Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FILTER, INDICATOR LIGHT

Active
SPE4A6-26-T-07LMFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 140 units of FILTER, INDICATOR LIGHT with NSN 6210013413940 under solicitation SPE4A6-26-T-07LM, issued by the Defense Logistics Agency’s ASC Commodities Division. The item is classified as a critical application, and the contract specifies a fixed-price structure with a total value of $19,600 at $140.000 per unit. Delivery is required within 145 days from the award date, with a target ship date of December 20, 2026, and delivery must be made FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, governed by zero-defect sampling criteria per MIL-STD-1916 or equivalent, where critical attributes require a verification level of VII or AQL of 0.1, major attributes IV or AQL 1.0, and minor attributes II or AQL 4.0; unspecified attributes are treated as major unless otherwise defined. Packaging and marking must strictly comply with MIL-STD-2073-1E and DLA Packaging Requirements RP001, with preservation methods identified by code 10, unit container D3, intermediate container E5, and pack code U. Labeling follows MIL-STD-129, including the special marking code 01-01 for Fragile, and requires barcoding using USS-128 or Data Matrix. The item is subject to multiple DFARS clauses addressing cybersecurity safeguards, hazardous materials prohibitions including hexavalent chromium, trafficking in persons, whistleblower protections, and restrictions on telecommunications equipment from adversary nations. Compliance with the Hazard Communication Standard and accurate safety data sheet provision is mandatory. The contract mandates electronic invoicing through Wide Area WorkFlow and prohibits unauthorized obligations or modifications without formal approval. Offerors must provide their Unique Entity Identifier and CAGE Code and represent their small business status via SAM.gov, though no specific socioeconomic certifications are confirmed in the solicitation. All technical and quality requirements are tied to the DLA Master List of Technical and Quality Requirements and incorporated by reference, with revisions controlled based on solicitation issuance or award date depending on acquisition size.

General Info

140 filter units with indicator light, NSN 6210-01-341-3940, FOB origin, delivery in 145 days, strict DLA packaging and zero-defect acceptance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335139 - Electric Lamp Bulb and Other Lighting Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07LM DLA Aviation Jul 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
VICTORIA BURCHAM
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILTER,INDICATOR LIGHT
FILTER,INDICATOR LIGHT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
ASCO L.P. 9CHN6 P/N R431007057
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-07LM
SECTION B
PR: 7017528422 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528422 0001 EA 140.000
NSN/MATERIAL:6210013413940
DELIVERY (IN DAYS):0145
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:01 -01 Fragile
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/20/2026 Original Required Delivery Date:10/14/2026
SPE4A6-26-T-07LM NSN/Part Number: 6210-01-341-3940 Quantity: 140 EA Purchase Request: 7017528422QTY: 140 Delivery: 145 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335139
New
DIBBS
LAMP, INCANDESCENTThe contract pertains to the procurement of five incandescent lamps with NSN 6240-01-054-6996 and part number 687-19, sourced from approved suppliers Grimes Aerospace Company and WAMCO Inc. The unit price is $5.00 per unit, totaling $25.00, with delivery required in 198 days FOB origin to Industries of the Blind Inc. at 6920 West Market Street, Greensboro, NC 27409. All items must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific packaging data coded for preservation, wrapping, and containers, and all marking must conform to MIL-STD-129 with no special marking applied. Palletization follows RP001 standards, and sampling for quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required in the sample unless otherwise stipulated. Attributes are assigned verification levels or AQLs per classification, and unspecified attributes are treated as major. Documentation for source approval is required under RC001, and the item is designated as a critical application item. The contract is issued under solicitation SPE4A6-26-T-07VN with a response deadline of July 28, 2026, and the delivery must occur no later than February 12, 2027. Inspection and acceptance are both conducted at the destination, with no tolerance permitted for quantity variance. Transportation logistics are governed by DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
Supply of FOCUS ASSEMBLY, SEARCHLIGHT (COTS Item)The contract requires the procurement and delivery of three units of the FOCUS ASSEMBLY, SEARCHLIGHT, identified by NSN 6230-01-186-9875 and Part Number PL7261-RF, manufactured by Carlisle & Finch Co. The items are classified as commercial off-the-shelf (COTS) and must be delivered within five days of contract award, emphasizing a rapid turnaround. The solicitation falls under the NAICS code 335139, indicating its classification within the broader category of other electrical equipment and component manufacturing. The contract is structured as a subcontract under the Department of Defense, specifically managed by the AVIATION SUPPLY CHAIN ESOC BUYS, with performance targeted to a military postal address in FPO, 96698. The proposal response deadline is set for July 27, 2026, with the solicitation posted on July 19, 2026, allowing a limited window for vendor submissions. This opportunity is not subject to any specific set-aside provisions and is open to qualified vendors capable of meeting the stringent delivery timeline and technical specifications.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
