Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article and Production Lot Testing (PLT)

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the DLA Weapons Support Land Supply Chain involves performing destructive and non-destructive testing for prime contractors to validate quality conformance for Navy Critical Safety Items. The scope of work includes conducting First Article Testing on initial units and ongoing Production Lot Testing, with the delivery of corresponding certification reports and the coordination of sample delivery to Dayton T. Brown. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the technical data handled during these processes, the contractor is required to maintain CMMC Level 2 compliance. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

General Info

Subcontract for Navy Critical Safety Items testing in New Cumberland requiring CMMC Level 2.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-2710.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BRACKET, DOUBLE ANGLE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs destructive and non-destructive testing for prime contractors on DLA Weapons Support Land Supply Chain projects. Conducts First Article Testing (FAT) on initial units and ongoing Production Lot Testing (PLT) to validate quality conformance for Navy Critical Safety Items. Coordinates sample delivery to Dayton T. Brown. Requires CMMC Level 2 for technical data handling. Delivers FAT and PLT certification reports.

Similar Contracts

Same NAICS industry code

Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.

California Department of General Services

POSTED

about 4 hours ago

DEADLINE

Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.

California Department of General Services

POSTED

about 4 hours ago

DEADLINE

Structural Steel, Bolting, and Welding InspectionThis subcontract opportunity, managed by the California Department of General Services, involves providing specialized visual and technical inspections for structural steel, welding, and high-strength bolting on CALFIRE facility projects located in San Diego. The selected contractor will be responsible for utilizing welding gauges and torque wrenches to ensure structural integrity, ultimately delivering detailed welding inspection reports and bolting torque logs to the prime contractor. To qualify for this engagement, personnel must hold both AWS Certified Welding Inspector and ICC Structural Steel and Welding Inspector certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 24, 2026.

California Department of General Services

POSTED

about 4 hours ago

DEADLINE

Concrete and Reinforcing Steel Special InspectionThis subcontract for Concrete and Reinforcing Steel Special Inspection involves providing specialized inspection and testing services for prime contractors on CALFIRE facility projects in San Diego. The scope of work includes inspecting reinforcing steel placement and performing concrete sampling and testing for structures such as barracks, apparatus bays, and generator buildings. Required deliverables include concrete strength reports and reinforcing steel inspection checklists, utilizing tools such as concrete cylinders, slump cones, and compression testing machines. Qualified providers must hold ICC Reinforced Concrete Special Inspector and ACI certifications to ensure compliance with project standards. This opportunity is managed through the California Department of General Services under NAICS code 541380. The response deadline for this solicitation is November 24, 2026.

California Department of General Services

POSTED

about 4 hours ago

DEADLINE

Soils Inspection and Density TestingThis subcontract, managed by the California Department of General Services, involves providing specialized soils inspection and density testing for a CALFIRE facility project, specifically a fire station replacement in Potrero, California. The selected contractor will perform both field and laboratory testing of soils to support prime contractors during critical phases of construction, including clearing, grading, and foundation preparation. All work must be conducted in accordance with ASTM D 3740 standards, utilizing nuclear gauges and laboratory soil testing apparatus to ensure structural integrity. The contractor is responsible for delivering detailed soil density test reports and comprehensive inspection logs. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 24, 2026. While the project is located in Potrero, the place of performance is listed within San Diego.

California Department of General Services

POSTED

about 4 hours ago

DEADLINE

Environmental Analytical Testing ServicesThis subcontract for Environmental Analytical Testing Services supports prime contractors working on research and enforcement projects for the California Department of Fish & Wildlife. The scope of work involves performing specialized analytical testing on water and waste samples, specifically focusing on nutrient analysis, turbidity, BOD, COD, and low-level cleanups for pesticides, PAHs, and SVOCs. All work must be performed in accordance with EPA and SW-846 standards, and the provider is required to maintain ELAP certification to deliver Level II and Level IV analytical reports. The project is categorized under NAICS code 541380 and is designated for performance in Amador. Interested parties should note that the response deadline is November 17, 2026. This opportunity is managed through the Cal eProcure system for the state of California.

California Department of Fish & Wildlife

POSTED

about 4 hours ago

DEADLINE

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

First Article Testing and Material Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 9 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 9 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Supply of Bumper (NSN 5340-01-691-2548)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture or sourcing of bumper components identified by NSN 5340-01-691-2548. The selected provider will supply these components to prime contractors, ensuring all items meet strict technical specifications and are delivered FOB Origin. Compliance with military standards is mandatory, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510, with performance located in New Cumberland. To be eligible, contractors must maintain US/Canada Joint Certification Program certification and adhere to rigorous cybersecurity standards, including NIST SP 800-171 and CMMC Level 2 compliance. Responses are due by November 9, 2026.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will perform military-grade packaging and marking of components in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Key technical requirements include the use of heat-sealed barrier bags, Special Marking Code ZZ, and the utilization of specialized heat-sealing equipment and military-standard labeling systems to ensure products are ready for FOB Origin shipment. The project is managed under the Department of Defense for the DLA Weapons Support Land Supply Chain, with performance taking place at Fort Bliss, Texas. Interested parties must respond by November 9, 2026, for this opportunity categorized under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 9 hours ago

DEADLINE

Vehicular Suspension Strut Cartridge FabricationThis subcontract involves the fabrication of vehicular suspension strut cartridges, specifically Part Number 100953, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The work requires the use of precision CNC machining and assembly to meet all DLA Master technical and quality requirements, with the final finished cartridges delivered for use in Department of Defense operations. Performance of this contract takes place in Fort Bliss and mandates strict adherence to the Buy American Act and the Berry Amendment regarding material sourcing. Additionally, the contractor must comply with NIST SP 800-171 cybersecurity standards to ensure the protection of sensitive information. The project falls under NAICS code 336390.

Other Motor Vehicle Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Export PreparationThis subcontract for MIL-SPEC Packaging and Export Preparation supports the DLA Weapons Support Land Supply Chain. The selected provider is responsible for supplying specialized packaging materials and performing professional packing and marking services for prime contractors. All work must adhere to strict military standards, specifically MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. The scope of work involves using MIL-SPEC cushioning and dunnage to prepare brackets for FOB Origin shipment to South Korea. The final deliverable is a shipment-ready, labeled, and palletized bracket. This opportunity is categorized under NAICS code 488510 and is managed through the Department of Defense.

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Precision Machining/Fabrication of Vehicular Component BracketThis subcontract involves the precision machining and fabrication of one Vehicular Component Bracket, identified by NSN 2590-01-674-1574, for the DLA Weapons Support Land Supply Chain. The selected provider must utilize CNC milling or turning to manufacture the bracket according to the specific dimensions and tolerances outlined in the RA001 technical requirements. To be eligible, contractors must hold ISO 9001:2015, CMMC Level 2, and US/Canada Joint Certification Program certifications. The project falls under NAICS code 332710 and requires the delivery of one finished component. Responses are due by November 9, 2026.

POSTED

about 9 hours ago

DEADLINE

Engine Fuel Tank Supplier (NSN 2910016453684)This subcontract opportunity is issued by the Department of Defense under the DLA Weapons Support Land Supply Chain for the procurement of engine fuel tanks identified by NSN 2910016453684. The selected supplier will be responsible for manufacturing or sourcing these tanks for prime contractors, ensuring full compliance with the DLA Master List of Technical and Quality Requirements. Notably, the contract strictly prohibits the use of additive manufacturing processes in the production of these components. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336390. To be eligible, contractors must demonstrate compliance with NIST SP 800-171 and FAR 52.240-93 standards. Interested parties must submit their responses by November 12, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

Extension Drawer Slide SupplierThis subcontract opportunity is for a supplier to source or manufacture 15 extension drawer slides meeting NSN 5340-01-628-7861 specifications for the DLA Weapons Support Land Supply Chain. The project is designated as a Total Small Business Set-Aside under NAICS code 332510. The selected contractor must ensure full compliance with the Buy American Act and the Berry Amendment, while adhering to MIL-STD-129 and ASTM D3951 packaging standards. The final deliverables are to be shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

Freight and Transportation ServicesThis subcontract for Freight and Transportation Services involves the transport and delivery of vehicle components for prime contractors supporting Department of Defense projects. Managed by the DLA Weapons Support Land Supply Chain, the scope of work includes coordinating shipments from the manufacturer and managing ocean freight specifically utilizing U.S.-flag vessels. The contractor is responsible for providing rated on board vessel operating carrier's ocean bills of lading and ensuring strict compliance with MARAD reporting requirements. The project requires the successful delivery of 113 units to the destination in Barstow, California, accompanied by full shipping documentation. This effort falls under NAICS code 488330, with a response deadline set for November 9, 2026.

Navigational Services to Shipping

POSTED

about 9 hours ago

DEADLINE

Supply of Air Conditioning-Heating Collars (IVECO A4249)This subcontract involves the procurement and supply of 113 air conditioning-heating collars for prime contractors working on Department of Defense projects. The specific requirement is for IVECO Defence Vehicles S.P.A. A4249 part number 5801472199, which corresponds to NSN 4520150276028. The selected provider is responsible for sourcing, procuring, performing quality assurance, and managing the packaging for final delivery. Managed by the DLA Weapons Support Land Supply Chain, the contract requires the provider to be registered in both SAM.gov and WAWF. Performance for this requirement is centered in Barstow, California, under NAICS code 423810. The response deadline for this opportunity is November 9, 2026.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the DLA Weapons Support Land Supply Chain by providing specialized military-grade packaging for prime contractors delivering components to Guam. The scope of work involves the packaging of critical aerospace components, specifically a brake disc, ensuring all deliverables are shipment-ready and strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and labeling. The contractor is required to use MIL-SPEC compliant packing materials that are free from Class I ozone-depleting chemicals. Performance will take place in Santa Rita, Guam, under NAICS code 561910. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Brake Disc (NSN 2530-01-713-9297)This subcontract involves the manufacture of one high-precision brake disc, identified by NSN 2530-01-713-9297 and Part Number 627-8476-003, for the DLA Weapons Support Land Supply Chain. The project requires precision machining and grinding performed to Oshkosh Aerotech specifications using high-tolerance CNC machining centers. To qualify, the provider must obtain engineering source approval from the Government Design Control Activity. The contract is categorized under NAICS code 332710 and mandates strict adherence to NIST SP 800-171 and DFARS 252.204-7012 cybersecurity and data protection standards. Performance will take place in Santa Rita, with a response deadline set for November 9, 2026.

POSTED

about 9 hours ago

DEADLINE

Supply of Multiple Angle Sensor BracketsThis subcontract with the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the manufacture or procurement of Multiple Angle Sensor Brackets under NSN 5340016076959. The contractor is responsible for supplying 12 units of these specialized hardware brackets to prime contractors, with a strict delivery requirement of 5 days from the date of order. Performance for this contract is based in Anniston. Compliance with specific military and industry standards is mandatory, requiring all non-hazardous materials to be packaged according to ASTM D3951 and all shipments to be labeled per MIL-STD-129. The opportunity falls under NAICS code 332722 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing and Thread Gaging Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Quality Assurance and Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Material Certification and Production Testing Services

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

First Article Testing (FAT) Services for Rubber Materials

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

TEST, CHARACTERISTICS, D001-D003, 5D

Solicitation # SP450027F0545

Defense Logistics Agency

POSTED

DEADLINE

SURCH, EXPEDITED SVC, 3 BUSINESS DAYS

Solicitation # SP450026F6679

Defense Logistics Agency

POSTED

DEADLINE

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Environmental Testing and Quality Control

6982AF Central Federal Lands Divisi

POSTED

DEADLINE

in about 1 month

TUS and SAT Thermal Validation

POSTED

DEADLINE

Third-Party Quality Inspection and Certification

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Systems Integration & Qualification Testing

Naval Air Warfare Center Air Division

POSTED

DEADLINE

First Article Testing (FAT) for Cylinder Assembly

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS