Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FILTER ELEMENT, FLUI

Active
SPE7M0-26-T-014YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for one FILTER ELEMENT, FLUID with NSN 4330014337132 and part number 6001804 supplied by SPX Corporation Dehydration Division, under solicitation SPE7M0-26-T-014Y. Delivery is required within five days of contract award, FOB origin, and must be shipped by the fastest traceable means—parcel post is prohibited. The item is classified as a critical application item and must comply strictly with DLA packaging requirements per MIL-STD-2073-1E, including specific packaging methods, materials, and marking per MIL-STD-129 with no special markings required. The item must not contain or come in direct contact with mercury or mercury compounds except under narrowly defined exceptions for specified functional uses like batteries or instruments, and portable devices containing mercury must have shockproof construction and a secondary containment. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The delivery address is Norfolk Naval Shipyard in Portsmouth, VA, with special handling instructions requiring palletization per RP001 and government-specific coding for tracking and logistics. The required delivery date is July 22, 2026, with no tolerance for quantity variance, and acceptance occurs at the destination upon inspection.

General Info

One fluid filter element delivered FOB origin by July 22, 2026, per strict DLA packaging and mercury restrictions.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

BUILDING 276, PORTSMOUTH, VA, 23709-1001, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Abaigael Masterson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILTER ELEMENT,FLUI
FILTER ELEMENT, FLUID.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
SPX CORPORATION DEHYDRATION DIV 00819 P/N 6001804
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017559695 0001 EA 1.000
NSN/MATERIAL:4330014337132
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
SPE7M0-26-T-014Y
SECTION B
PR: 7017559695 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D4 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N42158
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD
BUILDING 276
PORTSMOUTH VA 23709-1001
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N42158
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD
BUILDING 276
PORTSMOUTH VA 23709-1001
US
M/F: (TCN) N4215861976014
RDD: 205
PROJ: 606 TP 1
SUPP ADD: Y 297 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: 2L FC: QR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE7M0-26-T-014Y NSN/Part Number: 4330-01-433-7132 Quantity: 1 EA Purchase Request: 7017559695QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE EXTThe contract specifies the procurement of tube assemblies for a fire extinguishing system, with two approved part numbers from KIDDE TECHNOLOGIES INC: P/N 423117 and P/N 432117, classified as critical application items. The item is identified by NSN 4210-01-643-8401, with a quantity of six units, each to be delivered as a single unit of issue. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RC001 for source approval documentation, RP001 for packaging standards, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs per critical, major, or minor classifications. Packaging must meet MIL-STD-2073-1E with specific preservation methods, and marking must comply with MIL-STD-129 without special codes. Palletization follows DLA packaging requirements. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The required delivery date is January 17, 2028, with a lead time of 171 days, and shipment must be sent to the DLA Distribution Albany facility in Albany, Georgia. The contract was solicited under SPE4A6-26-T-08EA with a response deadline of July 29, 2026, and the purchasing agency is the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
THREAD, PIECEThe item specified is a THREAD, PIECE with NSN 1720-00-602-0997, quantity of 25 units, under Purchase Request 7017528515, with a delivery deadline of 162 days ADO. This procurement is governed by strict DLA packaging requirements and requires the contractor to be certified by a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any transfer or disclosure to foreign persons regardless of location, including foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required DOD export control training and the DLA questionnaire, are authorized to access the controlled data. The solicitation number is SPE7M2-26-T-5700, posted on July 21, 2026, with responses due by August 3, 2026. The contracting organization is the Department of Defense’s Nuclear Reactor Program, with performance to be delivered to New Cumberland, PA, 17070-5002. Alisha Blanton is the primary point of contact for inquiries.
NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUIThe contract pertains to the procurement of a filter element for fluid pressure, identified by NSN 4330-01-131-3049 and part number 410162, with a quantity of two units required. Delivery is due within twenty days of award and must be shipped FOB origin to the Naval Undersea Warfare Center Division Keyport in Washington, with strict adherence to packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129. No special marking is required, and palletization must comply with DLA packaging directives. The item must be shipped via traceable freight methods only, explicitly prohibiting parcel post. Mercury and mercury-containing compounds are strictly prohibited from contact with the product unless part of exempted components such as specific instruments, sensors, or controls as outlined by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment. The solicitation number is SPE7M1-26-T-220Q, with a response deadline of August 3, 2026, and an original required delivery date of July 16, 2026. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The unit of issue is each, with a fixed unit price and zero tolerance for quantity variance. Inspection and acceptance occur at the destination. The point of contact for the contract is Michael Reese of the Defense Logistics Agency, and the item falls under NAICS code 333998. Government-use codes and shipping identifiers are provided for internal logistics tracking, and the contract is issued under the Department of Defense by the Maritime Supply Chain organization.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TEST PAPER AND COLOR CThe contract specifies the procurement of test paper and color chart for pH, provided in six packs of 100 strips per package, with the unit of issue being a package containing six entities. The product is identified by NSN 6640-01-345-0909, with a quantity of one package required under purchase request 7017560997. Delivery must be completed within 20 days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and non-accepted supplies must have government identification removed. The solicitation number is SPE2DH-26-T-5361, issued on July 21, 2026, with responses due by July 28, 2026. The acquiring agency is the Department of Defense, specifically the Medical Supply Chain FSH, with performance taking place at FPO, ZIP 96667. Primary point of contact is Tina Vu, reachable via email and phone provided. The NAICS code 333998 identifies the category of manufacturing involved.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUIDThe contract pertains to a fluid pressure filter element with a tinned copper core, identified by NSN 4330-00-798-4150, with a quantity of one unit required under purchase request 7017559825. Delivery is mandated within 20 days after order, and the procurement is governed by the solicitation number SPE7M1-26-T-220P, issued on July 21, 2026, with responses due by August 3, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and unauthorized removal of government identification from rejected items is prohibited. The place of performance is Redstone Arsenal, Alabama, with Michael Reese of the Department of Defense’s Maritime Supply Chain acting as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
FILTER UNIT, FLUID, PThe contract specifies the procurement of one unit of a Fluid Pressure Filter Unit with NSN 4330-01-328-5710 and part number 514-1633-1 under solicitation SPE7M1-26-T-220R. Delivery is required within 20 days of award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination. Packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence over ASTM standards. Palletization must adhere to DLA Packaging Requirements for Procurement, and the unit of issue is one each. The shipment must be sent via the fastest traceable means, excluding parcel post, and is directed to Fort Campbell, Kentucky. The delivery address is W34GM2, Building 5339, Wickham Avenue, Fort Campbell, KY 42223-0000, with a mark-for address matching the same location. The required delivery date is July 16, 2026, and the contract references the DLA Master List incorporated by reference, with revisions controlled by the solicitation issue date. The point of contact is Michael Reese, and the solicitation was posted July 21, 2026, with responses due August 3, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
SEWING MACHINE, INDUSTRThe contract specifies the procurement of industrial sewing machines under NSN 3530011809072, with detailed technical requirements including an arm length of 10.500 inches nominal, stitch type 301 style H with compound alternating presses, and compliance with OO-S-256/1B Class 4. The machines are identified as commercial items and must conform to MIL-STD-130N for government identification marking. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951 for packaging, while requiring adherence to MIL-STD-129 for labeling and RP001 for DLA packaging and palletization. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are subject to stringent verification levels. The machines are manufactured by Consolidated Sewing Machine Corp and Pennsylvania Sewing Machine Company under specified part numbers. The contract includes two line items totaling 19 units, with delivery scheduled in 85 days FOB origin and inspection and acceptance occurring at the destination. Units are to be shipped to two DLA distribution centers in Jacksonville, Florida and Cherry Point, North Carolina, with exact packaging, unit of issue, and quantity per unit pack defined per the contract. The need ship date is July 8, 2026, with an original delivery deadline of January 17, 2027. All requirements are governed by the solicitation SPE8ED-26-T-1156, which includes federal contracting clauses, restrictions on government identification removal, and documentation protocols for source approval. The contract is issued under a DoD-authorized unit of issue with pricing provided per unit, and all transportation logistics follow DLAD procedural notes C19 and C20.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
FILTER, FLUIDThe contract specifies the procurement of a two-stage fluid pressure filter for air lines, designed to remove condensates and impurities with a 40-micron rating, operating at 200 psi and 100 CFM. The approved suppliers are Parker-Hannifin Corporation with part number 06F24A and W.W. Grainger, Inc. with part number 4ZL47. The item is identified by NSN 4330-01-056-3122, and two units are required at a total price of $2.000 per unit. Delivery is required within five days FOB origin with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering to the stricter requirements of the DLA Master List of Technical and Quality Requirements, including labeling per MIL-STD-129 and palletization per RP001. The filter must be shipped by the fastest traceable means, explicitly excluding parcel post, to the specified freight address in Milwaukee, Wisconsin. The required delivery date is July 21, 2026, with no need for a ship date input, and the contract is issued under solicitation SPE7M0-26-T-014N with oversight from the Department of Defense’s Maritime Supply Chain ESOc Buys office. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and government contact information and identifiers are provided for administrative and tracking purposes.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
