FILTER, WRATTEN

FILTER,WRATTEN
FILTER, WRATTEN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
WRATTEN FILTERS SHALL BE DISPOSABLE, AND SHALL
BE CUT TO SIZE AND CALIBRATED. SHALL BE
SUITABLE FOR USE IN CONTAMINATED FUEL DETECTOR
FOR COMBINED CONTAMINATION OF FUEL.
.
WRATTEN FILTERS SHALL BE PROCURED AND MATCHED
WITH THE SAME MANUFACTURER THAT SUPPLIED THE
DETECTOR. THE ORIGINAL FILTER SET SHALL BE
CALIBRATED BY THE MANUFACTURER OF THE DETECTOR<(>,<)>
WHICH SHALL BE PROVIDED WITH A CHART FOR USE TO
MATCH WITH FUTURE PURCHASES OF FILTER SETS.
.
.
SHALL BE IN ACCORDANCE WITH MIL-D-22612C DATED
30 JULY 1980, EXCEPT AS FOLLOWS:
.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
PARA. 2.1, UNDER "STANDARDS MILITARY" DELETE
MIL-SD-794 ENTIRELY; ADD THE FOLLOWING NEW
CATEGORY:
. "MEDICAL MARKING STANDARD NO. 1"
.
ADD THE FOLLOWING NEW PARAGRAPH:
"2.3 NON-GOVERNMENT DOCUMENTS. THE FOLLOWING
PUBLICATIONS FORM A PART OF THIS DOCUMENT TO ,,,,,,,,
THE EXTENT SPECIFIED HEREIN.
. "ASTM INTERNATIONAL
. "D 1974 STANDARD PRACTICE FOR METHODS OF
. CLOSING, SEALING, AND REINFORCING
. FIBERBOARD SHIPPING BOXES
. "D 5118 STANDARD PRACTICE FOR FABRICATION
. OF FIBERBOARD SHIPPING BOXES
SPE2DH-26-T-3240
SECTION B
."(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO ASTM
INTERNATIONAL, 100 BARR HARBOR DRIVE, WEST
CONSHOHOCKEN, PA 19428-2959.)"
.
DELETE PARAS. 5. THROUGH 5.2 ENTIRELY AND
SUBSTITUTE:
.
"5. PACKAGING.
.
"5.1 PRESERVATION. PRESERVATION SHALL BE
MILITARY, AS SPECIFIED.
.
"5.1.1 UNIT. SET (SE). ONE SET CONTAINING 2
INDIVIDUALLY PACKAGED WRATTEN FILTERS, AS
SPECIFIED, CONSTITUTES ONE UNIT. EACH WRATTEN
FILTER SHALL BE SUPPLIED IN A SEALED SILVER
FOIL WRAPPING. WRAPPING SHALL PROTECT THE
CONTENTS FROM EXPOSURE TO DUST. EACH SET
SHALL BE PACKAGED IN A SUITABLE SEALED UNIT
CONTAINER.
.
"5.2 PACKING. PACKING SHALL BE LEVEL A OR
B, AS SPECIFIED. QUANTITY OF UNITS PACKED IN
EACH EXTERIOR (SHIPPING) CONTAINER MAY BE
DETERMINED BY THE SUPPLIER.
.
"5.2.1 LEVEL A. A QUANTITY OF UNITS SHALL BE
PACKED IN AN EXTERIOR (SHIPPING) CONTAINER
DESIGNED FOR A TYPE 2 LOAD AND CONFORMING TO
ASTM D 5118, CLASS WEATHER-RESISTANT. CLOSURE
AND STRAPPING SHALL BE A SPECIFIED IN
ASTM D 1974, CLOSURE METHOD 1D. FIBERBOARD BOX
SHALL BE WATER-RESISTANT AS SPECIFIED IN
ASTM D 5118.
.
"5.2.2 LEVEL B. A QUANTITY OF UNITS SHALL BE
PACKED IN AN EXTERIOR (SHIPPING) CONTAINER
DESIGNED FOR A TYPE 2 LOAD AND CONFORMING TO
ASTM D 5118, CLASS DOMESTIC. CLOSURE SHALL BE
AS SPECIFIED IN ASTM D 1974, CLOSURE METHOD 1E.
.
"5.2.3 UNITIZATION. MATERIAL SHALL BE UNITIZED
AS SPECIFIED IN THE CONTRACT OR ORDER.
.
"5.3 MARKING.
.
"5.3.1 UNIT. EACH UNIT (SET) SHALL BE MARKED
AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1
FOR MILITARY MATERIAL.
.
"5.3.2 EXTERIOR (SHIPPING) CONTAINER AND
UNITIZED LOAD. EACH EXTERIOR (SHIPPING)
CONTAINER AND UNITIZED LOAD SHALL BE MARKED AS
SPECIFIED IN MEDICAL MARKING STANDARD NO. 1.
.
6630-00-849-5288 5 AUGUST 2005
THIS ITEM IS NOT REGULATED BY THE FDA
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
SPE2DH-26-T-3240
SECTION B
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
CRITICAL APPLICATION ITEM
TELECTRO-MEK INC 16058 P/N 200509-5
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016438779 0001 SE 84.000
NSN/MATERIAL:6630008495288
DELIVERY (IN DAYS):0045
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPECIAL NSN/Part Number: 6630-00-849-5288 Quantity: 84 SE Purchase Request: 7016438779QTY: 84 Delivery: 45 days ADO