Manufacturing of Incandescent LampsThe contract calls for the production of 33 units of incandescent lamps identified by NSN 6240-00-163-5143, with all items required to meet the Department of Defense’s technical and quality standards for commercial off-the-shelf products, including additional enhanced quality controls specific to military use. The work must be performed in compliance with established specifications to ensure reliability and performance under operational conditions, despite the commercial nature of the product. The solicitation, issued under the NAICS code 335139 for other lighting equipment manufacturing, is structured as a subcontract and was posted on July 19, 2026, with proposals due by July 27, 2026. Performance is slated to occur in Phoenix, Arizona, under the oversight of the ASC Commodities Division within the Department of Defense. The contract opportunity is accessible via the DIBBS system, and all deliverables must satisfy stringent military-grade requirements even though the lamps are commercial in origin.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
Incandescent Lamp Supply (COTS Item)The contract calls for the supply of 37 units of incandescent lamps identified by NSN 6240013389079 and part number AT135758, classified as commercial off-the-shelf items that meet military specifications. These lamps are to be delivered as a subcontract under the auspices of the ASC Commodities Division within the Department of Defense, with performance required at Greensboro, North Carolina, ZIP code 27409. The solicitation was posted on July 19, 2026, and responses are due by July 27, 2026, indicating a narrow eight-day window for submissions. The NAICS code 335139 corresponds to other lighting equipment manufacturing, confirming the industrial category under which this procurement falls. All items must comply with applicable military standards despite being COTS, ensuring they are suitable for use in defense-related applications without requiring customization or special adaptation.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
Manufacture and Supply of BASE, LAMPHOLDER (NSN: 6250-01-532-2278)The contract requires the manufacture, quality assurance, packaging, and delivery of 163 units of BASE, LAMPHOLDER identified by NSN 6250-01-532-2278, all produced in full compliance with military specifications. Each unit must be manufactured to meet stringent technical standards, with quality control enforced through MIL-STD-1916 inspection protocols and an Acceptable Quality Level of 0.1, ensuring extremely low defect tolerance. Packaging must adhere to MIL-STD-2073-1E guidelines for preservation and protection during transport, and each unit must be labeled and marked according to MIL-STD-129 for proper military logistics identification. The product is to be delivered to a performance location in Phoenix, Arizona, 85043, under a subcontract arrangement issued by the ASC Commodities Division within the Department of Defense. All work must be completed and submitted no later than the response deadline of July 27, 2026, with production expected to follow the NAICS code 335139 for other electrical equipment and component manufacturing.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
Manufacture and Supply of Defense-Grade Indicator Light Filter (NSN: 6210013413940)The contract mandates full production, packaging, labeling, and delivery of 140 units of a military-specification indicator light filter identified by NSN 6210013413940 under DLA contract SPE4A6-26-T-07LM. All work must adhere strictly to defense standards, ensuring the product meets the rigorous performance, durability, and safety requirements expected for military applications. The contractor is responsible for end-to-end execution, from manufacturing to final packaging and labeling, with precise attention to specifications to guarantee compatibility and reliability in operational environments. Delivery must be completed to the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, and is classified as a subcontract under NAICS code 335139, which pertains to other electrical equipment and component manufacturing. The agency overseeing the contract is the ASC Commodities Division within the Department of Defense, indicating the item is intended for use by U.S. military forces. Although the solicitation number and point of contact details are not provided, the contract is accessible via the DIBBS portal. Compliance with all defense regulations, timely delivery, and accurate electronic invoicing are critical to meeting contractual obligations and ensuring full payment and acceptance by the government.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
FOCUS ASSEMBLY, SEARThis contract, issued under solicitation number SPE4A0-26-T-3949, pertains to the procurement of a commercial off-the-shelf item identified by NSN 6230-01-186-9875 and part number PL7261-RF, manufactured by Carlisle & Finch Co. The item is classified as a critical application component and must be delivered in a quantity of three units within five days of contract award, with delivery terms set as FOB destination. All supplies must strictly comply with DLA packaging requirements, including MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for marking, with special fragile labeling required. Mercury and mercury-containing compounds are explicitly prohibited from direct contact with the item or its packaging, with limited exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must include shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The contract prohibits the use of mercury in preservation, packaging, and marking processes. Shipment must be facilitated via traceable transport methods, not parcel post, to the vessel USS HENRY M JACKSON SSBN 730 at FPO AP 96698, with the original delivery deadline set for June 25, 2026. Documentation must adhere to DLA’s Master List of Technical and Quality Requirements, and all units are subject to inspection and acceptance at the destination point. The purchase request number is 7017496014, and quantity variance is strictly zero percent.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENTThe contract is for the procurement of incandescent lamps classified as commercial off-the-shelf (COTS) items with the National Stock Number 6240013389079 and part number AT135758, sourced under solicitation SPE4A6-26-T-07MZ. The order consists of two contract line items (CLINs) totaling 37 units, with 18 units priced at $18.00 each and 19 units at $19.00 each, resulting in a total estimated value of $685.00. Delivery is scheduled for FOB origin with a 169-day lead time after order placement, with an original required delivery date of November 2, 2026, and a need-to-ship date of January 13, 2027. Items must be delivered to two designated locations: Industries of the Blind in Greensboro, North Carolina, and Arizona Industries for the Blind in Phoenix, Arizona. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must strictly follow MIL-STD-2073-1E, including preservation method 10 (clean/dry) with no additional preservation or wrapping materials, and must be palletized according to DLA’s RP001 requirements. Marking must comply with MIL-STD-129, incorporating the NSN, CLIN, and special fragile handling code, with mandatory machine-readable barcoding for traceability. The contract incorporates multiple Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses, including those related to cybersecurity (252.204-7012, 52.240-93), combating trafficking in persons, employment eligibility verification, sustainable products, hazardous materials identification, whistleblower protections, and safeguarding government information systems. Contractors are required to comply with the Defense Priorities and Allocations System (DPAS) for national defense prioritization and must submit all proposals electronically through the DLA Internet Bid Board System (DIBBS) by the July 27, 2026 deadline. Invoicing must be performed exclusively via WAWF, and payment information, including DoDAAC codes, will be determined upon award. The solicitation includes representations and certifications mandatory for offerors, including UEI and CAGE code disclosure, small business status, and socioeconomic
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENTThe contract is for 33 incandescent lamps identified by NSN 6240-00-163-5143 under solicitation SPE4A6-26-T-07LX, issued by the Defense Logistics Agency’s Commodity Division under the Department of Defense. The item is classified as a commercial off-the-shelf product with tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and it must comply with DLA packaging standards and physical identification markings. Technical and quality specifications referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the scale of acquisition. Inspection and acceptance must occur at origin, and government identification must be removed from non-accepted supplies. The procurement is subject to Covered Defense Information provisions, and commercial catalog data is deemed adequate for this acquisition. Delivery is required within 169 days from award, with performance located in Phoenix, Arizona 85043. The solicitation was posted on July 19, 2026, and responses are due by July 27, 2026. Primary point of contact is Roberto Roldan at the provided email and phone number.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
BASE, LAMPHOLDERThe contract specifies the procurement of 163 units of a BASE, LAMPHOLDER with NSN 6250-01-532-2278 under solicitation SPE4A6-26-T-07NH, with a delivery deadline of 169 days from award. The item is classified as a commercial item and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. Physical identification and bare item marking are mandated, and no shelf life requirement applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise directed, and verification levels for attributes are strictly defined as VII, IV, and II for critical, major, and minor characteristics respectively. The supplier must be certified to CMMC Level 2 and adhere to DLA packaging standards and removal protocols for government identification from non-accepted supplies. The contract imposes export control measures under ITAR or EAR, restricting technical data disclosure to foreign persons regardless of location and requiring DFARS 252.225-7048 compliance. Access to controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA export control training, and formal authorization from DLA. Inspection and acceptance must occur at the manufacturer’s origin, and tailored higher-level quality requirements apply equally to manufacturers and non-manufacturers. Covered defense information protections are in force, and the place of performance is Phoenix, Arizona. The contracting office is the ASC Commodities Division of the Department of Defense, with Chinh Le listed as the primary point of contact, and the solicitation closed on July 27, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
Supply of Indicator Light (NSN 6210016516804)The contract mandates the procurement and delivery of one military-specification indicator light identified by NSN 6210016516804, adhering strictly to OSHA safety standards, MIL-STD-129 for military marking and packaging, and all applicable hazardous materials regulations. Delivery must be completed FOB Destination no later than August 31, 2026, ensuring the item arrives at the designated location in full compliance with all technical and logistical requirements. The contract is classified as a subcontract under the NAICS code 335139 and is administered by the Defense Logistics Agency under the Department of Defense. While no solicitation number is provided, the award is linked to contract SPE8E726V0896, and performance is subject to federal defense procurement protocols without a specified set-aside classification.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 335139
New
DIBBS
Supplier of Indicator Light (NSN 6210014836350)The contract requires the supply of an exact replacement for the indicator light identified by NSN 6210014836350, adhering strictly to the technical specifications, quality standards, and counterfeit avoidance protocols established by the Defense Logistics Agency. This item is critical for military systems and must be manufactured or sourced to ensure full compliance with Department of Defense requirements, including rigorous testing and documentation to prevent the introduction of nonconforming or fraudulent components. The contract is structured as a subcontract under NAICS code 335139, which pertains to other electrical equipment and component manufacturing, indicating the specialized nature of the production involved. Performance of this contract aligns with DLA’s broader mission to sustain military readiness through reliable supply chain management. The supplier must guarantee consistent quality across all delivered units, maintain traceability of materials and manufacturing processes, and comply with all applicable defense contracting mandates regarding authenticity and lifecycle support. Although specific delivery locations or point of contact details are not provided, the contract is linked through DLA’s procurement system, suggesting active oversight and potential for future modifications or follow-on requirements based on operational needs.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA standards for hazard communication regarding pins or packaging that may contain hazardous substances, mandating the provision of Material Safety Data Sheets and appropriate hazard warning labels. All elements of communication must align with federal safety regulations to ensure proper identification and handling of chemical risks associated with the products. The work is governed under NAICS code 541690 and is structured as a subcontract awarded by the ASC Commodities Division of the Department of Defense, with performance expected at a facility in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Interested parties must submit responses by the deadline of July 28, 2026, following the solicitation posted on July 20, 2026, through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CDI SafeguardingThe contract requires implementation of NIST SP 800-171 security controls to safeguard Covered Defense Information handled by the contractor, ensuring compliance with federal cybersecurity standards for protecting sensitive unclassified information related to DoD operations. All systems and processes must be configured to meet the full scope of the NIST framework, including access control, audit accountability, incident response, and data encryption, to mitigate risks associated with unauthorized access or data breaches. The contractor is obligated to detect, report, and respond to any cyber incident involving Covered Defense Information within 72 hours of discovery, following established DoD protocols for incident reporting and forensic documentation. This subcontract, issued by the ASC Commodities Division under the Department of Defense, pertains to work performed at the place of performance in New Cumberland, Pennsylvania, with a NAICS code of 541512 indicating IT services and related consulting. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with no set-aside classification specified. Compliance with the contractual cybersecurity mandates is non-negotiable and directly tied to the contractor’s ability to handle federal defense information. Failure to adhere to the required controls or timely incident reporting may result in contract termination, penalties, or loss of eligibility for future DoD work.
Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Shipping of Defense SuppliesThe contract requires the transport and delivery of packaged defense fasteners within 144 days, adhering strictly to military shipping standards and mandatory WAWF reporting protocols. The scope encompasses both domestic and international shipping operations, ensuring timely and compliant movement of critical defense supplies to the designated performance location in New Cumberland, Pennsylvania, with the zip code 17070-5002. All logistics must align with the NAICS code 484220, which classifies the activity under truck transportation of freight. The contract is structured as a subcontract under the ASC Commodities Division of the Department of Defense, with a response deadline set for July 28, 2026, and the solicitation was posted on July 20, 2026. Compliance with defense logistics regulations and accurate documentation through WAWF are non-negotiable requirements for successful contract execution.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541330
New
DIBBS
Inspection and Quality Assurance at OriginThe contract requires comprehensive inspection and quality assurance services at the manufacturing site in New Cumberland, Pennsylvania, with a focus on first-article and lot acceptance inspections conducted in accordance with MIL-STD-1916. This includes the verification of all critical, major, and minor product attributes to ensure compliance with established military standards. The work is structured as a subcontract under the NAICS code 541330, indicating engineering and technical services, and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and the performance location is fixed at the specified zip code 17070-5002. All inspection activities must be carried out on-site at the origin to validate conformity before lot release, ensuring product integrity and adherence to defense quality requirements.
Engineering Services

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and LabelingThe contract requires compliance with MIL-STD-129 and ASTM D3951 for the packaging, marking, and labeling of military fasteners, ensuring adherence to standardized military specifications for traceability, durability, and uniformity. All packaging must include accurate identification data, barcoding, and proper handling instructions as mandated by these standards, with additional requirements for hazardous material communication if the fasteners or associated components contain regulated substances. The work must be performed in alignment with Department of Defense protocols and delivered to the specified place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002. This is a subcontract opportunity under NAICS code 493190, and responses are due by July 28, 2026, with the solicitation posted on July 20, 2026, through the DIBBS system.
Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
Precision Fastener ManufacturingThe contract involves the manufacture of 891 precision straight headed pins to meet stringent military specifications NASM20392 and NASM5673, intended for critical aerospace applications where reliability and exacting standards are paramount. The work requires adherence to exact dimensional, material, and finish requirements dictated by these military standards, ensuring performance under extreme operational conditions. All units must be produced in compliance with quality control protocols consistent with defense sector expectations, with final inspection and documentation to verify conformance before delivery. The contract is classified as a subcontract under NAICS code 332510 for forging and stamping, and is solicited by the ASC Commodities Division of the Department of Defense. Proposals are due by July 28, 2026, with the place of performance designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The solicitation was posted on July 20, 2026, and is accessible through the DIBBS platform, indicating the procurement is part of the Defense Logistics Agency’s supply chain infrastructure to support national defense aerospace needs.
Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 483111
New
DIBBS
International Freight and Defense Logistics ShippingThe contract entails the international ocean transportation of goods to FPO AP 96349 in Yokosuka, Japan, with full responsibility for customs clearance and adherence to DPAS compliance requirements. All shipping must be conducted using vessels approved by the relevant defense logistics authorities, ensuring secure and regulated movement of materials. The work falls under NAICS code 483111, classifying it as ocean freight transportation, and is structured as a subcontract within the Department of Defense’s supply chain framework managed by the ASC Commodities Division. Responses are due by July 28, 2026, following a posting date of July 20, 2026, and the solicitation is associated with a DIBBS platform link for official submission and documentation. The place of performance is designated as a military postal address in Japan, indicating the delivery is destined for U.S. military personnel or facilities there. Compliance with defense logistics standards is non-negotiable, and contractors must demonstrate the ability to meet stringent transportation, documentation, and security mandates specific to government-furnished cargo under international shipping protocols.