PAPER, FILTERThe contract is for the procurement of disposable paper filters designed for use with rigid sterilization container systems, with a unit of issue of 1,000 units per package. The item is identified by NSN 6640-01-378-5773, and the requested quantity is one package totaling 1,000 units. The procurement is governed by DLA packaging requirements and mandates the removal of government identification from non-accepted supplies. Defense information potentially applies, indicating sensitivity or controlled handling procedures. The solicitation number is SPE2DH-26-T-5353, posted on July 21, 2026, with responses due by July 28, 2026. The contracting agency is the Department of Defense, specifically the Medical Supply Chain FSH, with performance required at JBER, Alaska, 99506-4400. Delivery is expected within five days of award. The primary point of contact is Tina Vu, reachable via email and phone, and the solicitation is accessible through the DIBBS platform.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
STRAINER ELEMENT, SEThe contract is for one Strainer Element, Sediment, identified by NSN 4730-01-596-3898 and part number THH0065, issued under solicitation SPE7M3-26-T-7572 by the Department of Defense’s Fluid Handling Division. The item must be delivered within 20 days to the address in Port Hueneme, California, with delivery terms set at FOB Origin and inspection and acceptance occurring at the destination. No quantity variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and marking adhering to DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standard. Palletization must follow RP001, and the item must not be shipped via parcel post; instead, it must be sent by the fastest traceable means. The required delivery date is July 16, 2026, and the contract specifies a single unit of issue at a total price of one dollar. Technical and quality compliance is governed by referenced R and I numbers from the DLA Master List, accessible online, with revisions controlled based on acquisition type and amendment dates. Government use codes and shipment identifiers are included for internal tracking, and the primary point of contact is William Cain, with details provided for inquiries and documentation.
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
CYLINDER, GRADUATED,The contract specifies the procurement of two graduated laboratory cylinders, each with a capacity of 1000 milliliters, made of polymethylpentene PMP, clear, featuring gradation intervals of 10.0 milliliters, a diameter of two and five-eighths inches, and a height of seventeen and one-quarter inches. The unit of issue is each, and bidders must provide the source and part number being supplied. Packaging must comply with DLA Packaging Requirements for Procurement, requiring each unit to be sealed in a suitable container to prevent damage or breakage, and shipped in commercial exterior containers that ensure safe delivery at the lowest rate to the specified delivery point at Camp Pendleton, California. All items must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. Government identification must be removed from non-accepted supplies. The solicitation number is SPE2DH-26-T-5349, with a response deadline of July 28, 2026, and delivery required within 20 days after award. Point of contact is Tina Vu at DLA Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
Federal
CABLE ASSEMBLY
Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

in 30 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 333914
New
DIBBS
SLEEVE, SHAFT, PUMPThe contract pertains to the procurement of one sleeve assembly for a pump shaft, specifically designated for use with the Worthington 2CNE72 centrifugal pump and identified by the part number 023054-30 under the NSN 4320002941591. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within five days from the origin point under FOB origin terms, with no tolerance for quantity variance. The product must be prepared for shipment in accordance with MIL-STD-2073-1E packaging standards, marked per MIL-STD-129, and packed at level B using code Q with no special marking. Inspection and acceptance occur at the origin, and the item must be palletized following DLA packaging requirements. The delivery destination is King Abdulaziz Naval Base in Jubail, Saudi Arabia, with freight handled by New York Forwarding Services Inc. The solicitation number is SPE7M0-26-T-014A, with a required delivery date of July 23, 2026, and the contract is managed under the Department of Defense’s Maritime Supply Chain ESOc Buys unit, with Grace Beck listed as the primary point of contact.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, ROTARYThe contract is for a single rotary switch with NSN 5930-01-619-0800, under purchase request 7017559756, requiring delivery within five days after award. The solicitation number is SPE7M0-26-T-015K, issued on July 21, 2026, with responses due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The item is to be delivered to FPO, ZIP 34094, and the contracting office is the Maritime Supply Chain ESOC Buys under the Department of Defense. Primary point of contact is Laurie Wassmuth, reachable via email or phone. The NAICS code is 335313, and the solicitation is classified as federal with no set-aside designation.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLICThe contract specifies the procurement of one nonmetallic hose with NSN 4720-01-471-4870 and part number 5E-9746, supplied by CATERPILLAR INC, under solicitation SPE7M0-26-T-015B. The item must be delivered within five days to Fort Leonard Wood, Missouri, under FOB origin terms, with no tolerance for quantity variance. All packaging must comply with ASTM D3951 and MIL-STD-129 for labeling and marking, with DLA Master List of Technical and Quality Requirements taking precedence over any other standard. The hose must be palletized according to DLA packaging requirements and shipped via traceable freight methods, excluding parcel post. The shipment is designated as RDD3 with no NMCS requirement, and the delivery address is the US Army Engineer School. The required delivery date is July 22, 2026, and the contract includes strict government-specific identifiers and logistics codes for tracking and accountability. The point of contact for inquiries is Abaigael Masterson, and the procurement is managed by the Department of Defense’s Maritime Supply Chain ESOc Buys.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335929
New
DIBBS
SIDE LEFT ELECThe contract pertains to the procurement of five units of SIDE LEFT ELEC with NSN 6145-01-556-7082, under solicitation number SPE7M0-26-T-016N, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, and the place of performance is designated as Texarkana, Texas, with a ZIP code of 75507-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment supersedes it. The offeror must provide a complete data package covering both the approved and alternate parts, as no specific data is currently available. The solicitation was posted on July 21, 2026, with bids due by August 3, 2026, and is categorized under NAICS code 335929. Primary point of contact is Abaigael Masterson, reachable via email and phone listed in the contract data.
Other Communication and Energy Wire Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
WAVEGUIDE ASSEMBLYThe contract is for the procurement of a single Waveguide Assembly with part number R17-3329 and NSN 5985-01-651-9165, manufactured by Microwave Engineering Corporation, under solicitation SPE7M0-26-T-015P. This is a critical application item requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific compliance to revision E of reference drawing NR 1L4J7 684-8270004 dated 01/10/2018. The item must be produced using limited rights data accessible only to qualified vendors, and a classified drawing will be provided upon award following submission of a completed DD Form 254. The vendor must also achieve CMMC Level 2 self-assessment certification and comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special markings required. The unit of issue is EA, with a fixed quantity of one, and delivery must occur within five days at FOB origin, with inspection and acceptance also occurring at origin. Packaging and shipping must follow hazardous materials guidelines and use traceable freight methods—parcel post is prohibited. The delivery address is Tobyhanna Army Depot, with a required delivery date of July 21, 2026. The item is identified as a government-furnished property with specific tracking identifiers and is subject to cybersecurity and data protection mandates under covered defense information rules.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETALThis contract specifies the procurement of a single nonmetallic hose assembly with part number 4720-01-084-0119, measuring 3/8 inch inner diameter and 28 inches in length, supplied under firm fixed price terms with zero variance allowed in quantity. The item must be delivered within five days after award of order and is subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, with mandatory labeling per MIL-STD-129 and palletization in accordance with RP001 DLA Packaging Requirements. The unit of issue is one each and the item is to be shipped by the fastest traceable means, explicitly excluding parcel post. The delivery address is Logistics Lane, Barksdale Air Force Base, Louisiana, with specific shipping identifiers including RDD 777, PROJ TP 1, and supplier code YAG328. The contract references approved suppliers and part numbers including Danfoss Power Solutions II, LLC and Atkinson Co., Inc., and the government reserves the right to remove identification from non-accepted supplies. All technical and quality specifications cited in the DLA Master List control over conflicting standards. The solicitation number is SPE7M0-26-Q-1084, with a response deadline of July 28, 2026, and a required delivery date of July 20, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335312
New
DIBBS
LINE REACTORSThis contract pertains to the procurement of one line reactor identified by NSN 6110-01-541-7029, with a requirement for delivery within five days of award. The solicitation number is SPE7M0-26-T-015J, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys organization, with performance required in Bremerton, Washington, 98314-5001. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which incorporates specific technical and quality controls identified by R or I numbers, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specified exemptions such as functional mercury in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must provide a complete data package covering both the approved part and any alternate part, as no data is currently available for this item. The response deadline is August 3, 2026, and primary point of contact is Rocio Mino at DLA.
Motor and Generator Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
VACUUM PUMP UNIT, ROThe contract is for one vacuum pump unit, part number 93613 and NSN 4310016416459, to be delivered within five days of award under solicitation SPE7M0-26-T-015U. The unit must comply with all DLA packaging requirements outlined in RP001 and be packaged in accordance with MIL-STD-2073-1E using method 31 for preservation, with no cushioning material and a packaging code of U. Marking must follow MIL-STD-129 with no special marking required. The delivery is FOB origin, inspection and acceptance occur at the destination, and no quantity variance is permitted. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials must be approved unless explicitly permitted by specification. The delivery destination is the Carrier Outfitting Material Support Center in Suffolk, VA, and shipment must be sent by the fastest traceable method—parcel post is prohibited. The contract prohibits removal of government identification from non-accepted supplies and is governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The required delivery date is July 20, 2026, and the point of contact is Grace Beck of the Department of Defense.
Air and Gas Compressor Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
TEST SET SUBASSEMBLThis contract pertains to the procurement of two units of a test set subassembly identified by NSN 4921-01-029-3054 and part number CA70251, under solicitation SPE7M0-26-T-014D. The delivery must occur within five days of order placement, with FOB origin terms and no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 specifications, utilizing approved methods and materials while avoiding plastics where possible, as required by DLA packaging standards. The item is to be delivered to a military facility in Derince, İzmit, Turkey, with freight handled by PTK00A at NUWC Newport, and must be palletized and marked in accordance with all referenced defense standards. The contract prohibits the use of Class I ozone-depleting chemicals and mandates adherence to all technical and quality requirements listed in the DLA Master List, which controls based on the solicitation issue date. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the supplier must ensure compliance with the DLA procurement framework including oversight of government identification removal on non-accepted supplies. The solicitation is issued by the Department of Defense through the Maritime Supply Chain ESOc Buys office, with a response deadline of August 3, 2026, and an original required delivery date of July 23, 2026. The item is classified under NAICS code 333310 and is subject to federal procurement rules. Special marking is not required, and the unit of issue is each. The point of contact is Audrey Acuna, and the full technical and quality specifications are incorporated by reference through DLA’s official master list. All deliveries are to be coordinated to the specified Turkish military address and governed by the DoD’s authorized unit of issue guidelines. The contract does not permit substitutions without prior approval, particularly for chemicals or packaging materials, and remains binding under all applicable defense acquisition regulations.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, TRIGGERThe contract pertains to the procurement of one SWITCH, TRIGGER with NSN 5930-01-177-5707 under solicitation SPE7M0-26-T-014P, with a required delivery within five days of award. The procurement is governed by DLA packaging requirements and includes the application of Covered Defense Information under RD002, alongside mandatory compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 through a self-assessment. All technical and quality requirements referenced in this solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The government mandates the removal of any government identification from non-accepted supplies. The solicitation was posted on July 21, 2026, with responses due by August 3, 2026, and is classified under NAICS code 335313 for electrical equipment manufacturing. The contracting activity is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense, with performance required in Lexington, Kentucky, 40516-9723. Primary point of contact is Laurie Wassmuth, reachable via email and phone provided.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
CABLE, POWER, ELECTRICALThe contract specifies the procurement of 800-foot reels of electrical power cable under NSN 6145012020676, with a total quantity of 360 feet divided across three line items, each priced at $120 per foot. The cable must comply with Military Specification MIL-DTL-24643/16G and MIL-DTL-24643D, and is designated as a critical application item requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The product must be supplied in continuous length, as dictated by Advice Code 2N, and multiple unit packs are not acceptable. Mercury or mercury-containing compounds are strictly prohibited in or in direct contact with the cable except for specific functional exceptions like batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. Packaging and preservation must follow MIL-STD-2073-1E and MIL-DTL-12000, with marking conforming to MIL-STD-129, and the items must be delivered FOB origin within five days of order. The delivery destination is the U.S. Naval Base in Sasebo, Japan, with inspection and acceptance occurring at the point of delivery. The contract is subject to a 10% positive quantity variance with zero tolerance for under-delivery and falls under a Total Small Business Set-Aside classification. All supplies must be sourced from qualified manufacturers listed on the Qualified Products List or Qualified Manufacturers List, and deviation requests must be formally submitted. The required delivery date is July 17, 2026.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
DIBBS
SERVICE KITThis contract pertains to the procurement of a Service Kit under solicitation SPE7M0-26-T-015Y, with a single unit of item NSN 4940-01-687-7467, quantity one, to be delivered within five days from the required delivery date of July 20, 2026. Delivery is FOB origin, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special markings required. Palletization follows DLA’s packaging requirements, and all items must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The shipping and delivery address is the Carrier Outfitting Material Support Center in Suffolk, Virginia. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must receive prior approval unless explicitly permitted by specification. The contract incorporates all technical and quality requirements listed under R or I numbers from the DLA Master List, with the applicable revision determined by the solicitation issuance or award date. The unit of issue is EA, and the total price is based on a unit price of $1.00. Government-specific identifiers are included for tracking and logistics including RDD 777, project ZQ0 TP 1, and procurement request 7017552578. The primary point of contact is Audrey Acuna, with the contract issued under NAICS code 334220 by the Department of Defense.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details