Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Firestopping and Joint Sealants

Active

Federal

Response Deadline10/24/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity involves the installation of penetration firestopping and joint sealants for prime contractors working on facility projects at the SLAC National Accelerator Laboratory under the Department of Energy. The scope of work requires sealing pipe penetrations in fire-rated walls and floors using non-combustible, smoke-tight materials, as well as the installation of interior joint sealants. All work must strictly adhere to SCAQMD 1113 VOC restrictions to ensure environmental compliance and result in certified fire-rated penetrations and sealed joints. The project is categorized under NAICS code 238390 and will be performed in the 94025 zip code area. Interested parties should note that the solicitation was posted on October 9, 2026, with a response deadline set for October 24, 2026.

General Info

Firestopping and joint sealant installation for SLAC National Accelerator Laboratory facility projects.

Agency

Department Of Energy → Slac National Accel Labor -Doe Contractor

NAICS

238390 - Other Building Finishing Contractors

Place of Performance

CA, 94025, USA

Set-Aside

NONE

Documents

This scope was carved out of SLAC_DRAFT_RFP_369005_CRMF_Cleanroom_Construction.

The full solicitation package (31 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CRMF SRF Cleanroom and UPW Construction Sources Sought Notification

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 9

subcontract

Response DeadlineOct 24

Submission deadline

Response Deadline

10/24/2026, 12:00:00 AM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs penetration firestopping and joint sealants for prime contractors on SLAC National Accelerator Laboratory facility projects. Seals pipe penetrations in fire-rated walls and floors using non-combustible smoke-tight materials and installs interior joint sealants. Must comply with SCAQMD 1113 VOC restrictions. Delivers certified fire-rated penetrations and sealed joints.

Similar Contracts

Same NAICS industry code

Toilet and Bath AccessoriesThis subcontract agreement involves the supply and installation of toilet and bath accessories for prime contractors working on the Abby Feeding Futures project in Abbotsford, British Columbia. The scope of work includes the precise installation of accessories using templates and the coordination of necessary cutouts and recess framing to ensure proper fit and functionality. The project mandates the use of high-quality materials, specifically ASTM A653 sheet steel, ASTM A666-03 stainless steel, and AISI type 304 tubing, all secured with hot-dip galvanized fasteners. Managed under School District 34 Abbotsford for the Province of British Columbia, the contract requires the final delivery of fully installed bathroom and toilet accessories by the specified project deadlines.

School District 34 Abbotsford

POSTED

DEADLINE

Dimensional Letter SignageThis subcontract opportunity involves the supply and installation of exterior building signage for prime contractors working on projects for the Utah Division of Facilities Construction and Management. The scope of work specifically requires the removal of existing exterior dimensional letters and the installation of new dimensional letter signage in accordance with Spec Section 10 14 19 to provide complete exterior building identification. The project is categorized under NAICS code 238390. Interested parties must submit their responses by the deadline of November 12, 2026. Further details and application processes are managed through the Utah Bonfire hub.

POSTED

DEADLINE

Joint Sealant & Caulking SpecialistThis subcontract opportunity is for a Joint Sealant and Caulking Specialist to provide interior and exterior sealing services for prime contractors working on Collin College facility projects. The scope of work includes applying sealants to glazing systems, gypsum board assemblies, masonry control and expansion joints, moving joints, and site concrete paving expansion joints to ensure weather-tight penetrations. All work must be performed in strict compliance with ASTM standards C717, C793, C794, C834, C920, and C1193. Interested parties must submit their responses by the deadline of November 13, 2026.

POSTED

DEADLINE

J065--RFQ - INSTALL LEAD BASED LINERS - 544 Columbia SC, 29209

Solicitation # 36C24727Q0036_0001

Solicitation 36C24727Q0036 is a request for a one-time service to supply and install lead-based liners in the Dental Clinic at the WJB Dorn VA Medical Center in Columbia, South Carolina. This procurement is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The contractor is responsible for furnishing all labor, travel, equipment, and materials to install 1/16 inch lead-lined boards on a wall area of approximately 101 to 252 square feet, reaching a maximum height of 7 feet. The scope of work requires a Level 4 drywall finish per ASTM C840 and adherence to ASTM C1396/C1396M specifications for the liners. While the contractor must ensure seams and penetrations are shielded and follow OSHA guidelines, the VA is responsible for demolition, ICRA requirements, painting, and final radiation shielding testing. The period of performance shall not exceed three months from the date of award, with work tentatively scheduled from 6:00 p.m. to midnight, Sunday through Friday, excluding federal holidays. Award will be based on the Lowest Price Technically Acceptable (LPTA) basis, evaluating technical capability and total evaluated price. Offerors must provide a detailed technical approach, proof of OSHA and EPA compliance, and necessary licenses for handling lead-based materials. Invoicing is to be submitted electronically via the Tungsten Network after completion and inspection approval. Contractor personnel are required to check in and out at the Engineering Control Center and must maintain a secure worksite, removing all debris daily.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Commercial Carpentry and MillworkThis commercial carpentry and millwork subcontract involves performing wall reconfigurations and millwork installations for prime contractors on facility projects at the University of California, Santa Barbara. The scope of work includes framing new walls for restroom expansions and constructing the merchandise and service areas within the lobby, ultimately delivering finished walls, partitions, and service counters. The project is located in Santa Barbara, California, under NAICS code 238390. Interested parties must note the response deadline of October 21, 2026, following the posting date of October 16, 2026.

University of California, Santa Barbara

POSTED

DEADLINE

Casework Installation ContractorThis subcontract agreement appoints a Casework Installation Contractor to perform cabinetry installation for prime contractors at Woodland Elementary under the Breitung Township Schools in Michigan. The scope of work involves the installation of pre-fabricated cabinetry units across seven classrooms, requiring the contractor to secure units to walls and floors according to design specifications and ensure the precise alignment of Formica 851-58 surfaces. To qualify for the project, the contractor must hold a valid Michigan state license and maintain insurance coverage of 1 million dollars aggregate and per person. The solicitation was posted on October 16, 2026, with a response deadline set for October 30, 2026.

Breitung Township Schools

POSTED

DEADLINE

Acoustic & Theater Equipment InstallationThis subcontract opportunity involves the installation of specialized acoustic and theater equipment for prime contractors working on Grand Rapids Public Schools facility projects. The scope of work focuses on delivering a fully functional, acoustically treated auditorium space through the installation of fixed auditorium seating, motorized rigging, stage curtains, and acoustic ceiling and wall treatments utilizing fabric panels and acoustic foam. The project is categorized under NAICS code 238390 and is associated with the state of Michigan. Interested parties should note that the solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026, at 3:00 PM.

Grand Rapids Public Schools

POSTED

DEADLINE

Cabinetry Installation ServicesThis subcontract for Cabinetry Installation Services involves the installation of fabricated cabinetry and casework for prime contractors at Woodland Elementary school projects in Michigan. The selected provider is responsible for performing all field measurement verifications prior to construction and ensuring that all units are installed in strict accordance with provided designs, sections, and details. To be eligible, the contractor must hold a valid Michigan state business license and maintain appropriate insurance coverage. All cabinetry systems must be fully installed and secured by the completion deadline of August 13, 2027. This opportunity was posted by Breitung Township Schools with a response deadline of October 30, 2026.

Breitung Township Schools

POSTED

DEADLINE

Base Trim InstallationThis subcontract opportunity with Pellston Public Schools in Michigan involves the installation of new base trim for prime contractors on facility projects. The scope of work includes the removal of existing trim and the installation of new rubber, vinyl, or wood base trim along walls in locker areas, utilizing adhesives or fasteners in accordance with commercial finishing specifications. The project is categorized under NAICS code 238390 and will be performed in Pellston. Interested parties must note the tight response window, with the solicitation posted on October 16, 2026, and the response deadline set for October 20, 2026.

Pellston Public Schools

POSTED

DEADLINE

Waterproofing Application SpecialistThe Waterproofing Application Specialist subcontract involves providing high-performance waterproofing services for the City of La Mesa police department facility projects. The selected contractor will be responsible for priming and top-coating existing walls and decks using Neogard coating or an approved equivalent, applying Deco 30 Clear Sealant to cast-in-place return walls, and coating all recesses and scupper locations to ensure a fully sealed garage deck. All work must be performed in strict accordance with the 2025 California Building Code and CARB Sections 2449(i) and 2449(j). This opportunity is managed through the Engineering Department of the City of La Mesa, with a response deadline set for October 30, 2026.

Engineering Department of City of La Mesa

POSTED

DEADLINE

Joint SealantsThis subcontract opportunity is for the application of joint sealants on facility projects at Johnson County Community College in Kansas. The selected contractor will work under prime contractors to perform specialized caulking and sealing of joints and seams, with a specific focus on ensuring moisture protection within restroom environments. The solicitation was posted on October 15, 2026, and requires responses to be submitted by the deadline of November 3, 2026. This project falls under NAICS code 238390, focusing on the delivery of professionally sealed joints to maintain the integrity of the college's facilities.

Johnson County Community College

POSTED

DEADLINE

Custom Reception Desk Cabinetry Fabrication and InstallationThis subcontract agreement covers the fabrication, delivery, and installation of a custom reception desk for museum projects at Johnson County Community College. The selected contractor is responsible for the entire lifecycle of the project, including initial field verification, the preparation of detailed shop drawings, and the fabrication of the structural body and cabinetry with uniform finished surfaces. The scope of work concludes with the final positioning, leveling, and touch-up of the unit to ensure a fully completed installation. The project requires strict adherence to museum protection standards to ensure the safety of the surrounding environment. Interested parties must submit their responses by November 3, 2026, in accordance with the solicitation posted on October 15, 2026. The work falls under NAICS code 238390 and is managed through the college's procurement system.

Johnson County Community College

POSTED

DEADLINE

More opportunities from Department Of Energy → Slac National Accel Labor -Doe Contractor

Same awarding agency

Solicitation # SLAC_368560_Fabrication

SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for the fabrication of various Ultra-High Vacuum components under solicitation SLAC_368560_Fabrication. The required items include a variety of bases, tubes, plates, mounts, and retainers, with specific quantities ranging from single units to 76 pieces. Source selection will be conducted using the Lowest Price and Technically Acceptable method, with a submission deadline of October 20, 2026. The resulting purchase order will be a fixed-price contract with NET-30 payment terms and FOB Destination Prepaid and Add freight terms. Technical requirements are stringent due to the UHV nature of the components. Prohibited processes include EDM machining without prior approval, the use of sanding discs, grinding wheels, abrasives, sulfur-containing cutting fluids, and silicone lubricants. Specific parts require electropolishing, and dimensional inspection reports must be provided. Offerors must be registered in the System for Award Management and submit a completed Representations and Certifications Rider. Additionally, the Buy American Act applies to any items with a unit price exceeding 15,000 dollars.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Vacuum Window Mount and High-Pressure Tubing SupplyThis subcontract involves the supply of vacuum-compatible interfaces for prime contractors supporting laser projects at the SLAC National Accelerator Laboratory under the Department of Energy. The scope of work includes the delivery of a vacuum window mount and stainless steel tubing assembly, both of which must be engineered to withstand a nominal maximum working pressure of at least 2.5 bar absolute. Additionally, the contract covers the provision of high-pressure upgrade components. The project is categorized under NAICS code 332710 and will be performed in Menlo Park, California. The solicitation was posted on October 14, 2026, with a response deadline set for October 22, 2026.

POSTED

DEADLINE

Precision Fiber Holder and Optical Adjustment Kit FabricationThis subcontract involves the fabrication of precision optomechanical components for prime contractors supporting laser projects at the SLAC National Accelerator Laboratory under the Department of Energy. The scope of work requires the machining of a main fiber holder kit and an optical axis height adjustment kit, both of which are critical for maintaining strict laser alignment. A key technical requirement is that the final assembly footprint must maintain a short dimension of less than 0.2 meters. The project is categorized under NAICS code 333241 and will be performed in Menlo Park, California. The contract was posted on October 14, 2026, with a response deadline of October 22, 2026. The primary deliverable consists of the completed holder and adjustment kits designed to meet the laboratory's precise specifications.

Food Product Machinery Manufacturing

POSTED

DEADLINE

High Power Hollow Core Fiber and Ceramic Taper SupplyThis subcontract involves the supply of high-power mounted hollow core fiber for prime contractors working on laser pulse compression projects at the SLAC National Accelerator Laboratory. The manufacturer is responsible for delivering a mounted fiber assembly compatible with a 1030 nm wavelength, 70 W average power at 40 kHz, and 1.75 mJ input pulse energy, which must include a conical ceramic protection taper. Additionally, the provider is required to submit feasibility data demonstrating the ability to achieve an output pulse duration of less than 10 fs. Managed by the Department of Energy through the SLAC National Accelerator Laboratory, the performance of this contract will take place in Menlo Park, California. The opportunity was posted on October 14, 2026, with a response deadline of October 22, 2026, falling under NAICS code 325211.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

High power hollow core fiber assembly for laser pulse compression

Solicitation # Req-369233

SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is seeking a U.S. domestic source for a high power hollow core fiber assembly designed for second stage laser pulse compression. The required equipment includes a main fiber holder kit, stainless steel tubing, a vacuum window mount, a high power mounted fiber with a conical ceramic protection taper, an optical axis height adjustment kit, and a high pressure upgrade. The assembly must be compatible with a laser wavelength of 1030 nm, an input pulse energy of 1.75 mJ, and an average power of 70 W at a 40 kHz repetition rate, with a target output pulse duration below 10 fs. Technical specifications require the assembly to withstand a nominal maximum working pressure of at least 2.5 bar absolute and maintain a footprint with a short dimension of less than 0.2 meters. The award will be determined using the Lowest Price Technically Acceptable method, with a strong emphasis on the best lead time, as the complete assembly must ship within three months of the purchase order. Eligible offerors must be registered in the System for Award Management and provide documented evidence of feasibility regarding the target pulse duration. Payment terms are Net 30 days, and freight is FOB Destination Prepaid and Add for domestic suppliers. The procurement is governed by SLAC's Terms and Conditions for Fixed Price Commercial Supplies and Services and incorporates specific federal requirements, including the Buy American Act and various FAR clauses regarding computer software licenses and international transportation.

Fiber Optic Cable Manufacturing

POSTED

DEADLINE

Plumbing and Process PipingThis subcontract for Plumbing and Process Piping involves the installation of domestic water, sanitary sewers, and process piping for prime contractors at the SLAC National Accelerator Laboratory. The scope of work specifically includes the installation of domestic water piping, sanitary waste piping, and Ultra-Pure Water systems to ensure fully operational plumbing and UPW infrastructure. All drinking water components must strictly comply with NSF 61 and NSF 372 standards. The project is managed under the Department of Energy via the SLAC National Accelerator Laboratory, with performance taking place in the 94025 zip code area. Responses for this opportunity are due by October 24, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Fire Suppression SpecialistThis subcontract opportunity is for a Fire Suppression Specialist to support prime contractors on facility projects at the SLAC National Accelerator Laboratory under the Department of Energy. The selected contractor will be responsible for the installation of wet-pipe sprinkler systems and all necessary support infrastructure, including the placement of sleeves, valves, hangers, and seismic controls to ensure a fully operational fire suppression system. The project falls under NAICS code 238220 and is located in the 94025 zip code area. Interested parties must submit their responses by the deadline of October 24, 2026, following the posting date of October 9, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Cleanroom Systems SpecialistThis subcontract opportunity is for a Cleanroom Systems Specialist to support prime contractors on facility projects at the SLAC National Accelerator Laboratory for the Department of Energy. The selected provider will be responsible for the fabrication and installation of an ISO4 cleanroom envelope, which includes the installation of cleanroom wall panels, ceiling systems, and pass-through chambers. The primary objective is to deliver a fully enclosed cleanroom shell that strictly adheres to ISO4 classification standards. The project is categorized under NAICS code 238990 and will be performed in the 94025 zip code area. Interested parties should note that the solicitation was posted on October 9, 2026, with a response deadline set for October 24, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Interior Finishes and PaintingThis subcontract for Interior Finishes and Painting supports facility projects at the SLAC National Accelerator Laboratory under the Department of Energy. The scope of work involves providing comprehensive interior finishing services for prime contractors, including the installation of non-structural metal framing, gypsum board, resilient base, resinous flooring, and access flooring. Additionally, the contractor is responsible for applying interior and exterior painting as well as high-performance steel coatings, ensuring all materials comply with VOC restrictions to deliver fully painted and floored interior spaces. The opportunity is categorized under NAICS code 238320 and is located in zip code 94025. Interested parties should note that the solicitation was posted on October 9, 2026, with a response deadline set for October 24, 2026.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Doors, Frames and GlazingThis subcontract opportunity involves the supply and installation of aluminum frames, automatic entrances, and glazing for facility projects at the SLAC National Accelerator Laboratory. The scope of work requires the delivery and full installation of interior glass partitions, sliding automatic entrance systems, and various interior glazing systems, serving as a subcontractor to prime contractors. The project is managed under the Department of Energy through the SLAC National Accelerator Laboratory, with performance taking place in the 94025 zip code area. Interested parties should note the response deadline of October 24, 2026, and the associated NAICS code 238150 for these specialized installation services.

Glass and Glazing Contractors

POSTED

DEADLINE

Rough Carpentry and WoodworkThis subcontract for Rough Carpentry and Woodwork involves providing miscellaneous rough carpentry and blocking services for prime contractors on facility projects at the SLAC National Accelerator Laboratory. The scope of work includes the installation of nailers, utility shelving, plywood backing panels, and blocking to support subsequent trade installations. All materials must adhere to specified lumber grades and utilize fire-treated plywood in accordance with DOC PS 1 standards. The opportunity is managed by the Department of Energy through the SLAC National Accelerator Laboratory, with performance taking place in the 94025 zip code area. Interested parties should note that the response deadline is October 24, 2026, and the work falls under NAICS code 238130.

Framing Contractors

POSTED

DEADLINE

Structural and Miscellaneous MetalsThis subcontract for Structural and Miscellaneous Metals involves the fabrication and installation of structural steel and architectural metalwork for facility projects at the SLAC National Accelerator Laboratory. The scope of work includes the installation of structural steel framing, metal decking, cold-formed framing, ladders, pipe railings, and safety gates. To ensure quality and safety standards, the contractor must hold AWS D1.1, D1.2, and D1.6 welding certifications for steel, aluminum, and stainless steel. Managed under the Department of Energy, the project is located in zip code 94025. Interested parties must submit their responses by the deadline of October 24, 2026. The primary deliverable for this engagement is the complete installation of steel framing and safety systems for prime contractors.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS