Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FILTER ASSEMBLY, WAT

Active
SPE8E8-26-T-4942Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one FILTER ASSEMBLY, WAT with NSN 4610-01-414-2298 under solicitation SPE8E8-26-T-4942, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96672 with FOB destination terms, and inspection and acceptance occur at the delivery point. The item must comply with MIL-STD-2073-1E packaging standards, including specific packaging methods, containment codes, and marking per MIL-STD-129 without special identifiers. Palletization must meet DLA packaging requirements, and shipping must use traceable freight methods, explicitly prohibiting parcel post. The contract enforces strict zero-defect sampling protocols per MIL-STD-1916 or equivalent zero-based plans, where critical, major, and minor attributes are verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances unless explicitly modified by the contract, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. The contract incorporates cybersecurity requirements mandating CMMC Level 2 self-assessment compliance and applies Covered Defense Information protocols. It prohibits the intentional introduction of mercury or mercury-containing compounds into the product or its contact surfaces, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific naval reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The unit of issue is EA, with no quantity variance permitted, and delivery is tied to project ZH9 TP 2 with a required delivery date of August 4, 2026. All supplies must be furnished in strict alignment with DLA documentation, and vendor communications must follow designated points of contact and shipping instructions.

General Info

Procure one FILTER ASSEMBLY, WAT NSN 4610-01-414-2298, deliver by Aug 4, 2026, CMMC Level 2 compliant, zero-defect inspection, no mercury except exceptions.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

UNIT 100202 BOX 1, FPO, AP, 96672, US

Set-Aside

NONE

Documents

(1)

SPE8E8-26-T-4942.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILTER ASSEMBLY,WAT
FILTER ASSEMBLY,WAT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING "OPEN SOLICITATION ONLY". TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)> FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
SPE8E8-26-T-4942
SECTION B
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
TDP Rev A Gen 1 IAW BASIC DRAWING NR 53711 6777122 REVISION NR J DTD 02/10/2011 PART PIECE NUMBER: 531-6777122 ASSY 97
TDP Rev A Gen 1 IAW REFERENCE QAP 14153 EQ003 REVISION NR A DTD 09/10/1998 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017707841 0001 EA 1.000
NSN/MATERIAL:4610014142298
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE8E8-26-T-4942
SECTION B
PR: 7017707841 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
N23160
USS MOMSEN DDG 92
UNIT 100202 BOX 1
FPO AP 96672
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N23160
USS MOMSEN DDG 92
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2316062090429
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V3B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE8E8-26-T-4942 NSN/Part Number: 4610-01-414-2298 Quantity: 1 EA Purchase Request: 7017707841QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
LEVEL
Solicitation # SPE7L4-26-T-5963
This contract pertains to a single unit of an item identified by NSN 1005-01-191-8726, solicited under SPE7L4-26-T-5963 by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within five days of award, and responses must be submitted by August 14, 2026. The contract mandates CMMC Level 2 certification for the contractor as a Certified Third-Party Assessment Organization, ensuring compliance with stringent cybersecurity standards. Technical and quality requirements referenced in the DLA Master List are incorporated by reference and govern performance, with revisions tied to the solicitation or award date depending on acquisition size. The item is subject to demilitarization requirements under Category I munitions regulations, and applicable export control laws including ITAR and EAR strictly prohibit unauthorized disclosure or transfer of technical data to foreign persons, regardless of location. Contractors must hold US/Canada JCP certification, complete mandatory DLA training and questionnaire, and receive formal approval to access controlled data. Packaging must comply with DLA standards, configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. Inspection occurs at origin, and physical marking of bare items is required. The primary point of contact is Kristen Elliott, reachable via email and phone for inquiries.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
FILLER NECK, VEHICUL
Solicitation # SPE7L1-26-T-906Z
The contract specifies the procurement of one filler neck for vehicle use under solicitation SPE7L1-26-T-906Z, with a required delivery within five days of award, delivered FOB origin. The item is identified by NSN 2590016923152 and part number 7017707038, and must comply with multiple technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over all other specifications including ASTM D3951. The product must be manufactured in accordance with designated technical data packages tied to specific reference drawings dated between 2019 and 2024, and the use of Class I ozone-depleting chemicals is strictly prohibited, with any substitutes requiring prior approval. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging requirements, with unit packaging following the specified QUP and palletization rules. The item must be shipped via traceable freight methods, excluding parcel post, to the designated delivery point at 9922 Beumont Road, Building 122, Indianapolis, IN 46216-1091, marked with the government identifier W90XJU and shipment control codes including RDD N and PROJ TP 1. The required delivery date is July 31, 2026, and the contract is governed by Department of Defense procedures under the NAICS code 333310, administered by the Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
STAND, PLUGGER TIP
Solicitation # SPE2DH-26-T-5744
The item specified is a Stand, Plugger Tip designed to hold up to six pluggers for use with Heat Carrier endodontic units, used in dental procedures. It is classified under NSN 6520-01-556-1436 with a quantity of four units required, and delivery is mandated within 20 days of award. The contract is issued under solicitation number SPE2DH-26-T-5744, with bids due by August 10, 2026, and the NAICS code 333310 applies to this medical equipment procurement by the Department of Defense’s Medical Supply Chain FSH. The solicitation incorporates technical and quality requirements from the DLA Master List, applicable based on the solicitation or award date depending on acquisition size, and includes packaging requirements per RP001, mandates removal of government identification from non-accepted supplies under RQ011, and indicates potential application of Covered Defense Information under RD003. Bidders must clearly state the source and part number being supplied. All offers must be submitted through the DIBBS platform with primary point of contact Tina Vu at DLA, reachable via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333310
New
Federal
PATIENT MEAL DELIVERY SYSTEM
Solicitation # 36C25026Q0765
The Department of Veterans Affairs, through the 250-NETWORK Contract Office 10 in Dayton, Ohio, is soliciting a turnkey Patient Meal Delivery System for the Louis Stokes Cleveland Veterans Affairs Medical Center in Cleveland, Ohio, under solicitation number 36C25026Q0765. This Request for Quotation, issued on July 23, 2026, requires offerors to provide a fully integrated trayline system that includes a 4–5 well hot food server, gravity shelf system, refrigerated and non-refrigerated tray tables, B-Cool refrigerated storage, and mobile tray/plate dispensers. All equipment must be new, commercially available, NSF-certified or equivalent, UL-listed, constructed of stainless steel or corrosion-resistant materials, and fully compliant with FDA Food Code and healthcare sanitation standards. The system must operate within existing facility utilities without requiring major construction, and the contractor is responsible for removing and disposing of legacy equipment, coordinating with VA Engineering for any minor utility adjustments, and completing full installation and commissioning within 90 calendar days of award. Delivery must be F.O.B. destination to the specified medical center location, with inspection and acceptance occurring on-site by the Government’s Contracting Officer’s Representative. Proposals must be submitted electronically by August 10, 2026, at 5:00 PM EST to Rachelle Hamer at rachelle.hamer@va.gov, with the subject line “RFQ 36C25026Q0765|Trayline,” and must include detailed technical documentation such as manufacturer brochures, cut sheets, and specifications to demonstrate compliance with all salient characteristics. Offerors must also provide an authorized distribution letter confirming OEM authorization and submit pricing for each item in the line-item table, which remains blank for offeror completion. Evaluation will be based on a Best Value Tradeoff methodology, with Technical capability being the most significant factor, followed by Past Performance and Price, where higher-priced proposals may be selected if they offer superior technical value. All offerors must be registered in SAM with a valid Unique Entity ID, and no small business set-asides are used; the NAICS code is 333310 with a size standard of 1,000 employees. Contract clauses from FAR and VA supplements are incorporated by reference, including requirements for ethical conduct, labor standards, the Buy American Act, and warranty provisions. No
250-NETWORK Contract Office 10 (36C250)

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333310
New
Federal
Microscope stage incubator for Nikon Ti/Ti2 inverted microscope system
Solicitation # 75N98026Q00927
The National Institutes of Health, Office of the Director, is seeking competitive bids for a commercial microscope stage incubator and an add-on laser safety kit for the Nikon Ti/Ti2 inverted microscope system under solicitation number 75N98026Q00927. This acquisition is conducted under FAR Subpart 12.6 as a streamlined commercial item solicitation, not exceeding the simplified acquisition threshold of $350,000, and is open to full and open competition without any small business set-aside. The NAICS code is 333310 with a size standard of 1,000 employees, and all offerors must be actively registered in SAM with a valid UEI, TIN, and business size certification. Proposals must include detailed pricing, delivery terms, F.O.B. point, product identifiers, and a completed FAR 52.212-3 form, along with sufficient information to demonstrate technical capability. The government will evaluate offers based on technical capability, price, past performance, and delivery schedule, with additional consideration given to warranty, lifecycle cost, maintenance, and environmental factors. Contracts will be awarded to the offeror providing best value, and a written award notice constitutes a binding agreement. All responses are due by August 13, 2026, at 9:00 AM Eastern Time and must be submitted electronically to James Law at James.Law@nih.gov.
National Institutes Of Health Olao

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
Federal
46--DI/RO WATER FILTER CANISTERS
Solicitation # 140G0226Q0110
This contract is a Small Business Set-Aside Blanket Purchase Agreement (BPA) under solicitation number 140G0226Q0110, issued by the Department of the Interior’s Office of Acquisition and Grants in Denver, Colorado, targeting the supply of 14-inch Carbon and Mixed Bed Deionizer (DI) filter canisters for the USGS Upper Midwest Environmental Sciences Center in La Crosse, Wisconsin. The BPA has a one-year performance period from August 17, 2026, to August 16, 2027, with an annual expenditure ceiling of $12,000 and no minimum order requirement. Vendors are required to provide regenerated filter tanks through a core exchange program, maintaining ownership of all tanks while offering same-day or next-day regeneration services with a strict 48-hour delivery commitment upon request. Deliveries must be made F.O.B. destination during receiving hours of 7:00 a.m. to 3:30 p.m. Central Time, Monday through Friday, with 24-hour advance notice required, and all shipments must include a packing list and core credit documentation. Evaluation will prioritize vendor capability—particularly individual canister regeneration and consistent 48-hour delivery performance—followed by proven past performance in Wisconsin counties including La Crosse, Vernon, Monroe, Jackson, Trempealeau, and Eau Claire, with price serving as the deciding factor only if technical proposals are equally meritorious. Payment is managed through the Invoice Processing Platform for orders over $15,000 and via Governmentwide Commercial Purchase Card for smaller amounts, with no use of WAWF. The contracting officer is Mary Wilson, who along with Mark Goede are the only authorized personnel to issue BPA calls. The solicitation incorporates standardized FAR clauses, all modified by a March 2026 deviation, including whistleblower protections, human trafficking prohibitions, service contract act compliance, and small business program requirements, while requiring participants to hold a valid SAM.gov UEI and qualify as a small business under NAICS 333310 with a 1,000-employee size standard. All proposals must be submitted electronically via email by August 7, 2026, and include a completed SF-1449 form along with an Excel-based pricing schedule. No MIL-STD packaging standards are referenced, and traceability of regeneration history, test results, and lot numbers
Ofc Of Acquisition Grants-Denver

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
Federal
Nikon NSPARC Detector Upgrade for Existing Nikon AXR Confocal Microscope System
Solicitation # 75N98026Q00924
The National Institutes of Health, through its Office of Acquisition and Logistics Management, intends to award a non-competitive contract to Nikon Instruments Inc. for the upgrade of an existing Nikon AXR confocal microscope system with a Nikon NSPARC detector. This procurement is classified under NAICS code 333310 and is being conducted under the Federal Acquisition Regulation’s Simplified Acquisition Procedures, with an estimated value not exceeding $350,000. The upgrade is essential to enhance imaging sensitivity, spatial resolution, and signal-to-noise ratio for live-cell imaging studies conducted by the NICHD’s Division of Developmental Biology, allowing researchers to maximize the utility of the government’s existing microscope infrastructure while reducing photobleaching and phototoxicity during sensitive experiments. The acquisition is authorized under FAR subpart 13.106-1(b)(1) permitting single-source negotiation without competition, and all provisions of FAC 2026-01 will apply. Interested parties may submit capability statements, technical proposals, cost-price proposals, period of performance details, Unique Entity ID, Taxpayer Identification Number, and business size certification to the government by August 13, 2026, at 9:00 a.m. Eastern Time, through electronic submission only to the contracting officer at James.Law@nih.gov. All respondents must maintain an active registration in SAM.gov. While this is a presolicitation notice and not a competitive request, the government retains full discretion to determine whether to proceed non-competitively based on responses received or to initiate a competitive process. The contract will be performed at the NIH campus in Bethesda, Maryland, and only responses referencing solicitation number 75N98026Q00924 will be considered.
National Institutes Of Health Olao

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
GRAM STAINING KIT
Solicitation # SPE2DS-26-T-297B
The Gram Staining Kit is a four-component diagnostic reagent set containing 250 mL each of Gram Crystal Violet Solution, Gram Iodine Solution, Gram Decolorizer Solution, and Gram Safranin Solution, packaged as a single unit. Each container must be clearly labeled with the lot or control number and date of manufacture, prefixed with "MFD". The item has a non-extendable 12-month shelf life under Type I (Code H) requirements and is regulated by the FDA, requiring prior referral to a product specialist through EBS with full manufacturer and bidder details. It is classified as a hazardous material, mandating compliance with 49 CFR and ICAO packaging regulations, along with the inclusion of a current Material Safety Data Sheet (MSDS) with every shipment. The MSDS must also be electronically submitted to DLA.MSDS@DLA.MIL with the prescribed DOD HMIRS cover sheet. Packaging must meet all DLA requirements and remove government identification from non-accepted supplies. The item is identified by NSN 6550-01-332-4770, solicited under SPE2DS-26-T-297B with a delivery deadline of 20 days after award, and is procured for the Department of Defense through the Medical Supply Chain MD Surg FSF office.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 333310
New
DIBBS
CAMERA, STILL PICTUR
Solicitation # SPE8EN-26-T-2760
The contract, identified by solicitation number SPE8EN-26-T-2760, pertains to the procurement of one unit of a still picture camera with NSN 6720-01-698-8910 and part number 3924C001AA from Canon U.S.A., Inc., under a simplified acquisition. Delivery is required within 20 days to the origin point via FOB origin terms, with zero tolerance for quantity variance. The item must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, including specific packaging codes and methods outlined in DLA’s packaging requirements. The equipment must be palletized as per DLA standards and shipped to the Distribution Management Office at Camp Kinser, Japan, with no special marking required. Inspection and acceptance occur at destination, and all technical and quality requirements referenced in the DLA Master List apply, though no approved technical data package exists for this NSN, so submissions to DLA Troop Support for technical data are prohibited. The required delivery date is August 5, 2025, with the original response deadline set for August 13, 2026, and the procurement falls under NAICS code 333310. The contract includes transportation protocols as defined in DLAD Proc Notes C19 and C20, and the point of contact for inquiries is Kirk Borowski, with government-use data indicating federal distribution and forward contracting status.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
ANTI-REFLECTION DEV
Solicitation # SPE7M1-26-T-244C
This contract pertains to the procurement of an anti-reflection device identified by NSN 1240-01-654-6250 and part number MA303, with a quantity of 37 units, each priced at $37.00, resulting in a total value of $1,369. The item is designated as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere strictly to MIL-STD-129 for marking and labeling and to RP001 DLA Packaging Requirements for Procurement, with palletization carried out according to specified guidelines. The unit of issue is each (EA), with zero variance allowed in quantity. Delivery is due in 266 days from the contract date, with FOB origin terms and inspection and acceptance both occurring at the destination. The required delivery date is May 7, 2027, with no flexibility in timing. The item must be shipped to the designated DLA Distribution facility at New Cumberland, Pennsylvania, using the provided parcel post and freight shipping addresses. Transportation instructions are governed by DLAD Proc Note C19 for general shipping and C20 for first destination transport. All requirements under Solicitation SPE7M1-26-T-244C take precedence, and the contract was issued under a federal solicitation managed by the Department of Defense’s Maritime Supply Chain, with Michael Reese as the point of contact.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
