Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on August 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

First Article Inspection (FAI) & Testing Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
MT&IS POTRERO FIRE STATION- FACILITY REPLACEMENT
Solicitation # RESD-PMDB 2026-12
The California Department of General Services, Real Estate Services Division, is soliciting professional Materials Testing and Inspection Services (MT&IS) for the replacement of the Potrero Fire Station for CALFIRE in San Diego County. The project involves the construction of a standard two-engine fire station on a site of approximately seven acres, with a total estimated construction cost of $23,587,800.00. The selected contractor will be responsible for providing all labor, equipment, and insurance for field laboratory testing, including inspections of soils, reinforcing steel, structural steel, aggregate, and concrete. All services must be managed through CIMB's Procore software and comply with LEED standards and specific technical certifications, such as ASTM D 3740 for soil testing and ASNT CP-189 for nondestructive testing. The contract is estimated to last twenty-four months, with a ten percent retention held for all progress payments. Selection is based on a two-step process involving a written Statement of Qualifications (SOQ) and oral interviews for a short list of typically three firms. Evaluation criteria focus on the experience of the firm, principals, and key personnel, as well as quality control and testing methodologies. Interested firms must submit their SOQ in PDF format via the designated DGS Box.com site by November 23, 2026. Required documentation includes Federal Form SF330, a letter of interest with a Federal Identification Number, and proof of California professional licensing and DIR registration. The final contract will be based on negotiated fixed rates for specific employee classifications and services.
California Department of General Services

POSTED

about 9 hours ago

DEADLINE

in 26 days
NAICS: 541380
New
SLED
Invitation For Bid P2675010, Analytical Testing Services
Solicitation # P2675010
The California Department of Fish and Wildlife (CDFW) is seeking a contractor to provide analytical testing services to support the Office of Spill Prevention Response Laboratory Program. The primary objective is to establish contingency capacity for water quality and nutrient analysis, ensuring continuity of services during catastrophic instrument failures or providing testing capabilities not available in-house. These services support research studies with partner state agencies and enforcement actions aimed at protecting state waters and identifying pollutants that impact wildlife. The contract has a maximum value of 31,000.00 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible contractors must possess California Environmental Laboratory Accreditation Program (ELAP) certification, particularly for wastewater and hazardous waste testing. Bidders are required to provide a Quality Assurance Manual, Method Detection Limits, and reporting limits for all parameters. The submission process requires several certifications, including the Darfur Contracting Act and the Bidder Declaration Form, with a deadline of November 16, 2026. Preferences and incentives are available for certified Small Businesses and Disabled Veteran Business Enterprises (DVBE), including a 5% bidding preference for small businesses and specific incentive rates for DVBE participation. The contractor is responsible for providing all pre-cleaned sample containers and preservatives, with these costs included in the quoted price.
California Department of Fish & Wildlife

POSTED

about 9 hours ago

DEADLINE

in 19 days

AI Contract Overview

Show more

The contract requires full First Article Inspection (FAI) services for LOX valve components in strict accordance with AS9102 standards, encompassing comprehensive dimensional verification, mandatory material certifications, and rigorous pressure and leak testing to ensure performance and safety. All inspection activities must be thoroughly documented and submitted to meet aerospace quality requirements, with an emphasis on traceability and compliance across every stage of the inspection process. The work is scoped as a subcontract under NAICS code 541380 and is issued by the Department of Defense through LAND SUPPLIER OPERATIONS SMSG, with responses due by August 17, 2026. Performance location details are unspecified, but the deliverables must align with federal defense quality expectations.

General Info

Full FAI for LOX valve components per AS9102, including testing, certifications, and documentation for DoD.

NAICS

541380 - Testing Laboratories and Services

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7MX-26-R-X062.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE, LIQUID OXYGEN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPERATIONS SMSG
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Conduct full First Article Inspection (FAI) per AS9102, including dimensional verification, material certification, pressure/leak testing, and documentation for LOX valve components.

More opportunities from Department Of Defense → LAND SUPPLIER OPERATIONS SMSG

Same awarding agency

NAICS: 332912
New
DIBBS
VALVE, LINEAR, DIRECTIONAL CONTROL
Solicitation # SPE7MX-26-R-X094
Solicitation SPE7MX-26-R-X094 is a request for a Fixed Price, Simplified Indefinite-Delivery Contract issued by DLA Land and Maritime for the acquisition of Linear Directional Control Valves, NSN 4810-01-607-7882. The contract structure consists of a three-year base period with two one-year option periods, not to exceed a total duration of 60 months. The maximum aggregate value of orders is capped at 3,833,642.64 USD, with an estimated annual demand quantity of 165 units. This is an unrestricted acquisition with a response deadline of November 27, 2026. The item is designated as a Navy Critical Safety Item, requiring strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Delivery is required within 195 days after the order date, with inspection and acceptance occurring at the point of origin. Award decisions will be based on a trade-off between price and non-price factors, including past performance, proposed delivery, surge and sustainment capabilities, and small business participation. All offerors must commit to a minimum annual small business participation of 3 percent and provide a Capability Assessment Plan to demonstrate their ability to sustain resupply for 18 months. Administrative requirements include mandatory EDI invoicing through the Wide Area Workflow system and compliance with CMMC and safeguarding controls for covered defense information. Offerors must be registered in the System for Award Management and provide a pricing proposal along with the required small business commitment documentation. The contract also incorporates FAR 52.246-2 for the inspection of fixed-price supplies and requires compliance with higher-level quality standards as specified in the contract schedule.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

3 days ago

DEADLINE

in 29 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS