Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

FILTER, RADIO FREQUENCY

Active
SPE7M5-26-T-480QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M5-26-T-480Q is a Request for Quotations issued by the DLA Land and Maritime Active Devices Division for the procurement of eight radio frequency interference filters, identified by NSN 5915-01-107-0334. The requirement is classified as a critical application item and must meet the specifications of the cited technical data and part-numbered item list. Delivery is required by February 28, 2027, with a need ship date of March 9, 2027, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will take place at the destination. The contract incorporates several stringent technical and regulatory requirements, including the DLA Master List of Technical and Quality Requirements and CMMC Level 2 Self-Assessment. Environmental restrictions prohibit the use of Class I ozone-depleting substances without written approval. Packaging must adhere to RP001 DLA Packaging Requirements and MIL-STD-129 for marking and labeling, with specific hazard communication standards applying to any hazardous materials. All quotes must be submitted via the DIBBS portal by September 21, 2026, and must comply with the Buy American Act, the Berry Amendment, and DFARS restrictions on covered defense telecommunications equipment. Invoicing and payment are to be processed electronically through the Wide Area Workflow system.

General Info

DLA seeks eight RF interference filters by February 28, 2027, via DIBBS portal.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-480Q Request for Quotations

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA

Full Description

Show more
FILTER,RADIO FREQUENCY INTERFERENCE
FILTER,RADIO FREQUENCY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
VENDOR ITEM CONTROL DRAWING (NEW CODE)
CRITICAL APPLICATION ITEM
LINDGREN RF ENCLOSURES INC ELMAG 23160 P/N E-1892 BAE SYSTEMS INFORMATION AND ELECTRONIC 94117 P/N EMI-F-0641 LCR ELECTRONICS, INC 0AM43 P/N F-15910 MTK ELECTRONICS INC 59901 P/N M1590
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7M5-26-T-480Q
SECTION B
PR: 7018273336 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018273336 0001 EA 8.000
NSN/MATERIAL:5915011070334
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/09/2027 Original Required Delivery Date:02/28/2027
SPE7M5-26-T-480Q
SECTION B
PR: 7018273336 PRLI: 0001 CONT’D

SPE7M5-26-T-480Q NSN/Part Number: 5915-01-107-0334 Quantity: 8 EA Purchase Request: 7018273336QTY: 8 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
SHOE, JACK-SUPPORT
Solicitation # SPE7LX-26-T-1117
Solicitation SPE7LX-26-T-1117 is a Request for Quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of 97 units of Jack-Support Shoes (NSN 4940-01-678-9226). This is a total small business set-aside under NAICS 334419, with a specific preference for JLTVCI Small Business Prime Contract holders. The procurement requires adherence to multiple technical drawings and quality standards, including the DLA Master List of Technical and Quality Requirements. Delivery is specified as FOB Origin with a delivery period of 168 days, and the items are to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following RP001 requirements. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Award decisions will be based on fair and reasonable pricing, quality, and delivery terms, with the potential to convert to a FAR Part 13 Simplified Acquisition if initial pricing is not found to be fair and reasonable.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334419
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-455B
Solicitation SPE7M5-26-T-455B, issued by DLA Land and Maritime Active Devices Division, is a request for quotations for four linear microcircuits, identified by NSN 5962012477674 and part number HI1-5047A/883 from Renesas Electronics America Inc. The procurement is for a critical application item and is categorized as a commercial item. Delivery is required within 143 days, with a need ship date of February 2, 2027, and a final required delivery date of July 1, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution DDWO in Columbus, Ohio. The contract imposes stringent quality and technical requirements, including CMMC Level 2 self-assessment and strict supply chain traceability. Contractors must provide DLA Land and Maritime Form 918 and associated traceability or test reports at least 15 days prior to the delivery date to receive shipping authorization. Packaging must adhere to MIL-STD-2073-1E and MIL-PRF-81705 for ESD and EMI protection, with specific cushioning requirements per A-A-59136 to prevent lead damage. Marking must comply with MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Additionally, the contractor must ensure that mercury is not intentionally added to the hardware and must comply with the Buy American and Balance of Payments Program. All quotes must be submitted via the DIBBS portal by September 11, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7M5-26-U-0065
Solicitation SPE7M5-26-U-0065 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Active Devices Division, for the procurement of 3,182 spiral wound gaskets under NSN 5330-00-348-9152. This is a total small business set-aside under NAICS code 339991, structured as a unilateral indefinite delivery contract with a maximum value of 350,000 dollars. The delivery requirement is 63 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including RA001, RP001, and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved JCP certification and specific DLA training. Additionally, the item must be free of asbestos per FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act and Berry Amendment, and those utilizing non-domestic materials must provide full disclosure. Quotes are due by September 11, 2026, via the DIBBS portal, and must not utilize additive manufacturing unless specifically authorized.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS