Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FIREMAN'S COAT

Active
SPE8E6-26-T-4077Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 43 Fireman’s Coats under NSN 4210-01-545-6376 and part number GSADLA002000928810-42X32-TAILS, with a unit price of $43.00 and a total contract value of $1,859. The item is classified as a Type I (Code S) shelf-life item with a non-extendable shelf life of 60 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, including the special marking code 32 for Type I shelf life. Delivery is required FOB origin within 167 days of contract award, with inspection and acceptance occurring at the destination facility located at DLA Dist San Joaquin in Tracy, California. The quantity variance is strictly zero, meaning no over or under shipment is permitted. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and protective industrial products must adhere to DLA packaging standards. The contract applies to defense information under RD003 and mandates full compliance with documentation procedures for source approval and removal of government identification from non-accepted supplies. The required delivery date was originally November 25, 2026, with a need ship date of February 1, 2027, and the contract was solicited under SPE8E6-26-T-4077, with response submissions due by August 17, 2026. All units of issue follow DoD standards, and transportation logistics adhere to DLA Procurement Notes C19 and C20.

General Info

43 Fireman’s Coats at $43 each, FOB origin, 60-month shelf life, delivery to Tracy, CA by Feb 1, 2027.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE8E6-26-T-4077.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
John Lieb
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FIREMAN'S COAT
FIREMAN'S COAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
"DLA does not have a bidset available"
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
PROTECTIVE INDUSTRIAL PRODUCTS, INC. 13TF7 P/N GSADLA002000928810-42X32-TAILS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757056 0001 EA 43.000
NSN/MATERIAL:4210015456376
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE8E6-26-T-4077
SECTION B
PR: 7017757056 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:02/01/2027 Original Required Delivery Date:11/25/2026
SPE8E6-26-T-4077 NSN/Part Number: 4210-01-545-6376 Quantity: 43 EA Purchase Request: 7017757056QTY: 43 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325998
New
DIBBS
Additive Manufacturing Filament SupplyThe contract seeks the supply of industrial-grade filament specifically engineered for additive manufacturing systems used in defense applications, with all materials required to comply with federal logistics and defense supply chain standards. This subcontract is a total small business set-aside under the SBA program, meaning only qualified small businesses may bid, and the NAICS code 325998 identifies the category as other chemical product and preparation manufacturing. The performance location is designated as Tinker Air Force Base with a zip code of 73145-8000, indicating the filament will be delivered directly to a critical Department of Defense facility. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the contract is managed under the Department of Defense through the Depot Oklahoma office, emphasizing the strict quality and compliance controls expected for materials used in military-grade 3D printing operations.
DEPOT OKLAHOMA

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
DIBBS
Supply of Hazardous Material (Fire Extinguisher Recharge/Refill)The contract involves the supply and delivery of a hazardous fire extinguisher recharge agent identified by NSN 6515016268953, intended for use in military and federal operations. All packaging and labeling must strictly adhere to OSHA and MIL-STD-129 standards to ensure proper hazard communication, handling, and traceability throughout the supply chain. The material is classified as hazardous, requiring specialized handling procedures and compliance with federal safety and transportation regulations. Performance of the contract is located at HURLBURT FIELD with a postal code of 32544-5668, and the work falls under the NAICS code 325998 for other chemical product and preparation manufacturing. The solicitation is structured as a subcontract under the Department of Defense, managed by the MEDICAL SUPPLY CHAIN MD SURG FSF, and was posted on August 5, 2026, with a response deadline of August 11, 2026. There is no designated set-aside status, indicating the opportunity is open to all qualified vendors regardless of business size or ownership category. Interested parties must submit proposals through the DIBBS platform via the specified UI link. Timeliness and full compliance with hazardous materials regulations are critical, as non-compliance may result in rejection of the bid or contract termination.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325998
New
DIBBS
DECAL
Solicitation # SPE8E5-26-T-3897
This contract pertains to the procurement of a decal identified by NSN 7690-01-537-8140 and part number 13007914, with a requirement for 36 units to be delivered within 35 days of contract award. The item is classified as a critical application item with a Type I shelf life of 24 months, non-extendable, and must comply with specific packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The product must conform to designated drawing revisions dated August 27, 2013, and July 1, 2026, and packaging must align with DLA Packaging Requirements for Procurement, including palletization and unit container specifications. Delivery is FOB origin, inspection and acceptance occur at destination, and no variance in quantity is permitted. The item is subject to defense information controls and must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of September 22, 2026, and original delivery date of September 25, 2026. The unit price is $36.00 per unit, totaling $1,296.00, and the contract is issued under solicitation SPE8E5-26-T-3897 with a response deadline of August 17, 2026. Transportation guidelines are governed by DLA procedural notes C19 and C20, and the unit of issue is the individual unit (EA). The contracting office is the DLA Distribution New Cumberland Facility, with primary point of contact Amanda Bird, and the NAICS code is 325998. All packaging and marking must strictly adhere to prescribed military standards and DLA directives to ensure compliance and interoperability within defense logistics systems.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
DIBBS
DRY CHEMICAL, FIRE EXTI
Solicitation # SPE8E9-26-T-3384
The contract specifies the procurement of 116 units of 50-pound dry chemical fire extinguishers filled with potassium bicarbonate, compliant with federal specification for dry chemical fire fighting agents. Each unit is identified by NSN 4210-00-752-9343 and must be manufactured to the current revision of the applicable military or consensus standard, with historical versions accepted only for previously produced items. Strict packaging and marking standards are mandated per MIL-STD-2073-1E and MIL-STD-129, including preservation methods in accordance with ASTM D3951 and palletization following DLA Packaging Requirements. All items are subject to quality conformance inspections governed by RQ006 and CDRL requirements, with mandatory Certificate of Quality Compliance documentation. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero tolerance for non-conformances unless otherwise specified, and critical attributes are assigned the highest verification levels. Mercury and mercury-containing compounds are prohibited in contact with the extinguishers except in exempted applications like sensors or batteries, which must include secondary containment. The extinguishers are designated as a critical application item, requiring full compliance with the Technical Data Package and quality assurance provisions tied to specific revision numbers. Delivery is FOB origin with no quantity variance allowed, inspection and acceptance occurring at the destination, with shipment deadlines ranging from July to September 2026. Three separate delivery points across Washington, Florida, and California are specified, each with assigned parcel and freight addresses. The contract is set aside entirely for small businesses and includes compliance obligations under DLA’s Master List of Technical and Quality Requirements, with referenced documents controlling the technical baseline based on solicitation and award dates.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
DIBBS
BRUSH, PAINT
Solicitation # SPE8E7-26-T-3467
The contract calls for the procurement of 2,750 units of paint brushes conforming to Commercial Item Description A-A-3193, Type 2, Class 1, Size 7, identified by NSN 8020-00-559-0439. Delivery is required within 46 days of contract award, with an original delivery date of November 10, 2026, and a need ship date of October 3, 2026. All items must be delivered FOB origin, with inspection and acceptance occurring at the destination facility located at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. The unit price is $1.000 per unit, resulting in a total contract value of $2,750. Packaging must adhere to MIL-STD-2073-1E specifications, including preservation method 10, no cling/dry or cushioning materials, and unit container code 10. Marking and labeling must follow MIL-STD-129R(3), with no special marking required, and palletization must comply with DLA Packaging Requirements RP001. Bar-coding and hazard labeling, in accordance with 29 CFR 1910.1200, are mandatory where applicable, and all materials must be properly identified if they contain hazardous substances. The contract incorporates multiple Federal Acquisition Regulation and Defense FAR Supplement clauses governing quality assurance, inspection, cybersecurity, trafficking in persons, employment eligibility, sustainable procurement, and safeguarding of defense information, including the requirement to comply with NIST SP 800-171 with a specific deviation. Electronic invoicing is required through Wide Area WorkFlow, and offers must be submitted via DIBBS by August 17, 2026. The contracting officer’s representative contact is Kelly Mitchell, and compliance with socioeconomic program representations for small businesses is required, though no preference basis or evaluation weighting is specified. Contractors must also provide Unique Entity IDs and CAGE codes, and affirm compliance with restrictions on covered defense telecommunications equipment and prohibited substances such as hexavalent chromium. The contract is firm fixed price, with no options or modifications contemplated, and performance is subject to strict adherence to all referenced military standards and regulatory requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
DIBBS
SOLDER, PASTE
Solicitation # SPE8E9-26-T-3373
The contract pertains to the procurement of solder paste, identified by NSN 3439-01-415-2258, with a unit of issue in pounds and a required delivery within five days of order receipt. Two line items each specify one pound at a unit price of $499.00, for a base contract value of $998, with a permissible quantity variance of plus 10 percent and zero percent minus, allowing up to 1.1 pounds per line. The product must conform to specified military standards and is sourced exclusively from approved suppliers, with Aufhauser Corporation (CAGE 59401) and Turbo Braze Corporation (CAGE 1BJ08) recommended for approval. The solder paste is classified as a Type 2 item with a shelf life of six months, extendable under applicable conditions, and must comply with ASTM B32 specifications, recognizing that this is not an acceptable substitute for SN63PB37 or QPL-QQ-S-571. Compliance with DLA Packaging Requirements for Procurement and MIL-STD-2073-1E is mandatory for packaging, with preservation methods requiring cleaning and drying without additional preservation materials. Marking must adhere to MIL-STD-129, with no special marking required, and palletization must follow RP001 guidelines. The material is hazardous, necessitating adherence to IP025 for hazardous materials handling and DFARS 252.223-7001 for hazard warning labels. Delivery is FOB origin, with acceptance and inspection occurring at the destination location in Madison, Wisconsin. Shipping must be conducted via the fastest traceable means, explicitly excluding parcel post, and all commercial documentation must be submitted electronically through the Wide Area WorkFlow system. The contract incorporates numerous FAR and DFARS clauses governing equal employment opportunity, combating human trafficking, hazardous material handling, cybersecurity safeguards, and electronic payment, including specific provisions prohibiting hexavalent chromium and covered defense telecommunications equipment from Communist Chinese military companies. Offerors must provide accurate Unique Entity ID and CAGE codes and complete all required representations regarding small business status and socioeconomic certifications. The solicitation is open for responses via DIBBS until August 17, 2026, with award expected following evaluation against technical acceptability and price, though the specific selection methodology is not stated. The Army serves as the lead service for this item, and the contracting office is under the
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
DIBBS
DECAL
Solicitation # SPE8E6-26-T-4072
This contract pertains to the procurement of a single unit of a Type I shelf-life item identified by NSN 7690015956880 and part number 9720-925, with a mandatory non-extendable shelf life of 24 months as defined by RS001. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and no cushioning or dunnage, and marked in accordance with MIL-STD-129 with the special marking code 32 indicating Type I shelf-life status. Palletization must meet DLA’s Packaging Requirements and the delivery is FOB destination with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be delivered within five business days of contract award to the U.S. Naval Air Facility Atsugi in Japan, with an alternate parcel post address for U.S. military mail. The contract references applicable technical and quality standards from the DLA Master List and is governed by the revision in effect on the solicitation issue date. All transportation, freight handling, and shipment details adhere to DLAD Procurement Notes C19 and C20, and the supplier must ensure alignment with DLA’s authorized unit of issue and federal supply protocols. The contract was issued under solicitation SPE8E6-26-T-4072 by the Defense Logistics Agency, with a required delivery date of July 28, 2026, and a response deadline of August 17, 2026. The point of contact is Vincent Nader, and the place of performance is a military facility in FPO AP 96306-1204, though physical delivery occurs at the Japanese installation in Kanagawa Prefecture. The item is designated for government use only, and all marking, packaging, and logistical instructions must be followed precisely without deviation. The NAICS code 325998 applies to this unique defense-related supply item, and the supplier must comply with all federal procurement requirements for defense equipment, including handling of covered defense information as applicable.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E5-26-T-3879
The contract pertains to the procurement of Marker, Identification under NSN/Part Number 7690-01-212-6734, with a quantity of 3 PG, equivalent to 300 units, and a delivery requirement of 125 days after award. The solicitation number is SPE8E5-26-T-3879, issued on August 5, 2026, with responses due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized dissemination of associated technical data to foreign persons, including foreign nationals within the U.S., and requiring strict compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The place of performance is New Cumberland, PA, with Amanda Bird as the primary point of contact. The NAICS code is 325998, and the contracting entity is the Department of Defense, specifically the DDSP New Cumberland Facility.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
DIBBS
FLUX, SOLDERING
Solicitation # SPE8E9-26-T-3361
The contract is for FLUX, SOLDERING with NSN 3439-01-459-2000 and a quantity of 50 BT, issued under solicitation SPE8E9-26-T-3361 with a response deadline of August 17, 2026. The item is subject to DLA packaging requirements and incorporates technical and quality standards identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the controlling revision tied to the solicitation issue date or award date depending on acquisition size. Hazardous materials regulations apply, requiring a current Material Safety Data Sheet (MSDS) to be submitted via the DLA MSDS email mailbox at DLA.MSDS@DLA.MIL along with the required cover sheet P-75, and a physical copy of the MSDS must accompany each shipment. Packaging must conform to applicable regulations including 49 CFR and ICAO Technical Instructions. The place of performance is Tracy, California, with a delivery requirement of 127 days ADO. The contract is managed by the Department of Defense under the Construction & Equipment MRO SVC I office, with Matthew Kruc listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
DIBBS
LABEL
Solicitation # SPE8E6-26-T-4020
The contract pertains to a labeling requirement under solicitation SPE8E6-26-T-4020, with a focus on handling technical data subject to strict export controls under ITAR or EAR regulations. Any access to or disclosure of this data, even to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce, and compliance with DFARS 252.225-7048. Contractors must hold an approved US/Canada Joint Certification Program certification, complete mandatory training on proper handling of DOD export-controlled technical data, and successfully pass the DLA Export-Controlled Technical Data Questionnaire to be granted access. The item, identified by NSN 7690-01-359-7375, has a quantity of 496 units and is subject to an 89-day delivery timeline. The solicitation is issued by the Defense Logistics Agency’s New Cumberland Facility under the Department of Defense, with Vincent Nader listed as the primary point of contact. The North American Industry Classification System code is 325998, and responses are due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
PUMPING UNIT, SEWAGE
Solicitation # SPE8E8-26-T-5044
The contract is for a single sewage pumping unit with NSN 4630-01-729-9276 and part number WHR7-23, supplied by either Myers F E Co Sub of Pentair Corp or King Pumps Inc, under solicitation SPE8E8-26-T-5044. Delivery is required within 167 days from the contract award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance to occur at the destination. The item must be packaged in strict compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling, and RP001 for palletization standards. Packaging must follow the specified Unit of Issue and Quantity per Unit Pack as defined in the contract, with all materials properly labeled and prepared for shipment to the designated DLA Distribution facility in New Cumberland, PA. The required delivery date was originally January 10, 2027, with a need ship date of February 1, 2027, and the contract falls under the federal procurement system with a NAICS code of 325998. The contract mandates full compliance with DLA’s technical, quality, and documentation standards, including the removal of government identification from rejected items and submission of source approval documentation as required by RC001. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the unit of issue is defined per the official DoD and ANSI X12 standards referenced in the contract. All supply data, delivery instructions, and packaging directives are binding, with the DLA Distribution Center in New Cumberland serving as the sole recipient. The contract was posted on August 5, 2026, with responses due by August 17, 2026, and points of contact are listed for procurement inquiries under the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
CLEANING STICK, CONNECT
Solicitation # SPE7M1-26-U-5051
This contract is for the procurement of cleaning sticks with connectors for fiber optic applications, identified by the NSN 6070-01-553-2263 and purchase request 1000238964, with an estimated quantity of 314 packaging groups, each containing 50 units. The contract is issued under solicitation SPE7M1-26-U-5051 as a Women-Owned Small Business Set-Aside, with delivery required within 68 days FOB origin and no variance allowed in quantity. Acceptance and inspection occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, including palletization per DLA packaging requirements. The item is classified as a commercial item and must not contain mercury or mercury-containing compounds except in specific exempted applications such as functional batteries, lamps, sensors, or weapons systems as defined by NAVSEA, with additional containment requirements for portable devices. Approved suppliers include INSITU INC, KITCO FIBER OPTICS INC, BAE SYSTEMS MARINE LIMITED, FN HERSTAL S.A., SCIENTIFIC MANAGEMENT ASSOCIATES, MICROCARE LLC, and LEONARDO UK LTD, each with their designated part numbers. The contract is managed by the Department of Defense’s Maritime Supply Chain under the DLA Direct CONUS coverage, with Bryan Fair as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and Compliance for Defense SupplyThe contract requires the provision of compliant hazard warning labels and Safety Data Sheets for hazardous materials shipped to DLA Distribution San Joaquin in Tracy, California, with strict adherence to OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and MIL-STD-129 marking specifications. All labels must accurately convey chemical hazards, precautionary statements, and product identification, while the accompanying SDS must follow the Globally Harmonized System format and be current, complete, and accessible to end users. The materials must be properly marked and documented to ensure regulatory compliance and operational safety throughout the defense supply chain. This subcontract, classified under NAICS code 541690, is issued by the Department of Defense through DLA Distribution San Joaquin and is open for responses until August 17, 2026. The place of performance is specified as Tracy, CA, with a ZIP code of 95304-5000. The solicitation is posted on the DIBBS platform under reference number SPE8E826T4992, and vendors must ensure their proposed solutions meet federal defense logistics requirements for hazard communication and material handling. Failure to comply with labeling or SDS standards may result in rejection of shipments and potential contract penalties.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541511
New
DIBBS
Electronic Invoicing and WAWF Submission ServicesThe contract requires the preparation and timely submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in full compliance with DFARS 252.232-7003, covering both fixed-price and cost-type contract line items. This obligation ensures accurate, secure, and standardized digital documentation aligned with Department of Defense financial and procurement standards. The work is to be performed in Tracy, California, with a zip code of 95304-5000, and falls under a Total Small Business Set-Aside as defined by FAR 19.5, reserving the opportunity exclusively for small businesses certified by the SBA. The NAICS code 541511 indicates this is an information technology services contract, specifically focused on custom computer programming services related to invoice and reporting automation. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is classified as a subcontract under the DLA San Joaquin office, part of the Department of Defense procurement network.
Custom Computer Programming Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Specialty Item Supply: Controller, Special (NSN 4510251497100)The contract awards the supply of 28 units of CONTROLLER, SPECIAL with NSN 4510251497100 at a unit price of $28.00, requiring full compliance with packaging, labeling, and delivery specifications to Tracy, CA, with a zip code of 95304-5000. The procurement is structured as a subcontract under a Total Small Business Set-Aside, as defined by FAR 19.5, ensuring only small business concerns are eligible to respond. The North American Industry Classification System code is 334511, indicating the industry category tied to the manufacturing of navigational, Measuring, Electromedical, and Control Instruments. The solicitation was posted on August 5, 2026, with all responses due by August 17, 2026, and the awarding agency is DLA DIST SAN JOAQUIN under the Department of Defense, with performance obligations centered exclusively in Tracy, California.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171) Assessment and ImplementationThe contract requires the implementation of NIST SP 800-171 cybersecurity controls to safeguard Controlled Unclassified Information within the covered systems. The contractor must complete a comprehensive self-assessment of compliance with all 110 security requirements outlined in the standard, document findings, and submit the resulting scorecard to the Supplier Performance Risk System. The effort also includes ongoing support for the protection of CUI through technical and procedural measures, ensuring alignment with federal guidelines, as well as readiness to report any cyber incidents in accordance with applicable DoD protocols. The work is scoped under a Total Small Business Set-Aside, meaning only small businesses registered with the SBA are eligible to bid, and the performance location is designated as Tracy, California with a zip code of 95304-5000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, under the NAICS code 541512 for Computer Systems Design Services.
Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Military Packaging and Preservation ServicesThis contract requires the provision of military-compliant packaging, preservation, and marking services for defense-related materiel, strictly adhering to DLA standards and MIL-STD-129 requirements. The work involves the application of VCI corrosion inhibitors, desiccants, hermetic sealing techniques, and barcoding systems to ensure long-term protection, traceability, and compliance with federal military specifications. All packaging processes must be executed in a manner that guarantees the integrity of equipment and supplies during storage and transport under demanding operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 332999 indicating it falls under Other Miscellaneous Manufacturing. Performance will take place at a designated location in Tracy, California, with a zip code of 95304-5000. Proposals must be submitted by the deadline of August 17, 2026, following the release date of August 5, 2026, and will be managed by the DLA San Joaquin office under the Department of Defense. Interested parties must access the solicitation through the official DIBBS portal to ensure full compliance with submission protocols.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThis contract requires the provision of comprehensive hazard communication labeling services for hazardous materials, ensuring full compliance with OSHA and MIL-STD-129 standards. The scope includes the preparation and submission of pre-award documentation, as well as detailed analysis of regulatory exceptions to support legal and operational adherence. All labeling must meet federal requirements for workplace safety and military logistics, with an emphasis on accuracy, clarity, and traceability throughout the supply chain. The work is to be performed at Tracy, California, with a 95304-5000 zip code designation, and the contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid. The NAICS code 541690 indicates this falls under other scientific and technical consulting services, specifically aligning with regulatory compliance and safety consulting activities. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting office affiliated with the Department of Defense through DLA Dist San Joaquin.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Mechanical Component Manufacturing for Manual Control LeverThe contract calls for the manufacture of a precision manual control lever with NSN 5340003440745, a defense-grade mechanical component essential for industrial or military systems. Production must utilize casting or forging processes and require specialized tooling to meet exacting military standards, ensuring reliability and durability under demanding operational conditions. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to compete, and the NAICS code 332999 applies to other fabricated metal product manufacturing. Performance is required at Tracy, California, with a ZIP code of 95304-5000, and all deliverables must comply with defense-related specifications without exception. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, leaving a twelve-day window for qualified small businesses to submit proposals. The contracting entity is DLA Dist San Joaquin under the Department of Defense, and the contract is structured as a subcontract, indicating it supports a larger procurement effort. While no point of contact details are provided, the official solicitation can be accessed via the DIBBS portal using the provided link. All participants must ensure adherence to quality, timing, and regulatory requirements for defense production, with no allowances for non-compliance or deviations from the specified manufacturing methods.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: NA
New
DIBBS
Unable to Identify Subcontract OpportunitiesNo subcontract opportunities can be identified due to an inability to retrieve prime contract details, as system timeouts have prevented access to essential information such as scope, CLINs, agency specifics, and other metadata required for decomposition. The solicitation, posted on August 5, 2026, with a response deadline of August 17, 2026, is categorized as a subcontract under the DLA DIST SAN JOAQUIN agency within the Department of Defense, but no NAICS code, set-aside type, or point of contact is provided. The place of performance is listed as Tracy, California, with a zip code of 95304-5000, though the city, state, and country fields for the office address remain undefined. The contract’s full details are only accessible via the DIBBS system link, but attempts to extract actionable subcontract data have been thwarted by technical limitations.

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the provision of OSHA-compliant hazard communication materials for all hazardous substances contained in delivered items, specifically including Globally Harmonized System labels and Safety Data Sheets that meet federal regulatory standards. These materials must be accurately generated, formatted, and delivered in alignment with OSHA’s Hazard Communication Standard to ensure worker safety and regulatory adherence throughout the supply chain. The work is scoped to support items delivered to the specified place of performance in Tracy, California, with the ZIP code 95304-5000, and must be completed in accordance with all applicable federal safety and documentation protocols. This is a subcontract issued under NAICS code 541690 by the Department of Defense through DLA Dist San Joaquin, with a response deadline of August 17, 2026. The solicitation was posted on August 5, 2026, and all submissions must be received by the stated deadline to be considered. While no specific set-aside designation is provided, the contract is explicitly structured as a subcontract, implying it is part of a larger procurement effort. Contractors must be fully versed in GHS labeling requirements and SDS formatting to meet compliance obligations without delay or error, ensuring seamless integration into the recipient’s hazardous materials management system.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
Condensing Unit Supply (HVAC Equipment)The contract entails the supply of six commercial off-the-shelf condensing units identified by NSN 4130016572911, intended for use in refrigeration and cooling systems. These units must fully comply with military packaging and marking standards to ensure compatibility with defense logistics and handling protocols. The procurement is classified as a subcontract under the NAICS code 333414, which corresponds to HVAC equipment manufacturing. The offering is managed by DLA Dist San Joaquin under the Department of Defense, with the place of performance located in Tracy, California, at ZIP code 95304-5000. Solicitation for this contract was posted on August 5, 2026, and responses are due by August 17, 2026. All deliveries must meet the specified technical and logistical requirements, including adherence to military specifications for packaging and labeling, to support seamless integration into defense supply chains. The contract is not subject to any set-aside classifications and is accessible through the DIBBS platform for potential vendors seeking to respond.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Defense Logistics Shipment & Labeling ServicesThe contract requires the packaging, marking, and shipment of safety belts in strict accordance with MIL-STD-129 standards and the Defense Logistics Agency’s Vendor Shipment Module requirements. All items must be properly labeled, documented, and prepared for military logistics distribution, ensuring full compliance with federal defense shipment protocols. The work is to be performed at a designated location in Tracy, California, with the zip code 95304-5000 serving as the place of performance. This is a subcontract opportunity under the NAICS code 493190, which categorizes it under other warehousing and storage services, and is managed by the DLA Dist San Joaquin office under the Department of Defense. Bidders must submit responses by the deadline of August 17, 2026, with the solicitation posted on August 5, 2026. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors regardless of size or certification status. Participation requires familiarity with DLA’s electronic vendor systems and adherence to stringent military packaging and identification guidelines. The contract is accessible via the DIBBS portal using the reference number SPE8E626T4031, and successful performers will support the defense supply chain by ensuring timely and accurate delivery of critical safety equipment to military endpoints.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling SupportThe contract requires the preparation of Safety Data Sheets and hazard warning labels for hazardous materials used in the manufacturing or packaging of safety belts, ensuring full compliance with OSHA and Department of Defense regulations. All deliverables must meet federal standards for hazard communication, accuracy, and readability, with strict adherence to mandated content, format, and language requirements. The work is tied to operations in Tracy, California, with the place of performance specified at ZIP code 95304-5000, and the solicitation is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting activity managed by DLA Dist San Joaquin under the Department of Defense. While no set-aside type or specific point of contact is indicated, contractors must be prepared to demonstrate capability in handling classified or sensitive defense-related materials and producing compliant documentation under tight deadlines. All submissions must align with the DIBBS system referenced in the UI link, and successful offerors will be expected to support ongoing defense manufacturing efforts with reliable, audit-ready safety documentation.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details