Deep Sea Freight Transportation

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CMMC Assessment SupportThe contract supports ongoing maintenance of CMMC Level 2 compliance for systems and processes under the Department of Defense, requiring full alignment with cybersecurity requirements including regular system audits, thorough documentation of security controls, timely incident reporting, and active coordination with certified third-party assessment organizations. The work involves ensuring that all security practices remain current, documented, and verifiable to meet federal standards for protecting controlled unclassified information. Performance is tied to a military postal address in FPO with a zip code of 96349, and the effort is structured as a subcontract under NAICS code 541512, indicating it falls within the category of computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and is managed by the ASC Commodities Division. The scope demands continuous compliance vigilance and clear communication with external assessors to maintain certification readiness.
Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541611
New
DIBBS
Export-Controlled Technical Data Handling and ComplianceThe contract pertains to the management of ITAR and EAR-controlled technical data, requiring strict adherence to U.S. export control regulations. Responsibilities include implementing access controls to ensure only authorized personnel can handle sensitive information, delivering comprehensive training programs to personnel on compliance protocols, and maintaining full alignment with federal export control requirements, particularly regarding access by foreign persons. The work is critical to safeguarding controlled technical data and preventing unauthorized disclosures that could violate international trade laws. This is a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, with performance to be conducted at FPO, ZIP 96349. The solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, and is classified under NAICS code 541611, indicating it involves management consulting services related to regulatory compliance. The contract underscores the necessity of robust internal controls, continuous compliance monitoring, and thorough documentation to meet defense sector standards for handling sensitive technical data.
Administrative Management and General Management Consulting Services

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 493190
New
DIBBS
Defense-Compliant Packaging and Labeling ServicesThe contract requires full compliance with military-standard packaging and labeling procedures for welded studs as specified in MIL-STD-129, ensuring all items are properly identified, documented, and prepared for military logistics and distribution. This includes accurate labeling with required barcodes, unit packs, and container markings consistent with Department of Defense standards, along with adherence to hazard communication protocols to ensure safety during handling and transport. Any items that fail inspection or are rejected must have all government-specific markings removed prior to any further disposition to protect sensitive information and maintain security protocols. The work must be performed in alignment with the NAICS code 493190 and delivered to the designated place of performance at FPO with zip code 96349. Proposals are due by July 28, 2026, and the contract is classified as a subcontract under the ASC Commodities Division of the Department of Defense.
Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Precision Welded Stud ManufacturingThe contract requires full-cycle manufacturing of 31 welding studs with NSN 5307-01-722-3367, strictly adhering to DLA technical specifications. The work encompasses all stages of production including machining, welding, inspection, packaging, and delivery, ensuring the final products meet military-grade quality and performance standards. All manufacturing activities must be completed in compliance with the detailed requirements outlined by the Department of Defense through the ASC Commodities Division. This is a subcontract opportunity with a NAICS code of 332722 for precision forged and stamped metal products. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026. The place of performance is designated as FPO with a ZIP code of 96349, indicating delivery to a military postal address. The contract does not specify a set-aside status, and while the point of contact information is not provided, interested parties can access further details through the official DIBBS procurement portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 811212
New
DIBBS
Quality Inspection & Origin Acceptance SupportThe contract requires support for government-origin inspection activities, focusing on maintaining accurate records, preparing detailed test reports, and ensuring strict adherence to MIL-STD-1916 or ASQ H1331 sampling plans to validate product compliance. All work must be performed at the designated place of performance in FPO with zip code 96306-1204, and the contractor is expected to deliver consistent quality assurance procedures aligned with Department of Defense standards. The effort is structured as a subcontract under NAICS code 811212, with a response deadline of July 28, 2026, and was posted on July 20, 2026, by the ASC Commodities Division of the Department of Defense. While no specific set-aside status or point of contact is provided, the solicitation is accessible through the DIBBS platform for interested parties to review full requirements and submit proposals.
Computer and Office Machine Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details