for this procurement.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 622110
New
DIBBS
PAPER, ELECTROCARDIO
Solicitation # SPE2DS-26-T-296Q
The contract is for the procurement of electrocardiogram recording paper, specifically a 19.6-foot roll with a red grid pattern, designated by NSN 6515-01-586-1986 and manufacturer part number 989803138171 from Philips Medical Systems. The unit of issue is the package (PG), with each package containing ten individual rolls, and the total quantity required is three packages, equivalent to thirty rolls. Delivery is required within five days to the U.S. Naval Hospital in Guam, FOB destination, with no variance allowed in quantity. The product is regulated by the FDA, and bidders must clearly indicate the country of origin and part number being supplied. All packaging must comply with commercial standards as specified in the procurement document, including sealed unit containers to prevent damage and commercial shipping containers suitable for safe transport at the lowest cost. Medical Marking Standard No. 1 supersedes MIL-STD-129 and must be followed for labeling, with copies available through DLA Troop Support. The item is intended for use with the 6515-01-582-4072 defibrillator/monitor-recorder system. Technical and quality requirements referenced in the contract are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract also includes specific transportation instructions, government-use identifiers, and procurement details tied to the solicitation number SPE2DS-26-T-296Q, with a response deadline of August 10, 2026, and an original required delivery date of August 4, 2026.
General Medical and Surgical Hospitals

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TOURNIQUET, NONPNEUMATI
Solicitation # SPE2DS-26-T-298Z
The nonpneumatic tourniquet is a medically validated device designed to completely occlude blood flow in upper and lower extremities, verified through scientific methods at the U.S. Army Institute for Surgical Research. It features a one-handed, single-route buckle system with a reinforced windless and windless clip mechanism to ensure secure and rapid application. A reinforced stabilization plate with a beveled contact bar minimizes skin pinching, while a grey time tape and Velcro secure strap provide additional functionality and ease of use. The device is black in color with a red elliptical tip to assist users in locating and threading the strap during emergency application, and once applied, it locks in place via multiple clips for fail-safe retention. It is issued as a single unit and meets strict technical and quality standards as defined by the DLA Master List of Technical and Quality Requirements. This procurement under contract solicitation SPE2DS-26-T-298Z requires two units with delivery expected within five days of award, performed at Fort Bliss, Texas. The National Stock Number is 6515-01-521-7976 and the purchase request number is 7017693171. Bidders must clearly state the source and part number being offered. The solicitation is governed by DLA packaging requirements, applies to covered defense information, and mandates removal of government identification from non-accepted supplies. The contract falls under NAICS code 339112, is managed by the Department of Defense’s Medical Supply Chain, and the primary point of contact is Olusola Emmanuel. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
SHEARS, TRAUMA
Solicitation # SPE2DS-26-T-296C
The contract calls for two units of trauma shears, specifically 7.5 inch models with coyote brown handles and black titanium coated stainless steel blades featuring a blunt tip, designed for heavy-duty use. These shears are designated under NSN 6515-01-702-8905 and must be supplied with clear identification of the source and part number as required by the bidder. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue or award date depending on procurement scale. The item falls under packaging requirements specified by DLA and is subject to protocols for removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-296C, was posted on August 2, 2026, with a response deadline of August 10, 2026. Delivery must be completed within 20 days after delivery order, to Fort Campbell, 42223-5000, under the Department of Defense’s Medical Supply Chain. The primary point of contact for inquiries is Dorothy Marquis, reachable via email or phone as listed.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BLADE, SURGICAL PREPARA
Solicitation # SPE2DS-26-T-300K
The contract pertains to the procurement of surgical preparation blades made of carbon steel, specifically single-edge, straight, 50S type, sourced from Pilling Surgical, Inc. (part number 450205) and American Safety Razor Co. (part number 74-0001), with the unit of issue being a package (PG) of 50 blades. The item is regulated by the FDA, requiring the contracting official to submit a referral in EBS to the product specialist, including manufacturer details, part number, and bidder information. Packaging must comply with commercial standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129, with containers required to protect against damage and ensure safe delivery via common carrier at the lowest cost. All packaging and marking must meet DLA requirements, and the material is subject to Covered Defense Information provisions. The NSN is 6515-01-147-0210, with a single package quantity of 1 PG under purchase request 7017701239. Delivery is mandated within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract is issued under solicitation SPE2DS-26-T-300K, with a response deadline of August 10, 2026, and the place of performance is WaterVliet, NY, 12189-5000. The NAICS code is 339112, and the procurement is for the Department of Defense through its Medical Supply Chain division.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CLAMP, TUBING, REGULATIN
Solicitation # SPE2DS-26-T-294F
The contract calls for 8 packages of ratcheting plastic tubing clamps, each package containing 25 units, for a total of 200 clamps. Each clamp is 4.3 inches long, non-sterile, disposable, and designed to occlude tubing with an outer diameter between 1 and 8 mm, featuring smooth jaws and finger rings for easy handling. The item is identified by NSN 6515-01-614-0551 and must be supplied with the source and part number clearly specified by the bidder. Packaging requirements mandate that each unit be sealed in a protective container to prevent damage and that all shipments be packed in commercial exterior containers suitable for safe transport via common carrier at the lowest possible rate to the delivery point at Fort Hood, Texas. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of the standard are available through DLA Troop Support. The solicitation, issued under SPE2DS-26-T-294F, incorporates technical and quality requirements from the DLA Master List, and the revision in effect at the solicitation issue date controls compliance. The contract was posted on August 2, 2026, with a response deadline of August 10, 2026, and delivery must be completed within 20 days of award. The purchasing agency is the Department of Defense, Medical Supply Chain MD Surg FSF, with Michael Small as the primary point of contact.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIUM, MOTI
Solicitation # SPE2DS-26-T-297C
The contract specifies the procurement of Culture Medium for Motility Determination, identified by NSN 6550-01-732-8840, in a format of 15mm x 103mm tubes containing TTC indicator, with each package comprising twenty 5 mL units. The unit of issue is PG, and the order quantity is two PG. The item must have a shelf life of twelve months, non-extendable, with no more than one month elapsed between the date of manufacture and the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, including clear markings for the date of manufacture, expiration or retest date, and the contract or lot number, in accordance with the latest MMS1C revision. The product requires refrigerated storage between 2 to 8 degrees Celsius and must not be frozen. Packaging must be commercial-grade, sealed, and designed to prevent damage during transit, with shipping containers chosen to ensure safe and cost-effective delivery to the specified point of performance in Williamsburg, Virginia. The item is subject to Defense Logistics Agency packaging requirements and the removal of government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation issue date. Bidders must provide the source and part number of the item being offered, and the response deadline is August 10, 2026, with delivery required within five days after order award.
Family Planning Centers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 456199
New
DIBBS
PAPER, MEDICAL RECORDIN
Solicitation # SPE2DS-26-T-298U
The contract specifies the procurement of medical recording paper intended for use with Propaq MD and X defibrillator monitor systems, with each unit consisting of a box containing six individual sheets. The packaging must comply with commercial standards outlined in the procurement documentation, requiring each complete unit to be sealed in a container that safeguards against damage or breakage, and all units must be shipped in exterior containers suitable for safe transport by common carriers at the lowest available rate to the designated delivery point. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must reference the NSN/Part Number 6515-01-628-6597 while clearly identifying the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within 20 days after order, under solicitation SPE2DS-26-T-298U, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance located at Tinker AFB, Oklahoma, and primary point of contact Marc Canalichio.
All Other Health and Personal Care Retailers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
TUBE, DRAINAGE, SURGI
Solicitation # SPE2DS-26-T-294A
The contract specifies the procurement of 4 packaging groups, each containing 10 sterile, disposable thoracic drainage tubes, totaling 40 units. Each tube is 28 FR, radiopaque, straight, and designed for surgical use, with a required shelf life of 60 months that cannot be extended. The item is identified by NSN 6515-00-763-7367 and must comply with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, as referenced by R and I numbers. Packaging must adhere to DLA specifications, and all non-accepted supplies must have government identification removed prior to return. The contract includes provisions for covered defense information and requires bidders to clearly specify the manufacturer’s core and part numbers. The solicitation, issued under SPE2DS-26-T-294A, was posted on August 2, 2026, with responses due by August 10, 2026. Delivery is due within 20 days of award, with performance located at Fort Hood, Texas. The procurement falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain, with Chandler Alvarez as the point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details