PANEL, CONTROL, ELECT
Solicitation # SPE7L1-26-T-906D
The contract pertains to the procurement of a single unit of a control panel, electric, identified by NSN 2590-01-726-1416 and part number 1280E-10-00, supplied by ISOMETRICS INC. The item is classified as a critical application item and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements identified by R or I numbers. Delivery is required within ten days of contract award, with FOB origin terms, and inspection and acceptance both occur at the destination. Packaging must adhere strictly to MIL-STD-2073-1E with specified preservation methods including preservative treatment, drying, and packaging materials as defined, and marking must follow MIL-STD-129 with no special marking codes applied. Palletization follows DLA packaging requirements, and the item is to be shipped using the fastest traceable means, excluding parcel post, with the specified freight and mark-for address in San Antonio, Texas. The shipment must be coordinated under RDD 555 and linked to Project TP 2, with a required delivery date of July 28, 2026. The contract is governed under solicitation SPE7L1-26-T-906D, issued under NAICS code 333310 by the Department of Defense, Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
POTASSIUM HYDROXIDE SO
Solicitation # SPE2DS-26-T-297A
POTASSIUM HYDROXIDE SOLUTION, 10 PERCENT, IN DROPPER FORM FOR DIRECT SMEAR EXAMINATION FOR FUNGAL ELEMENTS, IS BEING PROCUREMENT UNDER NSN 6550-01-521-0124 WITH A QUANTITY OF TWO PACKAGES, EACH CONTAINING FIFTY UNITS. THE ITEM HAS A NON-EXTENDABLE SHELF LIFE OF 24 MONTHS FROM MANUFACTURE, AND NO MORE THAN THREE MONTHS MAY HAVE ELAPSED BETWEEN MANUFACTURE AND DELIVERY TO THE GOVERNMENT. IT CAN BE STORED AT ROOM TEMPERATURE. PACKAGING MUST COMPLY WITH COMMERCIAL STANDARDS, INCLUDING SEALED UNIT CONTAINERS TO PREVENT DAMAGE AND SUITABLE EXTERIOR SHIPPING CONTAINERS TO ENSURE SAFE AND COST-EFFECTIVE TRANSPORTATION. MARKING MUST FOLLOW MEDICAL MARKING STANDARD NO. 1, WHICH SUPERSEDES MIL-STD-129, AND COPIES OF THIS STANDARD ARE AVAILABLE THROUGH DLA TROOP SUPPORT. THE PROCUREMENT IS GOVERNED BY TECHNICAL AND QUALITY REQUIREMENTS FROM THE DLA MASTER LIST, AND PACKAGING MUST MEET DLA SPECIFICATIONS. AS A HAZARDOUS MATERIAL, THE ITEM REQUIRES FULL COMPLIANCE WITH 49 CFR AND ICAO REGULATIONS. A CURRENT MATERIAL SAFETY DATA SHEET (MSDS) MUST BE SUBMITTED TO DLA.MSDS@DLA.MIL WITH COVER SHEET P-75 AND A COPY OF THE MSDS MUST ACCOMPANY EACH SHIPMENT. THE BIDDER MUST SPECIFY THE PART NUMBER BEING SUPPLIED UNDER SOLICITATION SPE2DS-26-T-297A, WITH A RESPONSE DEADLINE OF AUGUST 10, 2026, AND DELIVERY DUE WITHIN 20 DAYS AFTER DEVICE OF AWARD.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 336413
New
DIBBS
CARTRIDGE, RESPIRATO
Solicitation # SPE8E6-26-T-3961
This contract specifies the procurement of respiratory cartridges, part number 7000051851 manufactured by 3M Company, with the NSN 4240-01-342-2857, under solicitation SPE8E6-26-T-3961. Each package contains 60 cartridges, and the item is classified as a Type I respirator cartridge with a non-extendable shelf life of 60 months, requiring compliance with NIOSH approval TC-23C-1062. The product must be free of intentionally added mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, and controlled instruments, with additional containment requirements for portable mercury-containing devices per NAVSEA 5100-003D. The contract enforces strict packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129P, with special labeling for shelf life and the prohibition of plastic wrap, cushioning, or dunnage materials whenever possible. Palletization must adhere to DLA Packaging Requirements, and hazardous material shipping protocols are applicable. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. Delivery is FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Five separate delivery lines specify quantities ranging from one to ten packages, with required delivery dates between March and August 2026, and destinations spanning multiple U.S. military installations including Oahu, Offutt AFB, Yokota AB, and Tampa, with explicit instructions against using parcel post in favor of traceable transportation methods. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 423690
New
DIBBS
WAVEGUIDE
Solicitation # SPE7M5-26-Q-0824
The Defense Logistics Agency under the Department of Defense has issued a solicitation for a single unit of a waveguide identified by NSN 5985-01-558-4115 under purchase request 7017225749. The solicitation, numbered SPE7M5-26-Q-0824, was posted on August 3, 2026, with a response deadline of August 6, 2026, at 5:00 PM. This federal procurement is classified as a solicitation without a specific set-aside designation or NAICS code, indicating it is open to general federal contractor participation. The place of performance and point of contact information are not provided, and the contract is administered through the DLA’s DIBBS platform, with all details accessible via the provided UI link.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 3 days
View Details
NAICS: 423510
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0342
The contract specifies the procurement of aluminum alloy 6061 bar stock with a flat cross section, 0.500 inches thick and 1.250 inches wide, available in whole-foot lengths of 10, 11, or 12 feet, with an approximate weight of 0.735 pounds per foot. The material must conform to SAE AMS4117M Revision M, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper designation of T6, and requires a Certificate of Quality Compliance (mill material certification) to be included with each shipment. All units must be permanently marked with minimum required data including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling; adhesive labels are required for bars under 0.250 inches nominal diameter. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation per ASTM B660 and marking as per MIL-STD-129R, including special code ZZ for preservation and packing. The item is subject to strict compliance with the Qualified Suppliers List for Distributors (QSLD) program; only distributors listed on the QSLD are eligible to supply this product, and any deviation or use of non-approved suppliers constitutes an unauthorized substitution that may result in criminal penalties. Government inspection and quality conformance requirements are waived for QSLD-compliant suppliers. The contract is firm fixed price with zero variance allowed in quantity, and delivery is required within 30 days after award. All shipments must be sent via traceable freight, not parcel post, to the designated DLA depot in Tobyhanna, Pennsylvania, with full compliance to all marking and documentation requirements.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1939
The contract specifies the procurement of one metal plate identified by NSN 9535-01-477-4004 and part number 230-10269, with a unit of issue as a single piece. Delivery is required within five days of award, with goods to be shipped FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, specifically using packaging method 10, drying method 1, and preservative material 00. Marking follows MIL-STD-129 with no special marking code, and palletization adheres to DLA packaging requirements. The shipment is to be delivered via traceable means excluding parcel post to a military address at Fort Bliss, Texas, with detailed routing instructions including RDD and TCN identifiers. The contract references technical and quality standards from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information. The solicitation number is SPE8E4-26-T-1939, issued by the Defense Logistics Agency under NAICS code 331491, with a response deadline of August 14, 2026, and an original required delivery date of July 31, 2026.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0343
The contract pertains to the procurement of four metal bars with part number 9530-01-691-9562 under solicitation SPE8E4-26-Q-0343 issued by the Defense Logistics Agency. Delivery is required within 30 days of award, and responses must be submitted by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval may access the controlled data. Additionally, the contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by an accredited third-party assessment organization. The point of contact is Leslie Morales-Zera, reachable via email or phone provided.

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339994
New
DIBBS
CLOTH, CLEANING
Solicitation # SPE8E5-26-T-3752
The contract pertains to the procurement of cleaning cloths designated by part number 599306 and NSN 7920-01-614-3522, with a unit of issue of one box containing 100 items. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and acceptance occurs at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for Type II shelf-life items, and palletization must adhere to DLA packaging requirements. The item has a 12-month extendable shelf life per RS001, and all packaging and shipping must meet hazardous materials protocols. The delivery destination is AECOM HMMC Okinawa at Camp Kinser, FPO AP 96375, with parallel freight shipping instructions to the same location under JP address details. The contract is governed by DLA technical and quality specifications referenced in the DLA Master List, and the solicitation number SPE8E5-26-T-3752 is valid with a response deadline of August 14, 2026, and an original required delivery date of August 4, 2026. The procurement is under the NAICS code 339994 and managed by the Defense Logistics Agency.
Broom, Brush, and Mop Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-4547
This contract is for the procurement of six battery storage units identified by NSN 6140-01-701-5915 and part number A66-11336-002, supplied by Daimler Truck North America LLC under solicitation SPE7L7-26-T-4547. The items are classified as a Type I (Code H) critical application item with a non-extendable shelf life of 12 months, requiring strict adherence to packaging, marking, and shipping standards specified in MIL-STD-2073-1E and MIL-STD-129, including special labeling for shelf life code 32. All packaging must comply with DLA’s procurement requirements and hazardous materials handling protocols, and the units must be shipped via traceable freight methods—not parcel post—to the designated delivery point at USCG AIRSTA Barber’s Point in Kapolei, Hawaii, with delivery due within 20 days of contract award. The units must not contain intentionally added mercury except where functionally necessary in batteries or approved instruments, and any mercury-containing components must be shockproof with secondary containment per NAVSEA 5100-003D. Sampling and quality verification must follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The contract includes provisions for hazardous communication, removal of government identification from non-accepted supplies, and covers defense information under RD003, with full technical and quality requirements referenced from the DLA Master List. The unit of issue is each, priced at $6.00 per unit for a total of $36.00, with no quantity variance allowed, inspection and acceptance occurring at destination, and the original required delivery date is July 24, 2026.
Battery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E8-26-T-4941
The contract pertains to the procurement of one compressor unit, reference model, with NSN 4130-01-490-3757, under solicitation SPE8E8-26-T-4941 issued by the Defense Logistics Agency. Delivery is required within five days of award, FOB destination, with no variance permitted in quantity, and inspection and acceptance are to occur at the delivery point. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, container types, and marking in accordance with MIL-STD-129, with no special markings required. The unit must not contain mercury or mercury-containing compounds unless explicitly exempted for functional uses in batteries, lighting, sensors, weapon systems, or authorized chemical reagents, and any portable mercury-containing devices must be shockproof with secondary containment per NAVSEA 5100-003D. Transportation must follow DLAD Proc Note C19 and C20, using traceable methods only—parcel post is prohibited—and shipments are to be directed to USS ASHLAND LSD-48 at FPO AP 96660 under RDD 777, with VSM used by DLA vendors. The item falls under NAICS code 333415, with a required delivery date of July 31, 2026, and the solicitation response deadline is August 14, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, and source approval documentation must meet RC001 standards. All compliance and delivery instructions are binding and must be strictly adhered to by the vendor.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIR
Solicitation # SPE8E8-26-T-4940
The contract pertains to the procurement of one air filter element with NSN 4130016962270 and part number 8005-3401-2333, supplied by TECH-ETCH, INC. Delivery is required within five days of award, with FOB origin terms and no tolerance for quantity variance, meaning exactly one unit must be delivered. Inspection and acceptance both occur at the destination point, and the item must be packaged in compliance with ASTM D3951, subject to overriding DLA Master List of Technical and Quality Requirements, while also adhering to MIL-STD-129 for marking and labeling. Packaging and palletization must follow DLA’s RP001 requirements, with the unit of issue specified as EA and quantity per unit pack as 001. Shipments must use the fastest traceable means and explicitly prohibit parcel post; the freight delivery address is Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland. The required delivery date is July 31, 2026, with a contract solicitation number SPE8E8-26-T-4940 and a response deadline of August 14, 2026. All documentation, including source approval requests and removal of government identification from non-accepted supplies, must comply with referenced DLA directives, and the contracting office is under the Defense Logistics Agency with primary point of contact Alexis Selby.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339113
New
DIBBS
SEALING COMPOUND
Solicitation # SPE8ES-26-T-2486
The contract specifies the procurement of a black sealing compound, identified by NSN 8030-01-511-1245 and part number PR-2201 B1, with a unit of issue of 2.5 fl oz per kit and a total quantity of one kit. Delivery is required within ten days to Fort Rucker, Alabama, FOB destination, with no variance allowed in quantity. The item is classified as a Type 2 shelf life item with an initial shelf life of six months, extendable under specified conditions, and must be stored below 80 degrees Fahrenheit. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for Type II shelf life, and palletization must adhere to DLA packaging requirements. Hazardous material handling is governed by OSHA’s revised Hazard Communication Standard, requiring submission of approved Safety Data Sheets and compliant labels prior to award, along with employee training on the new classification and labeling system. The sealing compound must be shipped using the fastest traceable means, excluding parcel post, and is subject to inspection and acceptance at the delivery point. The solicitation is issued by the Defense Logistics Agency under contract number SPE8ES-26-T-2486, with a response deadline of August 10, 2026, and a required delivery date of August 4, 2026. The technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, applicable under the revision in effect on the solicitation issue date or award date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0344
The contract pertains to the procurement of four metal bars, identified by part number 7053887-1 and NSN 9530-01-691-7713, under solicitation SPE8E4-26-Q-0344 issued by the Defense Logistics Agency. Delivery is required within 30 days of award, with responses due by August 17, 2026, and the solicitation posted on August 3, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons, whether inside or outside the U.S., and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program certification, completion of mandatory DOD export control training, and prior authorization from DLA. Additionally, the contractor must hold CMMC Level 2 certification through a certified third-party assessment organization and adhere to DLA packaging standards and procedures for removing government identification from non-accepted supplies. The primary point of contact is Leslie Morales-Zera, reachable via phone and email provided.

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E7-26-T-3452
The contract is for the procurement of two tubeaxial fans identified by NSN 4140-01-685-6531 and part number 44-12-DD3 from HARTZELL FAN, INC. The item must be delivered within five days of award, with delivery terms set at FOB origin and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements. The goods must be shipped by the fastest traceable method, excluding parcel post, to the designated delivery point at Fort Eustis, Virginia. The contracted quantity is two units at a total price of $2.00 per unit. The contract number is SPE8E7-26-T-3452, with a required delivery date of August 8, 2025, and all provisions are governed by the DLA’s current master list of technical and quality standards in effect on the solicitation issue date. Marking and documentation must include the government-provided mailing and shipping identifiers, and government-use-only codes are embedded for internal tracking.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details