Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FILTER GAS ANALYSER

Active
SPE2DH-26-T-5284Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation is for a Filter Gas Analyser active charcoal mat designed for use with the Detector IPDS LR, with a unit of issue of each and a total quantity of 144 units. The National Stock Number is 6630-12-389-2674, and the purchase request number is 7017536497. The delivery timeline requires fulfillment within 353 days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA procurement standards, and all non-accepted supplies must have government identification removed in accordance with specified procedures. The solicitation is a Total Small Business Set-Aside under NAICS code 334515, administered by the Department of Defense’s Medical Supply Chain FSH, with performance centered in New Cumberland, Pennsylvania. Bids must be submitted by July 27, 2026, and the solicitation was posted on July 19, 2026, with primary point of contact Tina Vu reachable via email and phone provided.

General Info

144 active charcoal filter gas analyzers for Detector IPDS LR, due in 353 days, small business set-aside, bid due July 27, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical SignalsView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE2DH-26-T-5284 Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILTER GAS ANALYSER
FILTER GAS ANALYSER ACTIVE CHARCOAL MAT FOR DETECTOR IPDS LR. UNIT OF
ISSUE EACH (A).
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6630-12-389-2674 Quantity: 144 EA Purchase Request: 7017536497QTY: 144 Delivery: 353 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334515
New
DIBBS
Supply of Special Scale Meter (NSN: 6625-01-337-7421)The contract requires the procurement and delivery of one commercial off-the-shelf special scale meter identified by NSN 6625-01-337-7421, which must meet all applicable federal and military standards for labeling, packaging, and hazardous materials handling. The item is intended for use under the Department of Defense’s Maritime Supply Chain and must be delivered to the specified place of performance in San Diego, California, with the zip code 92106-5000. The solicitation is structured as a subcontract and falls under NAICS code 334515, indicating it relates to industrial instrumentation manufacturing. All deliverables must comply fully with technical and regulatory requirements to ensure operational readiness and safety in military environments. The opportunity was posted on July 19, 2026, with a response deadline of July 30, 2026, providing a limited window for interested parties to submit proposals. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors regardless of business size or classification. The lead agency is the Department of Defense through its Maritime Supply Chain office, and the contract details can be accessed via the DIBBS platform using the provided link. Although no point of contact information is listed, full compliance with packaging, labeling, and hazardous materials protocols is mandatory for contract award and subsequent acceptance.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
DIBBS
Precision Test & Measurement Equipment SupplyThe contract calls for the supply of a single calibrated ammeter identified by NSN 6625-01-328-9091 and part number 00-844206, with all items required to fully comply with the technical and quality standards outlined in the DLA Master List. The ammeter must be factory calibrated, thoroughly tested, and accompanied by official certification to verify accuracy and adherence to specifications. The procurement is classified as a subcontract under NAICS code 334515, targeting precision test and measurement equipment, and is being managed by the Department of Defense through the Maritime Supply Chain ESOC Buys division. Performance is designated to occur in New Orleans, Louisiana, with a zip code of 70143-5000. The solicitation was posted on July 19, 2026, and responses are due no later than July 30, 2026, with all submissions required to meet the outlined technical and compliance criteria without deviation.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
DIBBS
AMMETERThe contract pertains to the procurement of one ammeter with NSN 6625-01-328-9091 and part number 00-844206, sourced from Crompton Modutec Inc DBA 32171 or Custom Metering Company Inc 28304. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any commercial standards such as ASTM D3951. The item may contain batteries and must comply with applicable hazardous material packaging requirements under FED-STD-313 and TQ requirement IP025 if deemed hazardous; otherwise, it must be commercially packaged in compliance with ASTM D3951. All packaging and labeling must adhere to MIL-STD-129, and palletization must conform to RP001: DLA Packaging Requirements for Procurement. The unit of issue is each (EA), with no quantity variance allowed, and delivery is due within five days from the award date, FOB origin. Inspection and acceptance occur at the destination. The shipment must be sent via the fastest traceable means—parcel post is prohibited—and delivered to the specified government facility in New Orleans, Louisiana. The required delivery date is April 22, 2026, and the contract reference is SPE7M0-26-T-012U, with a response deadline of July 30, 2026. The purchase request number is 7016421758, and the point of contact is Rocio Mino at the Department of Defense. Government-use-only codes and tracking identifiers are embedded for logistics and accountability purposes.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
DIBBS
METER, SPECIAL SCALEThe contract is for a commercial off-the-shelf meter with a special scale, identified by NSN 6625-01-337-7421, with a quantity of one unit required under purchase request 7017523028. Delivery must be completed within 20 days after order award. The solicitation number is SPE7M1-26-T-217X, issued on July 19, 2026, with responses due by July 30, 2026. The item falls under NAICS code 334515 and is procured by the Department of Defense through the Maritime Supply Chain office. Performance is designated for San Diego, California, with a zip code of 92106-5000. The contract incorporates all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and amendment dates. Government identification must be removed from any non-accepted supplies, and the alternate offeror is required to submit a complete data package covering both the primary and alternate parts. Primary point of contact is Michael Reese, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
Federal
66--FILTER GAS ANALYSERThe U.S. Department of Defense, through DLA Troop Support, is seeking quotes for 144 units of NSN 6630123892674, a FILTER GAS ANALYSER, under solicitation SPE2DH26T5284, which is a Total Small Business Set-Aside. The requirement is for delivery to DLA Distribution at W1A8, with a scheduled delivery deadline 353 days after award. Only approved sources identified by the codes 03JW7 8249700, C5048 249700, and C5048 RS 0100 G 510 are eligible to respond. The solicitation is issued electronically via SAM.gov and no hard copies are available; all submissions must be made online. Technical specifications, plans, or drawings are not provided, and responsible small business concerns are encouraged to submit quotes by the deadline of July 27, 2026. The NAICS code is 334515, and all inquiries must be directed via email to the designated point of contact, as detailed in the solicitation document accessible through the provided web link.
DLA Troop Support

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334515
New
DIBBS
Power Factor Meter Manufacturing and SupplyThe contract requires the manufacture, quality assurance, packaging, and delivery of four Power Factor Meters with part number 1940-R and national stock number 6625-01-646-3053, fully compliant with Department of Defense standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The work must adhere to the specifications and quality controls mandated by the Defense Logistics Agency and is intended for delivery to Camp Pendleton, California, with the ZIP code 92055 identified as the place of performance. The NAICS code 334515 categorizes this as an electronics manufacturing subcontract, emphasizing precision instrumentation production under rigorous military specifications. The solicitation is open for responses until August 1, 2026, with the posting date listed as July 17, 2026. This is classified as a subcontract under the Maritime Supply Chain, which operates under the Department of Defense, and the contract details are accessible through the DIBBS portal. Although no specific set-aside status or point of contact is provided, all deliverables must meet the full scope of technical, packaging, and marking requirements outlined in the referenced military standards to ensure acceptance and utilization by DoD entities.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 334515
New
DIBBS
AMMETERThis contract specifies the procurement of three ammeters, identified by NSN 6625-00-926-7659, under solicitation SPE7M1-26-Q-1276, with a firm fixed price and zero tolerance for quantity variance. The item is classified as a restricted source requiring engineering source approval by the Government Design Control Activity, and technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Delivery is scheduled 193 days after award, with both inspection and acceptance occurring at origin, and the product must be packaged and marked in strict compliance with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, including specific methods for preservation, wrapping, and unit containerization with no special marking codes applied. The item is to be shipped via freight forwarder New York Forwarding Services Inc to the Harpoon Program Supply Officer at RSNF Headquarters in Riyadh, Saudi Arabia, with all packaging and shipping of hazardous materials adhering to IP025 standards. The contract identifies the purchase request as 7015524734 and assigns a ship date of February 18, 2026, while also providing government-only codes for internal tracking, logistics distribution, and program alignment under Project TP 2.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 334515
New
DIBBS
METER, POWER FACTORThe contract pertains to the procurement of four units of a Power Factor Meter with NSN 6625-01-646-3053 under solicitation SPE7M1-26-Q-1277, issued by the Department of Defense through the Maritime Supply Chain. The requirement is for a firm fixed price with no variance in quantity, meaning exactly four units must be delivered with no tolerance for over or under shipment. Delivery is due 143 days after award, and both inspection and acceptance occur at the destination. The item may contain batteries and must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging must be palletized per DLA requirements and shipped using traceable freight methods—parcel post is prohibited. The delivery address is Camp Pendleton, California, with specific contacts and shipping instructions provided for both freight and governmental use. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements accessible via the official DLA website. The item is designated for government use only, with a material need date of March 25, 2026, and is categorized under a federal acquisition process subject to DLA’s procurement rules and unit of issue standards.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 334515
New
Federal
Hydrogen Maser Repair/RefurbishedThe National Institute of Standards and Technology (NIST) is seeking market input to determine viable sources for the refurbishment and upgrade of aging hydrogen maser atomic clocks critical to maintaining UTC(NIST), its official time standard. Three units require comprehensive refurbishment, including inspection and potential replacement of the hydrogen bulb, RF alignment, thermal control boards, power modules, quartz oscillators, ion pumps, and physics packages. An additional three units are slated for upgrade to MHM-2020 specifications, involving replacement of key modules such as the cavity register control, front panel control, wiring harnesses, discharge source, and distribution amplifiers. NIST has not committed to a sole source procurement and explicitly states that identifying Microchip Technology Inc. in this notice is for informational purposes only and does not guarantee a sole source award. The agency is conducting open market research to assess competitive alternatives and is encouraging all capable vendors to respond. Responses must be submitted by August 3, 2026, and should include detailed company information, such as legal name, Unique Entity Identifier, SAM.gov registration status, and small business size status under NAICS 334515. Respondents are asked to provide specifications and origin details for any products or services that meet the technical requirements, clearly indicate whether those offerings qualify as commercial products, COTS items, or commercial services, and supply standard commercial pricing, terms, and warranty conditions. NIST also seeks feedback on how to improve the clarity and competitiveness of the requirements, particularly to encourage domestic manufacturing and compliance with “Made in America” principles. Companies are encouraged to disclose any existing GSA schedule contracts or other federal vehicles that could be used for procurement. NIST will use this information to inform its final acquisition strategy, which may lead to a formal solicitation, but no award or payment is guaranteed. Responses must not include proprietary, classified, or confidential data, and submissions after the deadline will not be considered.
Department Of Commerce Nist

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 334515
New
Federal
VIAVI T-BERD Analyzer Purchase The U.S. Army Corps of Engineers, Pittsburgh District, is preparing to issue a solicitation for the procurement of two T-BERD handheld test instruments from the TB5800-FAMILY3 series, along with the TB/MTS 5800 Family Configurator and dual-port 100G capabilities, to be delivered to authorized distributors. This procurement is identified under solicitation number W911WN26Q1BU2, with a posted date of July 17, 2026, and falls under NAICS code 334515 for other electronic component manufacturing. The contracting office is part of the Department of Defense, specifically under W072 Endist Pittsburgh, located at 15222-4198 in Pittsburgh, Pennsylvania. Interested vendors are directed to contact Contract Specialist Isaiah Johnson at isaiah.m.johnson@usace.army.mil to express interest and obtain further details. The place of performance and delivery specifics are not yet defined, and no set-aside type has been designated for this opportunity.
W072 Endist Pittsburgh

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 334515
New
Federal
SPECTRUM ANALYZERThe U.S. Navy’s Naval Surface Warfare Center Crane is seeking to procure a spectrum analyzer through a sole source acquisition under FAR Part 12, with Rohde & Schwarz USA, Inc. identified as the exclusive supplier. The solicitation, numbered N0016426Q0247, is open for quotations from July 17, 2026, to July 24, 2026, at 2:00 PM Eastern Time, with all responses required to be emailed to Danielle Richardson at the designated Navy address. While the procurement is structured as non-competitive, the government retains the discretion to reconsider competition based on any capability statements submitted by other firms, though no obligation to award to non-specified sources exists. The contract falls under NAICS code 334515 and carries no set-aside designation. Vendors must be currently registered in the System for Award Management to be eligible, and it is the offeror’s responsibility to monitor sam.gov for any amendments issued prior to the deadline. Changes after the closing date will only be shared with those who submitted offers. Performance will occur at the Crane, Indiana location, and all submissions must strictly adhere to the specified format and deadline.
Nswc Crane

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 334515
New
Federal
Sources Sought Shark 270 electric meterThe Naval Facilities Engineering Systems Command, Pacific is seeking information on alternative sources for an electric meter that matches the performance specifications of the Shark 270 model manufactured by Electro Industries/Gauge Tech, specifically for use in the Fiscal Year 2027 SIOP Project P-8026 at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam, Hawaii. The required replacement device must fully communicate with existing Shark 270 meters and be configurable using the manufacturer’s proprietary software, going beyond basic data exchange via the Modbus/TCP protocol, which does not support configuration or programming functions between different manufacturers’ equipment. This notice is a market survey under FAR 15.201(e) and is not a request for proposals or an invitation to bid; responses are for evaluation purposes only and do not constitute offers or create contractual obligations. Submitters must provide detailed technical documentation demonstrating full compatibility with the existing system, excluding generic company brochures. All submissions must be sent electronically to Annette Tijerina by 2:00 p.m. H.S.T. on July 30, 2026, and any information provided becomes the property of the U.S. Government, treated appropriately if proprietary or classified. Late or incomplete submissions will not be considered.
Navfacsyscom Pacific

POSTED

3 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171)The contract requires implementation and assessment of compliance with NIST SP 800-171 controls to safeguard covered defense information, particularly when the provided device contains firmware or software components. This subcontract is issued under the Department of Defense for the Medical Supply Chain FSH and is targeted at ensuring robust cybersecurity measures are in place to protect sensitive military data throughout the lifecycle of the delivered equipment. Compliance must be rigorously demonstrated, with emphasis on technical and procedural controls defined in the NIST framework to mitigate risks associated with unauthorized access, data exfiltration, or system compromise. The solicitation is open for responses until July 27, 2026, with a posting date of July 19, 2026, and the place of performance is designated as APO 96278-2069. The NAICS code 541512 indicates this effort falls within computer systems design and related services, suggesting the contractor will be expected to provide specialized cybersecurity implementation and evaluation services. There is no setaside designation specified, meaning eligibility is open to all qualified offerors, and the work must align with federal cybersecurity mandates for defense contractors handling controlled unclassified information.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339920
New
DIBBS
Secure Packaging and Preservation ServicesThe contract requires the provision of commercial-grade packaging and preservation services for water testers, ensuring compliance with military standards for shipment. This includes use of climate-controlled packaging methods suitable for CLNG or DRY environments, as well as application of preservation materials to safeguard equipment during transit. All items must be marked according to MMS No. 1 specifications to meet Department of Defense tracking and identification requirements. Performance is to be carried out at APO 96278-2069, with responses due by July 27, 2026. The procurement falls under NAICS code 339920, indicating a focus on other miscellaneous manufacturing, and is structured as a subcontract under the Medical Supply Chain FSH initiative. The effort is part of broader DOD logistics operations aimed at secure, compliant, and reliable delivery of critical testing equipment.
Sporting and Athletic Goods Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Compliance & LabelingThe contract requires full compliance with hazard communication standards under OSHA and DFARS regulations for a water testing device that may contain hazardous components. This includes authoring accurate safety data sheets and designing compliant hazard warning labels to ensure proper handling, storage, and transport of the product. The work is being performed under a subcontract through the Department of Defense’s Medical Supply Chain FSH, with the place of performance located at APO 96278-2069. Responses must be submitted by July 27, 2026, and the effort falls under NAICS code 541690, which covers other scientific and technical consulting services. Compliance must be fully documented and aligned with federal defense procurement requirements to meet all safety and regulatory obligations.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334510
New
DIBBS
Supply of Water Testing EquipmentThe contract involves the procurement and delivery of two units of a commercial off-the-shelf water tester identified by NSN 6630016039286, which must comply with military and federal specifications for performance, packaging, and labeling. This requirement is part of a subcontract under the Department of Defense’s Medical Supply Chain FSH, with the equipment destined for delivery to APO 96278-2069. The solicitation opened on July 19, 2026, and responses are due by July 27, 2026, under the NAICS code 334510, which corresponds to instrumentation manufacturing. The equipment must meet established technical standards without customization, ensuring compatibility and reliability in field operations. All packaging and labeling must adhere strictly to federal defense guidelines to facilitate inventory management and deployment. The contract does not include any set-aside provisions, indicating it is open to all qualified vendors.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Supply of End Plug for Viscometer in Oil Test CenterThe contract calls for the supply of a single end plug component designed for use in a viscometer at an oil test center, with all units required to meet stringent military packaging and labeling standards. This includes adherence to hazardous materials communication protocols, ensuring safe handling, storage, and transportation in accordance with defense regulations. The component is critical to the accurate operation of testing equipment, and its procurement is governed by technical specifications tied to military-grade performance and documentation requirements. The solicitation is categorized as a subcontract under NAICS code 332999 and is issued by the Department of Defense through the Medical Supply Chain FSH. Responses are due by July 27, 2026, with the contract set to be performed at a military post office address FPO, ZIP 96694. The posting date is July 19, 2026, indicating a narrow eight-day window for submission, and all interested parties must access the full solicitation details through the official DIBBS portal to ensure compliance with procedural and technical obligations.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
DIBBS
Regulatory & Quality Compliance ConsultingThis contract requires comprehensive regulatory and quality compliance consulting services to ensure adherence to MIL-STD-2073-1E for military packaging, the DLA Master List RA001 for item identification and management, and applicable FAR/DFARS clauses governing inspection, acceptance, and quality assurance protocols. The work is performance-based and must align with stringent Department of Defense standards to support the integrity of medical supply chain operations, with all activities centered at APO 09844. The subcontract is open for responses until July 27, 2026, and is categorized under NAICS code 541611 for management consulting services, reflecting the need for specialized expertise in federal defense compliance rather than direct procurement or manufacturing. Participation is not restricted by set-aside conditions, and the contracting activity falls under the Medical Supply Chain FSH office of the Department of Defense, emphasizing the critical nature of quality controls for medical materiel destined for military use.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
International Logistics & U.S.-Flag Vessel TransportationThe contract requires coordination of international shipping services using U.S.-flag vessels to transport goods to APO AE 09844, with final freight management to Larissa Military Airport in Greece. It falls under NAICS code 484220, indicating a focus on truck transportation and logistics services for military and defense purposes. The work is structured as a subcontract under the Department of Defense, specifically managed by the Medical Supply Chain FSH, and is part of a broader effort to support U.S. military logistics through compliance with U.S.-flag vessel requirements. The solicitation was posted on July 19, 2026, with responses due by July 27, 2026, and performance will center on ensuring timely, secure, and compliant delivery of medical and supply chain materials to designated military locations overseas.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & Covered Defense Information (CDI) SafeguardingThe contract requires the implementation of all NIST SP 800-171 security controls to safeguard covered defense information against unauthorized access, disclosure, or compromise. This includes establishing and maintaining robust cybersecurity measures such as access control, audit and accountability, configuration management, identification and authentication, media protection, personnel security, physical protection, risk assessment, system and communications protection, and system and information integrity. Compliance with these controls is mandatory to ensure the protection of sensitive government data handled under this agreement. In addition to securing the information, the contractor must report any cyber incidents affecting covered defense information within 72 hours of discovery. This reporting obligation is non-negotiable and requires immediate notification to the appropriate government authorities with full details of the incident, including the nature of the breach, impacted systems, and actions taken to mitigate damage. The contract is a subcontract under the Department of Defense, tied to NAICS code 541512, with performance located at APO 09844. Responses are due by July 27, 2026, and the requirement reflects a strict enforcement posture toward cybersecurity compliance in the defense supply chain.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Secure Packaging & Medical Marking ComplianceThe contract requires precise packaging and labeling services compliant with Medical Marking Standard No. 1, ensuring all items are marked with the National Stock Number, Commercial and Government Entity code, lot number, and accurate quantity information. This work is critical for military medical supply chain integrity and must be executed to exacting federal standards. The solicitation, issued under NAICS code 561910, is structured as a subcontract with a response deadline of July 27, 2026, and performance location set at APO 09844. The contracting entity is the Department of Defense through the Medical Supply Chain FSH office, indicating this effort supports defense medical logistics operations. All submissions must meet the specified marking requirements without deviation to ensure compatibility and traceability within the DoD inventory system.
Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires full adherence to OSHA’s Hazard Communication Standard for the packaging and handling of hazardous materials, ensuring that all components are properly labeled and accompanied by up-to-date Safety Data Sheets (SDS) to communicate chemical hazards effectively. Compliance involves the accurate maintenance and provision of SDS documentation for all hazardous substances involved in the supply chain, with emphasis on clear labeling protocols and worker safety training related to handling procedures. The work is classified under NAICS code 541620, indicating environmental consulting and related services, and is structured as a subcontract within the Department of Defense’s Medical Supply Chain framework. Performance is to be carried out at APO 09844, with submissions due by July 27, 2026, and the solicitation was posted on July 19, 2026. Although specific point of contact details are unavailable, the contract is accessible through the DIBBS platform for further information and response submission. The nature of the work demands rigorous documentation practices and operational diligence to meet federal safety standards, particularly in a military medical logistics context where material integrity and worker protection are critical.
Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
Supply of Graduated Filtering Flasks (4000 ML)The contract requires the procurement and delivery of two units of 4000 mL graduated filtering flasks, all of which must meet stringent medical and packaging standards to ensure safety, functionality, and compliance with healthcare requirements. The equipment is intended for use in a medical supply chain context under the Department of Defense, with performance specifically tied to the APO 09844 location. The solicitation, issued under NAICS code 339112 for medical appliance and supply manufacturing, is structured as a subcontract and was posted on July 19, 2026, with a firm response deadline of July 27, 2026. All submissions must align with the technical and regulatory expectations embedded in the medical device and packaging specifications to qualify for award.
Surgical and Medical Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325620
New
DIBBS
Sterile Dental Surgical Diamond Burs – Supply and DeliveryThe contract requires the supply and delivery of sterile, FDA-compliant Class I medical device diamond burs specifically designed for dental surgery, with all products pre-packaged to ensure sterility and traceability aligned with military medical standards. These burs must meet stringent regulatory and quality requirements to support operational dental care within U.S. military healthcare facilities, and each unit must be individually traceable to maintain compliance with defense supply chain protocols. Delivery is to be made to a military postal address designated as FPO with ZIP code 96672-4090, indicating distribution directly to deployed or remote personnel. The solicitation falls under NAICS code 325620 for medical and dental instrument manufacturing and is issued as a subcontract by the Department of Defense through the Medical Supply Chain FSH office. Responses are due by July 27, 2026, with the request posted on July 19, 2026, allowing a narrow eight-day window for submissions. The contract demands full adherence to both FDA guidelines for Class I devices and Department of Defense logistical and documentation standards, ensuring that every unit is properly labeled, documented, and ready for immediate use in clinical environments without requiring additional sterilization or inspection upon receipt.
Toilet Preparation Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details