FIRST AID KIT, AIRPL

The contract specifies the procurement of 82 FAA-certified lightweight first aid kits designed for aircraft use, constructed from flame-retardant ABS material with a hard container measuring 10 inches long by 10 inches wide by 2.625 inches high and weighing 3.38 pounds. Each kit features a double closure latch system to ensure a secure seal, a stainless steel carrying handle, and a green aircraft cross symbol on the cover. The contents include standardized medical items such as adhesive bandages, antiseptic swabs, ammonia inhalants, a triangular bandage with safety pins, wire splints, bandage scissors, roller and compress bandages, adhesive tape, surgical gloves, and a storage container, all identified by specific part numbers. The kits must have a 30-month shelf life with no more than four months elapsed between manufacturing and government delivery, and are classified as a Commercial Off-the-Shelf (COTS) item regulated by the FDA and subject to FAA airworthiness approval. The contract mandates compliance with rigorous quality assurance protocols, including sampling per MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise stated, and assigns verification levels or AQLs based on attribute criticality. Items must be preserved, packaged, and marked in accordance with MIL-STD-2073-1E and Medical Marking Standard No. 1, superseding MIL-STD-129, with special shelf-life marking code 32. Wood packaging materials must be heat-treated per DOD requirements, and all units must be shipped in commercial containers ensuring safe delivery at the lowest cost to Tinker AFB, Oklahoma. The contract is firm fixed price with no flexibility in quantity variance, and delivery is required within 30 days after order. The kits are designated as a critical application item, and the supplier must provide confirmed source and part number information. All applicable technical and quality requirements are incorporated via the DLA Master List, and compliance with FAA bare item marking and packaging standards is mandatory.